Thank you very very much! I unbricked my Nintendo Switch after 3 years or so after updating my nand backup with this guide to the latest firmware and it looks like it works now!
Absolute legend, my switch has been bricked for a few weeks now, tried a few different methods but due to it being on the latest software it never worked, have now managed to get it working with this method 10/10 would recommend as a true legend
After mounting the system partition, what happens if you delete everything stored in the "save" folder and only copy the two generated files "120" and "80000000"? as well as with the registered folder. 8:49
Thanks I was able to troubleshoot the switch I bought that was stuck on the second logo, now it launches but the wifi does not work, from what I found on the internet a problem on this wifi chip can brick the console on older firmware but not on recent ones, if I understood this tutorial I updated the console firmware by directly modifying the console files? Thanks again !
Yo bro can you help me my 3ds wont play games that i downloaded recently (before the new update) instead itll give me an arm11 error, i tried to fix it can you help me
@sthetix what according to you would be a better investment in terms of modding and future proofing , a hackable V1 switch now or switch 2 in 2025 on launch day
Unfortunately its not the same for me. I want to fix emuMMC that is 10GB. And the eMMC ALL is not active. The function is in gray and cannot be pressed. For MMC the function is present, but not for SD emuMMC RAW partition ON.
An excellent video as always !!! I would also like to ask if it is possible to unban a banned console by formatting and then use different keys while following the guide.
I need help! when trying to mount the system stays on mounting... no window to install the driver i installed from the folder and still keeps the same. Any advise?
Hello, could you tell me what method I could follow for an OLED switch that has a purple screen? When trying to restore the nand it reports "failed to init", it seems that it no longer communicates with the emunand? This console was used for a while in the dock, after which it presented this error and never returned.
you can do what I did in the video. but if the emmc is corrupted, you need to replace it and try to do the level 3 unbrick guide. if u have the backup nand, you can try to restore it
I have basically the same problem but i can restore the nand but then i get pkg2 read error. The backup is known to work, i made an emunand from it to test it. When i flash boot0,1 after the full gpp the partitions get wiped. Do you think my eMMC is dead and needs to be replaced or i can fix it with instinct and maybe reflow?
I need try tomorrow , I have 2 switch OLED I make mistake I connect Dat0 to B , and now only hekate work but don’t boot nothing ( only black screen ) 😭
Hi, I need some help. I got stuck with the 2b error and hence I started out with this guide. My sysNand boots fine and it was the emu that was causing the 2b atmosphere panic. What happened was as below: 1. The back up step did partial restore because of no space in the emuNand partition. I do not know if this is a problem but I am stating that for completeness. I moved out the bin files to pc and completed the backup. So now my backup folder has boo1 and boot1 and rawnand.bin.08 to rawnand.bin.14. 2. Completed all the other steps and at the restore step I got a file not found when I tried to restore boot0 and boot1. I moved these to the emummc folder instead of leaving it at the restore folder and that did the trick. But then restore ALL option was grayed out - I assume this is because of step 1 partial back up issue. Now when I launch cfw I got stuck with pkg1/pkg2 mismatch, old hekate error. Now I have no idea what to do. Do I go level 2 (even then wont step 1 still be an issue) and do all steps there for my emuNand partition. Should I do level 1 for sysNand to get its firmware up? If so how do I fix the emuNand not booting into cfw? Also ny sysNand is stuck at 12.0.1 version, so I am not sure if that is an issue. Also I did extract the latest HATS onto my SD card and I do have a nand back up on my PC from when I did the CFW for the very first time. Can you please help me out?
@@sthetixofficial Just one question - if partition size is 29 GB again I will have the same space issue for emuNand right, so how much should I allocate when I do the partitioning?
Do you have a specific guide for if my switch, following a hard freeze during a game on my emummc, now only boots to the Nintendo logo or to Atmosphere once I launch it using my Hekate injection as usual? I am given a black screen in both instances and not sure if your in brick guides cover this exact scenario. Thanks
@@sthetixofficial sure will take a look, so it's possible my nand got corrupted and that's why the switch won't turn on past Nintendo logo even without an SD card in?
Thanks for the Guide! I can't install any NSP over 4GB after doing this, i believer cause my card is fat32, but the capacity is 128GB so i know i have the space, any thoughts?
I want to create Introductory video for new3ds cfw. I have created a backup file and will change to use a new sdcard. How do I restore it? Do I have to install GM9 or what do I do? Please use the restore method, not the file transfer method.
I have. I did your latest unbrick method. And it showed me this after restoring the backup, "You're eMMC is initialized in slower mode! This might mean hardware issues!"
This could be affected by the modchip itself. What modchip do you use? it doesnt mean the emmc chip is damaged but the modchip could sent a fake signal about it.
Bro Sthetix, my kid accidentalliy connected the switch to wifi and the console encountered keeps rebooting with an error code: 2123-0011 (0x167b). Will this method fix the error my console has? Thx
I have a “pkg 2 decryption failed! Pkg1/Pkg2 mismatch or old hakate! Failed to launch Hos!” Error, I use the emummc part of the switch so I can play my games but I’m unsure which level should I start of how to fix it and I’m lost I appreciate it if there’s a fix for this, thank you.
@@sthetixofficial no but if I do use the level 2 should I use the new or the old level 2 method? I mainly want to get my switch fix so I can play the Emunand part of the switch because that’s what I use.
@@sthetixofficial ah nice banget, god bless you sekeluarga yah bang sthetix, aku akan coba sampe mentok buat CFWin sendiri, nanti kalo gk keberatan pas mentok aku tanya2 lagi ya 🫡
If I wanna play a legit game (bought new by myself) online but still wanna use some overclocking, will I be safe from a ban, if I play that game online on the SYSMMC (its clean there, no cheats and no pirated games at all) ?
@@sthetixofficial Thanks, I´ll look that up. You´re truly my Nr. 1 modder on RU-vid. If I would ever be in Indonesia one day, I´m gonna visit your shop
@@sthetixofficial i use emmchaccgen gui windows... The boot0 and boot1 is not same the size for Orginal boot1 boot0 that I have on my pc...is that normal
thanks for this information !!! and please I have 2 switch with nand scrashed and error tittle id 01xxx2B x=0 (0xffE) but your 4 tutorials no cant fix :( thanks for all saludos desde colombia !!!
