The Secret to Running Shallow

Подписаться 547

Просмотров 93 тыс.

50% 1

Follow me on Instagram @kevin11mic
Like! Comment! Subscribe!
In this video I reveal the things I've learned over the years of running shallow water and answer some of my most asked questions after posing my "viral" video several years ago "Who Needs a Mud Buddy". Among many here are three things that help when setting a boat to run shallow.
The three things you need to run shallow are
1. Motor elevation
2. Horsepower!
3. Cupped propeller
Please support the channel to get more content like this! Lots of cool videos coming with the new boat. Also check out some of my there videos on my two trucks.

Авто/Мото

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@marcushuang1804 2 года назад

Would Trim tabs help out on this particular setup?

@411sponge72 5 лет назад

Thank you for posting this. Very informative. I am thinking about getting a boat specifically for bass river fishing. The depths of the river vary from as deep as 10 feet to less than a foot. I was dead set on buying a mud motor but after seeing your video, I am considering getting a standard outboard for my boat. What do you think?

@Southtexasduckhunter 5 лет назад

Bill York mud motors have their place. If you think you will be in a lot of vegetation then a mud motor may be the better choice. If it’s just wanting to run shallow in relatively clean water then an outboard with a tunnel will run just as shallow and be more user friendly. Just have to ask yourself what you want to use the boat for. There is very little that a tunnel outboard won’t do compared to a mud motor. The obvious advantage of the mid motors is they are air cooled. Outboards are water cooled.

@411sponge72 5 лет назад

@@Southtexasduckhunter Thanks Kevin for the response! I've just heard that with mud motors, there is a lot more maintenance involved as well as having much lower horsepower compared to a traditional outboard. I'm not sure how true that is but I'm still considering my options. How wide is your boat? Reason I ask is because I want to be able to stand in the front and pitch and flip for bass and I would like a stable platform.

@terryogletree2128 4 года назад

Call Gator Trax , they are the best

@sharonbraselton4302 10 месяцев назад

jet óutbard jet bóat

@jigacidal1188 6 лет назад

I have the same rig but with a 60hp yamaha. What pitch is that prop? Also what are your thoughts on extending the tunnel for better water pressure on the prop? Possibly helping get the motor even higher. The previous owner knocked the bottom 3 inch off my skeeg so it runs pretty swallow as is mounted on the transom with a 3 blade. Stumps and hydilla are my issue not so much mud. Thanks.

@Southtexasduckhunter 6 лет назад

I’m running a 17p 4blade CFF4 with added cup. I wouldn’t extend the tunnel. It would actually limit your height. When water exits the tunnel it rises. By extending the tunnel you would prevent the water from rising limiting how high you can raise your motor. My cav plate is about 6” above the top of the tunnel. I can run it there because of how the water rises off the tunnel. I have ran in lillypads and it seemed to do well. Just have to really keep an eye on the tale tail

@jigacidal1188 6 лет назад

Thanks for the heads up. Not sure where you hunt but, looked like SE Texas marsh. I run tugz on the intracoastal between Port Arthur and High Island Blue wing showing up pretty decent for mid August. Hope ya'll have a good season.

@jordancanales4 6 лет назад

Good video. I've got a 2005 yamaha 60 2 stroke and when that thing even gets near mud I'm getting the over heat alarm. Have you had any similar problems and found a solution ?

@Southtexasduckhunter 6 лет назад

Yea mine will overheat when idling in muddy conditions but it cools off quick. I run without a thermostat in mine simply for the fact that I’m almost always in shallow water. Make sure the water pump is good and thermostat is not clogged or just remove it. I’ve been running outboards without thermostats for years without problems.

@johngivens4644 6 лет назад

I take the thermostat out and then break off at the spring and put back the plate where you won't get hot spots in the block and it's always work really good for me on my jet drive.

@davidh6396 4 года назад

How does a setup like this run in medium thickness vegetation? I have a river I run that has areas with thicker vegetation. With a regular outboard setup you constantly have to clean the outboard of weeds. I'm ok with occasionally removing some weeds and push poling through the thicker stuff but was wondering what to do when upgrading motors. Currently have a 1560 tunnel w/ 15 hp which is way underpowered. What's your opinion on outboard vs mud motor if you run a decent amount through semi-thick vegetation?

@Southtexasduckhunter 4 года назад

David H I’ve been able to run medium hydrilla without having to stop. With the skeg even with the bottom of the boat the plants get stirred up enough from the tunnel that the prop just chops it up and sends it into the air lol. I have been stuck under a bridge where it was packed in tight but was able to force my way out after cleaning the prop off several times.

@sharonbraselton4302 10 месяцев назад

buy miñi tug boat 21 mph 15 hp 1⁸ jnch diwñ miter show water 9 iñches on lane

@alexordonez5399 4 года назад

Hi kevin, this is Alex in San Diego and I have the same alumacraft 16 vmod design as well. I want to install a hydraulic jack plate and wondering which size and manufacture you would recommend? Much thanks!

@Southtexasduckhunter 4 года назад

Alex Ordonez mine is a CMC 6” for up to 300hp engines.

