The New Raspberry Pi HQ Camera Is Awesome! - Set Up And Testing

Подписаться 1,2 млн

Просмотров 415 тыс.

50% 1

In this video, we take a look at Set up Nad test out the all-new Raspberry Pi HQ Camera along with both available at launch, the 6MM Wide-angle, and the 16MM Telephoto lens.
With a Sony IMX477R stacked, back-illuminated sensor, @ 12.3 megapixels this is the best Raspberry Pi camera to date!
This video is sponsored by MICRO CENTER but all options are my own.
Raspberry Pi HQ Camera for Raspberry Pi 4: rebrand.ly/8px...
Raspberry Pi 16mm Telephoto Lens for HQ Camera: rebrand.ly/kmn...
Raspberry Pi 6mm Wide Angle Lens for HQ Camera: rebrand.ly/m8d...
Browse Micro Center’s work and learn from home products: rebrand.ly/ts4...
Practicing social distancing? Stay connected and join the Micro Center Community: rebrand.ly/m4n...
Follow Me On Twitter: / theetaprime
Follow Me On Instagram: / etaprime
Equipment I Use:
Screen Capture Device: amzn.to/2STpX4C
Tool Kit: amzn.to/2M6l9WS
Soldering Station: amzn.to/2FtdVeu
Camera: amzn.to/2M6KFLB
Tripod: amzn.to/2CmdYVY
Raspberry Pi 3 B Plus: amzn.to/2DTF0Db
Flirc Case: amzn.to/2OBQTXz
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
This video and Channel and Video are for viewers 14 years older and up.
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY! DISCLAIMER: Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. No Games Or Applications Are Included Or Added On Or To Any Device In This Video

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 464

@ledhceb 4 года назад

Fantastic. One detail though, "Although I'm sure some companies will release more lenses for this". Actually there are tens of thousands of Lenses that will mount on this immediately. The module uses a "C-Mount" and "CS-Mount" (C Short) standard screw mount lens. The C-Mount standard has been around since 1926 for 16mm film cameras and I'd suspect that the original 94 year old lenses would work. Basically just look for any C-mount or CS-mount rated for a 1/2.3" format or larger. But the "sensor format" is very important to check on such lenses. This specifies the size of the sensor and if you buy a C-Mount lens with a smaller format size you will get the edges of your image cut off. You can also get a wide variety of adapters to mount anything from a DSLR lens to an astronomical telescope. In fact one of the first things I'm going to slap my module on is an 8' Schmidt Cassegrain Telescope.

@Teslanaut 4 года назад

Do you think Pi + new cam module + a telescope could make for good stellar photography or observation?

@tomf3150 4 года назад

@@TeslanautYou might need to remove the ir filter on the camera module, and check first if it support 5s-20s long exposures.

@steameier8590 4 года назад

@@tomf3150 does the lences or the sensor have the IR filter? what do I need for macro/microscopic filming, is one telescopic lence useful therefor?

@ledhceb 4 года назад

@@tomf3150 Definitely not going to work well for high end long exposure Deep Sky Object DSO imaging, no cooling and the pixels are too small, I'd go for a Revolution Imaging product for a cheap option for that. OTOH this is reasonably well suited for Lunar and Planetary Imaging with image stacking.and drizzling I'm very interested with respect to Lunar Imaging at high frame rates to achieve "Lucky" imaging. That said, the bare board and low cost makes rigging a Peltier cooler a trivial option with negligible downsides. It's like overclocking, you aren't going to get insane performance but the downside is so low that it is a no brainer to do. Of course this is a bit OT for a emulation and gaming channel :)

@wilkgr 4 года назад

Pity that my existing MFT lenses can't be adapted to this.

@immortalsofar5314 4 года назад

NOTE: The camera port on the Pi zero opens at a different angle to the Pi. Attempting to open it in the same way *will* result in it breaking! Or...so I've heard. .

@obed.raimundo 4 года назад

The Micro Center near me has an arcade/emulation area with "As used by ETA PRIME" on products, lol

@mahdiyussuf9804 4 года назад

LOL sometimes I wonder who the guys who run Microcenter are. They seem to have a more liberal culture as opposed to Best Buy or something

@elireloaded 4 года назад

I don't get it..

