This Bolt is Broken... I Make a New One! Machining Left-Hand Thread

Подписаться 535 тыс.

Просмотров 566 тыс.

50% 1

In this video I'm making a custom bolt with a thread on each end. One of the thread is a regular M16 thread and the other one is a left-hand M16 thread. In the center there's a 24mm hexagon. This part is used to adjust the distance between two parts which are used for a foot pedal on a machine. As both threads are pretty big to cut with dies I decided to turn them on the lathe. I was lucky that I was able to loan both thread gauge rings from a local company. This made the thread turning to the correct size a lot easier. For rust protection I decided to do hot bluing on the bolt. On the two blue parts I only had to recut the threads.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:
Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Carsten Bauer
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Anthony Eufemio
Bendurion
Br. Michael-Francis Smith, OSB
Chris walter
David Barker
Greenstitute
Haitham Al Zir
HouziMoto
Josh Ledford
Josh Wasserman
Joshua Bentley
Lambda GPU Workstations
Leo
Louie Carboni
Marius Costan
Matt Boothman
Mellissa Marcus
Monte Gibbs
Nick Houston
NoLoneSurvivor
Paul Mampilly
Pong Lenis
potokslow
SaoodAlrabah
StevenVR
Tyler Autry
Tyler Carruth
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Ajna
Alex Breton
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Egerton
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
brad ashmore
Brian Hoerl
Chad Bryant
Chris Bretano
chris roberts
Chris Simondet
Crystal Cash
Daniel Varga
Dave Hardware
Diriector_Doc
Embiss
Ethereals
flowercrownbouncer
Frankie DeSantis
Geoffroy
Grant Daniel
Grok Senften
Haley McFadden
Hunter R.
Ivan
Jack Curry
Jack Scott
Jason Koi
Jeremy Cole
justin f.
Karl R
Kelly Imgrund
Ken Rosso
Kurt Gazow
Landon Burgener
Marc Cerisier
Max Bourbon
Mellissa McConnell
Michael Lamp
Mike Donaldson
Noah Schwarz
Omar Domínguez
Pasacal Schmikal
Ray Yeager
Regis Vincent
Rev. Gina Pond
Robert Todd
Scott Marshall
Sergei Shvartsman
Subramaniam Venkitaraman
Suiros
Svenja Kuckla
Tim Holt
Trevor Kam
Tucker Ifft
웅록 윤
My camera:
Panasonic HC-VX11
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
• Building a Huge Rotary...
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Main Channel:
/ mymechanics
My Second Channel:
/ @mymechanicsinsights
My Patreon Page:
/ mymechanics

Опубликовано:

19 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 931

@nospin1394 2 года назад

Unfortunate your lathe bearing is near its end but you know it would make an interesting episode to replace…yes?

@mymechanicsinsights 2 года назад

Indeed, but I think I probably won't. It works fine for normal use, so far ;-)

@rnp497 2 года назад

next restoration video - your lathe

@Eriiaa 2 года назад

My lathe is broken - I make a new one

@rexaitken 2 года назад

@@mymechanicsinsights my method to deal with chatter on form cuts is to take the final pass turning the spindle by hand and feeding in tiny amounts. Works brilliantly. What lathe do you have? I'm not really surprised it chattered on a form cut like that in steel, don't worry about spindle bearings!

@chrisstephens6673 2 года назад

If the lathe is old there is probably a good chance that the bearings are adjustable. If not bearings, it could be the chuck jaws are bell mouthed and need recutting.

@kjamison5951 2 года назад

YT: “My Mechanics Insights has released their latest video.” Me: “I watch a new one!”

@mymechanicsinsights 2 года назад

I hope you like it

@fizmat2009 2 года назад

Lol

@FriedHam 2 года назад

* After wathcing the latest video * Me: I watch old ones again!

@mahina1963 2 года назад

I love it when you write..."I make one"! They look like jewels. Mechanical jewels.

@HansSiemons 2 года назад

Wonderful to see such a wonderfull long video on a "single part", and see all the details that go into making it!

