The Ultimate Air Tool Storage Rack | How To

Подписаться 107

Просмотров 11 тыс.

50% 1

I've never really had a good spot to store my pneumatic tools, so i came up with this design using red and white oak. Wasn't really sure if it was going to work but it ended up going really well.
Watch in HD! And please like and subscribe to the channel 🙏

Опубликовано:

13 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@wesir427 Год назад

Well this potentially saved me some $$$, there are couplers that you can screw into wood but they're like $10 each, with this method I can get the normal ones for around $4-5 and I can always add epoxy if I'm worried it's not strong enough or make it go all the way through and bolt it from the top

@boltyfpv8592 2 года назад

i love that planer slider thing great vid

@oakalloy4187 2 года назад

Thank you!

@philballard6449 2 года назад

@Oak & Alloy What size drill bit did you use and did you have difficulty screwing the coupler into the board, due to it not being a wood screw? Any tips on how to do it easily?

@markarmstrong3394 3 года назад

Great video

@oakalloy4187 3 года назад

Thank you so much man

@43srgrock 3 года назад

I did this for my air nailers but put them to close together.

@vanessalee5893 4 года назад

Do you glue or epoxy the connectors into the holes?

@oakalloy4187 4 года назад

They have threads on one end so I actually could thread them straight into the wood without any glue or epoxy 👍

@philballard6449 2 года назад

What size drill bit did you use?

@thriftyhomediy 2 года назад

@@philballard6449 I used a 12mm spade drill bit, didn't have a 12mm drill bit, it was hard to get it to screw in at first, so give it a little wiggle with the spade bit, it screw in nicely.

@philballard6449 2 года назад

@@thriftyhomediy Thank you for your reply. I ended up using a 7/16 drill bit and also tried a 7/16 tap and both worked okay but not great. It took a while but I got most of them fairly straight. Screwing a standard thread bolt into wood is a bit of a challenge but well worth the effort. The project really turned out nicely.

@thriftyhomediy 2 года назад

Glad you found a way.