This 15" MONSTER SUBWOOFER will shake your house! Insane Bass!!! DIY Home Subwoofer Build MX15-22

Подписаться 96 тыс.

Просмотров 104 тыс.

50% 1

#diyhomesubwoofer #subwoofer #hometheater
This DIY Home Subwoofer is a monster. Dayton Audio recently released their new maximum excursion MX15-22 15" subwoofer. So what did I do? Built a monster Home Theater subwoofer tuned down to 20hz, that is guaranteed to have you feel those deep bass notes that you don't know you are missing. Check out build ideas: toidsdiyaudio....
DIY Home Subwoofer used: MX15-22 - PE: parts-express....
Amplifier used: Crown XTI-2002 - amzn.to/3lJJrdc or parts-express....
Europe
Mx15-22: bit.ly/2XbQcdL
Tools Used:
Ford Versus Ferrari 4K Atmos: amzn.to/3xw81AB
Jigsaw: amzn.to/3lIVt6w
Speakon Mount: amzn.to/3Cl5Sv4
Speakon Connectors: amzn.to/3lHaOod
Corner Clamps: amzn.to/3fEyWnt
36 Bar Clamps: amzn.to/3lPZBl8
Gluebot: amzn.to/3CsiuR3
Wood Glue: amzn.to/3lIQ6EA
1" Spade bit: amzn.to/3jDMfpL
Acoustic Foam: amzn.to/2VzBQDo
Wire strippers: amzn.to/3lHbsC9
OFC Speaker Wire: amzn.to/3AmIImq
🔥 Where to Buy Speaker Parts and Kits:
US and Canada: parts-express.... get 5% off with code TOID
UK and Abroad: bit.ly/3skOGRJ
Worldwide: Amazon: amzn.to/3aPhKYD
Car Speakers/ Home Audio and electronics: howl.me/cg5oP9...
🏠Get Whole House Audio:
Arylic: bit.ly/2wFUUQ4
🍿Theater Seating
Valencia Theater Seating: bit.ly/3Jbagjm
📄Speaker Plans: toidsdiyaudio....
🎙️Sound Advice Podcast: anchor.fm/soun...
🎧Buy Audiophile Headphones: howl.me/cg6GDj...
🆓Get it with Prime - Free for your first 30 days: amzn.to/326cZqe
FREE Audio Books for 30 days from Audible: amzn.to/3a7lBS9
👋Connect with Me:
www.toidsdiyau...
🤝 Support:
Patreon: / 123toid
Disclosure: This channel is viewer-supported. When you buy through links on my site, I may earn an affiliate commission. I only recommend products I would use myself and all opinions expressed here are my own.

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 242

@Toid 3 года назад

DIY Home Subwoofer used: MX15-22 - PE: bit.ly/mx1522 Europe Mx15-22: bit.ly/2XbQcdL Amplifier used: Crown XTI-2002 - amzn.to/3lJJrdc or bit.ly/3pUulli

@nintariplays5654 3 года назад

Nice build, makes me wish I had a CNC when I built my 18" version like this... I loooooove the extension well down below 20Hz on mine

@Toid 3 года назад

@@nintariplays5654 it does make things a little bit easier. I just like to stay away from all the dust as much as I can. I just got a new cnc, so that was going to be featured on the channel very shortly.

@nintariplays5654 3 года назад

@@Toid One day I'll get one lol I may DIY build one since my 3D printing is teaching me quite a bit!

@Toid 3 года назад

@@nintariplays5654 I agree! I love 3d printing. Not sure if you saw it, but I just reviewed the Fokoos Odin 5. That this is amazing for the price. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FxtNngl9b6s.html It'll be on the channel when I start doing more 3d print jobs.

@robertburton295 3 года назад

Again awesome build I'm about to order me that 15 and I wanted to know what airspace and what did you tune the box at

@95Sn95 3 года назад

You think about mixes of technology this day n age, your cutting out shapes of wood with a computer guided router robot then smooth it out it with a crumpled up piece of paper with tiny rocks glued to it...! Lol, nice sub!

