The ULTIMATE pocket door...Frame & Hardware all in ONE BOX! 

Matt, I always felt like these are sales videos but this felt more informative. I like it. 👍

I’m a GC, the cavity Slider is a top-notch system, if the the budget allows I will use them but the product can get expensive with frame kit, sliders, and softclose. My standard go-to is the Johnson 2060 system which is probably 40% of the cost and is a commercial-grade system.

OMFG! That is BADASS! Your opening comment was entirely correct. Pocket doors are not for the faint of heart. While this system looks like its not for the faint of wallet, it looks like the best system Iv'e seen so far. Wow! Now I just need a deep pocket client for my next remodel. Thanks Matt.

Pocket doors have always had amazing potential that has never been realized until recently. Happy to see it!

Literally just bought one to replace a really tight space for a half bath. Just picked it up a day ago - and looking exactly like the installation videos. Really excited to see the soft stop in action. Thanks for the info - much appreciated to get a top notch product!

Damn, I jealous. Looks great. The ability to service can be huge. In my house I have multiple PDs. Had one on the main floor powder room, worked for years. Then it jambed and wouldn't open completely. I ran a scope back there to see what the issue was and went "oh sh.." Needed to pull down a bunch of trim and completely remove the door so that I could pull out and remove a pile of scrap that had been left behind during construction. ( I wish this was the only garbage the builder had left behind. ) Turned out that the crew doing that part of the build left some galv scrap and chunks of sheetrock on the door framing. It sat there for years, until it didn't and fell down into the pocket path and blocked it. Being able to easily pull down a little trim and access the hardware and door is huge compared to needing to rip/remove trim to access, then remove the door and when you're done reinstalling the trim, etc. Of course anyone putting this equipment in probably wouldn't leave a pile of trash inside a wall to fall into the door path. Quality building needs quality crews. I'm got a master bath remodel in the plans and will look at these components. Thanks,

THANKS MATT,LAURIE 🤗FOR SHARING THIS, I LOVE POCKET DOORS ,… solves many problems,for moving furniture, I now live in a house built in 1917 , with pocket doors that store😁🤗💚💚💚

I've used the johnson System, and that works similar. I did 2 of them and I am not a pocket door expert. They also have the system for insetting 3/4 ply for the whole cavity, which really helps with noise.

I have 5 Cavity Slider pocket door frames and love them. The only screw up I made was not installing the plastic spacers between the pocket door jambs before drywall was installed which caused some warping for the doors to slide into the frame. Not enough to cause the doors to scrape against the jambs but the alignment could have been better if I had popped those spacer in, which in the heat of construction, I forgot but should have done so after I set the frames. I wanted to have both soft close and soft open but for the soft open, the mechanism needs to be installed prior to drywall, which meant the doors needed to be installed before drywall. That could have caused damage to the doors by installing them so early in our new home construction with everything else that was going on with contractors. I also didn't have the doors on hand yet. I did the soft close option instead and they work great. We have 8' tall solid core doors, most 36' wide. When I first was contemplating what pocket door frames to use, I got a quote from a Marvin Window subsidiary company of $1500 each for wood pocket door frames. Yikes, no thanks! Very happy with Cavity Sliders.

I’ve never thought of these as paid promotional sales videos - info that is provided is up to the viewer to filter as they deem appropriate - that said, the pocket door was something that the house I grew up in had 3 of them… always liked them and in the 13 homes that I’ve built over the last 31 yrs, I’ve always incorporated them into the architectural designs… it also served as a litmus test as to skills, knowledge and expertise of any general contractor-builders interviewed during the contract process - so many “good ole boys” self-eliminated from consideration when they were challenged by the design specs… the fact of the matter is the upscale and more costly builders not only understood the nuances of the build, but also offered valuable insights into the complexities and ways to enhance the designs… these are the gold-standard builders that deliver value across the build cycle

I've spent a lot of time trying to convince people to not install pocket doors or to expect service work on them well that just changed. Even getting replacement roller parts was impossible always trying to make or change the the whole system usually they got rid of them awesome product

Pocket doors are so posh I love them!