@foxxyytofficial 4 года назад

i would love to see it, haha

@jamesstewart7784 4 года назад

@@elireloaded they advertise products that ETA prime has shown on the channel and state that there products ETA has used as an endorsment for the item.

@jerricabenton842 4 года назад

wow, so it's a sponsor that also advertises the show they sponsor... that's a good idea!

@DoomRater 4 года назад

Holy crap a sponsor that I actually want to see more of? WHAT TIMELINE IS THIS! Too bad they're not over in Vermont.

@madcrowmaxwell 4 года назад

The Microcenter in Cambridge, MA is like nerd heaven. Depending on where you are in VT, it could be a day trip or it might be too far.

@DoomRater 4 года назад

@@madcrowmaxwell yeah that's a full days travel both ways and I have no car. If I were still looking on Michigan and had my car, it'd be about the same length of drive but I had friends who would have enjoyed looking as well and I would have taken the road trip.

@iouiou2121 4 года назад

I love microcenter has many single boards, all the pc components and 3d printing crap I need its everything bestbuy should be. (with all the consumer level bs too like prebuilts and tvs etc...) Just wish mine was a little bit closer but yeah you got a lot longer of travel than me I complain about the hour I have to drive lol.

@GbengaOguntuase 4 года назад

Amen to that

@DoomRater 4 года назад

@Julien Bombilian Kinda hard to figure out what you're responding to with a single word response.

@dzulk9 4 года назад

It kinda becomes like old school photography.... Instead of messing with chemical, we mess with codes now.

@ronmiller7916 4 года назад

It ain't like film, developer, fixer, etc. You've never developed film or printed in a darkroom.

@zbnmth 3 года назад

@@ronmiller7916 I have and I concur with Dzulk. It is, of course, not identical by a long shot ànd the aspects you tweak are different. But the do-it-yourself aspect is closer now than when the first digital cameras were released. It was a frivolous food-for-thought from Dzulk which I enjoyed.

@spokehedz 4 года назад

I'm thinking about a portable setup too. PI4, USBC battery pack strapped to the leg(s) of the tripod. I'll make a Ad-Hoc wifi on the Pi, use VNC on my phone to connect to the PI, so my phone will be the "screen" of the PI.

@ejpmonline 4 года назад

a rpi4 digital camera (need a custom case with camera mount) with touch screen and 5000mah lithium battery.. wow this is exciting! :D open source digital camera

@UNSCPILOT 3 года назад

Planning to get one, remove the IR filter, and build it into a full time Infrared camera to mess around with, since I have a bunch of Pi's and parts laying around anyway, and if I can I'm going to make it compatible with the 52mm filters my DSLR uses to get some extra versatility for minimal extra cost

@hoeurd 4 года назад

Wow! I am blown away by the quality of the sensor and the two lenses. All we need now is a specialized Polaroid style case with an integrated high quality anti-glare screen to be used as a viewfinder and throw in some buttons for some manual focusing and a few for customization. Sounds like a potential Kickstarter project ;)

@xFOURJACKSx 4 года назад

This would be really cool to see done as a dedicated Pi camera with a nice case specific for shooting!

@boryshacker 4 года назад

With this power i can see at least fullhd video 10bit 422 for under 100$... just overkill

@seedless 4 года назад

When doing any focus adjustment you should open the aperture all the way to compensate for depth of field. Sharp focus in a bright scene will be soft in low light if you don't.

@NewAgeDIY 4 года назад

I have read about this camera just a few days ago. Placing a order for it and the telephoto lens as soon as stock is available in Canada. I use a number of raspberry Pi’s using MotionEyesOS and I have on camera covering my backyard. With the standard V2 camera I only get a large image and can’t see the work shed that I need covered. But now with this new camera and telephoto lens I should be able to get a much better recording and still images. With this new camera anyone that’s interested in a DIY security cameras that are self contained , independent and completely off grid can now get a much better image coverage for just a few dollars more. Thanks again for providing this very important product review. I was holding off on buying it until I had a better understanding of its Quality and features, but now I do!

@paulwilson425 4 года назад

looking forward to the followup video on this. maybe you can also look in to a ip-streaming setup that you can either pickup on another RPI as a security rig,or on a windows system running streaming software like OBS

@singlehuelife 4 года назад

Hey man, I just wanted to say over the past 2 years you’ve been inspiring me do raspberry pi projects, and I’ve basically watched every video on your channel, old and new. Every time you upload I’m always there watching, and I always find your voice calming to listen to when watching these videos. Just figured I’d take the time since I’m here so early to tell you.