@sharonbraselton4302 10 месяцев назад

buy het outbard

@babayaga3866 4 года назад

I won't be running a hydraulic jackplate for now. Where is the best place to have the cavitation plate setting in relation to the tunnel?

@Southtexasduckhunter 4 года назад

Baba Yaga as high as you can get it and still get the boat on plane and not over heat. I would start as high as possible and move down from there as needed

@babayaga3866 4 года назад

@@Southtexasduckhunter Roger that. I appreciate your feedback.

@rosshowell1253 2 года назад

Your not worried about dirt build up in water jackets?

@robininabinet6621 4 года назад

You don’t run a water pressure gauge to make the water making it to the top cylinder?

@Southtexasduckhunter 4 года назад

Robin Inabinet not sure I understand this? However these engines are setup with the thermostat on the top of the power head. Due to this the engine has to fill up with water before it exits through the exhaust housing. Kind of like water flowing over a dam. Where the dam is the thermostat opening. I don’t run a thermostat in the engine either. As long as the engine temp sensor doesn’t go off it’s good.

@robininabinet6621 4 года назад

We just always added a water pressure gauge to be sure there was enough pressure to get enough to the thermostat. You could be getting water thru water shield but just not enough. A pressure gauge will let you know if there’s enough going thru the system. Just an easy way to double check.

@crexhuntclub 3 года назад

You say a tunnel isn't necessary. Would you say it's worth adding a tunnel in if you can? Can you get similar performance with a jack plates, cav plate, and the right prop?

@Southtexasduckhunter 3 года назад

Depends on what you want. Tunnels will run shallower in hard bottom and tend to get up in shallower water. They are typically slower. I like having the tunnel because it allows me to run the skeg even with the bottom of the boat and you chances of damaging the lower unit are very low if you tend to run places with stumps or in my case oysters. You can always do a vented tunnel which will allow you to open a valve in deeper water and break the vacuum on the tunnel which will give you 10-15% more mph. You need a hydraulic jack plate to take full advantage of a vented tunnel setup.

@crexhuntclub 3 года назад

@@Southtexasduckhunter Nice. The boat I have currently is a tunnel and it's money for shallow water, but I've considered upgrading to a bigger more all-purpose boat like a carolina skiff. Most boat's aren't tunnels so you would have to add your own which I'm not too fond of doing. Was just wondering how much height I could get before I would deal with blowout or overheating. Did you have trouble with your other boat before you added the tunnel. I would probably set it up with two jack plates a shawwing and pt prop.

@eastcoastfishing6852 5 лет назад

what depths can u take that into an what are u drafting in that boat

@Southtexasduckhunter 5 лет назад

Tyler Duke will run in 1-2” when on plane. Drafts probably 8-9” sitting still

@eastcoastfishing6852 5 лет назад

thanks buddy

@coreyrougelot7023 6 лет назад

I'm designing a boat with a built in gas tank. Do you recommend placing the tank in the front or the rear of the boat for running shallow? Also want to keep in mind getting on plane. Thanks

@Southtexasduckhunter 6 лет назад

Corey Rougelot I would say best case is in the middle or slightly forward of middle. If you have to choose between front or back I say front. You don’t want to overload the front but you also don’t want to overload the rear.

@H-FishN 3 года назад

What jack plate do you use?

@Southtexasduckhunter 3 года назад

Mine is a cmc but there are better faster/lighter ones out there

@dewaynewebb3467 Год назад

Does float pods help with shallow running?

@Southtexasduckhunter Год назад

If your already on plane no. But they help draft shallower so you can jump up in shallower water in theory.

@tracybrown1579 6 лет назад

Dude set the camera down and talk or sit still made me dizzy watching the video. I like what you did and respect you and all. You gotta edit these videos or at least watch them with some sort of critical eye prior to pop them out there. Really wanted to learn as much as I could. Looks like you have it all sorted out too. I like the info and you taking the time to put it out here for others. So I truly mean no disrespect and say that about the moving with as much respect as I can.

@Southtexasduckhunter 6 лет назад

Tracy Brown I appreciate the advice. I noticed the shaky footage when I was editing. I think it was my settings on my GoPro. When I ran the stabilize function on iMovie it didn’t seem to help so I just went with it. Listen to it like a podcast lol!

@johnnydriedger1131 5 лет назад

How long is your tunnel

@Southtexasduckhunter 5 лет назад

johnny driedger about 6’

@thegreenberetlife0191 3 года назад

Are you able to run this in shallow rocky areas?

@Southtexasduckhunter 3 года назад

Panurgic 01 never tried. My guess is it would do ok running across flat rock areas 2-3” water. But not like rivers where you see the jet boats running through the rapids.

@jsjrspivey 6 лет назад

How fast does that run with a tunnel don’t they run slower with a tunnel!

@Southtexasduckhunter 6 лет назад

Jhnfrmr I can get about 34mph trimmed out just right. In general tunnels are slower because of the drag the vacuum from the tunnel creates. Not always the case but a good rule of thumb.