The Lelit Bianca V3! - Full Review (+V2 Comparison)

Подписаться 22 тыс.

Просмотров 51 тыс.

50% 1

This is the new Lelit Bianca V3 - a dual boiler, PID-enabled, flow-controllable espresso machine that costs $3,200 at the time of recording. Today I’m going to give you my thoughts on this machine, how it compares to the V2, and if it may be the right machine for you.
Lelit Bianca: geni.us/Ui392Bf (Use "XRIS" for FREE Acaia Lunar with Espresso Machine Purchase! Have both items in cart at checkout!)
Read the written review: www.itsxris.com/post/lelit-bi...
My Coffee Gear: www.itsxris.com/brew
My Video Gear: www.itsxris.com/store
Related Videos:
Lelit Bianca V3 Full Review: • The Lelit Bianca V3! -...
Profitec Pro 700 Full Review: • The Profitec Pro 700: ...
Lelit Bianca V3 vs. Profitec Pro 700: • The Lelit Bianca V3 vs...
Lelit Bianca vs. Rocket Appartamento: • Lelit Bianca vs. Rocke...
Rocket Appartamento Full Review: • The Rocket Appartament...
--
▬▬▬▬ Links & Resources ▬▬▬▬
These links give me a small kickback at no extra charge to you. This is the easiest way to support my channel and helps me continue making content!
Find the written review: www.itsxris.com/learn
My Coffee Gear: www.itsxris.com/brew
My Video Gear: www.itsxris.com/store
Music Used: bit.ly/2TGvK2z
▬▬▬▬ Coffee Recommendations ▬▬▬▬
Espresso Machine (high end): geni.us/Ui392Bf (Code: XRIS for Free Acaia Lunar)
Espresso Machine (budget): geni.us/elWr
Coffee Grinder (high end): geni.us/weber-workshops-eg1
Coffee Grinder (mid-range): geni.us/df83
Coffee Grinder (budget): geni.us/AbOf
Espresso Baskets: geni.us/RXsp
Coffee Scale (high end): geni.us/h52r
Coffee Scale (budget): geni.us/WAqpOA0
All other recommendations: www.itsxris.com/brew
▬▬▬▬ Video Gear ▬▬▬▬
Video Camera: geni.us/LMtR
Photo Camera: geni.us/dT4hqN
Main Lens: geni.us/JSfmV0
B-Roll Lens: geni.us/ZeDDd
Tripod: geni.us/iYZwb
Lights: geni.us/kOpmtA
Main Microphone: geni.us/BS3YHlu
Audio Interface: geni.us/ut9q
Travel Camera: geni.us/sJxhXg
Travel Microphone: geni.us/nHFo
▬▬▬▬ Video Chapters ▬▬▬▬
0:00 - Intro
0:19 - Disclaimers
0:58 - Specs
2:44 - Build Quality
3:28 - V3 vs. V2
4:17 - Low Flow Mode
5:11 - Brew Temp Offset
5:52 - UI and Display
6:12 - Workflow
7:02 - Steam
7:24 - Espresso
7:45 - Conclusion
▬▬▬▬ Follow Me ▬▬▬▬
Instagram: / itsxris
My Website: www.itsxris.com/
▬▬▬▬▬ Credits ▬▬▬▬▬
Created by Xristian Tjakra
© 2023 Mocha Mondays, LLC
#LelitBianca #EspressoMachine #Review

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@itsxris 8 месяцев назад

Read the written version of the review here: www.itsxris.com/post/lelit-bianca-v3-review-endgame-worthy An updated list of what's currently on my coffee bar: www.itsxris.com/brew All the behind-the-scenes equipment I use to make my content: www.itsxris.com/store

@coffeeandmeats9755 Год назад

Awesome contents Xris! keep it up. Love, Bianca Fam

@flitcroftLA Год назад

Love my Bianca and I am so glad I didn’t wait for the V3 to make it to the US. Prices dropped before that and I paid over $700 less. I think the call on endgame is right. It’s hard to imagine ever needing anything else in a non-commercial environment. Performance is exceptional and the whole experience feels like glorious overkill, which is a luxury to wake up to every morning.