@asunavk69 4 года назад

Same, tho i wouldn't say bc its calming but more like informative and quiet the fun to watch, and yes i think this sure needs more attention.

@echofightr2681 4 года назад

I Love Microcenter. That is where I have gotten all my Pi stuff as well as my tinkerboard. As well as PC parts (between them and Newegg) they have excellent deals in the store. As always love your videos and glad you got an Awesome sponsor this time.

@Stormpix 4 года назад

Thanks for this video - seeing that the lens has manual aperture control is what sold me - being unable to adjust the exposure effectively is what has ruined some of my Rpi camera projects (like trying to take pictures at our bird feeder, which is brightly backlit). I placed an order at our local MicroCenter last night for the camera and the telephoto lens because of your video. :). MicroCenter is awesome - even though our nearest one is about 75 miles away, I love going there.

@johnbilodeau6296 4 года назад

I would like to know if the camera is compatible with the jetson nano at the moment (for recording in 4K30) and if a pulse is send by default on GPO pin at the back on each new frame. Thanks!

@ninline2000 4 года назад

I love your sponsor. Micro Center is Geek Heaven. Thanks for the video. Looking forward to seeing more on the new camera. Maybe a surveillance setup?

@Arek_R. 4 года назад

Wow this camera is what I was looking for. At work I might have a project where we use RPI + OpenCV + Camera to count people entering stores/supermarkets during pandemics and it would eliminate the need for some valuable personnel just counting people going in and out. I was concerned that most of the cameras for RPI weren't very well suited for such application due to the limited resolution and optics. This one should be perfect. Shame that it's out of stock everywhere already :/

@intaro 4 года назад

ngl. would be curious if this could be used for a streaming/ recording camera (in place of a webcam) how effective and better it would be.

@1947mercury123 4 года назад

This would be awesome for star trail photography!

@taotechnique 4 года назад

I absolutely love Micro Center. It is Heaven on Earth for nerds. They have everything, and their prices are unbeatable. They have the best warranties, and they stand behind the products they sell.

@MartinPaoloni 4 года назад

Sponsored by MicroCenter? NICE. Love those guys! It's like Disneyland for people like us!

@Colin_Ames 4 года назад

Thanks for a good review of the camera. I really miss Micro Center. When I lived in Michigan it was my favorite toy store. Sadly there isn’t one in southern Nevada. The price one pays for escaping from snow, I guess.

@AAa-tn5rz 4 года назад

Could you please test the video? Does it record video in raw? What resolution? How about the removing the ir cut filter and some pics from that but will void your warranty. Love to see video quality. Need to see skin tones.

@masterneme 4 года назад

I've read that you can record up to 1080p30 and potentially 1080p60 with overclocking using h264. I'd also like to see some footage.

@FreakinKatGaming 4 года назад

Of course man, usually any camera can do video, but this rasberry pi ur talking about theyre the poster child for diy open source projects that let you get creative.

@nialltracey2599 4 года назад

Is it possible to capture video with audio on RPi yet?

@jorgeZDT 4 года назад

Maybe a video using these cameras as home surveillance? I’d like to see how these do

@DigitalJedi 4 года назад

Gotta be better than whatever's used to take pictures of bigfoot.

@xiangli1340 4 года назад

maybe you want to try "motion" on raspi. It will get the job done.

@jorgeZDT 4 года назад

Captain_Cupcake lol it’s gotta be

@blackhatfreak 4 года назад

Yeah "home" surveillance.

@anusha1966 4 года назад

Would be better than bank surveillance cameras

@LinDa-dw4mg 4 года назад

if you need a weatherproof housing for outdoor shots I found the tubematics tube case very robust. Its for a pi4 and the hq camera

@foch3 4 года назад

Are you voicing this video while you shoot? It's always so clear and well spoken. Great videos.

@simonstucki 4 года назад

nice video thanks. I'm not sure but I think the way to adjust the backfocus for a given lens/camera combo is you have to turn the lens to infinity then look for something to focus on that is far away (the longer the lens, the further away but even for 16mm a few m should be enough, but if you want to be sure, you can always use the moon). with the lens "locked" to infinity adjust the backfocus so that your chosen subject is in focus and lock the backfocus. now whatever you do you can't focus past infinity and you get the maximum close focusing abilities without sacrificing the possibility to also focus to infinity...

