The Yamaha R1 Clutch Lurching Fix! 

Thanks!

hi you had some noises going on as well ?

No_Limit_yt Thank you

I can tell you how :) oem replacement or manual tensioner?

No_Limit_yt Getting there!

What year R1?

@@TrackRejects956 09-14 RN22 but mine was build 2010

When someone looking for the parts just buy the last plate/spring of the 07-08 R1 with the gasket of 14B ofcourse...

Did you apply throttle or no?

Cause that's not something you normally do when driving any manual shift vehicle

@@GladiarOfDestruction yeah i applied throttle, didnt seem normal to me. Went with a cbr 1000rr which had waaaay smoother clutch let out and overall responsiveness

@@GladiarOfDestruction but thats how r1's are, later that month i rode my brothers 2015 r1 and rode it on the roughest mode and same thing so

Hey Moe Im gunna bet you have not been able to resolve the issue you have stated . O boy let me drop a golden nugget your way . ..... and everyone else listen to me with joy this problem he has described goes in reverse logic aswell ok .. let me explain ....real quick Moe only thing other then what im going to explain that can effect this would be that you also need to make sure you have bout a quarter inch free play when your hand is off the clutch lever k , now after that here it goes ... your shifting response kicking bike into gear the force that you feel weather it is feeling like its going in too hard and possibly making a harsh noise or no going into gear just barely or missing the grab of gear usually 1st to 2nd has all to do with the adjustment of the shift rod located attached to your shft peg , screwing it in or out will make the transmission like butter adjust and feel shift by hand n then on ride come back adjust agin go out aain untill its perfect .....

@@stevenwheeler5569 Thanks for the reply however i don't see why adjusting the hight of the shift peg is gonna effect the grippyness of the clutch. In my opinion the clutch material is kinda verry grippy stuff so maybe someone got aftermak-rked plates who are less grippy ?

@gasturbine59 it's a big stack of plates. If they had designed it to engage more the clutchlever would be too hard to pull. That could then maybe be solved with softer springs bur would the clutch be strong enough then ? Who nows ? ;-)

Thinking about it i had people seen having issue with the pressure plate or clutchnoise so that could be the bearing in the pressure plate. Imagen that bearing to have the smallest amount freeplay would let the plate move and never lift equal away from the plates causing them so have some friction... I'm gonna think about try to change that bearing with another high quality bearing...

The grabiness of the clutch is no longer something i see as not good. I did the mod to try how it feels but i got it back to standard. For me the only issue is that the travel from the actuator arm on the clutch plate is too short. I would want to have it shorter and not longer but that would make the clutchlever maybe too hard to pull... so i just gonna ride it like i stole it and deal with it 😁

Thank you!

Thanks for clearly explaining that👍 would you know the part numbers for these two parts ? Thanks dude 😎

thats not what is does, it eliminates the slipper clutch. Thats the thing juddering

He did answer 👎🏼👎🏼

Sam Howard 2-3 Days

How are they stretch bolts when tightening torque is 10NM? think about it..

Nope. Theyre not torque to yield

Those parts come stock on the 05 model

Ride it, ya fool!

I found ot what to do ass face amd thats not what u do

@@geatgray7864 Pump your brakes tough guy. My comment echoed the nonsense of your comment, and in some circles, they call that a joke. If you ever want help with something, your best bet is to be descriptive and specific about your issue. The internet is filled with people willing to help out others. Odds are, you aren't the first person to have a problem with whatever you're riding/smoking/killing/fixing. You can't expect advice, or good advice I should say, from an unclear statement, that flirts with the form of a question, lacks any punctuation, wrapped up in a teenagers panicking tone, and is riddled with misspellings.

I have 2010 R1 and have the same issue.. Guess it's normal

Usually, that is the clutch issue that this video is attempting to fix. I will assume that u have gotten this fixed since u posted 4 months ago.

Does this damage the bike or clutch in any way as the bike shakes? Seems like it wants to die until up 2 speed

@@Maskedman167 i think they are all like that. It's a race bike it doesn't like going 5 or 10 kmh. I just found it annoying.

@@rebel7745 Drop a tooth on your front cog, fixes this

Erik Adkins I don’t think so, did the same install on a 2012 Yamaha r1 the clutch does not even engage, just make a screeching noise. Waste of money

gabri12ful sweet, thanks for the info

Did his mod and it fixed the lurching and smoothed out first gear. Used to get a shudder upon take off, that’s all gone. Smooth as butter

Luis Cordova Angulo 😃

You ever ride an r1??

@@Learn-more610 i do in fact own an r1... i have ridden 3 different generations of an r1 to include an r1m. I promise you even the earlier generations are fully capable of taking off smoothly. All you have to do is get proficient with throttle control and your clutches friction point. Its basic shit.