Wow! Finally a pocket door that works. 👏👏👏

Thanks for this content! I have a broken slider due to a roof leak. I will be using this company.

I’ve installed 5 of these, love ‘em

Cavity Sliders… absolute banger of a name😂

Looks like a good product. I have seen most all brands including the 1884 double walled and double doors pocket system. Santa Cruz historically preserved home. That was more like carriage doors. Really like that design of this system.

We dug a pair of doors out of the walls of an 1880s mansion ... some careful cleaning and the magnificent quarter-sawn oak doors were opening and closing like new. I don't know how the innards worked, but they opened just like this.

I am in NZ and we always have used cavity sliders products. Not exactly this one with the removable jambs but very similar.

Excellent. Makes me think about using a pocket door on a remodel I have coming up.

Now that's a huge set of doors

I had a basic house built 30 years ago. The pocket door system came prefab and ready to install as part of the wall. No soft-close.

They have one more step to go. In my region you get pocket doors pre-assembled and adjusted. Takes five minutes to level and install.

We were thinking this for a ensuite masterb bedroom remodel. But decided on 2 sliding barn doors that meet in the middle due to the space to the bathroom, and we like the look of sliding barn doors, no matter what "experts" say. Had wiring to worry about, and used the dead space on the wall in the bathroom side for extra storage. But I will admit these do look slick

Alright! Noted for my next build.

Wish I could get these in Canada! I have an upcoming project and would love a solid pocket door system!

As a homeowner who is prepping to do a whole house remodel, appreciate the education I get from every single Build Show Network video. I like to know what my options are so I can choose the Yugo or the Ferrari version of products that will suit my remodel and budget. I want my builder to show me these options rather than just assume want the Yugo solution. I become a better informed homeowner by watching the Build Show Network content. And for that I am truly grateful to these folks for sharing!

the builders around my area, southwest florida, are starting to use these now. I've done about 15 so far and have a house coming up that has 13 of these. As these get more popular I would like to see them offer frames in all standard sizes. Anything less than a 36 inch door you have to cut every horizontal piece of the frame. To me this is a big pain in the ass, especially when I have 13 coming up, of which only 2 are 36". Great product though and I am recommending them to all the builders we work for.

Matt, do you have a recommendation for a commercial grade latch set for the pocket door? I have two bathrooms in a commercial building that need the latch mechanism upgraded to something more substantial for the amount of use that they get.

sometimes a more expensive product is actually cheaper when you factor in labor and long term costs. knowing when that is true is called experience.

Awesome product!

You could see it took this guy everything in his being not to say Aluminium. 😂😂😂😂 nice product!

As a DIYer this looks great but then I need to do more finish work to a bare bones door. More specialized tools and knowledge I need to figure out how to accomplish. Any doors I can find that are made for pocket door hardware?

I just installed two pocket doors and they were a hassle, it’s not something I do often and on top of that after they were installed one of them got cut wrong putting the pull handles it was the first time my partner ever installed the pull handles and the notch for the handle accidentally got notched to big so the door had to come back out and a new one installed he learned a valuable lesson, but I’ve made similar mistakes myself so as they say sh-t happens thanks for the video I’ll look into this pocket door if I install another one or two.😮

Very nice. How could you insulate for sound deadening?

I'm about to put 4 new doors in our place. we are considering pocket doors and barn doors.

My man at 3:10 using natural eye protection (squinting) drilling metal overhead while the safety glasses protect the cap. I've done it before too...

I personally can’t wait until the price on these come down! As a remodeling contractor i find it hard to up sale cavity sliders. Many people chock on my prices normally let alone the 4xcost on cavity sliders.