@legin3753 4 года назад

Great to see u getting sponsor u deserve it 🤗

@frostyrusselli 4 года назад

1:58 So many fan cooler for gaming pc in Shop 😍

@spokehedz 4 года назад

I don't get why people hate on the W small camera connector. It is just a connector. The cables that go from the small connector to the larger connecter are EASILY found for less than a dollar--and there are many, many perfectly suitable cameras that have the appropriate cable end already for the W specifically. They make handy little "room monitoring" webcams for a home automation setup.

@BuriBuriZ 4 года назад

print 3d case to put everything together, the pi, camera, battery pack and lcd display. Make use of GPIO pin to make shutter button or you can just use touchscreen display panel. Et voila, raspi-based portable digital camera.

@davidleigh6196 4 года назад

Why?? Don’t you already have a phone that’s smaller, lighter, more convenient, with a camera that’s as good or better?

@BuriBuriZ 4 года назад

@@davidleigh6196 its not about that. Its just curiosity, the feeling of satisfaction when you can make something and it works.

@admacdo 4 года назад

CS and C mounts to almost any lens are available on ebay. I have a Nikon F mount to CS adaptor which screws straight on to these and are outstanding.

@MrMunkyMeat 4 года назад

Cool, I am glad you posted this. I have been considering the value of moving to a couple of these for a podcast set up. I am really looking forward to your next videos about the video performance.

@scharkalvin 4 года назад

Is the lens for this camera a "C" mount? What I'd like to see is an adapter that allows the camera to be used in a standard 1.25" telescope eyepiece draw tube. It might make a nice astrocam with a large telescope.

@RonLaws 4 года назад

www.raspberrypi.org/products/raspberry-pi-high-quality-camera/

@enjoythepig 4 года назад

I really love having a MicroCenter nearby. I am the IT manager for a cold storage plant and often I will buy things like printers and TVs there for less than Amazon. Also their SD, USB Stick, and SBC pricing is typically half what you'd pay on Amazon. The other day I had to buy some sort of mesh system for the WiFi in my house. If I had waited one more day my girlfriend probably would've killed me, so I guess they saved my life. The salesperson there recommended I get a Ubiquiti Networks UniFi nanoHD AC2000 Dual-Band Wireless Access Point, instead of a mesh system, and boy was she right! I went from about 20-40mbs around the house for 250mbs everywhere. An amazing store!

@victororo462 4 года назад

Dude, this is awesome! I can just imagine where this is going to go. A 360 lens would be badass!

@ErgsYT 3 года назад

You can probably program one that has 6 cameras all around and just put them together

@eloyaldao435 4 года назад

It looks Amazing!! Can you upload the original images in the video description to take a look without RU-vid compression, please?

@H3xx99 4 года назад

A 3d printed pi camera case with flash, touch screen and focusing motors would be pretty awesome.

@AtlantaTerry 4 года назад

As a professional photographer for over 50 years, may I make a suggestion? Adjust the back focus on something that is very far away (infinity). Good subjects: clouds, mountains, the moon, tall buildings, cell phone towers, etc. That way, the lens will be able to easily focus on anything closer. Once the back focus is set then if a lens has distance markings (3, 5, 7, 10 feet, etc.), then those should be fairly accurate for correct focus. Terry Thomas... the photographer Atlanta, Georgia USA

@brick4353 4 года назад

HA! THEY DO HAVE ONE IN PENNSYLVANIA Edit: I realize i should clarify, i am talking about the micro center store.

@PDRIFT86 4 года назад

Yes they do. It's in St. Davids near Philly. I was there on Monday looking for a new graffics card

@brick4353 4 года назад

@@PDRIFT86 the closest one is that one. Its still 3 hours away.

@PDRIFT86 4 года назад

@@brick4353 yeah i think they're is only 1 in PA. It's about an hour drive for me but still not too bad when I need filament for my printers or an extra pi.

@brick4353 4 года назад

@@PDRIFT86 Lucky. I can look out my window and literally see Maryland. The only way i could live closer, without living in Maryland, is on the other side of the road. Their property ends at the PA/MD line.