@Toid 3 года назад

Lol, that's actually really funny! And thank you

@SUBsystemHawgCranker 5 месяцев назад

"if it ain't broke, don't fix it"

@davidfaust8237 3 года назад

My home stereo has 3 12inch subs with each having their own amp. 5 10inch subs with 2 subs in their own box ×2 with 1 10inch in in a box by itself. I also got 5 mids and 5 tweeters as well.. so basically I got about close to 10,000 watts of power just in my house.. lol.. Drives my wife crazy.. I usually have the bass turned down pretty low most of the time but it stills basses like a mofo.. but when I turn the bass up good lord my whole house vibrates and you literally can hear my bass 6 house down from me.. it's so awesome.. Love the Bass, Bass heads for life..

@PartsExpressOfficial 3 года назад

HUGE BUILD! Love the MONSTER, Love the Max-X!

@vijaykumar-np8qq 3 года назад

This is a monster creation . Perfectly build....keep it up 👍.love you from India 🇮🇳

@25hztolife14 3 года назад

Orange was a perfect choice.

@robbiedh02 3 года назад

Gluing this together was fun.

@Toid 3 года назад

You mean watching Ford vs Ferrari? 😁🤣

@EastAngliaUK 2 года назад

Just picked up 2 massive 15 inch ATC speakers will have to look into some kind of amp for them glad they are on wheels and were even free.

@iowaudioreviews 3 года назад

Very nice! Didn't know French's Mustard work well as wood glue 😄

@Toid 3 года назад

Haha! My favorite 😁🤣

@post_historic 3 года назад

Grey Pupon has better adhesion

@spazoq 3 года назад

Your neighbors must love you...

@Toid 3 года назад

Haha! I don't have any neighbors. They all ran off. In all seriousness though, I actually don't have neighbors.

@robbiedh02 3 года назад

Lucky, I'm pretty sure every time I play any heavy bass the neighbors houses rumble. Only 1 has ever said anything, but he just wanted to come over and watch a movie.. 😆

@FiglioBastardo 3 года назад

Holy crap that's some strong ass mustard!

@Toid 3 года назад

Haha! That's hilarious 😂😆😂

@Streckerfamily2 9 месяцев назад

Great work! I really want to build something like this. So far I've built 2 12 in a fourth order and wow its shakes my whole house haha. Keep it up

@randallross3036 3 года назад

Sowing off with the CNC machine! lol Great video!

@Toid 3 года назад

Lol, if you got it . 😁😂

@kentdaigle 3 года назад

He is always "Sowing" off.....

@Billy123bobzzz 3 года назад

A beauty! Thank you!

@vervi1jw1 2 года назад

Looks awesome. This video reminded why I hate working with mdf. That fine dust.

@bibitterare 3 года назад

From Quebec/Canada. Hi, first thanks for sharing your knowledge, project with fun being very pleasant to see and still learning, well done. For this project, when you gave the measurements, it reminds me my 2 pairs I had in the 80's about the same size, 36h*22large*18 deep. Each had 2x12" + 1x4" mid + 4 horizontal phenolic tweeter with a 3 way 150w phillips crossover. Then I made a small change getting an electronic separate crossover and 3 power amp to reach more power for the bass only. That was like this in those years. Now I can't wait to built one or two subwoofer for my home cinema room with previous idea of yours. Thank you again.

@Toid 3 года назад

That's sounds awesome! And I'm glad you enjoyed the video!

@derekleclair8787 3 года назад

Great production video thank you again for great content

@Toid 3 года назад

Thank you. I appreciate it

@2wilbster 2 года назад

Such a great build!

