The Mud Truck Is Going All BILLET!!! One Bolt At A Time!!! 

You could do a whole shop clean up series! That place needs some love lol

We need a Jh x Boosted Boiz collaboration. Go help out them boys with their diesel.

The parking lot is always full JH don't have a shortage of work that's for sure.when you do good work you will always have plenty of work... great job on the builds guys

I think you need the Cleet and Squirrel tree service. LoL 🤣 and their bodywork service. 😎

112° cold start 😂😂

When are you gonna do some truck pulls!! That would be awesome!!

"You almost got it" Had me cracking up.

I was thinking you may have to call Cleet's Towing to help with that stump! 😂

The amount of content is appreciated!

Got those o-ficial safety crocs of when swinging that chain saw 😂

"Its going to go soon." That whole segmand had me laughing out loud.

Just a suggestion for drag and drive is an additional fuel cell that detaches for events and less stops for sure!

Proud of this channel

The frame and engine is looking great guys. I wish the trans was....brighter in color.

LMFAO he said tearing up my grass and saying my shop well if it's yours clean it up yourself instead of JH 😂🤣😂🤣

Great job

Grüße aus Deutschland 🙂

I was waiting for the beef jerkey commercial” messin with JH” during the tree stump removal. Oh ya..it’s moving 😂😂

Hi diff,great to see you on the roll again,may you be blessed.Enjoy your conten.

I think the jack shaft is a bit over extended too, that would be a good candidate for the 1" spacer at the transmission output flange. Love the videos btw

Winning the event a couple months back definitely making the content better. Goodshit JH

Be cool to see you and Wyatt to go head to head once you figure it out

Hey Justin I may have missed you explain this but I'm curious what made you select the 6.0 for this build?

Boys are killing it !!! Absolutely love the content. Keepem coming brother. Let's freaking goooooo!!!!!

Dukes of Justin just PUMPING out the content lately! Thanks you guys

Those 7.3 love running the starters

Justin thanks for the sweet camera angle/view when the tree finally got pulled out, glad i didn't miss it.🙄🤣

Hahaha.. Justin is hilarious. Had me laughing..

All you gotta do is rent a forestry attachment Or a little stop grinder. Some are expensive, but I'm sure you And some friends. I have stumps that they would like. To remove. Go in together and rent it.

Its about time you got some BD products. Thems some smart Canadians. I've been to their facilities before it was even close to what it is now

Love it if you’re going to do it do it right and you got all the right parts

you gotta put some blue fluorescent lights underneath that how to look mad at night

You're growing brother! The first time I saw you on Cleetus I said "this guy needs his own channel!"

If you run washers you dont have to worry about the impact maring the paint

Got nothing but respect for your channel discovered you through Cletus... And you're trying to grow your channel and I understand and run a business in the background... McFarland does all those things and keeps it exciting just like you used to.... You and your buddy are a great team... But when it comes to video content you got to get back to being crazy ass JH diesel

Great content thanks for sharing

Love your videos jh !

Coming from a 6.7 Cummins guy. I MAY or may not totally agree with the bd diesel mani/turbo and things.

Are you stunned, Willard? All of it.

JH get yourself a Yankum Rope.

I thought you would have used the Army truck 💪💪

Fantastic! Keep up the good work!

You missed the shot of the tree actually coming lmao. Love the video tho

You answered my question before I asked... I was wounding why you didn't use air tools but it makes sense

Justin deserves some more beef jerky! He earns it. Channel keeps getting better and better.

Just rent a Stump Grinder! Cheap and can grind it down flush

love the build, dont worry about how long it takes rome was not built in a day :D

I’m glad I’m not the only one who’s worried about messing up fresh paint!

I think you forgot the exhaust manifold gasket when you installed the BD diesel manifolds

Justin is hilarious keep going it’s coming oh yea it’s coming it’s leaning. 😂😂😂😂

Jh, your supposed to say, “it’s a 7.3 it’ll pull a house down” and Sam will buff that shipping crate bed right out!

I'm glad to see y'all doing your own work. Instead of like other RU-vidrs just pointing saying fix it while I sit in the ac. But will be out when it's done to try to tear it up like a little kid. Never changed from 10 yr old brain. Just glad y'all are actually putting in the work is all 👍

that quad should be a sweet build the krx 450 sittin in the garage and i was gonna say yall should cut the tree a bit to make it weaker and it may drop over

That transmission clashes with all the JH green parts 🤔

JH is stepping up his game all around!!!

I feeking love Justin givin it to Justin. Lol. Aww yeah, she's really startin to wiggle now!!! :)

Another great one

The 🐘 in the room is that dark green transmission 😅🤷 who decided on that ? = your fired lol

The yellow truck is my favorite!!!

Hell, yes, we have

🤑🤑Sounds like you're putting that helicopter money back into renovating the shop 🤯🤯

I would love to see you bring the drag truck that you just built-in the monster truck that you're building right now to Sima. I'd like to say mega truck

7.3 power 😂😂

When you pull out a stump you tie the rope to the very top.....it's called leverage you chuckle heads

One bolt at a time? Might take a while to get there. 😉

J mite want to extend that jack shaft she looks hung out there too brother

woke that frog up from his nap smh, you gotta add the frog to the new wrap for it. it fits the color scheme

J and J tree services 🔥

You should do a yard clean up video

I dont wanna mess up the paint on the driveshaft… but i throw the wrench on the frame 😂😂😂

You are funny the roots are huge on a tree that size

That blue and green is something else.

You guys need to take a look at zip ties and bias plies for tips on pulling stuff with old fords

It's a 7.3l, it will pull the house down.

I heard if you build up enough layers of paint it becomes scratch-proof anyway😂😂

Instead of 7.3 pull a house down JH said pull a tree out

Bring the black nasty duramax back

That tree was putting up a fight

Hahahaha oh yeah she realy start to wiggle now!😂😂😂😂😂

So what I'm hearing is you're challenging cleetus to a drag race as soon as you get it dialed in!!!

I keep hearing mud truck but its starting to look more like a show truck. Not wanting to nick paint during assembly and all. How long after a mud hole does it take to clean the rig back to show and shine status?

best borrow Garret's BobCat to get that oak tree out.... that Ford doesn't have enough a$$

If jh won 100k he wouldn't tell anyone but thier would be signs.

I know a guy...... 🤘🤘

Like this comment for more drag truck content 👌🏻

ha they JH what bout shop wipes in headers on right

Ok Yeller needs some power upgrades and different gears before it can dream about pulling out an Oak Tree before you cut on the tree. I’m by no means disappointed in its performance!!!

JH and Justin, y'all rock! Peace

You guys better call Wyatt/Boosted boys out someday

You should pressure wash side of that container/trailer unit. Would make shop look so much better for videos and take 10min.

Its close..... 👀🤣🤣

Hello, / & good 4u & yur new channel 😀

Why not use the manifold gaskets that came with them ? I know they didnt come factory with them but wondering why not use gaskets?

I thought Ole Yellow could tear a house down 😅

Are the front and rear drive shafts switched at all?

is it moving?! Noo! hahahaha

I was wondering if you're still gonna be putting.Hydraulic steps on your mega truck the year building

Hello sir, I'm Ed. I have a 07 power stroke and I wanted to ask you a question about loosing fuel pressure under load. I'm a 30 year diesel mechanic, I'm certified in cummins heavy line. The 6.0 is fairly familiar, worked for International back in mid 90's. I can pay for your help, just don't want to throw parts in to try to fix. Thanks for any info.

Scrap run 🧐🤨

I am to 420 for the commentary 😅😅😅