This $8 Product Will Make Your BMW's Engine Last YEARS Longer! | LiquiMoly MoS2

Подписаться 7 тыс.

Просмотров 17 тыс.

50% 1

In today's video, I show you how you can get thousands of miles more out of your BMW's engine, significantly reduce engine noise and improve your vehicle's fuel economy using LiquiMoly's MoS2 Engine Oil Treatment. For only $8, this product is a no-brainer and should be a BMW owner's go-to for every oil change!
PRODUCT USED:
LiquiMoly MoS2 Engine Oil Treatment: amzn.to/3DTGXRi
Quick-Fill Oil Funnel: amzn.to/447zDMs
Save time and money by SUBSCRIBING for more helpful videos! 🔔
INSTAGRAM: / izzysakran
BAVMODS WEBSITE: www.bavmods.com
MY FAVORITE UPGRADES:
BMW Digital Gauge Cluster: go.www.bavmods.com/ancCXJ
Carbon Fiber Flat-Bottom Steering Wheel: go.www.bavmods.com/JZbTTB
BMW E92 Smoked LCI Taillights: go.www.bavmods.com/tpaY7a
BMW E92 Seatbelt Extender Arm Fix Hooks: go.www.bavmods.com/DfZ0Zo
BMW Carbon Fiber Paddle Shifters: go.www.bavmods.com/KhI3xM
My Exterior Modifications:
E92 M-Sport Style Bumper w/ Fog Lamps Included: amzn.to/3ySPnXg
E92 M3 Style Front Bumper w/ Braking Ram Air Ducts: UNAVAILABLE
E90 M3 Replica Front Bumper w/ Braking Ram Air Ducts: amzn.to/3vUJXrg
BMW E92 Smoked LCI Taillights: go.www.bavmods.com/tpaY7a
Gloss Black Double Slat Kidney Grilles: amzn.to/3re9ok7
CSL Style Trunk Spoiler: amzn.to/3ci0b6p
M3 Style Carbon Fiber Mirror Caps: go.www.bavmods.com/lzFMZI
Aluminum Triangle Tow Hook: go.www.bavmods.com/km7bOu
Black Sequential Turn Signal Side Markers: go.www.bavmods.com/JwnoKO
White LED Front Turn Signal/DRL Bulbs: go.www.bavmods.com/X5Gbfk
BMW E9X Aluminum Roof Racks: amzn.to/3tUNh7z
BMW Black Emblem Set: go.www.bavmods.com/2voyo9
BMW 170-Degree Reverse Camera: go.www.bavmods.com/ISRlEX
Carbon Fiber Fuel Cap: go.www.bavmods.com/1EhSTE
BMW Carbon Fiber Shark Fin Antenna: go.www.bavmods.com/vCbw78
My Interior Modifications:
BMW E9X Digital Gauge Cluster: go.www.bavmods.com/ancCXJ
Carbon Fiber Flat-Bottom Steering Wheel: go.www.bavmods.com/HQrhIr
Carbon Fiber Parking Brake Handle: go.www.bavmods.com/eSFhlS
BMW M-Performance Alacantara Shiftknob: go.www.bavmods.com/Dx0sGw
Carbon Fiber F30 Style Shiftknob: go.www.bavmods.com/EbOJvI
BMW E9X Carbon Fiber Armrest Lid: go.www.bavmods.com/YdPGwZ
BMW E90/E92 Manual Style Shiftboot: go.www.bavmods.com/Mvq8r2
Carbon Fiber Interior Door Handle: go.www.bavmods.com/Fgsjhb
White LED Interior Lighting Kit: go.www.bavmods.com/ENgtuO
License Plate Suction Cups: amzn.to/3facO55
Red Gloss Push Start button: go.www.bavmods.com/mM3zGt
BMW E90/E92 F30 Style M-Sport Pedals: go.www.bavmods.com/gMNl6L
Black BMW Steering Wheel Emblem Kit: go.www.bavmods.com/2voyo9
E90 E92 Gloss Black Push Start Button Ring: go.www.bavmods.com/d8wFiQ
E90 E92 Leather Keyfob Case: go.www.bavmods.com/I4d9YJ
Aluminum Seatbelt Buckle Chime Clip: go.www.bavmods.com/fdGHUK
BMW E9X Carbon Fiber Dashboard Panel Inserts: go.www.bavmods.com/68LkXn
Custom BMW Air Freshener: go.www.bavmods.com/8SJ7t0
Upgraded iDrive Knob: go.www.bavmods.com/yNBQ6P
My Performance Upgrades:
Solowerks S1 Coilover System (RWD): amzn.to/3s8o9rw
Megan Race-Spec Strut Bar: amzn.to/2PlnlQd
Upgraded Air Intake Inlet Silicone Hose: go.www.bavmods.com/WUyv8y
Aluminum Cylinder Head Coolant Hose Fitting: go.www.bavmods.com/alfiGm
Injen Technologies X-Pedal PRO Black Edition Throttle Controller: amzn.to/3yFSssf
BMW 328i PowerSport Drilled/Slotted Rotors and Ceramic Pads: amzn.to/3foVVCK
BMW 335i Drilled Slotted Rotors: amzn.to/3Hq0tHC
BMW E9X Air Intake Ram Air Scoops: go.www.bavmods.com/MiRkpM
StopTech Stainless Steel Brake Lines: www.fcpeuro.com
M/Sport Full Aluminum Oil Filter Cap: go.www.bavmods.com/vhBOWF
Upgraded Aluminum Oil Filler Cap: go.www.bavmods.com/Mvc1oh
Upgraded Aluminum Expansion Tank Cap: go.www.bavmods.com/MjOQKv
CSF Aluminum Radiator: amzn.to/45CIRCo
Performance Cabin Air Filters: go.www.bavmods.com/VVTXm1
My Wheel Setup:
Niche Misano 18 inch 5x120MM Rims: amzn.to/3lJALkR
5x120MM Hubcentric 15MM Wheel Spacers: amzn.to/399oXmZ
5x120MM Hubcentric 20MM Wheel Spacers: amzn.to/3f3Rv5j
My Lighting Upgrades:
DMEX D1S 6000K Cold White Xenon Bulbs: amzn.to/3cc08Zy
BMW 40W H8 360-Degree White LED Angel Eye/Halo Bulb Set: amzn.to/3Qurj4b
White LED Interior Lighting Kit: go.www.bavmods.com/ENgtuO
White LED License Plate Lights: amzn.to/3se8lSN
Black Sequential Turn Signal Side Markers: go.www.bavmods.com/JwnoKO
BMW E92 Seatbelt Extender Arm Fix Hooks:
go.www.bavmods.com/DfZ0Zo
My Diagnostics Scanner Tool:
Foxwell NT510 BMW Full Diagnostic Tool: amzn.to/3c6b0Fc