Are there shallow receptacles to fit a light switch alongside these doors, or would the switch have to be moved down the wall where there’s room for a conventional box?

Just installed three cavity sliders. One worked great. The other two not so good. The first of the two thst do not work that great is that it closes okay , but when you open it seems to hang up. The other one on both the soft open and soft close just seem to limp into place. The soft open, soft close mechanism must be defective.

I love your contents.

Can you do a video on how to turn an existing door, in an already built house, into a pocket door? I have 2 doors I need to do this with. I also need to make it look like it was original... in an 1885 house.

Question, what if you want or need sound insulation in the wall where the pocket door is installed? Is there room or option to install a 3" Rockwool Safe n Sound insulation along with the pocket door for a 2x6 stud wall?

Is the doorway 34 inches? I worked in a Commonwealth Ave 4 or 5 story Brownstone which was converted to a Salon, they have wonder pocket doors, I love them. I not a fan of modern architecture, I like crown molding. I love in a 1947 home in New Hampshire a Cape Style. It's amazing how poorly they build this house compared to the two family home I lived in in Boston which was build in 1930.

Why was the sheetrock ripped from the ceiling? Did you forget to do something and have to open up the cavity? I looks like the 2x6 above the top rail is new.

I was hoping for double frosted glass pocket doors in my home. Would this system work for us? We have 9 foot ceilings.

Have you ever installed a packet door that is directly behind the shower with a tiled shower? Is this not recommended to insure the stability of the wall or can it be done safely with the proper pocket door system?

How does the Sound Transmission Class (STC) for these doors compare with standard swinging doors?

my questions are is it priced similar to the Eclisse systems? Can you mount electrical boxes like the Eclisse?

I contacted our local supplier and gave them our pocket door schedule for some reason they sized the doors 1" wider than what was specified. I can't find any cavity slider videos that state you should order your pocket doors 1" wider than what is shown on the floor plan. Anyone have any insight on this?

I have a gripe with CAvity Sliders. I put 4 of them in my house I built for myself about two years ago. I have one of them that was open about 6" and had a 60lb dog come running through it and broke the guide. I think that's understandable. I don't expect a guide to withstand that impact. My problem is with the guides design. It is a plastic piece that fits into an aluminum plate that then slides into a grove in the bottom track. I ordered a new plastic guide then pulled the door and tne went to try to get the plate out so I could change out the guide. Well apparently that's not an option. Once the finish floor is in place there is no getting out the plate that holds the plastic guide. I couldn't believe it. This is a part that is going to need to be rep;aced every so often and there is no way to replace it. Emailed Cavity Sliders and they confirmed that I have to remove the finished floor to slide out that plate and change the guide. Come on! That is the dumbest thing I have heard of. JUst make that plate so it doesn't slide in the track! Come up with some other way of attaching it. This is the only part in the door frame that I can see that will ever need replacing and there is no way to replace it! STill a WAY better door frame than any others out there but this is a huge design flaw

Now can you work on a system for pivot door systems. Especially the over sized entry doors. The over five foot by over ten foot monsters.

I was also not a big fan of pocket doors because of the low quality functionality. This seems like a much better option. It does seem like a lot of work having to hang some slab that you have to take down later to install the real doors.

Matt, Does anyone build a door system like this one that can be installed in an exterior wall?

What application do they have block walls?

Thank you for your kind words about this product. ru-vid.comUgkxgmlSSlIRNE_C2UjNrRD8KfUXsZIM7WNF I'm pleased to hear that you have found the plans to be informative and helpful. This product aims to provide you with a variety of shed designs and styles, each with a clear picture and a detailed diagram. You can easily visualize and build your own shed, or get inspired by the different options available. I hope you enjoy your shed building experience with this product. blush

$1000 for a pocket door kit vs $200 is really hard to justify. Or at least 4x if you don’t get soft close which I find crazy.

