This insane 500$ Water Block allows 13900K Overclocking above 6 GHz

Подписаться 200 тыс.

Просмотров 364 тыс.

50% 1

More information about Hetzner Servers:
derbauer.hetzner.com/en
---------------------------------------------------------
Support me on Patreon:
/ der8auer
---------------------------------------------------------
Save 10% on your iFixit purchase: DER8AUER10
eustore.ifixit.com/der8auer
Pro Tech Toolkit: bit.ly/2JOFD8f
---------------------------------------------------------
Find my products at Caseking:
Delid Die Mate 2: bit.ly/2Rhv4y7
Delid Die Mate X: bit.ly/2EYLwwG
Skylake-X Direct Die Frame: bit.ly/2GW6yyC
9th Gen OC Frame: bit.ly/2UVSubi
Debug-LED: bit.ly/2QVUEt0
Pretested CPUs: bit.ly/2Aqhf6y
---------------------------------------------------------
My Equipment:
USB- Microscope*: amzn.to/2Vi4dky
My Camera*: amzn.to/2BN4h2O
(*Affiliate Links: If you buy something, I will get a part of the profit)
---------------------------------------------------------
Music / Credits:
Outro:
Dylan Sitts feat. HDBeenDope - For The Record (Dylan Sitts Remix)
---------------------------------------------------------
Paid content in this video:
- Hetzner Spot
Samples used in this video:
- 13900K, ASUS Z790 Board, Alphacool Liquid, G.Skill 6800C34 memory
---------------------------------------------------------
Timestamps:
0:00 Intro
2:51 Hetzner
3:36 Cryo Cooler: old vs new
6:04 Delta² cooler
6:47 Problems with compatability?
7:30 The cooler in detail
8:37 Test system & mounting the cooler
11:29 Booting the test system
12:16 Software problems
13:14 "Cryo Management System"
14:54 Hack the System...
15:42 Cryo Mode
17:02 13900K: Temperatures & Cinebench
19:18 Gaming Benchmarks
20:31 Benchmark results
21:57 Summary/Conclusion
24:43 Outro

Наука

Опубликовано:

28 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 807

@UNVIRUSLETALE Год назад

Love how the boxed cooler can become a pump if it believes in itself hard enough

@MD2389 Год назад

The Little Boxed Cooler That Could!

@kriswhite9324 Год назад

@@MD2389 Underrated comment!!

@owenbar5055 Год назад

Welcome to 2022. The fan identifies as a pump.

@born2rock4life Год назад

You dropped your crown, king

@cyko5950 Год назад

@@owenbar5055 I wish my GPU would identify as a 4090

@theElemDragon Год назад

I love how the shadow around the fan error window was HUGE.... like all the error windows were literally stacked on top of each other, casting a dark shadow on your desktop, which slowly lightened up as you closed more of them.

@evanward9739 Год назад

Its like your vision closing in when you pass out as the computer starts to die

@TheCustomFHD Год назад

And the amount of poligons on it explains why it runs so bad.

@GRAYgauss 2 месяца назад

No it doesn't. GPUs can handle tens of millions of triangles. The overhead for windows is the abstraction, it's not the 2 triangles it takes to make them that makes them slow, it's the program they represent being run thousands of times that is slow, and maybe the windows graphics API also struggles, but in terms of raw compute the amount of polygons in a fork bombed 2D desktop scenario does not explain the performance issues. @@TheCustomFHD

@nomisukeindustries Год назад

LOVE seeing those Arctic fans being used in any capacity. I have an 11-fan rig and every single one of them is a P12 PWM. Total cost was around $55 USD for all the fans and it is quiet and efficient as hell.

@sayacee5813 Год назад

agree, top tier performance, bargain price

@deezhutts Год назад

2 out of 5 of my P12s have this weird whining. So they aren’t perfect.

@holobolo1661 Год назад

@Kadd enjoyer noctua fans are 5x the price for 0.5% extra performance... you got scammed bruh

@bigpoppa1234 Год назад

I only recommend two fans. Arctic P for regular people, and Noctua Industrials for insane people who don't care if their fans are running at 2000 or 3000rpm and don't want RGB.

@dan8t669 Год назад

@@holobolo1661 you pay 5x the price? sounds like you got scammed

@Krataking98 Год назад

Would love to see this solution on the new am5 CPUs considering their interesting boost behaviour where it will basically continue boosting higher until it hits 95°C.

@Kellen6795 Год назад

Man if this could go on AMD, that would be awesome

@angelg3986 Год назад

Agree. But it is too expensive. Intel made their 13600k to boost until they pass 100°C to have +5°C more auto-overclock head room than AMD. So on low perf Air cooling, Intel will get hotter and faster.

@erkinalp Год назад

AMD CPUs still have a hard power cap. Once they hit that limit, they will not increase power further.

@richr161 Год назад

Still they have a power limit that they will throttle at.

@robihr Год назад

it is better to delid the amd cpu and go for direct die cooling. you would get much better results than going with this.

