The ULTIMATE Video Recorder!

Подписаться 734 тыс.

Просмотров 349 тыс.

50% 1

I built a multi-camera recorder box with hot swappable SSDs, one button operation, timecode, an instant import switch and more! See how I made this insane recorder and how you can too! Camera Guides and LUTs: academy.dslrvideoshooter.com My Gear Store: camerafoundry.com
GEAR MENTIONED
CASE AND RECORDERS
Gator Case (Short 4U): geni.us/AvjiN
Gator Case (Long 4U): geni.us/Cfg4EbQ
Blackmagic HyperDeck Studio HD Plus Recorder: geni.us/5ecJ
Blackmagic HyperDeck Studio HD (non-4K Model) Recorder: geni.us/rOWSdt
Blackmagic Universal Rack Shelf 1U: geni.us/TOKC
SSD DOCK GEAR
Blackmagic Design MultiDock: geni.us/Q3ARs
SSD Hot Swappable Rack Mount Dock: camerafoundry.com/products/ss...
Threaded Rod for DIY SSD Dock: geni.us/8moCMj7
Nuts for DIY SSD Dock: geni.us/Vq2AWYi
SATA to SATA Adapter for DIY SSD Dock: geni.us/RF7rx
M3x10 Screws for DIY SSD Dock: geni.us/qDuIOa
SATA to USB Type A Adapter Cable: geni.us/VAGq4
USB Splitter Switch: geni.us/rYvuK
USB-A to USB-C Adapter: geni.us/0vhl
Atem Mini Pro ISO Switcher: geni.us/v2BAgV
3M Dual Lock Tape: geni.us/ogiUem6
REAR PANEL CONNECTORS
Rear Connector Panel
D-Series: geni.us/p3HBn6
Keystone: geni.us/ZK3Z1YY
D-Series Screws: geni.us/o1KWL
HDMI Connectors
D-Series: geni.us/D3WN0
Keystone: geni.us/BHQIhWN
XLR Connectors
DIY D-Series: geni.us/YSpiw
Coupler D-Series: geni.us/pisAZ
Ethernet Connector
D-Series: geni.us/9lBmFx
Keystone: geni.us/SHzGV
3.5mm Connector
D-Series: geni.us/RjhvGe
Keystone: geni.us/io57Tv
USB Type A Connector
D-Series: geni.us/1AcYf
Keystone: geni.us/yrgM
USB-C Connector
D-Series: geni.us/kp2Xam
Keystone: geni.us/cKSyBe
Blank Cover
D-Series: geni.us/WFB9B
Keystone: geni.us/rVnuY
POWER AND REAR COVER
1U Power Strip: geni.us/np1e
Power Splitter Cable: geni.us/2g03I
Short Power Cables: geni.us/MDoq
Rear 2U Cover: geni.us/1PMQET1
TIME CODE AND AUDIO RECORDER
MixPre-3 Recorder: geni.us/6qktRBB
Short BNC Cables: geni.us/kIKj
BNC to 3.5mm Cable: geni.us/fTFr
NETWORKING
TP Link 8 Port Switch: geni.us/Bx5MS
Short Ethernet Cables: geni.us/uAgXo3N
VIDEO CHAPTERS
0:00 Introduction
1:08 Demo of the Case
4:27 Case Build
5:35 Blackmagic Hyperdeck Recorders
7:22 Blackmagic Universal Rack Shelf
7:55 Hot Swappable Hard Drive Rack Mount
9:28 SSD Wiring
11:02 Single SSD Switch Button
12:34 Camera/HDMI Wiring
12:54 Atem Mini Switcher
13:55 Rear Case Connectors
15:30 Power Strip and Cables
16:09 Rear Panel Cover
16:42 Audio Recorder
17:30 Timecode and REF Wiring
19:15 Networking Switch
20:22 HyperDeck HD Plus Settings
23:07 Cons
25:09 Version 2
26:15 Pricing
28:01 Thank You/CineBack Teaser
DISCLAIMERS & AFFILIATIONS
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Affiliate Links:
Amazon (PAID LINK): geni.us/EeI6W
B&H (PAID LINK): www.bhphotovideo.com/?BI=6566...
This video was not paid for by outside persons or manufacturers.
The content of this video and my opinions were not reviewed or paid for by any outside persons.
#calebpike #dslrvideoshooter

Кино

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 590

@stereothrilla8374 8 месяцев назад

🎬IMPORTANT🎬 Hello! 15 year veteran production sound mixer here. Just a heads up on the BNC cables for the timecode daisy chain. Make sure that you are using 50 ohm cables specifically for timecode and not 75 ohm cables for video or you may experience problems with drift. Love the build! Well done sir!🎉

@user-ji6nb4qf8h 3 месяца назад

This is not quite correct. Blackmagicdesign equips all of its devices with 75 ohm connectors. According to BMD customer service, 75 ohm cables work without any problems.

