ThePedalGuy Presents NuX Pro Tips Exploring the Cerberus Software 

Thank you for the kind words. It really makes our day for sure!

@@ThePedalGuy how to Reset from FACTORY Presets?

Thank you very much Dan!

Hi Tony. Thank you for your question. Yes you can do this. The CTRL switch can be used to activate the Boost. We covered this in our four part Close Up series on the Cerberus. Have a look on our channel for this series. You’ll learn just about everything you’ll want to know. :)

Ok cool! Is there any reason why it wasn't included in the video's? I mean what an important function especially using this pedal for live settings where you don't want to be tampering with the nobs while going in and out of lead sections! lol So just to make sure......the distortion pedal can be activated...as well as the overdrive (to create whatever sound you want) and then in the middle of playing, you can hit the CTRL button (that is set for boost)....and you can get up to 20db of louder everything for your solo...??

Hi Tony. Actually we did cover it. Just not in this particular video. Here’s the word straight from the NuX page. ‘Control switch can be assigned as Reverb, Mod FX, Drive Section Bypass or Clean Boost (0dB - 20dB)’ Send me a mail at info@thepedalguy.com and I’ll be happy to answer any additional questions.

Thanks for the feedback. I was simply plugged into the main input.

Not sure. I havent used a Cerberus in a few years at this point.

cresshead yes they can

Thanks for the question. According to the NuX site, 24bit/44.1kHz 512 samples are supported. Haven't used the Torpedo so I can't comment there. Be sure to subscribe to the channel. Imma a big time NuX nut here.

The Pedal Guy torpedo operates with 48khz and 96khz, so if I could buy IRs that i can use with both units would be nice, but... Well let me extend this conversation, actually im thinking buy it for portables reasons, im thinking about busking, and I need a pedal needs to be portable and 9v, because most of power tank battery for pedal is 9v, and after research a lot i ended in the cerberus, but to be honest not have a real clean bother me, and besides of it, to me this stocks irs are to muffled , i was thinking about buy some Celestion irs to use with, but I don’t want to spend some money and regret buying it later, I’m thinking use it straight in a bose s1 pro, that seems to be a good PA for my needs. And im afraid that it sounds bad after all. Would be nice to have how much information as possible about this unit. I have also a tube amp rig that i use for band situations, and I could also use in the 4cm. It’s it, im glad for you previous answer about my doubts, but you will help me a lot with any information that you have. Thanks man!!!!

Hi. There is a way to do this via MIDI. I will see if I can find any additional info. At some point once the studio is redialed in properly, we might try to do something a little more in depth with MIDI and the Cerberus.

@@ThePedalGuy cool thanks for the real time answer ;-). Can't wait (+subscrcibed)

Thanks for the detail info about ir response loader. Btw, I download the midi implementation chart on nux website, but it contain only midi control cc for midi in. If only you can confirm that cerberus could sent midi cc messages to control outboard gear.. i will buy it right away.. 😀

@@adhiwisnu It has MIDI *out* but no *thru* This means it could probably work as a MIDI controller in a limited way, but you couldn't have MIDI signals passing from a MIDI controller into the Cerberus then to other MIDI pedals. Line6 M series are the same. If you can figure out how to use it as a MIDI controller I'd be interested to hear your findings. Also, there is a NUX Cerberus user's group on Facebook, that might be the place to post that question.

It's not "full" - because of no MIDI thru. However, If I can use this to control a couple of my MIDI pedals (Source Audio Nemesis, Vertigo, T-rex Replica, Line 6 M5) it'd make life so much easier and I'd consider using the Cerberus fulltime, instead of just a quick option for grab 'n go DI, if I can't use my amps.

Hi. Yes, you can place the compressor before the OD/Dist section by placing it first in the signal chain. Or you can use the 4 cable method to place it before the modulation fx section.

@@ThePedalGuy I mean without adding an external pedal

@@iamironsam Sorry, there's no compressor in the Cerberus, so that's not possible. You would need to add an additional pedal to the signal chain.

@@ThePedalGuy Thanks :)

Sorry to hear that. Never had that problem myself.

ChiwawaReview no. The distortion is analog.

MMS - Melody Musical Studio no

That's too bad.

Andreas Nold thanks for your question. Definitely not a power amp. The Solid Studio would be a better solution which is like the Mooer product. Here’s a link to the signal flow path. bit.ly/2CYWu44

@@ThePedalGuy Thank you so much!

@@ThePedalGuy hey i have a Radar Moar can i use it with this cerberus conecting on the fx- return? so i can use more drfrent Amp? thks.

There’s a bunch of places to buy and download IRs like Celestion and Sonic DNA.

Hi AH. Not quite following you. Please specify.

ThePedalGuy I plugged in the Cerberus via usb and when trying to load some IR no device was found so I don't know if something's wrong with my unit

Did you watch this video? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Q-cZgj4-ytk.html