@HifiVega 3 года назад

The enclosure turned out great dude! Those MX subs are beef

@raymonddegennaro3097 2 года назад

Do you have plans for this? Have you considered offering complete 5.1 & 7.1 plan packages?

@robbiedh02 3 года назад

You need to play Decaf White Cloud on this sub really loud and tell Mr what you think. Played it on my RSS390HO-4 15 we built with my crown XTI 1002, pretty sure my basement door will never be the same..

@JoshM7 3 года назад

That's a pretty old overplayed song imo. I remember years and years ago playing that song. These days for 30Hz+ Geoxor is more fun. "Turn Around" might be one of my favorites (they're all pretty good to me at least) as it dips to 20Hz which is more fun.

@muzguz7276 2 года назад

well done. nice build.

@Toid 2 года назад

Thank you

@SarahStaar 6 месяцев назад

I can't find the plans for this build on your website. I really would like to get my hands on it.

@Jorn2024 3 года назад

I build a sub last month. I had 4 bose ds100F woofers they are 5.25”. Put 4 of them in a box. Bought an 4” port of Soundimports. Did have no parameters or whatever. Build the box put evrything in. Perfect tuning at 30 hz and it shakes my entire house. Whitout any calculation Pure luck i guess. It sounds absolute clean. Loud and pure hifi sound Can play easy 25 hz whiteout any problems

@Toid 3 года назад

Nice! It's always great when a plan comes together. And DIY is just fun

@merlin3671 Год назад

Great build, thanks, are you going to make plans available? Would love to build 1 or 2 of these

@rykerhasyounow 3 года назад

Great build!! I bet it hums. I install cinemas for a living and we generally install 4 to 6 X 18" ULFE and 6 to 12 X 15" LFE for the average install. 😳

@DubHead69420 3 года назад

CRAZY! 😱 Do you have any videos of it? Sounds really badass. ✌️

@rykerhasyounow 3 года назад

@@DubHead69420 Not videos. But lots of pics. Ha. No, not really. Sound is amazing. Job involves hours with your head in a rack.

@DubHead69420 3 года назад

@@rykerhasyounow, alright. And I was just thinking of the finished product. ✌️

@rykerhasyounow 3 года назад

@@DubHead69420 Aaaah. I see. You were being sarcastic? NPS.

@DubHead69420 3 года назад

@@rykerhasyounow, no, I wasn't? And what does NPS mean?

@nathankohler7621 3 года назад

Lucky woofer going on maximum excursions while we are I COVID!

@nathankohler7621 3 года назад

In Covid 😵 woops!

@gregyuri3052 Год назад

hello toids i would like to buy the construction plan of the mx 15-22 that you made but i can't find it on your website.

@JuNielminisound 3 года назад

wow great sound😍😍😍😍

@bslave1398 2 года назад

Ford vs Ferrari in Atmos is one of my favorites too!!

@Toid 2 года назад

It's so amazing, right? I just showed it off to family member who came on and never experienced Atmos before. They left impressed.

@bslave1398 2 года назад

@@Toid yes! I think honestly my favorite part is subtle but when they are testing the fast GT40 and the two are talking in the middle of the track while ken drives. He passes them and the camera stays on them as you here the car continue down the track behind you and slowing turning the corner from your right to left! It's just sooo smooth and has such depth.

@toolanddie9789 3 года назад

We're the plans on the website yet? I looked but didn't find them.

@markusredlig6691 7 месяцев назад

Hey! I would like to build two of these myself, but i cant find the plans on your site? Thanks for all your work, great videos!

@hi-fihaven2257 3 года назад

Holy earthquakes Batman! Love that driver, and all of that bracing. Great looking sub, great work on the video!

@Toid 3 года назад

Thank you. It was fun building. And in really enjoying it in my room. I did DSP it for a nice flat response. I'm loving it.

@hi-fihaven2257 3 года назад

@@Toid Thank You much for the reply!

@JesseJames83 3 года назад

cool to see the MaxX line in a build!