Funny you say how you don't need a specialized pocket door guy to build this, but your install has 2 pro installers plus the rep helping the whole time!

quiet feedback for the videographer, having the wall line of the entryway right in the view, and/or the fisheye lens, makes the bathroom look like it's at a different floor height.

Maybe they need to design a value line with a bit less weight.

Add a motor to open/close and its Star Trek!

Like your channel but have a suggestion: get your editor to pay more attention to audio levels. Please? thx.

Almost impossible to find a place to buy these, and when you do there is all these things not included that you have to go to another listing to buy. Then you have to buy the doors and make sure all those things fit for those doors and hope you get all the right stuff when you are ready to put it together. Never mind.

Why didn’t you did this video a couple months ago? I would have definitely insisted on these. But now my framing is up and the pocket doors are sitting in the garage. I’ve already warned my builder these better be as smooth gliding as a baby’s butt 😜

Do they make exterior pocket doors?

How much they cost ?

@CavitySlidersUSA @buildshow Do these kits come with split jambs and all?

Why can I not save this to a playlist?

Cost? Anyone have some idea on how much these are?

I hate our pocket doors, wish we had these 😞

Can I use this on a retrofit

Finish carpenters really piss me off. When you call them, they NEVER answer the phone. Ever! And forget about it if they are working as an independent. They don’t text back. They don’t email back. For god sake. It’s a no bueno situation! I can also guarantee you that their voicemail is full. Got dang!

Inox makes the best pocket door hardware, much more premium feeling than Emtek

👍

A pocket door is better than no door at all, I guess.

As a contractor, I will never install a hidden pocket door again, everyone whether I install it or not has some rubbage somewhere from the cheap frames, and there’s no way to repair it. I sell my customers more on external barn door looks. Now.

SUUUUUUUUPER….

I believe him, he's British.

Love the build show Matt, but it should be mentioned that There is a fourth problem with pocket doors…. No room for j-box!

All my interior doors are pocket doors if i had the room they would be sliding barnstyle

I hope this catches and costs come down. I love watching your channel, but you get into such high end expenses some times. Nice, but way above my budget.

They better be great because it’s a grand for 1 pocket door lol. Actually not even including the slab.

I wish I had money I would redo my whole house

My recent remodel included replacing a pocket door. Nothing is right about this door.

please let me borrow Gilbert :)

My issue is that builders first source told me you have to buy the sliders and everything is sold piece by piece so that threw me off. So hard to justify that kinda money

Johnson has been making systems like this for years, and they are MADE IN THE USA. No reason to pay the freight from NZ to get a great quality system.... unless you are getting paid to make an infomercial.

Would have loved to see it but the long infomercial about a ceramic heater has me typing this and heading elsewhere.

Barn doors solved this problem...lol...mount on the outside and change it when you're sick of it...try fixing or tuning up this door in ten years, you'll have to tear the walls apart...no thanks!

I find myself compelled to stand with my hands on my hips all of a sudden.

I have used these frames a fair bit and like them a lot. They still are pretty floppy at the opening, so I make my own but these are certainly a good solution See mine here if interested ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Cm2x3WD2R-M.htmlsi=Qqo7BAWKHFATmvNB

It's very rare when you actually need these doors. They suck to build, suck to maintain, and suck to use.

These are impossible to find, and no one can tell you how much they are.

That kiwi bloke likes to move his hands a lot when he talks doesn't he?

Meh. I tried to purchase and could not get them. Johnson to the rescue. Same metal style and simple to set up.

if building the pocket and placing the hardware is not in the budget the idea should be shelved. kits are garbage sold as aspirational features that will fail prematurely

If you don't have time to watch then whole video, just listen for the sponsor's name. I know it's weird, but oddly, 100% of the time Matt has recieved money from the same company that makes the product he's graciously letting us know is really a super great product.

Sliding doors have terrible acoustical qualities.

Disappointing that it isn't easier to purchase this kit. 🫤

👍