It's time to take care of that leak! I wanted to do this before the Moab trip, and I'm running out of time. So, today was the day! In this video, I change out my thermostat and housing assembly. I didn't drain the radiator for this, and then I show how I bled the air out of the cooling system with help of a spillproof funnel.
🔔 Please SUBSCRIBE if you want to see my videos! 🔔
Here are the parts I mentioned:
EPAuto Spill Proof Radiator Coolant Filling Funnel Kit:
amzn.to/2MJad4f
MOPAR 5184651AH - OEM Part - Thermostat and Housing:
amzn.to/2o28CbK
Here's what MY manual says about the coolant I need:
MS-12106 OAT (MS-90032)
The engine cooling system must be protected
with a high-quality antifreeze coolant to provide
proper corrosion protection and to protect
against engine overheating. A solution of 50%
OAT (Organic Additive Technology) coolant that
meets the requirements of Chrysler Material
Standard MS-12106 and 50% water is recommended.
Refer to “Maintenance Procedures” in
“Maintaining Your Vehicle” for proper coolant
selection.
MAKE SURE YOU KNOW WHICH COOLANT YOUR SPECIFIC YEAR NEEDS. It's confusing I know. Check your owners manual!
15 окт 2024