@PUDINHED 4 года назад

Im in NY and the closest one to me is 15 mins over the border in NJ. I went there a couple weeks ago (needed a monitor for working from home) and had to wait 45 mins to enter the store. It may not be too much fun going there for a few more weeks.

@ShadeAssault 4 года назад

First thought... get a rechargeable battery module + battery, and a LCD screen and 3d model/print a case to make it a RPi camera body. Use the GPIO to add some small buttons that activate a .py script to take pictures. Maybe I'll have to look into actually doing this.

@stripeyhorse 4 года назад

Can you test with the zero. Wondering if it’s got enough juice for this camera.

@ianhill20101 4 года назад

Second that.

@mtslyh 4 года назад

Micro center is awesome. We have one here in my town. For makers, it's like going into a candy store.

@Amarand 3 года назад

I love this video! What I'd love to see in the next video, is a close-up demo of how to operate the lenses. I know it should be super easy...and I own countless cameras...but I couldn't get the wide angle lens to focus. The telephoto worked great. I think I'm not properly working the physical controls. I notice that it came with a screwdriver, and both lenses have a focus and aperture...dial? I just don't know which should be moving and how. On the telephoto, I was able to get things to focus up properly, but I'm sure figuring out the wide-angle will help me with improving telephoto shooting.

@Amarand 3 года назад

Also, are you in Columbus? Your Micro Center video looks a lot like my store! 😹

@LossyLossnitzer 4 года назад

I wanted to see some Astro photography - Thank you for Sharing

@hxhdfjifzirstc894 4 года назад

I'm wondering if this Pi cam sensor can be mounted at the prime focus location of a Newtonian telescope.

@jonnoMoto 4 года назад

Lets hope the full capability of the sensor will be made supported over time. e.g. 4k@60 and RAW

@anandmoon5701 4 года назад

Is the camera compatible with Jetson Nano B01.

@AClarke2007 4 года назад

Only around £50 for the Sensor and £25 for each Lens. Takes standard C and CS type mounts. Infra Red Filter fitted but can be removed (voiding warranty). 1920 x 1080 Resolution (may have a problem using it to record 4K at the moment though). Works with all Raspberry Pi versions.

@frederikholfeld868 4 года назад

putting the pi and the camera into one battery powered box with a display and dedicated buttons would be amazing, i hope someone is gonna make that.

@Hougaard 4 года назад

What's the closest distance for focus? (Talking macro distance)...

@TheBowersj 4 года назад

is it possible to wire a button that takes a picture when pressed? Maybe a 3d housing can be printed to fit everything together.

@zevindd 4 года назад

FYI, looks like it's just a C or CS mount their using, which means there are dozens if not hundreds of lenses you can use.

@RonLaws 4 года назад

www.raspberrypi.org/products/raspberry-pi-high-quality-camera/ C-CS Mount adapter available it says so yep.

@im_Polyhedrons 4 года назад

I'm hoping someone develops dedicated camera software specifically for pi.

@KennethNicholasK9 4 года назад

Good idea

@treypop123 4 года назад

I tried making a pi zero camera in an old plastic film camera case I wanted to use real lenses but could never figure out getting actual lenses working on it. This will be perfect!!!

@TylerHarney 4 года назад

My thought has been answered! I've been wanting a small setup for shipping out packages for my etsy shop. This would work great

@xavierdavier9104 3 года назад

Micro Center is probably my favorite store!

@BrianThomas 4 года назад

I have a store right down the street from my house. I'm going to check it out today. Thanks ETA!

@ab_ab_c 3 года назад

What is the highest video frame rate these cameras support? How well do they work in low light (nightime) conditions?

@turtlelore2 4 года назад

I'm curious for what application these things would be used for. Other than for the obvious "because its a hobby".

@xandersnyder7214 4 года назад

Security camera, astrophotography, and all sorts of things you'd use a camera for.

@awanluna 4 года назад

you can attach this to microscope & telescope

@CarsonsVids 4 года назад

I really hope someone creates an all in one camera solution for this. Like a case, touch screen, and shutter button. Maybe some programmable buttons too

@fishjuice3987 4 года назад

you do it!

@JacobHillSBD 4 года назад

Theoretically, you could build a pretty small Point and Shoot camera (if you used a Zero, probably about the size of a Go Pro) for dedicated photo/video.