@_vr 2 месяца назад

A lot have changed on 15 years

@stereothrilla8374 2 месяца назад

@@user-ji6nb4qf8h You are correct. I transposed the numbers.

@AllanVolcy 2 месяца назад

@@user-ji6nb4qf8h Oh wow really? Technology keeps advancing!!

@thidnascimento 8 месяцев назад

Do I need this? No. Did I watched everything with extreme interest? Hell ya. Nicely done! Another insane build

@imatleast12 8 месяцев назад

It’s crazy how creative each of these builds are.

@dslrvideoshooter 8 месяцев назад

Thank you! They start out simple but usually end up a little over the top ha!

@Jsjsjjssjs 8 месяцев назад

This is literally a standard switcher/recorder, he did nothing new

@paleyosezi3122 8 месяцев назад

This guy is a beast. My only blame is every time he showcases something I ended up buying it whether I needed it or not. I bet you I already wanted one if those.

@JulienDeon 8 месяцев назад

@@Jsjsjjssjs actually he did! simplifying a multi dock and data switch making it extremely versatile

@itainteasy 8 месяцев назад

@@Jsjsjjssjs you just don't understand, video professionals don't have to know what a 16 dollar ethernet switch is, or a 10 dollar amazon usb switch, that's for cOnSuMeRs that's beneath them and is "makeshift" "DIY" "creativity" when they do anything that LA film school didn't hand feed them from their sponsored curricula.

@dadjake 8 месяцев назад

you could also add a powercon connector so you don't have a power cable hanging off the back of the case (fits perfectly into the D series slots). You can also loop it through, to add more equipment with another powercon out connector

@MrJrichall 8 месяцев назад

That’s what I did for a mobile streaming rig using a similar setup to Caleb, but focused more on multi-cam streaming. Got a custom designed d series panel from redco audio, and even added a fan that kicks on if it gets too hot in the box.

@dslrvideoshooter 8 месяцев назад

Genius!

@shantanu.mp4 8 месяцев назад

Somehow you literally manage to outdo yourself, every time. Well done Caleb.

@behindthelenstv139 8 месяцев назад

In complete agreement with your entire statement, his builds literally starts diy trends inside the film world. Salute and director respect to you Caleb!

@SaschaPallenberg 8 месяцев назад

This is hands down the coolest builds I've seen so far. Wow... just wow!

@darrelladcock 5 месяцев назад

THANK YOU! This is so helpful. We are beginning the planning on a portable system for our church, and what you have achieved in efficiency and economy hits a tremendous sweet spot! All of the detail is appreciated!

@davidcenteau-depina6192 8 месяцев назад

This is a great setup. I'm not a video guy. I'm an audio guy but I saw the thumbnail and I absolutely respect anyone who creates a great, streamlined rack for what they need to get the job done. Brilliant!

@gleep23 3 месяца назад

I'm not an AV expert, but in IT. I use rack systems every day so I was curious. This is the personal hacked together, form & function, perfect device for a common or personal use case, designed from operational experience in mind. It's a brilliant little unit. You managed to keep the price for rigging it up extremely cheap, especially when I compare to IT rack installs. I'm now inspired to rethink my home rack use, where experimenting is easy. I could probably make use of 4U interface at my Workstation desk. I enjoyed learning about AV production side. I'll be checking out your other builds. Thanks Shooter!

@jamalgumbs7518 8 месяцев назад

This is insane! You've really put something amazing together.

@Jsjsjjssjs 8 месяцев назад

This is literally a standard switcher/recorder, he did nothing new

@azadvertised 8 месяцев назад

The thinking that went it to this and the execution ... fantastic. Also loved hearing how you would iterate on it and make it better. Amazing build

@joelstichler4152 8 месяцев назад

I absolutely love these builds. I probably would never need anything like these builds, but it's so cool to see just what you can do. You are incredibly creative. Definitely why I subscribe. Love supporting creators like this.