@stankbuddha Год назад

This man is wildin. He's a professional loophole/bypass finder 👍 Great video

@tedmoore86 Год назад

Seeing this cpu block reminds me of my old Prescott P4 Vapochill LS setup. Crazy how we're back to those temps again.

@771racing Год назад

This pushes me back to my Celeron 300A days, peltier and heatsink ripped from an electric cooler strapped to a slocketed 300A with dual ATX power supplies...

@killer01ws6 Год назад

I'm impressed with your ingenuity as always on how you approach and figure out solutions to challenges. This is pretty cool tech and nice to see how it can run, but I am much more impressed with your 13900k results with power limits, that is the route I will go now that you showed it.

@organtv12 Год назад

I was waiting so long for someone making a video about the new cryo. Finaly and thank you!

@DimitarAtanasov Год назад

Great video! Thank You! As of the problem of the CPU recognition, using Wireshark and sniffing USB (if not encrypted) a small C code can fake and inject the right CPU type. Unfortunately I dont have EK Tec on my hands yet to check it.

@orrygel Год назад

I have been wanting to see a video on this block for months and finally

@MultiNastyNate Год назад

Awesome video!

@k1ng0fhartford28 Год назад

beautiful video with lots of great information, im waiting on your updated 13900k software to make my purchase. waiting for the final software

@floodo1 Год назад

my man, always surprising me with something I’m interested in

@bigpoppa1234 Год назад

Thanks for that previous 13900k power limit video. I used it as a baseline to look at tweaking mine, I ended up sticking to 280w for a short PL2, and then down to 220w for PL1 if there's a sustained load, with a core clock offset of -0.040v. The 280w setting loses less than 4% performance but isn't hitting 100c any more, and the 220w setting is only about 8% less performance but practically halved power usage at load.

@videocardzrule354 Год назад

Tuning is key really. I recommend just finding the lowest voltage you can use while having the least amount of power consumption possible. I have my 13900KF OCed to 5.8Ghz P-Cores, 4.5 E-Cores, and 5.1Ghz cache, and DDR5 7600. My max power consumption in R23 is 260 watts peak after 30 minutes still scoring over 43,000. Let that sink in for a second. It’s crazy. Yes my chip is amazing for one. But still, the auto voltages are a bit heavy honestly. If I ram my CPU stock with auto voltages it’s like 311 watts in R23. It doesn’t make sense that I can overclock it with a fixed voltage and consume 50 less watts while Running faster. Leave it stock set a fixed V-Core and start knocking off voltage slowly bit by bit. I can squeeze out a full bore 13900K performance inside of about 220+ watts. No need to take away frequency at all.

@bigpoppa1234 Год назад

@@videocardzrule354 That's a huge result. This chip is insane, it can go down deep low power, stay in the mid-range, or with things like this video's cooler can get massive scores.

@maegnificant Год назад

@@videocardzrule354 what kind of crazy ram is this

@PDXCustomPCS Год назад

@@videocardzrule354 Curious what Voltage you run for 5.8ghz with the cache so high? Still tuning mine. But even 50x on cache is a no go with 5.8 all core and 4.5 E-core.

@migaragunawansha9710 Год назад

Watching this after watching Linus's review on TEC's from 3 years ago really speaks volumes on how fast technology improves. Also love your videos dude!

@McTroyd Год назад

I’m quite happy to watch you play with this hardware. It’s great to know what’s possible. For my part, even if I came up with the money for such a rig, I have no workloads to justify it. I expect the same is true for most of your viewers. That makes bleeding-edge video like this very worthwhile to watch.

@enlightendbel Год назад

There are no workloads that justify it. You're still only getting a couple 100 extra Mhz out of the CPU for a 500$ pricetag. If you need performance, that 500$ together with a slight toning down of the initial pricetag of a 13900, buys you extra hardware that provides direct performance without the cooling. Like a whole second system. With multithreading finally being a mainstream thing, practically every task can be split up among multiple systems. So when it comes to workhorse systems, this is never worth it. Even if you have this specific task where the time it takes to queue up a spread task takes longer than running it locally, your workflow either needs improvement or the few 100Mhz together with the 500$ pricetag isn't anywhere near a speedup enough to make much of a real difference. But not everything has to have a clear price/performance advantage, buying something just for having it is perfectly OK. And who knows, by people buying this, the usage of this kind of tech may seep into the general market improving performance across the board.

@arklight1670 Год назад

@@enlightendbel Plus the rest how much will the fans and rad cost. I would like to see what that can do with a 360mm rad.

@rawhide_kobayashi Год назад

modded fallout new vegas

@enlightendbel Год назад

@@rawhide_kobayashi That'll never run long enough without crashing to need this kind of cooling.

@rawhide_kobayashi Год назад

@@enlightendbel you are wrong, sir. fallout new vegas, in 2022, with applied care and curation, is a rock-solid experience more stable than your average AAA release. the only problem is that it's still single thread limited.