@mymechanicsinsights 2 года назад

Thanks Hans, I'm glad you like it. A real insights video ;-)

@smashyrashy 2 года назад

As a machinist i know and appreciate the work that goes in to every part that he "makes a new one"

@theodaniels7273 2 года назад

The only man with an M16 left handed thread Guage ring

@ermannopinotti9922 2 года назад

Actually there aren't left-handed M16 gauge rings for sale in the whole world. He made a new one.

@merlinch4256 2 года назад

No, he says he borrowed it from a local company :-)

@jonmcs 2 года назад

@@ermannopinotti9922 Have one at my work... 😌

@DrLoverLover 2 года назад

Woosh

@ArniVidar 2 года назад

Thanks for giving us some of that real-time view. And thanks for not making us watch all of it in real-time! :D

@mymechanicsinsights 2 года назад

Yeah haha. It's a real shame that this lathe doesn't has a spindle brake. It takes ages for one pass with those slow rpm's.

@PointlessMiracle 2 года назад

Next video: making a spindle brake for my lathe

@anqied 2 года назад

@@mymechanicsinsights couldn't you have done it faster on the left hand thread, since you didn't have to worry about running into the hex?

@mymechanicsinsights 2 года назад

@@anqied when i run backwards i have the same problem

@mymechanicsinsights 2 года назад

@@PointlessMiracle thought about that already

@ArKritz84 2 года назад

"Lathe is old and chatty. I am neither. I make a new one!"

@Slimboy025 2 года назад

It will be hard making a lathe on a lathe xD

@anantsaiasthana2643 2 года назад

et voilà!

@jackcheefer 2 года назад

making a new lathe with a defective lathe? I'm wondering how he does...

@michaelbodo2022 2 года назад

@@jackcheefer every new machine is build on an „old one“, absolute no prob… 💪🏻

@arty7122 2 года назад

@@jackcheefer it would probably be possible, even tho really expensive and kinda impractical to make your own lathe.

@karthiarangath6163 2 года назад

Hiii my mechanic. I'm from India, Kerala

@mykeg2401 2 года назад

Love the behind the scenes look at “I make a new one” process very cool.

@Zimiorg 2 года назад

"Babe, come to bed

@wahyuiskandariah6807 2 года назад

that's a good one... 😂😂😂

@obijuan232 2 года назад

You made my day. LOL!

@sergioguerra1246 2 года назад

Are you still alive? :):):)

@expatmoose 2 года назад

@@sergioguerra1246 now that’s the ultimate question

@dangerous8333 2 года назад

Damn bro, you tell your girl to STFU? You'll be alone soon.

@alanpreston3111 10 месяцев назад

As a person who knows nothing about engineering, that was amazing , thanks 🙏🏻

@joemahma9069 2 года назад

I just know THIS kind of craftsmanship is gonna' get me into Divorce Court! This gentleman's skill has inspired me to buy that lathe I've been fanaticizing about for eons! Thanks a LOT, sir!

@theeagle8652 2 года назад

This guy is so skilled it's almost offensive 😄

@brendanstempski8292 2 года назад

I was offended. Time to tweet about it

@theeagle8652 2 года назад

@@brendanstempski8292 rock on dude 😁👍

@AtlasReburdened 2 года назад

**Clickspring:* Has joined the chat.

@thilo_117 Год назад

by the way, not only your craftsmanship is on another level but also your video-editing skills are awesome

@bevomcbevenstein 2 года назад

I could watch machine work for hours.

@SarvagyaB 2 года назад

You are the best! My wife and I celebrate your videos.

@ohorlando1187 2 года назад

It’s a good day when a vid like this one drops. We are in danger of losing such skills in the future. Love the content.

@Slasho58 2 года назад

This is the first time I see a sketch well done, as a teacher this makes me happy

@Erastus_Ralte 2 года назад

Whatever you do your fastidiousness and painstaking make your work perfect and interesting. I like your work so much

@yalebaker7976 2 года назад

Amazing that a 60 year old lathe is still that accurate. Weiler should be proud. Everything you do is a work of art and this turnbuckle bolt is no exception. It’s beautiful!