@doddgarger6806 Год назад

Had one in the box a while from PE, I need to build an enclosure for it, seems like I figured it up to 21-23 hz around 5 cubes maybe but I don't remember

@doddgarger6806 Год назад

My TC epic 12s in sealed with 2400w just seem to do so well I haven't gotten around to it CE4000 on 110v 😂😅

@Mattyboy88979 3 года назад

I had to stop a minute to check out Umer Therman scene, sorry carry on.

@psyphonyxaudio 2 года назад

Makes me wish I had more of a workshop. I suppose I could have the shop cut a flat pack. 🙏 ..box is so big tho.. haha.

@Toid 2 года назад

Yeah, this box is huge. I'm thinking of trying an auto DSP amplifier on it. See how it works out.

@psyphonyxaudio 2 года назад

@Toids DIY Audio .. Im fixated on doing 4x 15s. DSP amps.. but smaller boxes. I like sealed.. but dont want to miss those low low flutters. Grr.. I cant have both?!.. damn physics

@Toid 2 года назад

@@psyphonyxaudio haha, seriously

@lio1234234 3 года назад

Love the CNC Nick, next project have a look at 3D operations, you could get some really nice geometry on visible panels that way, it can end up looking really cool.

@Toid 3 года назад

I plan to. I have a new CNC that I just finished setting up that will handle that much better. In fact it's on the forum, go ahead and check it out under the section of 3D printers and CNC

@markchristensen3353 10 месяцев назад

Nice sub. I would’ve extended the port up the back wall a lot further. I ordered a new amp for my mfw-15 sub and getting the mx15 driver for it. Hope the mx driver does well with my enclosure. I have two rss390hf-15s in two mfw-15 subs powered by an inuke 6000 with dsp. They go below 20 with no problem.

@maafeustyle 2 года назад

Love the build! That's amazing. Looking to build a set of the cinema 6's. Any plans on making a build guide for this beast? It would be a beautiful paired set.

@chuckmaddison2924 Год назад

The one thing that worries be about powerful subwoofers Is the ceiling or similar light structures cracking. We do get some earthquakes occasionally. But if I called the insurance company and said I was watching Star Wars and the ceiling came down, they wouldn't pay.

@greenbassboosts8872 3 года назад

Hey, bro! GRS just released the 12sw-4HE a little while ago. It feature more Xmax, stronger cone of paper, 250W RMS rating, and from winisd it looks like it can did into the 20s no problem in about a 3.5 cube box tuned lower 20s! Super cool budget upgrade in the GRS lineup

@greenbassboosts8872 3 года назад

Cool video as always though

@spazz954 3 года назад

Damn... Now I know what to do with this old SVS ultra 13 amp. Now just need to find someone to build the box. Lol

@fat_dubs 7 месяцев назад

Hello! Do you think a couple of these plus a couple of your "Cinema 6" on top would make a nice combo for a hi-fi loudspeaker for small events?

@cazschiller 2 года назад

Media offline screen at 3:15... Love your content but you need a video editor to give it a once over at the end. Looks like you use final cut. Happy to help 🙂

@JoshM7 3 года назад

Interesting my Ultimax 12 box is bigger than this enclosure. But I went for 5.4ft³ net tuned to 19Hz in my case. Also I see you painted to port black but missed the sides. (Or maybe that was the effect you were going for?) I painted (Sprayed) my ports after my box was assembled. Spraying into the port covered enough to never be visible unless you get on the floor and shine a light into the port. And you can never have enough clamps. :) (Though I like nailing as I like to zoom though building the enclosure... Which isn't always a good thing haha)

@Toid 2 года назад

Lol, no. I completely missed the sides. My bad.

