The POWER of PRE WASH when cleaning your vehicle 

Haha! Love it 🤣👏🏼

​@@OnTrackDetailingWhat is the ratio on your pre wash you use mate

1:4 here.@@robjones1905

Exactly

Thank you for your comment, I will do this next time 😊

​@@OnTrackDetailingstill waiting

@DexterXxX Waiting for winter again my guy. 😂

@@OnTrackDetailingabsolutely useless video power of pre wash? you didn’t even rinse the other side with plain water 🤣🤣

But pressure wash alone doesn't do this Try it yourself :D

​@@OnTrackDetailingwhat pressure a pressure wash is a good one?

@PATRYK-R1 its more the nozzle than the pressure washer Anything over 5LPM is ok :) find a good trigger :D

@@OnTrackDetailing thank You

Absolute best one for car detailing is the P200 nilfisk. What a machine

Wtf!!!! It proves the pre rinse helps But give us a sub and I'll do another video soon! Waiting for my car to get super dirty in winter again 😎

you need half with pre clean then pressure wash and the other half with just pressure wash

Do you not believe me ? 😲😥

@@OnTrackDetailing post a proper video so we can see for ourselves.

I like your logic. But it has screen wash in it and usually is wet with water when driving in rain 😂👍🏽

@@OnTrackDetailing suppose the screen wash is a factor of it but even still the wiper doesn’t put much pressure on the glass so for it to be that effective is great engineering

The power is shown on the side that's cleaned 🗿👍🏽 The other side was the same basically after rinse, but i am getting my car dirty to do the video again

I haven't tried that. If I can buy it, I'll try. ☺️

@@OnTrackDetailing It's actually a huge timesaver, especially on cars that have heavy tar. It's hugely popular here in Ireland but comes from Sweden. It's highly in Eastern Europe as well.

Yes,fantastic product,OCD detailing in Ireland has a vid on it

Heehee.

I appreciate your opinion. I think it is quality product, and find it works well :) we all have preferences and products we like and dislike ☺️ Between this and a snow foam such as Bilt Hamber, there's very little dirt remaining.

Yes that is true. Standard disclaimer about not in direct sunlight / cool panel / use filtered water if possible 😎👍🏽 Good to remind everyone.

It's not that strong I found 😅 but then again I work with chemicals all day. You can always dilute down more if you wanted, but it's never damaged anything. Good cost effective product 💚

Like I'm a chicken thrown into a lion enclosure!

Thats why it is called a PRE wash… not a touch less wash

@@felipelebron7660 oh I get it now, that's good way of removing maximum dust before contact wash

@@felipelebron7660 exactly ! It gets a lot of dirt off for sure.

Exactly!!! :D

To show the POWER of PRE WASH :-)

Water won't clean anywhere near the same. Try it yourself on a really dirty car :)

It's not a soap, it's a Citrus based all purpose cleaner :-) hehe.

It's a Kranzle K7 TS with Kranzles stubby QC lance. You can get similar lances for all jet washes. 👍🏼👍🏼

100%. Pd150 pulls like a train.

Yes, you will have no problems. Totally safe product when used as instructed. It may strip your wax or sealant sooner, it is OK on ceramic coated vehicles .

Not quite. TFR is heavily caustic. You can get PH neutral or mild alkaline Pre rinses which don't cause the kind of staining you get with TFR on silver/chrome trims, black plastics and such.

@@OnTrackDetailing an alkaline so a tfr

@c11yan Again, a rather simplistic view. There are multiple other chemicals and components to a product. All I can tell you is Pre rinses such as this, and snowfoams like BH Autofoam/Touchless etc are nothing like TFR and they are much safer to use on your paint :)

@@OnTrackDetailing BH Touchless is aggressive stuff and can streak like a tfr - it’s very very good though

@c11yan Maybe it streaks at the wrong dilution or used in the wrong condition. I've never had it streak personally, but that's just my particular experience, and it does not invalidate yours :)

1:4 as prescribed

No, these kinds of cleaners are fine for ceramic coating (When I say ceramic, I am referring to a "proper" ceramic and not a "ceramic wax" or similar product - Coatings actually like a ph10-11 clean now and again!) Beside it is better in my opinion to reduce any coating or wax than not pre wash and risk extra swirls during wash

Hello, yes it is, for ceramic coating. It may affect traditional wax or sealant more.

Just pour 😂 Yes I keep product in there all the time 😊

@@OnTrackDetailing how much soap and how much water dilution for pre wash? It never gets clogged ?

@@jjjjjjjjjjjhjjjjjhjj 1:4 as per instruction. Never clogged. It is just liquid :)

Sealant and wax etc is for protection. At the end of the wash after any polishing etc. You can just pre wash and snow foam which is for cleaning. 😀

@@OnTrackDetailing thank you!

Oopsie 😂😭

By using a pre wash you loosen the caked on dirt. This allows it to be removed contactlessly. By doing this it means that your next pre wash steps (such as snowfoam) are more effective The ultimate goal is to remove as much dirt as possible without touching the paint. The reason for this, is to prevent scratches and swirl marks when washing. 😀 @captaingold1685

Dilated people worst comes to worst.

Noooooo. Chemical :D

1:4 as per instruction :)

Hello 1:4 .

Thanks mate 👍

We don't sell products, so best to contact Valet Pro if you have specific questions 🙏🏽

I'm sorry. When I made the video a year ago, I thought I can't wait for you to watch it , hehe 🙈😆👍🏽 Thank you for watching though! ❤️❤️

The chemical is held up at the beginning of the video 👍👍

@Hey-og-weestalkerlink for the product ?

That is a good point! 😬 Although it proves the pre wash is effective. You'll just have to trust me. Given I do not sell products, and This was not a sponsored video, and I received £0 from anyone (Valet Pro, RU-vid or a customer, since it was my own car ha ha!) - I have no reason to lie :-)

Doing a contact wash with this level of dirt would be disastrous! :( That's why we pre wash.

Its held up at the start of the video 😊

There was no way I could read it, it was only onscreen for about 1/1000th of second, seriously? Lots of channels do the same thing, it is maddening. I just look for another video or look in the comments and see if I can find the product name. I do not have bionic vision so I could not read the product name in this video

The pre wash is pictured in the video.. :)

No, it's safe to use regularly and doesn't damage clearcoats :)

pH level of that product is 9.5, hardly 'highly alkaline'

Just search online for the product :) Local to where you are in the world.

It makes no difference 😊

No paint damage :) It's non caustic , no damage to paint. It's also my car :) Thanks for your comment 🙏

A pressure washer will blast away majority of the dirt on its own, the pre wash solution helps clean loosen the remaining bit of dirt right before a contact wash…

Why not

Why? :(

It really isnt 😂 that's 2000 miles of driving in a British winter sir. My commute was 120 miles a day at the time, you probably cannot see the winter tyres fitted. Hatch back vehicles due to low pressure at the rear always suck dirt in. Would you like to send me your Email address and I'll send you the pictures of the car showing the condition at the time? From January of 2023. You'll see the whole car is indeed very dirty... Not sure what I would have to gain by "false advertisement" given that we are only a detailing and PPF business, and don't sell products. Look forward to your reply ❤️

Someone doesn’t know about the way cars get dirty 😂😂

Hello We don't sell products so best ask Valetpro :)