@Aleksander_Grigorjev 2 года назад

Greetings from St. Petersburg! You said: "I hope you like my work and the video." You don't have to hope, you MUST KNOW that your work evokes the most positive emotions in normal people. Your videos can help normalize blood pressure and reduce fatigue and aggressiveness. And whoever does not agree with this - let him go to hell.

@andrepaio7751 2 года назад

Fully agree. Greetings from South America.

@nendongosimeonn6375 2 года назад

He hoped because there is 8 people who thumb down this clip. So he's right to hope.

@Aleksander_Grigorjev 2 года назад

@@nendongosimeonn6375Sick people (8 units). What to take from them, except for tests, and even then bad ones.

@Aleksander_Grigorjev 2 года назад

@@andrepaio7751 Hi, Andre!

@jreese8284 2 года назад

Oh, St. Petersburg, I'm laughing here in Wisconsin!

@misterpatina 2 года назад

12 minutes and 54 seconds of pure satisfaction!

@lukasrgl 2 года назад

Gut, dass wir CNC Maschinen haben, aber konventionell Fräsen und Drehen ist einfach das beste! Ich liebe es :)

@garygenerous8982 2 года назад

Next up on MyMechanics: MyMechanics lathe is getting worn out, watch him make a new one with not one 90 degree corner anywhere in sight and so shiny that it must be kept in a Vandablack room at all times else it blind the entire population of Switzerland and rase global temperatures by 5C. This whole process will take 6 hours and be condensed down to a single 30 minute video astonishing all and making all other RU-vidrs gnash their teeth with jealousy.

@rewlazman 2 года назад

Can't wait till you make a new lathe. Seriously though, watching you make a bolt is better and more entertaining than most of the videos on RU-vid. 👍

@nathanbinns6345 2 года назад

By the way, since you said your lathe is getting old, do you think you could get a sponsorship for a shiny new lathe on your main channel? You've got almost 2.5 million subs now so maybe it is possible, certainly you wouldn't be the first engineering channel on youtube to get given extremely expensive shiny new tools by sponsors.

@mymechanicsinsights 2 года назад

That would be amazing

@rexaitken 2 года назад

Unless you have a lott of Money, new lathes don't compare to the quality of old ones

@ThePanickedMonk 2 года назад

Or at least maybe something from Scotch Brite :)

@michaelbodo2022 2 года назад

@@mymechanicsinsights hopefully this is not a realistic option for you, please do not replace it with a new one. This old machines have a heart and worth to earn the love and maintenance they need to keep on going ❤️

@arty7122 2 года назад

@@rexaitken exactly, the new ones are usually crap, and if they aren't the price tag would give you a heart attack

@deburgemeestervanhespedam3314 2 года назад

Applause for the artist!!!👌👌👌👌👌

@gichiguy007 2 года назад

LOL'ed at the Patrons name Pong Lenis.... True Gold.

@rdjess 2 года назад

I’ve been following your main channel since ~10k subscribers, and your content still continues to amaze me. Perfection!

@mymechanicsinsights 2 года назад

Nice to hear that, thanks a lot

@thomastallis8819 2 года назад

The Mozartean clarity of this creation belies its stunning beauty. This is pragmatic art of the highest level. No moving parts -- and yet, for me, this special bolt is a minor masterpiece. Bravo!

@elizabethturner2421 2 года назад

Until you wrote it, I had been searching for the right adjective to describe MM's work. Mozartean it is! Thank you for putting your finger on the right word--and for writing such an elegant description.

@gustavogarcia3515 Год назад

Absolutely.