@Pawel5837 Год назад

Hi, its a nice channel. How important is the distance of the driver from the vent? Wouldn't it be any better if the woofer was possibly furthest from vent? I'm thinking about delivering the less turbulent air to the vent and symmetry of air pressure behind the membrane. I imagine the air pressure would be a bit higher on the furthest side from the vent. Thanks in advance.👍

@Shueysstuff 9 месяцев назад

Wonder how that’s would go as and outdoor cinema sun??

@highflyingfalcon1380 2 года назад

It's great. But DIY with CNC machine?!

@robbiedh02 3 года назад

Hey are those my hands in the video? It was fun.

@Toid 3 года назад

It was fun! I might just end up having to build a second one

@snhongo1 2 года назад

Hie please can you do a video on how to calculate different box types using Hofmann's Iron law...wanna try it but i dont know how ....

@kabalah888 Год назад

Hello!!! do I need low pass crosover ? or plug it straight to the power amplifier?

@waynepollard6879 2 года назад

Didn't drill holes symmetrical which would drive me crazy ! What receiver do you have ?

@originalnickname1 3 года назад

I love this design. Would fluting the ports on the front of the enclosure cause any negative effects to the sound?

@Toid 3 года назад

I've never tried it, so I couldn't say for sure. It might mess with tuning frequency a little. The only concern would be that they would try to push a lot of air through the flutes that might affect Port noise. But I honestly couldn't say for sure.

@felipenachmanowicz9393 Год назад

Nice! Any feasible way to make it an active subwoofer?

@garavonhoiwkenzoiber 2 года назад

8:29 !Media Offline! heh, missing scene?

@Ab20222 2 года назад

Are you familiar with the tunable feature of the Decware Deathbox sub and Pro-12 Loudspeaker designs?

@justins.1283 3 года назад

I still think you should talk to parts Express and get them to send you one of the 21 inch krakens I think that would be literally structural murder to put that behind the couch in your home theater

@Toid 3 года назад

You're probably right. 🤣😂

@philtidona2769 Год назад

Can you explain how you wired the woofer to achieve 20hz

@25hztolife14 2 года назад

Had a question about the sub that Justin couldn't answer. Would the box benefit from a Passive radiator? And have you tried to put the orange box in a car and test it. I'm trying to figure out what sub I want (12, 15, or 18; at 1 or 2 each), and what sub to use.

@Toid 2 года назад

I don't see a benefit with the passive radiator with this setup. Sure it would cut down on port length (aka box size) but you also would have the added expense of probably adding at least two passive radiators. And at that size, that's not only going to be expensive, but take up just as much if not more room. But no I've never tried it in a car, so I can't speak to that. However I do think it would work well in the car.

@darinb.3273 3 года назад

Who says a sub needs to be a dinky tiny little thing? Make it big, heavy and healthy, she won't be scoochin' across the floor.

@georgemartinezza Год назад

*Do It Yourself* with or without tools

@glengatt3941 2 года назад

Nice,the others subs one of them looks 15 inch does it go 20hz, the orange one is to large for me

@6LordMortus9 2 года назад

Where can someone starting out find good resources for building speakers?

@pierrecastanets1974 3 года назад

Show some REW graphs!

@Toid 3 года назад

I use the Omnimic. But a measuring a subwoofer in room is going to tell you a whole lot more about the room than it is the subwoofer. Your welcome to check out the unaltered thoughts in the subwoofer shootout video linked in the description.

@pierrecastanets1974 3 года назад

@@Toid I agree with you but IMO it’s good to see the FR. A close mic sweep is better than nothing. Show off your efforts a little bit more! Please don’t take my comments negatively. Great work and I appreciate the build thread.

@Toid 3 года назад

@@pierrecastanets1974 I appreciate that. I'll keep that in mind next time I do a subwoofer build for you guys.

@daltonpennington8147 2 года назад

Can you explain the science of splitting the ports up? I've never heard of it. The principle is that how ever many ports you divide it into, you divide the length by the same number? If I had a port that was 5x5 and 25 inches long, I could make 5 ports thay were 5x1, only 5 inches long?