@curtishorn1267 4 года назад

What is the maximum exposure time and gain setting? It would be nice if they released another camera with the IR lens removed, like they did for the older modules. Knowing these things would help determine if this camera could be used for EAA/live observing with a telescope+camera.

@RedFoxSquirrel 4 года назад

Microcenter is great. The only problem I have with them is that there is not one in Florida! (Preferably Tampa).

@hivetyrant7 4 года назад

I'm oversimplifying but the wide angle is mainly important here because of the crop factor with this system, don't just think of it like a typical "artsy" wide angle lens.

@EdisonMusta0 4 года назад

Can you check it with android installed on raspberry pi and use the Google pixel camera Apk

@nijoeli 4 года назад

Wouldn't work bcz it requires Snapdragon chip

@EdisonMusta0 4 года назад

@@nijoeli i think it can work because it works on Exynos too and if it doesn't work it can try filmic pro Apk

@Apophis-en9pi 3 года назад

It should be noted that PiCameraApp is not compatible with the 64 bit Raspberry Pi OS. Great video!

@Ad3tr 4 года назад

You should try and make a compact build of this that you could use like a point and shoot.

@SethPinnock 4 года назад

Yes. Please do a video of MicroCenter

@georgelmfao 3 года назад

Very informative. I think I would like to see if I can hack one of these onto a lomography camera like the Diana f+.

@bottledwaterprod 4 года назад

Can't wait to see people get creative with custom camera housings. I imagine you could get this thing very small and streamlined, especially using the pi zero.

@lanchesternaanyane 3 года назад

Theoretically, can you build a professional grade portable camera if you do the tuning and all the yourself. Want to see someone do that.

@skuula 2 года назад

Thank you. What is the length of the sensor board + 6mm lens assembly?

@TheOleHermit 4 года назад

Okay, the HQ camera is great, so I've purchased 3. One is for a motion tracking telescopic security cam and 2 are for robotic stereoscopic depth perception on a StereoPi CM3 board. They're all hooked up and ready to start streaming... as soon as I can figure out how. There's much more to this than taking a snapshot or live preview, but obsolete support documentation and 2018 tutorials are mostly all that's available.😣 I've watched so many OpenCV installs over the past week that my head is spinning.😵 But, haven't found any that cover gstreamer nor remote opencv processing of a streamed video source, especially w/dual cameras. Can't get gst-launch to work in python because I don't know whether to use uv4l, uv4l-raspicam, the picamera module, pre-loading the driver, -cs 3d sbs, or /dev/videox. The IMX219 RPi V2 cameras work fine with python and nvarguscamerasrc on the NVidia Xavier NX, but not the HQ w/o removing a resistor. Besides, I would much rather keep the $400 NX on my desk to remotely process images from the StereoPi robot 'head' and return motion commands over WiFi. @ETA Prime, please follow up with detailed tutorials on this stuff, so that end users can get the most out of the HQ camera.🙏

@SachinGopalkrishnan 3 года назад

I came to check on the video quality. Thanks though. Informative.

@Gulroeg 4 года назад

That is great! Can you make a test with this as a webcam? This could be much more high quality than the standard web cams from logitech and also a cheaper solution than getting a Sony a Canon with expensive lenses. Much appreciated and looking forward to the other videos in this series.

@dannycoy5775 4 года назад

This is awesome...I would like to see the setup you have for the monitor, mouse, and keyboard. How portable can you make this? Very Interested. I there like a pi camera case with a touch screen or small screen you can use and maybe a bluetooth keyboard/trackpad with it. SO MANY IDEAS!!!!!!!! PI=INFINITE

@slothsarecool 3 года назад

Are there any higher quality / resolution sensors and lenses out there for Raspberry? Something closer to what you'd find from full-frame or maybe even MFT sensors

@jbmorris2893 4 года назад

I would go, but the nearest Micro Center for me is more than 2 hours away. I don’t usually have the chances for that travel. :(

@Lp-ze1tg 4 года назад

Thank you for posting this video and I have been looking for reason to upgrade from pi 3b+ to pi 4. I am into video recording as a hobby and I was considering getting a more expensive camera. If this HE camera turn out to be a solid performer for 4k 10bit recording then I am getting both the pi 4 and the HQ camera module. Subscribing to your channel.

@LewisUpperton 4 года назад

While the sensor seems to be capable of doing 4K at 10bit (it can do a full sensor readout at 40 fps at 12bits), the Raspberry Pi will be the limiting factor. It's either the CSI interface that's used that doesn't support 4K anything or that the built in h264 encoder doesn't support 4K.