@willcarter7079 8 месяцев назад

We had a similar rack at my previous job. It was SDI instead of HDMI. I really liked what you did with the SSDs and the switcher. That was really clever.

@artysanmobile 8 месяцев назад

I’ve been building custom solutions for my remote recording biz for decades. The D-type panels, the short jumpers, the scotchlok - all so familiar. I would recommend to your audience to use a larger case, both taller and deeper than the actual requirement as you mentioned. What you didn’t mention is heat. (my bad, you mentioned it at the end👏🏽) Remote work takes place wherever and whenever and an air-conditioned room would be the exception rather than the rule. It’s very easy to underestimate the heat buildup resulting from a packed solid rack full of devices which on their own have no problem at all. For your setup, a blank space above the recorders should suffice, so 5 rack space if available. Extra depth not only accommodates wiring but also heat overload. I generally add a minimum of 5” depth to handle both. Nicely done.

@MelvinMaya 8 месяцев назад

Love, love, love this! I can easily think of endless practical uses for it. From my podcast setup to my paranormal investigations! Thanks for the detailed walk through and something that is very clean and finished and easy to use.

@cnex101 8 месяцев назад

Caleb, It's hilarious you published this video just now. The last ATEM Case video you made, inspired me to create one for my church. We setup and tear down each week and I wanted a better and easier way to handle our live stream broadcast. Works perfect! And over the last 3 weeks I've been looking to upgrade our "Stream Kit" to a Rack Unit and fit a few more things in one case. Regarding your v2.0 of the rack, you may already have ventilation in mind, but I found these online which you might be interested in. "AC Infinity CLOUDPLATE T1 Quiet Rack Cooling Fan System (1 RU, Exhaust)" And there is an Intake version too, if you have the space. They seem quiet and effective for moving air in and out of the rack. I really like your 3D print and SSD solution! This is awesome and it has caused me to rethink a few aspects of my build. I may end up doing a similar thing. Question, how difficult would it be to modify the 3D SSD Holders to allow fro screws in the bottom? Like what if I only wanted to fill in half of a 1U with 2 bays.

@cepheus 8 месяцев назад

I have the AC Infinity Exhaust and while effective, it can get pretty loud beyond speed 3. However, it gives me a peace of mind that my rack won't overheat or lag.

@TCJOHNSTONE 5 месяцев назад

I love the new direction of your channel and direction in life. It literally took over a conversation with some friends this week. AND this kind of think feels so you. I am a huge fan. keep up the amazing work.

@cogmission1 8 месяцев назад

Caleb, you are SO creative! (...and you've made such a huge contribution to the industry and shooters everywhere!)

@RadTwin 8 месяцев назад

The creativity is next level!! I love to see it. Thank you for inspiring us

@maicovimuto6341 8 месяцев назад

My man! I have been waiting for a build like this in the video world. I come from the high-end audio scene where there are tons of rack builds like this, but I just couldn’t find any inspiration or someone on youtube on building this. This looks to be the next thing to Mcgyver for me! (With mentioned SDI ports ;)) Thanks Caleb!

@Luiscameraman 8 месяцев назад

Dude ur vids are just out of this world! really loving this more complicated setups and custom builds u have been doing.

@LeLabSecret 8 месяцев назад

Bravo Caleb! As always, super nice and informative to watch !!

@Eddy04tv 8 месяцев назад

This is insane!!! Caleb this is mind-blowing. This re-shapes my though process for video workflow. I got to reconsider getting a 3D Printer, indeed.

@Will_Zhao 3 месяца назад

The whole thing is so satisfying to watch, it must be a blast to build. Such a clean design!

@BryanSchultzitis 8 месяцев назад

A. your builds are always amazing/creative solutions! Even though I'm not in this world anymore, I still love watching them. B. using a camera as a mic handle is such a wonderful flex, haha.

@ACDGibson 8 месяцев назад

Wow! Such a cool idea and execution! Very inspiring! Great Job!👍

@ErnestStevenson-bo3nk 8 месяцев назад

Incredible set up. You've given me so many ideas. Thank you!

@sajjidkh4209 8 месяцев назад

You've really put something amazing together. The coolest builds I've seen so far. Well done 🙌

@Justin_Allen 8 месяцев назад

Very crafty. I love the solutions you came up with!