@Toid 2 года назад

There’s no difference in tuning frequency. The main reason it is done here is to add structural rigidity. In your case you would be changing the tuning frequency because the length would have to stay the same so you would want five 1 inch ports that were 25 inches long.

@jorgealonsorojasulloa7612 2 года назад

y el croosver??? o no necesita??

@Lou_Zasil Год назад

dont see the plans for this on your site? anyone got the link?

@desasch1687 Год назад

I am thinking about building two of these with the UM15-22 Subwoofer. But I want to build it ported and not as with one of the available sealed boxes. Do you have drawings available of the box you build or any recomendation, where to find something like this? It will be the first Sub I build and if I would design a box myself it would be awefull, since I don't know how to calculate anything for it.

@Campbell1. 2 года назад

Great vid. What is the intro music called please..

@ajacksona 2 года назад

Are the build plans available?

@Mentalfirmware 6 месяцев назад

Plans link is 404. Are these plans still available?

@solitaire5142 3 года назад

Your driving the 2002 into clipping, turn it down or get a bigger amp:)

@Toid 3 года назад

Yeah, I really need an art clean box Pro. I did put a limiter on to prevent that though

@vdfritzz 2 года назад

is tghat how port lenghts work? in winISD wheni put more ports, the length needs to be even longer

@patswazent 2 года назад

Hi, would this woofer works good in a 3 way floor standing speaker ? what is the volume and tuned F of your box, thanks !

@toolanddie9789 3 года назад

Maybe I missed it. How tall was your slot ports?

@johnsmith-qz4bv 2 года назад

these subs should take 450 watts all day right..?...awesome build..

@Toid 2 года назад

Yes. I'm giving this 800w

@OldfarseeingArt 3 года назад

I can't help but wonder...Did the measured specs on the MX15-22 match what Parts express states on their website? I have no doubt that you did measure that.

@Toid 3 года назад

I only measured the TS specs before I built the box. Once I built it I measured the in room response and EQ'd to that. The final response with EQ was exactly what I wanted and what I expected based off WinISD.

@felixbejasa7724 2 года назад

Boss how much 15 inches l box lang marine flywood

@S1lentJoy 2 года назад

Do you have plans? I cannot find them

@vijaykumar-np8qq 3 года назад

Paint type is a oil imelsion or water soluble paint

@ForwardEngineering 2 года назад

What CNC table is this ? Did you build it?

@vikassm 3 года назад

Fantastic sub, awesome video! 👍😀 Really annoying background music 😭

@Toid 3 года назад

I appreciate it! Thanks for the constructive criticism. What type of music do you prefer?

@vikassm 3 года назад

@@Toid Love your projects, but background music takes the focus away from your insightful commentary! I understand the effort it takes to make just one of these videos, let alone put them up regularly with GREAT content & awesome production values. I just like to hear the sounds of tools and woodworking when you're not talking. My listening hours are split almost equally between movies and heavy metal, but I do enjoy all kinds of music: eastern & western, from classical to country to Melo-Death.

@iargueta1220 Год назад

That’s a pretty small box for a 15 at 20Hz. Did you get any port noise? I would think that his would be noisy, no way is that port big enough unless you are under powering it it greatly. How watts of power did you apply to this? Looks real good and that sub has ridiculous cone area!

@Toid Год назад

It was designed properly using WinISD with power and port noise taken into account within the design process. No port noise. It’s just a very clean sounding subwoofer. I recently replaced it with my dual 21” sealed subwoofers. But this is going into my game room. I’m

@iargueta1220 Год назад

@@Toid heck yeah! Looks like a project for my movie room 👍🏼

@HarithAhmadDaud 2 года назад

Hey man, this is a 2 ohm per coil DVC driver right. Wired them in series yields 4-ohm. How did you decide to use driver with lower than 6-ohm impedance to match with your amp? Is additional resistor needed? I was under the impression that home theater amp usually requires 6-ohm or more. Is it because this is an active subwoofer with dedicated plate amp? Newb here 😁😅

@Toid 2 года назад

Most Home Theater Subwoofer amplifiers handle a 4ohm load. So there is no worry there.