@Lp-ze1tg 4 года назад

@@LewisUpperton Oh that would be my first disappointment.

@lc7ineo 4 года назад

Hope microcenter also has home delivery... Best of luck to you all!

@ITpanda 4 года назад

Looks like it is time to build those open eye OS cameras I have been putting off on starting.

@VasmodeusV 4 года назад

Nice video ETA prime. I was guessing about using it as a webcam. Do you think it worth it? Thanks in advance.

@chizukichan 4 года назад

I hope IMX477 will get support in ESP32 soon. I've been wanting to build my own DIY 360 degree camera for cheap and I want to dewarp the images and videos on my phone (OnePlus 7T) while caching to an SD card connected to the ESP32 (to hopefully get higher framerates by eliminating streaming overhead). I was thinking I'd use 3 wide angle cameras.

@FuZZbaLLbee 4 года назад

I could see someone making a 360 camera with an extreem wide lens with this. Or a RU-vid live streaming solution

@bobjordan8717 4 года назад

For the price, just have a circle of them as is done with the professional 3D cameras. 6 to 8 of these mounted portrait in a circle will produce a very high resolution 360 degree image.

@GordieGii 4 года назад

At around 2:45 you mention that the "back focus" would need to be adjusted when you put a new lens on it but I missed the part where you describe how to do this. Is there a "correct" method? Does it need to be done for each new lens, or just the first time you put a lens on and lock it and it will work for all lenses thereafter?

@vvwording4844 4 года назад

The bigger lens costs $50. That lens requires the HQ camera board which costs $50. As I understand the system, the "back focus" is on the HQ camera board and when a new lens is used, the "back focus" is a focus opportunity (or a burden - depends on your outlook).

@GordieGii 4 года назад

@@vvwording4844 A simple "I don't know" would have sufficed.

@IRWPD 4 года назад

The camera is very awesome. Thinking there are a lot of projects that can be done with it. Like a wildlife or many be a security camera.

@Masoudy91 4 года назад

Are the cameras high quality built? As its aluminium or plastic? Just wandering 😅

@eeyoreofborg 4 года назад

What?! Micro center is still alive?!

@eseseis7251 4 года назад

in Theory this should capture high frame video(slow mo) , does it work?

@MaxDad7 4 года назад

I would like to see a kit to make this a fully enclose camera with a built-in display running a custom OS. I wonder if this could be connected to a desktop to be used as a webcam/camcorder?

@RedMageGaming 4 года назад

Oh this is sweet. I have a couple of the other camera boards that came in aiy vision kits, but this is one I would actually want to build around. Way to seriously up the PiCam game.

@friendlynomad9840 4 года назад

Very cool. Can't wait for the sequel

@davidleigh6196 4 года назад

If you were to use this as a web camera how would you keep the audio and video in sync? They’re from two different sources.

@travisiswin 4 года назад

"The New Raspberry Pi HQ Camera Is Awesome!" Me: I'm sorry, the HWAT?

@linuxstreamer8910 4 года назад

me too i needed to do a double take to

@xandersnyder7214 4 года назад

Yeah they had to retire the Pi Cam2 because the sensor that the older camera was using stopped being manufactured about 4 years ago.

@jyvben1520 4 года назад

blue side of connector cable faces the usb ports on rpi ! blue side at camera is at the back !

@BlownMacTruck 4 года назад

I’m not sure how Microcenter has survived all these years but thank god they have. Their prices are competitive (and they price match), their selection is insane (they actually have enthusiast products that you’d normally never see anywhere outside online stores) and there’s one five minutes from me, making it an awesome solution for when you forgot to order something and need a part immediately b

@philips170t 4 года назад

Two of these at a fixed angle with a projector in between. We have a 3D scanner like the breuckmann.

@RogueRen 4 года назад

I'm just thinking of how to get this working like a USB webcam... This would be awesome to use as a HQ face cam for streaming if you could make it work that way

@alexk1480 4 года назад

does this work with the pi zero? if yes it would be a cool little project to build the sensor, pi zero, a small touchscreen and a battery inside a 3d-printed case to make a diy camera. maybe even set up raspbian to hide the taskbar and autostart the camera app with a script maybe