Авто/Мото

Опубликовано:

11 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@toddadale 8 месяцев назад

I am sold - Run it in my 911 3,2 - Should have done it years ago! Runs smother, less oil burn. Had my 911 for over 10 years and know it well. All around great product. They make great motor oil to go with it.

@user-ns4eg9bt4x 10 месяцев назад

youve been dropping alot of extremely helpful e9x / bmw content lately bro, like alot of questions ive been having and things people havent been adressing, thanks bro keep it up fr!

@IzzyE9X 10 месяцев назад

I'm glad to hear it's been helping you! If you ever have any video ideas that will help the community, I'm always open to input

@UwUthunder 10 месяцев назад

I'm not trying to discredit your video or anything but... the effects of the engine running more smoothly and silently could easily be credited to the fresh new oil you put into it and that it was just time for an Oil change. To 100% say the additive works you would have to have 3 clips (before, new oil and new oil with the lm additive). Just my 2 cents.

@IzzyE9X 10 месяцев назад

the sound clips were both after the fresh new oil change. I changed the oil, took the 'before' soundbite, then poured the LiquiMoly and only a tad bit of oil to wash the LiquiMoly down. I did not conduct an entire oil change before pouring in the LiquiMoly.

@therealeffingdeal 5 месяцев назад

Probably should have mentioned this in the video or description. You also mentioned that you have been using this product for years. Pretty amazing how different your engine sounds before and after the additive after all this time. You would think/hope this stuff would accumulate and offer a bit of residual protection but it seems it all comes out every oil change. Good video otherwise. I would use this on a new(er) engine but skip it on older high mileage ones.

@kamimaza Месяц назад

That’s inaccurate, oil change tend to renew oil which result in a less viscous oil and often new noises are exacerbated after an oil change.

@babydriver8844 7 месяцев назад

I think this would be good in the m3 with the rod bearing issue with liqui moly oil I feel liqui moly makes some of the better engine oil

@luissantana5404 2 месяца назад

Does this leave any residual within the motor?

@HH-wh1xt 8 месяцев назад

Say I can get the powder MOs2 , What method can I use to add this to an engine oil change?

@jaysnyder7367 8 месяцев назад

IzzyE9X: Great video. I do use LiquiMoly MoS2 on my E92 M3, but not every oil change. When I do use it, I use the whole bottle with LiquiMoly 10W60. Question, do you use it every oil change???

@IzzyE9X 8 месяцев назад

I personally use it every oil change, but only use about 1/3 to 1/2 of the bottle

@user-zu4rq2jl4d 10 месяцев назад

Thanks for the videos I started watching when I got my 06 325i two weeks ago!