@carnacthemagnificent2498 2 года назад

My dad was an enginner in the cold war days working on cutting edge defense stuff. He tells a story of the best mechanical engineer he ever worked with going on a boating trip in the Caribbean and his engine failing. He collected some broken parts and headed into town, found a machine shop, and took it over to make his own replacement parts. Problem solved. I'd love to be able to show him this channel and say "is this they guy?" :-)

@ptizim 2 года назад

Would you have thought, only a few times ago, that filming yourself machining a screw on a lathe could achieve 100,000 views in 1 day? I will be curious to know how many people who are not at all from the industrial sector you have been able to attract there thanks to your high quality restorations ... especially nowadays in this world where everything is only computer, digital, virtual, easy, fast... It is a pleasure to see you mastering the techniques of drawing (respect for the thread symbol), machining, dimensional control (a no-go threaded gauge? no need, thanks ;) For your lathe, a French proverb says: "it is in old pots that we make the best soups": keep it as much as possible! If we weren't so far away, I would give you with pleasure some nice pieces to restore that I haven't seen on video yet. Cordiales salutations my friend and long live to the famous Swiss precision!

@TamiyaPhilippW 2 года назад

Is there a video of you explain your "story"? How it all started, what you did for living earlier/did you learn this stuff or did you teach it by yourself? Your skill range is just crazy !

@treyjohnson6169 2 года назад

Can’t wait to see the new video on the insights channel. Opening line my lathe is broken, “I make a new one.” Love seeing the whole process in making something that most people wouldn’t think a second thought about. 👍👍👍

@beatsntoons 2 года назад

Lathe restoration video, please :) It's 1251am here and I'm watching someone make a bolt. BUT I'M LOVING IT

@petevanderley4705 2 года назад

What a great video. I was about to close my laptop and noticed your video. Good reason to relax and enjoy for 13 minutes. Perfect end of the day for me here in Malaysia

@tracybowling97 2 года назад

I never knew watching a bolt being made could be so fun. This was a great episode!

@nathanbinns6345 2 года назад

I feel like this is the first time I've seen you do something that you would actually do in your regular day-job as a machinist, remaking custom parts for machines that need them (I'm guessing you don't repair a lot of coffee grinders at work...or hey actually maybe you do, I honestly don't know a whole lot about machining)

@MrMadreko 2 года назад

I think this bolt looks better than the one your friend had in original. And will last for sure longer. Thumbs up. 👏👏👍

@pfadiva 2 года назад

Your hot bluing is always lovely. It looks better than anyone else's that I watch.

@jonathanfox1 2 года назад

I hit 'like' the moment you started sketching. So great to see the whole process! Well done that man.

@fredschaves 2 года назад

Awesome video! Would love to see more of these indepth "I make a new one" regarding specific parts!!

@ovidiu2127 2 года назад

good job

@CraigWinsr 2 года назад

If only I had the skill set like you,, I admire your work!!

@RoelfvanderMerwe 2 года назад

My favorite 5 words in the world! "I make a new one"!!!

@freirecristiane 2 года назад

Hi Mr. Mechanics! I really appreciate that you made this video showing your "method", from sketch to final test. In a complete restoration video you make is seems so quick and easy, and I think it's one of the things that amazes me. And a 60yo lathe? Wow! Have you ever showed it and the whole workshop? I've really like to see it. This video proofs how very much talented you are. Kudos from your big fan from Brazil 💜

@carolbuzelim 2 года назад

Make threads is one the coolers things to do, i have a lot of fun

@jochenstacker7448 2 года назад

This simple bolt once again shows that really great engineering is indistinguishable from art.

@warbirdwf 2 года назад

The best part for me of your restoration video's is when you use the lathe and milling machine. You should do more videos of just making parts on them. It would also be interesting to know what metal you're using when you make a part. Example, are you using 4140 steel? You really do beautiful work, especially on that 60 YO lathe.

@govin._.d 2 года назад

It's really heartwarming and oddly satisfying ❣️😊

@Mr11mrdk 2 года назад

I love the way you restore tools . Time to work on yours. You take care of tools - that'll take care of you .

@hladik2142 2 года назад

For a 60 year old lathe, that thing does some great work...

