The Secret to tuning stabilizers like a PRO! 

this is by far the best wire balancing video i have watched

Sounding tight after the tune. A great and simple tutorial to teach enthusiast like myself and others on how to tune my stabs!

This is an AWESOME video! I learned so much from this - the two-tweezer trick, and the existence of the stabilizer tools will make my life so much better! Thanks for doing this!

DUDE. This needs more views... It's OBVIOUS this would make a huge difference, but I've NEVER checked the bend of my spacebar wire. I'm taking apart 3 keyboards tomorrow to check the wires. 10/10 Keep making content like this.

it was helpfull, thanks man

Totally just changed how I balance my wires. I always felt like I was on the right track but this helped it really click.

I don't use anything other than XHT BDZ for the ends of the wire that rest in the stem. I found that absolutely all other lube will, in the end, droop down / fall and land on the pcb or foam as other lubrications people recommend aren't as thick / don't stay in place well especially with long use which makes you constantly have to go back and re-lube or keep up with fixing the stabs. Only for the added lubrication to do what the first coat did. This is a good straight forward video though to understand the basics, I prefer to use 205 in the housing, I do not use a syringe or use as much as you did where the wire clips in, just a decent amount brushed around the wire thinly is more than enough and doesn't make things messy / over complicated.

👀👍! voice over is a nice change!

time to balance them wires

thank you so much, finally got rid of my ticking spacebar that was driving me crazy

Best stab tuning video on RU-vid..

You've shown only how you tune the spacebar wires, do you do something with 2u wires? i've felt like it's impossible to balance them perfectly, i've tried both sides but it felt that always when i balanced perfectly the ends of stabilizer, the corner ticking would emerge. What can i do about that? Also thanks a lot for this video, it really helps to tune even the worst stabs that i've seen.

I don't have an issue with lubing them but more so maintaining them, I find that I always have to relube my stabs every month or so because they start to rattle which I don't really like

I personally prefer a thin coat of xht-bdz on the wire but i guess its just preference.

Hi hi, can I just use any aluminum u-channels? Are there anything that I need to lookout when getting one? I have a few options: aluminum plate (3mm thickness, 10cm x 30cm), AHH205 Aluminum flat plate (5mm, 2cm x 30cm), ACH1 Aluminum channel (2mm, 1.5cm tall, 3cm x 30cm), Aluminum miter track (3cm x 30cm) and I don't know how to check if these are... actually flat. Thanks!

Can you please make a video chapter for the last 12 seconds so I can loop the sound for asmr purposes?

Can I use 205g0 for the wire or should I use thicker lube like xht-dbz

Hey there! Would the syringe method work with XHT-BDZ? I'm buying both 205g0 and BDZ for future projects as I'm just getting into this hobby, but I got a prebuild custom keyboard from KBDFans (Odin 75) that has a bit of a ratlly spacebar. I was planning on applying it to that part of the stabilizer with a brush to not overdo it, but I'm wondering if 205g0 would be better as the Cherry stabs they used came clipped and lubed by them already. Definitely keeping this vid for my next build when I'm fine tuning my wires though, thank you for your help!

cherry screw in stabs with holee mod sound better imo

i wasn't expecting voice haha. very bassy

bruh which side do I bend if both sides tick after the bend has been straightened

Are TXs your favorite stabs?

got a shopee link to that syringe head?

What keycaps are those !

Very thin layer of Finish Line Trilinium “Premium Grease” on just the wire for TX and Staebies stabilizers. Krytox 205 on the stems and inside of housings, about as thick as you would apply to switches. The Finish Line is less than $10 for at least 8oz tub, maybe 16oz vs HXT-BDZ $5 per gram.

Or use two ballpens without its ink cartridge

You completely skipped telling us where to pump the lube and how much.

xD

This has been my method of stabs for a while but it is wasteful

bro tx dont need no tuning, next time if you gonna make a tutorial, use cheaper stabs