@IzzyE9X 10 месяцев назад

glad to have you here in the community ❤️

@vipul_singh Месяц назад

Maybe put in better quality oil, instead of an additive pack?

@eliasbutcher859 3 месяца назад

What about ceratec???

@hallelujah...5356 6 месяцев назад

Mos2 in a Opel Zafira A 2.0 diesel with 477.000 km really made the engine smoootheer....low the noise and run smoother....îs better than Ceratec for exemple...really better

@cockylokie7865 Месяц назад

There is a recommendation to the amount of MoS2 it’s 5% of your total amount of oil needed. So if you need to put in 5 Litres that equals 250ml. So you can easily add more to your next oil change. 2:57

@ishkaranbrar313 5 месяцев назад

My accord hybrid holds 3.8L of oil so should I add this top of 3.8L of engine oil or should I put in 3.5L of engine oil and fill the rest of the capacity with this?

@fkturdo Месяц назад

Seems like a no brainer. Whats the capacity? 3.8 or 4.1?

@brianfulsom1605 5 месяцев назад

I don’t have a BMW (2019 Ford Fusion 1.5L EcoBoost) but I alternate between running MoS2 and Ceretec after every oil change.

@tbone7844 10 месяцев назад

Can these treatments cope with all of that heat and friction over a lengthy session on the throttle ?

@IzzyE9X 10 месяцев назад

Yes, it works as an enhanced lubricant.

@DruedrizzyTv 13 дней назад

Do you recommend to use this on a b58 that’s has lifter tick

@IzzyE9X 13 дней назад

what oil weight and brand are you using?

@zubtubetube 5 месяцев назад

100% agree. Using Mos2 on my 400cc Dominar and Kawasaki Z900, works like charm. When my friends ride my bikes who have same bikes immediately say, why your bike is smooth and responsive ❤. Giving this input after using this from past 5 years on Dominar 400 and 3 years in Z900

@JH09SUMIT 3 месяца назад

Hell yeah.. I was looking for such a real life review. I'm gonna use it in my RC 200 too

@Caleb__main 10 месяцев назад

Liqui Moly recommends this for high mileage cars and classic cars so I don't think I'll use it while my cars only on 69,000 Miles

@whlawson5812 5 месяцев назад

69k miles is a good start for MiS2. Don't wait for more miles to start on it as I might be too late after getting too high a wear in your engine parts. I am soon getting a can or two!.

@kaosaefong2270 10 месяцев назад

I have a BMW to its n52 and also have N55 but that's the only have the implied to BMW or can we put on Japanese cars too?

@IzzyE9X 10 месяцев назад

this product states on the back “for all 4-stroke gasoline or diesel engines, with or without turbos” so I think you’ll be safe even in a Japanese car

@Drift-K101Slipp 10 месяцев назад

@@IzzyE9X ok thnx...I see I just have to make sure it's a 4 cylinder only...😃

@IzzyE9X 10 месяцев назад

no a 4-stroke, that means any engine basically 4 cylinder and 4 stroke are different haha

@Drift-K101Slipp 10 месяцев назад

@@IzzyE9X I got it

@marisrozleja8762 Месяц назад

MoS2 was used in plane engines as a back up measure should the engine lose its oil. This gave the engine enough lubricity to assist the aircraft to land.

@IzzyE9X Месяц назад

this is extremely interesting, thanks for that info!

@marisrozleja8762 Месяц назад

MoS2 was used in aircraft engines in WW1 and I suspect also WW2.

@Ingris1441 10 месяцев назад

Please tell me where i can get the msport fender liners. I cant find them at all. I threw on the M sport front end and the liners dont match at all, so please let me know

@buttsaabgee 7 месяцев назад

I,ve glc 2021 with 35KM and do my service myself. I notice extra clickig noice even with newer oil, I added LM Mos2 instenlt engine said thank you, LOL. I meant engine gone about 50% less noise and instantly feel smooth running engine. I tried my friend BMW X1 2019 without telling her. she asked right away what I did to her car. and she told me its so smooth and feel more power. I'm not sure about extra power as she used to hear engine now its %50 quite may be she push more gas to feel use to noice and car give little extra noice and she think extra power. But sure make engine lot Quiter and smooth if you know your car.

@arshiavali1597 5 месяцев назад

hey men how u doing, just wanted to ask is your both cars ok after using this for a year now?

@PokeSleepDeals 4 месяца назад

You use the whole bottle ?

@danieljipescu943 Месяц назад

How about CERATEC?

@marisrozleja8762 Месяц назад

They are basically the same product. MoS2 is added every oil change while Ceratec lasts for several oil changes.