@TysyTube 2 года назад

🔥🔥🔥

@KazK-vi6xn 2 года назад

hi mr tysy i love ur videos

@pierresalve 2 года назад

la démonstration à la fin est bluffante! terribles vidéos aussi TysyTube!

@AdmiralFace 2 года назад

Why do you paint rust/dirt in your videos? I can not watch, it makes my face pucker.

@FOG2006 2 года назад

Will the next restoration project be your 60-year old lathe? This would be a nice saga.

@victoriagooner9907 2 года назад

Time to make a video of you replacing the lathe spindle bearings... Great work.

@vinceianni4026 2 года назад

Hello my mechanics very pleasant to watch the video beautiful job well done my friend

@YamahaYZFR6RJ05 2 года назад

A new video. Today is going to be a good day.

@therealdojj 2 года назад

Always wondered how you cut threads on a lathe, can you do a video explaining the system please? Thanks 👍

@YohanesAriez 2 года назад

Your videos is a benchmark to me for a "restoration video".

@zrodger2296 2 года назад

A nice and unexpected balm for a Tuesday morning. Thank you!

@FreezinFury 2 года назад

To stop chatter PLACE A BIT of wood above the work piece on the outside dia. But if you have already chatter remove it by stopping the spindle and dig into the chatter manually by rotating the spindle a few turns by hand .

@StuPedassol 2 года назад

Dammit, I thought you just eyeballed everything. 😄

@mymechanicsinsights 2 года назад

lol

@roylayao8136 2 года назад

From restoration to i make new one.. my mechanic is the best

@mikeedwards8518 2 года назад

Brings back great memories

@rasmis 2 года назад

Lathe doesn't work. I make a new one.

@mymechanicsinsights 2 года назад

Yeah too bad. I've had a similar issue before when parting off tough steel. It doesn't really like those big radial cutting forces.

@nit-Inundate 2 года назад

Should you be quenching in a glass container? Wouldn't the temperatures break the glass?

@Tombsar 2 года назад

I worried about that. Maybe it's borosilicate glass? Very resistant to thermal stress.

@mymechanicsinsights 2 года назад

Well, you saw that it didn't break ;-) It's just normal glass

@Deweyfd13 2 года назад

The amount of oil is enough that the temperature of the part will dissipate all its heat energy long before the glass can get any significant amount of heat applied to it. No risk of it breaking with what he is doing.

@AcmeRestorations 2 года назад

He's only heating it to like 600F to turn it black. Which doesn't require quenching at all. To harden steel you have to get up to 1400F and then quench it fast. And when you quench hardened steel, you need a LOT more oil than he is using. This is only for show. All he did was make the part oily. Beautiful machining, but this part is just nonsense.

@Vickie-Bligh 2 года назад

@@AcmeRestorations You need oil to make the bluing stick. Otherwise it will peel off.

@toniatalley1977 Год назад

I absolutely love your channel. You are so so skilled at what you do. I love to watch you work

@malenapinkham4147 2 года назад

The compressed air clearing away all the shavings has become my new favorite thing in these videos🤩

@ducksauz 2 года назад

Very nice remake. Curious... Did you make the thread gauge rings or were those shop bought? They look like they'd make a nice practice project for turning threads and knurling.

@mymechanicsinsights 2 года назад

The gauge rings are borrowed from a local machining company. They are super accurate, hardened and its thread is surface grinded.

@Hoodalump 2 года назад

@@mymechanicsinsights AKA super expensive.

@DolezalPetr 2 года назад

You cant really make a thread gauge with just a lathe....

@Tombsar 2 года назад

@@mymechanicsinsights I can't figure out how you would surface grind an internal thread like that... Any insight?

@passthrujr5 2 года назад

@@Tombsar you don’t. We make them at work all the time. Rough turned in annealed material, then hard turned after heat treat to spec. There’s no reason to grind a thread gauge for average tolerance threads. There’s some super special grinding equipment for doing very tight tolerance gauges but it’s definitely not a surface grinder…. They are mostly CNC tool and gauge grinders made for that specific purpose. But yes. You can absolutely make standard gauges on a lathe, even a clapped out manual lathe if you know what you’re doing.