@alvaromorello 8 месяцев назад

Love your ingenuity! Thanks for sharing this with us.

@DavidOxford606 7 месяцев назад

Absolutely genius! Thanks for sharing!

@randomgeocacher Месяц назад

Really helpful. No words for how many hours I’ve wasted on timecode cable not connected properly. Going back to basics and double checking against someone else was helpful.

@sounddev 8 месяцев назад

Awesome rig! We love how you've integrated the MixPre-3 into this setup!

@dslrvideoshooter 8 месяцев назад

Thank you! LOVE my MixPre-3 even though it’s been updated!

@batifishreyes4198 8 месяцев назад

Me encanta estos videos , me llenan mucho de inspiración, muy bueno

@chrismilton8792 8 месяцев назад

This is awesome - I'm impressed and giving me a lot of ideas about our travel set up for producing conferences

@vertigo710 5 месяцев назад

Muy bueno que alguien se dedique a armar cosas "extravagantes" pero super útiles y lo comparta! Gracias!

@koppinen8906 4 месяца назад

This is very nice and infomative video, thank you! I have worked in this industry (corporate/event broadcast) for a few years and hyperdecks are familiar, but that ssd switch trick is very nice. Might use that on a upcoming studio build! 💪🏼

@timlieberherr9676 8 месяцев назад

Crazy Build Thanks for Sharing. Quite some genuis thinking in it.

@GlennUpgraded 8 месяцев назад

man!! you're a legend with this kind of stuff! Love the build!

@CNC-Time-Lapse 8 месяцев назад

This is an awesome setup. This must make on-site jobs soooo quick and easy to setup and go.

@2gunzfilms425 8 месяцев назад

I really appreciate this. Just yesterday i was searching for a rig build to create for a multi cam tv series I’m trying to put together and couldn’t find any information. Thank you so much.

@sonnyboo 8 месяцев назад

Seems a bit overkill when the ISO models of the ATEMS are out there - all cameras and switch recorded to a single SSD drive with a multicam project in DaVinci. What is the benefit of this setup over the ISO ATEM?

@christophermoro 8 месяцев назад

You’re a genius. Thank you for this video. Just incredibly smart and impressive. 👏🏼👏🏼👏🏼👏🏼

@AlexKnightVancouver 8 месяцев назад

Ingenious build. I expect nothing less from a DSLR shoot video.

@klavierunterricht-bergstra2187 8 месяцев назад

This is f****ing awesome, great job. We do multiple camera shots and this video is an inspiration, solves so many problems. Not cheap, it´s for professionals, THANK YOU

@PaulTakesPhotos 8 месяцев назад

I always watch your episodes and I have no clue why, cause videography is not my thing, but that said you are the McGuyver of RU-vid. Love the creativity and dyi you put in your channel. 10/10 🎉

@AnthonyRose 5 месяцев назад

Caleb, this might just be the exact setup I need to launch my live production side of my business. Thanks for the walkthrough!

@eniolarufus 8 месяцев назад

I am just in awe... this super awesome.

@StroStylez 8 месяцев назад

Wow that thing is DEEP. But deff needed if you're doing the work. Had to come show another dope creator some love 🙏 Keep at it!!

@joachimschranzhofer5566 8 месяцев назад

Thanks for sharing! I am currently working on something similar with a total of 7 Hyperdecks and 3 Ultimatte for our virtual studio.

@LikeThisReview 7 месяцев назад

On the first hyperdeck you can also set Timecode input to internal (take TC from internal generator); if you want to want to start timecode at for example 01:00:00:00 you set the preset tc accordingly and the use Timecode input = Preset (on first hyperdeck)

@moamenhelmy9510 8 месяцев назад

Man !! I have been a subscriber of your channel since 2016 and I am a fan. However, your content has reached a beast level.

@complexity5545 8 месяцев назад

Real good build. That 4 SSD hot-swappable chassis unit is genius. I have something similar but its basically a enterprise grade EPYC NAS video editing and audio recording server over WiFi. The cameras shoots raw streams over the air and its dump to disk or I can realtime convert up to 6K resolutions with 5 cameras.

@davideastham 8 месяцев назад

You are always blowing my mind !!

@krishartsphotography5643 8 месяцев назад

This is an amazing how to video :) Thank you so much for making & sharing one :)

@CraigHollabaugh 8 месяцев назад

Absolutely killer setup! That took some serious hours to figure out. My only suggestion is, have someone with a fiber laser etch your rear panel port labels. Thanks for putting this awesome project together.