@chookchack Год назад

Yes i feel so lucky to have such machine waiting for me every morning. Didnt wait for v3 either paying 1k less.

@gosman949 Год назад

but you don't have the latest and greatest now!

@flitcroftLA Год назад

@@gosman949 What does the latest get me? Programming that I won't use and a faster warmup time that is irrelevant with a smart plug? No thanks. I waited to see the V3 update before buying but nothing gave me any value. That said, the V3 is a better machine at the same price. They made an incredible machine ever so slightly better.

@florianretzlaff7035 Год назад

Great Video as always. Can't wait for the comparison video between profitec and the lelit

@mesodan Год назад

There’ll be a whole lotta love for that video😅

@user-xy7mb5oi5m Год назад

Thank you for the video! Please tell me which is better Victoria Arduino or Lelit Bianca coffee machine?

@karc426 Год назад

Thanks for the review! It's really useful! :) I wonder how would you compare Bianca to Ascaso Baby T Plus? The former one is noticeable cheaper than the latter one recently.

@RINCHI12321 Год назад

Hello, May I clarify the bianca’s water flow at 100% paddle open is 52g is under low flow mode or normal mode

@randomvideosonline1 Год назад

Coming from a cheaper single boiler machine that heats up really fast I’m thinking the faster startup times and the sleep mode will be a big factor in me not getting frustrated with this machine. I can do the auto plug thing for the morning but I irregularly have a shot in the afternoon (work from home) to me this it think might be the biggest sleeper feature. And why my pay the premium over v1-2 models and also win out over the rotatory Rocket I’m considering….thoughts?

@hussainmahmoud7881 Год назад

Here it is same price as moded Profirec 600 (vib pump-joystick-flow valve). Difficult to decide

@ThisHandleIsTaken1 Год назад

Umm, have some issues getting your beans in the grinder at 06:15?? ;-). Great video!

@itsxris Год назад

haha yeah i left that bit in 😅

@lessmith3755 Год назад

apropos of the offset setting. It has recently occurred to me that there is no value for I that doesn't do more harm than good.There will always be an offset between the temperature probe ant the water temperature at the puck, and simply applying that known offset will be better. The integral loop in a PID algorithm looks at the average error between your set point and the temperature measurement, and applies a compensating control input to eventually null it out. But you never actually care about an offset between the set point and the temperature sensor since you're already taking the offset to the brew temperature into account when you choose the set point. All the I loop will do is delay your arrival at the target brew temperature.

@itsxris Год назад

thanks for the extra info on that note!

@aymanenani4266 Год назад

How do i hit a 9 baar ?

@takfukwong9521 Год назад

just wondering if the grouphead is E61 or L58E? as advertised in their website is L58E group..

@itsxris Год назад

I believe Lelit uses a slightly modified E61 they call L58E, but practically its just about the same

@cindysmith1123 Год назад

For steaming lattes, do you recommend the 2 or 4 hole tip? Great video!!!! Thank you!

@itsxris Год назад

i like the 2-hole because of the way i steam milk

@cindysmith1123 Год назад

@@lovisl. thank you!!! I will do the same. It’s so much fun learning!

@Kohizzzle 2 месяца назад

I'm considering upgrading from a shitty 300€ coffee maschine to an espresso machine. My research somehow always ended up with the Lelit Bianca. Is it a too big leap and I should go for an "intermediat" cheaper maschine? I can get my hands on a used, very new V2 for a very resonable price tag. thx 🙂

@redpitcher4455 Год назад

Any possibility of Profitec p800 review?

@itsxris Год назад

you'd be surprised how spot on you are 👀

@jasonmather3382 Год назад

If you were to entertain 7 to 10 people can a machine like the bianca or pro 700 do back to back shots while maintaining brew temp? I saw Kyle Rowsell’s video where he said he has to wait up to 3 min after doing 2 shots for the brew boiler temp to recover

@itsxris Год назад

I would argue you can certainly pull them back to back given your guests aren't too picky! If you have a shot dialed in with temperature in mind then I would suggest the wait period (and if your guests are particularly nitpicky about their coffee)

@jasonmather3382 Год назад

Xris thanks for that, I may go with a Rocket Giotto R or ECM Technika rather because I want that back to back ability for just in case reasons, perhaps the Giotto for the faster steam power from the copper boiler, thank you for replying and can’t wait for the Bianca v 700 vid

@aydiology Год назад

I still have a V1. Is it possible to upgrade to V3 with just replacing the LCC?