@plunder1956 2 года назад

I'm surprised that you already had an M16 left hand thread guage in your equipment drawer. Lovely job. What steel did you use for this part? What was the broken system for? It looks agricultural.

@mymechanicsinsights 2 года назад

I borrowed the gauges from a local company. I used ETG100. It was some kind of a press or metal shear.

@plunder1956 2 года назад

@@mymechanicsinsights i wish I had access to a small set, so useful.

@BigSkyCurmudgeon 2 года назад

a set of thread gage wires would be just as good to get perfect size threads. it isn't rocket science

@budaniamanish5177 2 года назад

First i watched this video on Facebook now watching again on RU-vid. Your work is so satisfying dude😍

@keredrellit3992 2 года назад

a friend hands you a broken bolt you give him a work of art back! gorgeously done!

@MrLeroyFox 2 года назад

I like your clean hands. People who do such amazing things usually have black dirty hands.

@kuplung22 2 года назад

Nothing wrong with dirty working hands.

@dangerous8333 2 года назад

Lmao... Yeah, cause most of us are focused on getting work done and not keeping our hands clean for a RU-vid video... Good grief.

@mymechanicsinsights 2 года назад

lol, absolutely true. mine are dirty off camera too

@AabluedragonAH 2 года назад

@@mymechanicsinsights someone appreciates the lengths you go through to have clean hands during a video haha

@swebigmac100 2 года назад

It must be a good friend with all this work. What's her name?

@mymechanicsinsights 2 года назад

🤣 lol

@jobkneppers 2 года назад

Using a form tool with a big radius is always prone to chatter. Reduce the stick out length as much as possible and use the lowest spindle speed available and lubricate well using e.g. Motorex cutting oil. If this doesn't do the trick remove the final chips by rotating the chuck by hand using the chuck key as a drive dog. This is how I do it and end up with good results most of the time. The condition of your spindle bearings (and quality/rigidity of the lathe to begin with) is of course really important. Maintenance could be complicated depending on the construction of your lathe and the availability (and price) of replacement bearings. But if the machine is worth it, and you proceed, you will regret you didn't do it earlier. It will put a smile on your face! Thank you for sharing! Best, Job

@rickmoore 2 года назад

I really appreciate the extra commentary on why and how you are doing each step, very informative Thanks

@BrooksMoses 2 года назад

Me, watching you checking the M16 right-hand thread with a standard gauge ring: Ah, indeed, but how will you check the left-hand thread? It's not like you'd have a left-hand one just lying around. Me, watching you checking the M16 left-hand thread: Oh. Well, that was silly of me to think that! (Me later: I suppose I should have read the full description!)

@mymechanicsinsights 2 года назад

;-)

@Sanek1strelok 2 года назад

Я бы сказал, что деталь излишне качественна для данной стяжки)

@gilah6565 2 года назад

Нет предела совершенству

@Sanek1strelok 2 года назад

@@gilah6565 👍

@htscooter 2 года назад

Делай лучше, хуже само получится

@fainderskurs-koi8767 2 года назад

ну эт ты загнул, про излишнее. Резать без подпора, М16 при шейке в Ф13, та ну на. да и калибр, Пр, болтается шо го вно в ополонке. Ты если точишь, то бери гайку. или не понтуйся с одним кольцом. Давай Пр. Не Пр.

@BigO4185 2 года назад

Very nice work with and old lathe. As an engineer I enjoyed watching a great job!

@AgentMattox 2 года назад

This might be a little presumptuous of me, but in my opinion you are the most skilled person at this of anyone I have seen. I can't get enough of your videos. You have such care for your art.

@ChadWSmith 2 года назад

Are we going to get to watch you restore the 60 year old Lathe?

@KristofferEngdahl 2 года назад

Yes please!

@danielramsey1959 2 года назад

I would have just welded the heads of a lh and rh pair of bolts together.