@coffeebeanstudio 8 месяцев назад

Dude, you are CRAZY and that's a CRAZY in the most respectful way.. Kudos bro! :)

@dexterslab_23 8 месяцев назад

Fantastic build!

@wtesolutions 8 месяцев назад

That is pretty freaking awesome. Great build.

@Jeff_369 8 месяцев назад

I love this stuff. Well done!!!

@reynlord666 8 месяцев назад

this is amazing. also TIL the HD video plus records 4k. WISH I' seen this sooner, i've switched to in-body recording and with that, no time code etc. Next upgrade for me is this exact rig! Thank you

@princearthur4946 2 месяца назад

Excellent video production tools!

@Scyth3934 8 месяцев назад

Well done! Looks super professional!

@EthanMatlack 8 месяцев назад

Nice build. Btw a larger USB matrix switcher (or managed switch) can often do the same thing as your setup without all the separate parts and modifications. Not all can do it, but many can. Really simple and there are rackmount variants available.

@KeatsIT 8 месяцев назад

This is freaking crazy man!

@driivenbypassion6849 8 месяцев назад

Very nice I will keep an Eye out when you release this kit for purchase !

@frndztalk 8 месяцев назад

Your video absolutely made my day, mate! I've been searching for this kind of setup for years. Sending love from India! 🇮🇳

@ronnihoirup 8 месяцев назад

You are just so crazy creative with gear - WAU! :)

@MuhammadFloyd 8 месяцев назад

I’ve been thinking and researching something like this so this was extremely helpful! Thank you! Trying to build a convenient portable DIT station

@spielundzeug 8 месяцев назад

I was about to build something similar. (but way less organized to be honest) I decided to go with a Mac Mini Pro with Softron MovieRecorder Express and a Blackmagic Quad Decklink Card. Doesn’t save you money but cable management 😄 and heat. And the files are ingested right away. I’m curious if I can come anywhere near the reliability I would expect your solution to have

@mafacdf 7 месяцев назад

Work of art.

@williamoverton7775 8 месяцев назад

I just love the camera hand mic

@akshajhui 8 месяцев назад

This thing is on another level

@scottievee7467 8 месяцев назад

Brilliant. I can think of so many case uses. You're calling should have been industrial design. Someone like SmallRig should throw money at you for product design for all things camera. Carts... Recorder box... camera rigs... I've been in the design/art field for nearly 40 years. My favorite people to work with are designer/thinker/problem solvers. You got that.

@cncmediapro 4 месяца назад

Listening to you explain the entire build setup is like sitting infront of a former blackmagic design engineer from back to the future. Kudos man!

@ademenchuk 8 месяцев назад

Bro, you are on another level!

@TheEli008 8 месяцев назад

This is pretty incredible

@eliotlespect3363 8 месяцев назад

Nice work this is a beautiful case ! Maybe one little improvment would be to cut the power cord running out of the case and solder the cables to a D-series PowerCon connector, as it seems that you have one extra insert left on your rear panel.

@Aty3Studios 8 месяцев назад

Great work! I have to stop watching your videos - every time I watch your setups, I end up buying something :) very inspiring. Thank you for sharing

@RAndrewNeal 8 месяцев назад

Really nice setup.

@aflahertyphotography 7 месяцев назад

Nice build!

@Supercon57 8 месяцев назад

In terms of heat, you could move the 2U grill in the back to be at the top so as the heat rises up it can vent out the back easier instead of pooling behind that D-series mount

@wubbsy 8 месяцев назад

Had the same thought and the cables would be more towards the bottom so a bit less strain. Could even see building in a few small noctuas in the back for extra air movement.

@jonstuyvesant 8 месяцев назад

Great build

@onocoffee 8 месяцев назад

Cool build but I'm not clear on what problem this setup solves.Was there a particular situation you faced in your studio that drove this build? And what are the advantages of this setup - especially when compared to simply using an ATEM Mini with ISO to record the four cameras to a single SSD?

@neoswallow 8 месяцев назад

I was actually thinking the same. However, with ATEM Mini ISO series, you're limited to 1080p/60fps so if that's fine, I don't think you're bringing much value with this setup. However, if you want 4K source recording, there's nothing in this pricing range. ATEM TVS series starts at $4.6K for proper 4K support. @grahamkay4034 He's recording at ProRes 422 LT so clearly recording at higher quality wasn't his concern but you do have more quality options with HDS series.