@dr.angerous Год назад

good question but I don't think so

@itsxris Год назад

i wouldnt know - probably a better question for the vendor you bought it from :)

@rodiona8781 Год назад

You can upgrade to the V2 by replacing the LCC for about $100. There are some hardware changes but the V2 LCC software will mostly have you set and most of the changes are cosmetic. I can't find an upgrade from V2 to V3. From what I understand it's a LCC and solenoid change but I don't see anything online

@Matt_Yang Год назад

Hi, greetings from Taiwan Wondering which one is better Profitec 700 or Bianca?

@itsxris Год назад

my comparison video will be out in 1-2 days!

@Matt_Yang Год назад

@@itsxris got you👍

@heinrichgunther8025 Год назад

I’m here over in Germany and I can get the V3 for 1700€ rn. I don’t know why I’m hesitating to click the order button

@bogdanadzic9305 Год назад

I found it fir 1950 in germany where did u find it for 1700 xd

@Tonyanagnos Год назад

As a technician, I would like to see the inside because Letit does not have a great built quality with lots of nylon hoses and elbow connections which leak over time.

@gosman949 Год назад

interesting non-bias viewpoint!

@sztojanbarna Год назад

Crazy how expensive they sell it in the US. We can get I under 2000 euros here in Europe.

@marehetdejager6726 Год назад

How much in Europe

@emreisiklar Год назад

Is it worth to upgrade from max x ?

@itsxris Год назад

upgrade your grinder before the machine!

@emreisiklar Год назад

@@itsxris eureka mignon specialita at the moment

@bkik5 Год назад

One to two shots per day? That's all?

@rcpmac Год назад

Not sure why you would compare it to the apartmento... very different class machines and half the price.

@itsxris Год назад

because I've owned both and am sure there's enough people curious anyway

@ChrisBrown- Год назад

If I was paying that sort off money for a machine, I would want the panels to meet

@dr.angerous Год назад

It is really perfect here, his got probably damaged, because yes, the steel is not as thick as some other machines could be thicker.

@itsxris Год назад

its like this on both my Bianca's

@dr.angerous Год назад

@@itsxris i rechecked and mine v3 made in april is almost perfectly matching, literally not even noticeable that it's a split there :)

@dr.angerous Год назад

@@itsxris and the labels seems pretty spot on also, they are lower than yours

@Yirgamalabar Год назад

@@itsxris @krtek - same here. The panels are perfectly aligned and the labels are lower and exactly where they should be. My V3 is the EU version.

@andrewgibbs3121 Год назад

The code XRIS is no longer working

@johnadams9044 Год назад

Turn, turn, turn.

@dr.angerous Год назад

Hehe I bought mine in eu for about 2050$ last week 😂

@itsxris Год назад

killer deal! eu prices always seem to be better lol

@Sn0wman5 Год назад

Me too! =)

@dr.angerous Год назад

@@Sn0wman5 :)

@marehetdejager6726 Год назад

Where and are you happy with it

@dr.angerous Год назад

@@marehetdejager6726 ye very happy. I cannot drink any regular coffee anywhere 😂

@qwe7410 Год назад

The start up time ready in 12 minutes is totally misleading. It takes at least 40 minutes to stabilise the grouphead measured with probes. Making coffee before the grouphead is fully warm makes bad espressos. The abrupt change in pressure during the automatic flow control disrupts the flow and cause channelling issues. If the aim of having the extra features are for better coffee, these mistakes would have ruined the espresso. The biggest attribute to how the coffee will turn out is the control in the grinder which affects the flow rate and the taste. Much more than these flimsy bell and whistles that could cause a dent to the machine's longevity. What the other technician said is right, lelit are not as well built. They going the China companies direction of adding many unnecessary features which affects it's longevity. The parts and placement of the key components are also not very intelligent. I start to wonder is this engineered or co produced in China as the engineering approach looks very similar to the China espresso machines.