@irishwristwatch2487 2 года назад

"I bodge a new one" lmao, i'd have probably done the same in the intrest of time

@cr1tx 2 года назад

But it wouldn't be as interesting to watch :D

@Traboukos 2 года назад

You just destroyed the video man!😂😂😂

@brandynpetersen8017 2 года назад

It sucks to have to work on everything you own before you can use it, because it was "fixed" the "save time and money way". Like my dad does. It neither saves time or money.

@I_SuperHiro_I 2 года назад

Those are beautiful thread gauge rings 😃

@collinwelch757 10 месяцев назад

Fantastic video, much of what is demonstrated here is used almost daily in the hydraulic repair shop that I work in.

@xTheZapper 2 года назад

If someone like Abomb or This Old Tony was making that they'd probably use a 4 jaw chuck, it always seemed like a massive pain to me but apparently the reason being that 3 jaws don't always centre properly, so when you flip the piece over the two ends might not perfectly align. This obviously seemed to come out fine, but would you use a 4 jaw if tolerances were really tight?

@mymechanicsinsights 2 года назад

3 jaws are running true in around 0.3mm max. But you can always center it perfectly with a few light hits with the nylon hammer and dial indicator. I think the 4 jaw is an american thing. I have never seen anyone in real life clamping a normal round part in a four jaw, only on youtube.

@xTheZapper 2 года назад

@@mymechanicsinsights Interesting, thanks!

@timrankin8737 2 года назад

My dad made me learn on a 4 jaw chuck. What a pain in the azz. Yes i am in america. If dad was still alive i know he would love this channel.

@electronicengineer 2 года назад

You sir are an absolute Master of your craft. I have nothing but the utmost respect for you and your skills. Thank you so very much for sharing your expertise with all of us on RU-vid. It always makes me happy to watch you work your "magic". Fred

@Frost640 2 года назад

If you want to eliminate/reduce chatter, use a chain or spring wrapped around the work piece. We do this in automotive when we resurface brake rotors, my shop has a 50+ year old brake lathe that has the same principles as a regular lathe.

@justinrochefort8369 2 года назад

I can watch all day making new ones!

@andrewturnbull5897 2 года назад

Stunningly beautiful bolt! Lucky friend!

@sureshot311 2 года назад

I loved this video. Thank you for this deep dive. I welcome all videos you kindly make.

@mr_effff 2 года назад

I would love a video about your workshop cleaning routine - particularly how you collect all the metal shards!

@mymechanicsinsights 2 года назад

With a vacuum cleaner :-)

@mr_effff 2 года назад

@@mymechanicsinsights 😃

@robertbutler8004 2 года назад

We all should have you as our friend!!

@Vatharian 2 года назад

That's 'just a bolt'. Yet it took a skilled mechanic probably two hours to make. This is why I treat my tools, fasteners and machines with care and respect. And I like to think they respond in kind, and last longer and give me a chance before they break.

@yanbianchini 2 года назад

Always a pleasure to watch your videos, congratulations on the work. Greetings from Brazil

@joannaatkins822 2 года назад

Gorgeous, quality work as per usual! I am pleased that so many people appreciate your philosophy and attitudes. Simple machinery can be beautiful

@mymechanicsinsights 2 года назад

Thank you very much!

@romariov5415 2 года назад

These are ingenious restorations, I watcheall the videos, you just re-create masterpieces. It's nice to watch your work. Thanks for the cool videos, thumbs up, subscription, bell. I'm looking forward to new videos. Good job ...

@Tiger-dl1yn 2 года назад

Ce sont des compliments d'art mécanique

@generaldisarray 2 года назад

Outstanding work, as always. It's a pleasure to watch you work. I think your chatter issue is purely down to the fact that the HSS cutter is trying to cut on three faces at the same time, and is binding, as you move further into the work. If you had some relief, either on the work piece or the tool, or used a smaller round nose cutter to created the valley in multiple passes, it would eliminate the binding/chatter.

@mymechanicsinsights 2 года назад

It has relief on all sides, it was just too big and the lathe too much wear.