@toolanddie9789 3 года назад

Will there be plans available for this on your site?

@rickjk80 2 года назад

How can I get plans

@thedood3604 2 года назад

No way he actually put the Ford vs Ferrari movie in the description😂

@toolanddie9789 3 года назад

This things a beast! Will you be posting a cutlist or selling one?

@Toid 3 года назад

I will have a cut list coming out hopefully by the end of the week. I'm contemplating on whether to sell the flat pack. I have to check to see how much shipping would be on something like that.

@toolanddie9789 3 года назад

@@Toid if it's like gsg, shipping is alot.

@Toid 3 года назад

@@toolanddie9789 yeah it is. So is material right now

@toolanddie9789 3 года назад

@@Toid hopefully things will come back to normal eventually. A cut list will be much appreciated. I may send my 12-in ultimax back and get the MaxX15 and build it then.

@spazz954 3 года назад

Any update on selling the flat pack?

@erikbritz8095 2 года назад

Hi toids so i have a Sundown X15 home audio setup and i am looking to boost some output via new box designs BUT i have realized that Basic L Port enclosures seem to be the norm with Home audio so i want to ask is it worth it or not to build a 4th order for my sundown cause if not i will stick to my box i have now especially seeing as i can play down to 8hz up to 60hz+ easy at crazy volumes.

@Dawood4 3 года назад

Where do I get the plans for the box?

@boomerps2 3 года назад

Where can I find the cnc plans for that enclosure?

@JoelHernandez-tz3vk 3 года назад

Would an enclosure within an enclosure be an effective way of reducing enclosure sound.

@Toid 3 года назад

Some people will do this with a constrained dampening layer. Basically it's going to be all the way around the enclosure with a dampening material constrained between them. You can take a look at it, it is an effective method.

@johnsmith-qz4bv 2 года назад

do you have the cut list ..?..

@matk22 2 года назад

What are you powering it with?

@Toid 2 года назад

I was using a crown xti, but currently am using a Dayton with Auto DSP that I reviewed a few months ago

@matk22 2 года назад

@@Toid thanks

@rafalogrodnik3855 2 года назад

I'm trying to DIY 33" box for sub. Can you help me?B2 Audio 33" (X26) Xtreme Subwoofer

@Franciscorsilvaaa 2 года назад

Does any1 know where to buy rubber for a 18" woofer from kenwood its becouse i have some 90s 5way from kenwood and i would like to fix them

@johnsmith-qz4bv 3 года назад

where can i get the build list.?..

@anglerandy5736 3 года назад

I have the Max x 12", if I wanted to clone this box what dimensions would you recommend?

@Toid 3 года назад

I'm not sure, I haven't done anything with the 12". But you could ask on the forum www.toidsdiyaudio.com/community

@alexandergilbert6490 3 года назад

Hi I have a question when can you show us or make a Subwoofer that come go down to like 10 or 15 hz please I really want something better then better

@Toid 3 года назад

This one will hit that no problem in a room. 15 Hertz is probably close to us F3 in room. If you really want to chase those single digits though you're going to want to do a lot of subwoofers and sealed with a lot of EQ. The main issue you're going to have is that pretty much any amplifier that's going to be pushing these bigger subwoofers is going to have a 20 HZ high pass on it. So you're going to have to at least EQ that out without passing excursion of the subwoofer.

@alexandergilbert6490 3 года назад

@@Toid couldn’t you use something like a car amplifier and a mini dsp I do know that there are some car amplifier that go down to 4 hz and yer like the Arc se amps and I think Orion HCCA 250 go’s down to like 15 hz I all so know they made some home amps back in the day that did that too