@neoswallow 8 месяцев назад

@@grahamkay4034 So ProRes LT is like mid bit rate h.264. ATEM IOS does support up to h.264 70Mbs so it should be comparable to ProRes 422 or even HQ in terms of quality. Where ProRes excels is in editing mode speed as you don’t need to create proxy video.

@neoswallow 8 месяцев назад

I'll take back some here. I was thinking 70Mbps as 70MB/s. Yeah, 70Mbs h.264 should only match ProRes 422 LT in terms on quality.

@dirface 3 месяца назад

@onocoffee Redundancy. Recording 4 cams to 4 drives means if one fails, there are still 3 left etc. In contrast to recording all cameras to one disk.

@topnotchchobbar 3 месяца назад

I am allready using this system, it's really good ❤

@voutzify Месяц назад

Nice little build. I like such specialized custom things. One Idea: Throw in a USB Ethernet adapter on the hub & switch inside the case, one less wire that needs to go to the PC.

@bmxbanditdude 8 месяцев назад

Love it! Super nerdy-awesome! 🤙

@dream-bits 8 месяцев назад

Sir you are a genius. I am amazed of your ideas.

@thebunn 8 месяцев назад

Incredible. This is incredible.

@brentsmithline3423 3 месяца назад

Great setup.

@milesmccreery7676 8 месяцев назад

this is unreal, really awesome stuff

@dslrvideoshooter 8 месяцев назад

Thanks Miles!

@ArifKamaruzaman 8 месяцев назад

Wow.. this is amazing.

@linkslivemedia7050 7 месяцев назад

nice build. I built a very similar case I went with a slide out 1RU monitor. I used a quad multiview. I decided to got with a POE switch to power the decks and rather then USB I just went with FTP file transfers. I also added a wifi router so it can go wireless. I also used the larger case with wheels. and you are right Fans did help a lot I found some variable speed fans that power with USB so you can adjust the speed for noise

@Thomasthetinker 8 месяцев назад

This is cool and very creative!

@benjaminrydberg522 8 месяцев назад

This is incredible! I’ve been researching livestreaming rack mounts for months, and this gave me so many ideas. Thank you for making this video!

@CourtWatchAu 8 месяцев назад

its cool setup, but since the Atem mini ISO allows 5 channels of recording video , onto one usb SSD, wouldnt it be enough to just record on Atem and then use usb switch if he want to quick connect to his laptop for readiing the data of SSD ?

@benjaminrydberg522 8 месяцев назад

@@CourtWatchAu Yes! It would be enough to simply record to the switcher and then try that USB switch trick to connect to the computer. What excites me about this setup, though, are the possibilities for editing the recording. It could be a backdoor solution to replacing Full HD footage with corresponding 4K footage using non-Blackmagic cameras (since the ATEM can only record up to Full HD). It would, in theory, mimic DaVinci’s click-of-a-button solution to replace the ATEM feeds with corresponding camera BRAW files while working in the ATEM-generated DaVinci file. It’d just require some extra work. I’ve never done it myself, so I’m researching to see if my hope is a reality!

@CourtWatchAu 8 месяцев назад

@@benjaminrydberg522 oh ok, thats an interesting application or possibility, thankyou for explaining :)

@stevebliss7042 8 месяцев назад

This is brilliant

@ThisIsTechToday 8 месяцев назад

I see a video from you show up in my sub feed and my wallet cowers in fear 😂

@dslrvideoshooter 8 месяцев назад

💸💸💸

@amrmabrouk3794 8 месяцев назад

Dope Build!

@JKVisFX 8 месяцев назад

Wow! That rig will really solve many production headaches not to mention the time savings in setup. For my purposes, I would need an 8k version of that. Using your blueprint, I will see if it is possible right now. Thank you so much for showing us your build.

@SimplestUsername 8 месяцев назад

Don't use his blueprint. Just buy one Blackmagic HyperDeck Extreme 8k and one Blackmagic Multidock 10G. The HyperDeck 8k handles four 8k inputs and will output it all the the Multidock through one USB-C cable the use the second USB-C port on the Multidock to run to your PC. This build actually makes no sense. He could have just purchased two HyperDeck Studio HD Pro's and plugged them into a USB C splitter, saved money and simplified everything.