These Shapes Were NOT Easy

Подписаться 63 тыс.

Просмотров 15 тыс.

50% 1

PATREON: / liftarcstudios
STORE: liftarcstudios...
Battery Link:
www.pecron.com...
Affiliate Links:
VEVOR 210 TIG Welder: s.vevor.com/bf...
VEVOR 2 x 82inch Belt Grinder: s.vevor.com/bf...
VEVOR Magnetic Drill: s.vevor.com/bf...
VEVOR 132lb Blacksmith Anvil: s.vevor.com/bf...
VEVOR Stick Welder: s.vevor.com/bf...
VEVOR Welding Helmet: s.vevor.com/bf...
VEVOR Lift Electric Hoist: s.vevor.com/bf...
VEVOR Rolling Garage Stool: s.vevor.com/bf...
Thanks for watching!
To inquire about a custom build we can help you bring to life, or to be a sponsor of the channel, shoot Tay an email at: Tay@liftarcstudios.com
Produced & Hosted by: Tay Whiteside
Filmed by: Tay Whiteside and Walker Hooper
Featuring: Aaron Dykstra, Spike GefFART
Edited by: Walker Hooper
Music Licensed from Artlist.io
Be sure to follow Lift Arc Studios on Instagram and Facebook!
@liftarcstudios
Liftarcstudios.com
Any technique or methodology shown in this video is purely for entertainment and informational purposes only. Lift Arc Studios and their associated craftsmen are not liable for any injury or damage to your shop or surrounding areas you man incur while trying to emulate these builds. Remember, be safe, have fun, work smart!

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@GillyBerlin 11 месяцев назад

That sound when it shuts... *chefs kiss*

@jimmybaronio479 11 месяцев назад

The prefambulated amulite logarithmic casing was a nice toucb

@carymartz8762 11 месяцев назад

Now if you charge 8K for the gate, you're in good shape. Made in the USA

@gixxerkid3120 11 месяцев назад

I was thinking the same thing, how many man hours went into that gate? Lol

@redcivicsiguy9507 11 месяцев назад

The black soot from acetylene will stop splatter from sticking instead of using the spray. Pipe welding trick to not mess up threads on pipe.

@melgross 11 месяцев назад

The gate door itself is very nice, but boy, it doesn’t match the house at all. We have that in my neighborhood as well, some people put up these chrome fences which don’t go at all.

@SchysCraftCo. 11 месяцев назад

Very unique design. Very nice job.

@al8970 11 месяцев назад

Cross the two flat irons at the angel you want, then weld them solid in middle and bend ends together. You have to cut at the right length to allow for length.

@melgross 11 месяцев назад

That’s what I was thinking too.

@bobbyblizzard8488 11 месяцев назад

Really nice project video!

@curtishatfield9629 11 месяцев назад

Our Alro steel supplier in the Louisville area is the same way on price. Oddly enough, my steel distributer buys all their steel in bulk from Alro but charges me a fraction of the price Alro quotes.

@MichaelRoachWV 11 месяцев назад

Yeah, those Lowe's and Tractor Supply bins are a scam. Luckily, I've got a big commercial hookup for my small scale hobby shop :D

@thefirstcalled 11 месяцев назад

Firstly, regarding your "Jesus Fish" comments: AMEN!!! Thank you so much for sharing your talent, humour and kitty...lol. All kidding aside, the gate is beautiful!

@p1kto 11 месяцев назад

Great build video, however, how much did this contemporary steel gate cost to put on their colonial shack?

@tomkershner4740 11 месяцев назад

what make controller are you using on the shop saber?

@IndustryRule4080 11 месяцев назад

Fun watch as always.... Just FYI... You could have eliminated the extra piece to lock it in (@ around 22 minutes) if you welded one hinge up and one down... meaning the bottom portion welded on the bottom set and the top portion welded on the top set. If that makes sense!

@jimysk8er 11 месяцев назад

what if you did a simple seagull shape over and over instead of the fish? just roll the flat bar in one continuous slinky and bend the middle of arcs that you cut. I waited to see what kind of welds you were aiming for just to see if seagulls would work or not and you did the same amount of grinding I would expect. plus the arcs would stay truer instead of springing back to straight.

@Hu88le 11 месяцев назад

You are pure Einsteins!

@martinsteele3259 11 месяцев назад

Just curious why you didn't make 2 if the spacers instead of just using the middle section?

@miriramgraber2605 11 месяцев назад

Hey I am a lookin at building/buying a cnc plasma cutter and was wondering if with some amateur fab skills I could make some money with it

@johnpope4464 10 месяцев назад

Shop around for steel

@magomat6756 11 месяцев назад

Where is the link for battery pack

@HansWeberHimself 11 месяцев назад

Dental office logo ? 😂

@jamesnichols9592 8 месяцев назад

Just weld the joint before bending

@mlc_fab 11 месяцев назад

ALRO is absolutely rediculous on their prices, they are the same way in Indiana.

@johnpope4464 10 месяцев назад

Filp one hinge

@TERRYB0688 11 месяцев назад

This must be a very expensive gate😬

@cae2487 11 месяцев назад

I just want the lift arc guys to know im going to be terribly disappointed if there is not a safe opening video in the very near future. You can't bring up something fun like that and not follow through with. Just sayin....

@jasengibbens3631 11 месяцев назад

$450.00

@felkonx 11 месяцев назад

Nope - sorry - don’t like the gate. Round organic formed rail … and you install such „edgy“ gate. The gate is beautiful and well made! Take a picture from some distance. Your eyes will be drawn to the gate - because its design doesn’t fit into the environment.

@rmkensington 11 месяцев назад

Let's see your build videos loser

@Jinxid77 11 месяцев назад

Jokes on you, the 400 dollar square tube is actually made from unobtainium, and welds itself.

@magomat6756 11 месяцев назад

A small copper or teflon ring between the both part of the hinge woud make them much rust resistend

@cferguson3368 11 месяцев назад

I miss reading the description.... guess not enough people read them.

@daveloderhose874 11 месяцев назад

Are able to charge enough to cover all you development cost?

@wayneswonderarium 11 месяцев назад

Probably would've been easier to use the slip roll

@johnpope4464 10 месяцев назад

Doing a gate you need to check what it's being mounted to is level

@jeffhines3788 10 месяцев назад

very funny clip you are the best

@cynrich1 11 месяцев назад

Does your area not have code for "horizontal" fences, gates, stair ballisters, etc? Like they are easy to climb for kids?

@LiftArcStudios 11 месяцев назад

Depends how physically fit the kids are

@frigginpos 11 месяцев назад

Awesome work, awesome job. Keep it up, as I don't want to have to kill you!!!

@OldPumpMan 11 месяцев назад

Ahh yes, gotta love the technical jargon overload reference😀.

@krishill7583 11 месяцев назад

Being thrifty, I probably would have used the plasma table to plot the bending form onto a scrap of pallet wood, and cut it out on the bandsaw. Cheaper than steel, easier to throw away. 🙂 Nice gate, looked cool.

@Metaz 11 месяцев назад

@randallcaldwell4611 11 месяцев назад

After watching how you have started to master your new plasma cutter,and your venture into perfecting the hanger process. I am asking how precise can this tool be? Can you make the pieces for historical sailing ships and weld them together for museums and private collections. There are not enough wooden ones to go around for all that need them. Yes it might be a niche.