@snowman2834 3 месяца назад

Oil, is an extremely good lubricant, wear reduction, low friction etc. Unless there are issues with your car stop putting additives to it. Use thicker oil if you want it quieter

@luissantana5404 2 месяца назад

Thicker oil makes it louder. I have a 2005 Hyundai accent 5w-20 motor oil. The Walmart guys accidentally poured 5w-30 in my motor. My car was running loud and burned a lot of fuel. A thinner oil makes the car run smoother and saves gas. Why do you think liquid molly increase mpg? Because it makes the car run smoother and less friction

@ismaeel624 10 дней назад

Just buying quality engine oil solves the problem normally. But using additives have play role too depending on which one you buy

@IzzyE9X 10 дней назад

@ismaeel624 this is a very reasonable comment

@maxdruciak2724 4 месяца назад

Is it better than Ceratec?

@LoveableRogue 3 месяца назад

Ceratex is the better, but more expensive option

@maxdruciak2724 3 месяца назад

@@LoveableRogue Ok, but why is it better?

@eliasbutcher859 3 месяца назад

@@LoveableRoguehow is it better?

@HaleyAmaris 9 месяцев назад

I have a 535i & wanna take better care of it where should I start?

@maxdruciak2724 3 месяца назад

Change oil and oil filter every 4000 miles or 6 months. Every one or two years change engine air filter, fuel filter and cabin filter. Every 30000 miles change the sparkplugs. Put the best gas you can afford. Do not red line the engine when it is cold. Eventually, drive the car on the highway for 2 or 3 hours. Wash it once a month...

@isthisthekrustycrab1428 2 месяца назад

Lmao I poured the whole bottle

@elektro3000 4 месяца назад

Adding moly disulfide is a useless waste of money at best and dangerous to your engine at worst. This is basically a solid lubricant suspended in a heavy oil...almost like you're dropping a spoonful of axle grease into your oil pan. It's most likely to collect at the bottom of the oil pan and/or your oil filter. Worst case, it clogs up your lifters and/or VANOS solenoids (or any other engine's cam phasers). I'm a metallurgical engineer at a major automobile manufacturer and a big part of my work is wear and failure analysis on gasoline engines. We work closely with lubricating oil manufacturers to specify exactly what should be included in engine oil and then the engines are designed to operate with that type of oil. If a big glob of super high viscosity oil packed with moly disulfide made engines last longer and run quieter, we'd write the specifications for the oil manufacturers to blend it in. It would help us meet our engineering targets and make our lives easier. It's not blended into the oil because it doesn't help.

@PokeSleepDeals 4 месяца назад

I’ll try it & let you know on a CLA250. Real life trials are better than equations

@LoveableRogue 3 месяца назад

Hi Elektro. I'm glad to be reading some actual science from a metallurgical engineer in this thread. In view of both your academic and professional knowledge, I will accept your advice to not install LiquiMoly MoS2. I'd be very grateful to receive your further advice: Five years ago, I bought a 2003 BMW E46 318i running an N42 engine with 105,000 miles on the clock. I bought her for only £725 = $915. During these five years, I've only driven her a total of 10,000 miles. I admit that I've not done any work on her engine, and the oil is black. I now finally have the time, the money, and the inclination to look after her, which is what's brought me to this thread. For a 2003 N42 engine, BMW recommends a 5W-30 oil which complies with the BMW LL-01 (LongLife-01) specification. However, because she's got 115,000 miles, and no oil change during AT LEAST the last 10,000 miles, should I instead be installing 5W-40? At the same time, because E46 RU-vidrs rave about them, I'm intending to install a Hengst oil filter, as opposed to a BMW OEM, Mann, Mehle, or any other filter. Do you approve of Hengst? Simultaneously, I'm going to be changing the spark plugs. I've been reading that more important than the brand is that I should be installing plugs which are double platinum or, even better, triple platinum. Or, even better, iridium plugs. Do you agree that NGK iridium plugs are the best way forwards? The garage which will be doing all those jobs is recommending that because the engine has not been maintained for AT LEAST 10,000 miles, it should be flushed before the new oil, new oil filter, and and plugs. I certainly accept your advice about Mos2. Would you recommend a standard LiquiMoly flush for this 20 year-old engine with 115,000 on the clock? Many thanks. Best, Michael

@jayy7712 28 дней назад

@@PokeSleepDeals What happened?

@PokeSleepDeals 28 дней назад

@@jayy7712 It made it more quiet but no dramatic change

@giwtwm 25 дней назад

service manuals specify putting molybdenum disulfide grease on cam lobes and rockers .

@realworld822 7 месяцев назад

Right , you should have changed the oil first and then do sound test Also, mos2 should be added. In older cars 2000s and lower On newer cars you should use ceratec