@N0N0111 Год назад

These power consumption graphs in the FPS graph are so insane helpful.

@halrichard1969 Год назад

I am spending $1000 on a Sub Zero beer chiller. It has four channels with four pumps. Each channel is capable of cooling up to 780 watts. It has an 8 gallon tank capacity for a Propylene Glycol mix. It will send solution out at minus 5C. This is for my X3D CPU and my 7900XT. Cheers. Thanks for sharing your OC experience.

@nrabbit300 Год назад

I used to have a beer chiller that I made that used nitrous oxide (laughing gas) cylinders (which I got easily from a dentist friend), want a COLD beer? pop it in, crack a whippet (... take the whippet too should you be inclined) and super cold beer was had in an instant :) I loved that thing but for the life of me I can't remember what ever happened to it, probably lost during a move :( (along with access to dentist friend.. so no reason to build another subsequently)

@godslayer1415 Год назад

@@nrabbit300 a whippet is a small airgun sized nitrous cylinder with a valve.

@ganthrithor Год назад

Can it hang being run constantly? Most refrigeration solutions are designed to cool something down for a while and then cycle on only periodically to control temperatures. They're not usually designed to run flat-out all the time to cool an active heat source.

@halrichard1969 Год назад

@@ganthrithor It can run 24/7 its a commercial unit. It takes as much juice as a mini-fridge and makes about the same noise. It will only run as long as I am on the computer.

@siberx4 Год назад

Running multiple peltier modules in an adjacent ("parallel") configuration like that is actually a really good idea, because TEC efficiency goes up (quite substantially in fact) as its load goes down (with a peak at 15-40% depending on your temperature delta). Running multiple higher-rated units in tandem at lighter load will result in less wasted power operating the TECs (and less excess heat to get rid of) with the only downside being the extra cost of buying more modules and the physical space they take up. In fact, a TEC running at its optimum point at a temperature delta of say 10c can actually have a coefficient of performance over 3:1, comaparable with compressor-driven heat pumps like air conditioners. For something that achieves a CoP of 0.5:1 or worse in "typical" use-cases, this is quite notable!

@christopherleubner6633 2 месяца назад

AlN ceramic TEC modules are usually used for power generation or for extreme mission critical cooling applications. Remember salvaging about 50 of them from a 48V solid state natural gas generator that was originally for backup power at a cell site. It made 48V at up to 120A iirc. The modules were a bit big for cpu cooling though they made awome stand alone water to air chillers.

@zakelwe Год назад

I remember back in the day using a Peltier cooler ... it was amazing just turning it on and holding it between two fingers and one getting hot, and one cold, really really fast. It was just the cooler, get it upside down when putting it in and your cpu was potentially toast as you applied the hot side ! I got some good results but my cooling was not good enough even in those days to take away the wattage of the cooler and the cpu. And it was a lot less watts in those days. This is a good cooler !

@essentialone1 Год назад

Nice to see your cat comes along to supervise things and make sure all runs kitty smooth and Pures like a kitten

@bradley3549 Год назад

You need to know the relative humidity to calculate dew point as well, so that brain box must have a hydrometer in there as well. Very slick!

@lordzed83 Год назад

OOO I see You finally gotten proper size Radiator. Iw been using Phobya nova extreme for last 8 years or so :D

@KhangAmongUS Год назад

That's freaking great for a beast cpu like that, Der8auer!

@louistechttv Год назад

nice video! loved it, i actually use an cooler master ml360 sub zero which use the tec technology, on an 9900k

@sumin889 Год назад

Thank you for the video. I bought it but not yet installed. I think i will soon after watching your video !!!

@HandsOC Год назад

I ordered one of these. Hope that patch releases soon

@TheHighborn Год назад

Yea the thing is great, but can you just make a video where you just pet your cat for like 30 minutes?

@countvonthizzle9623 4 месяца назад

He can't put up KitTeh pr0n! ToS violation!

@jinzo0121 Год назад

Excellent

@xavengarcia851 Год назад

Otherwise, I really enjoy this video and it is very well made. Thank you for considering english speakers, especially even with a smaller demographic in your channels. I really enjoy your content, video ideas, and general attitude/commmentary in front of the camera!!!😅😁

@benni5941 Год назад

Enjoyed it, one question though when you mention the TEK of 210W can't cool the 300W CPU. The way I understand it, the power consumption of a TEK is proportional to the deltaT across the element and not directly the heat load. So it's not just the capacity of the TEK power consumption, it's also related to the capacity of the heatsink to transfer the total load, not just TEK Power = Load Power. So if 210W can generate a delta T of 30°C across the TEK, and your goal is 15°C on the cold side, then as long as your waterblock can hold the hot side to

@todorinskiz Год назад

Thanks for the good reviews! Do you think you could include other benchmarks like Passmark? That would be interesting for people who are looking to improve their workbenches , not just for gaming :)

@lynxesexe2837 Год назад

Very good cat video, liked.

@tonyzayas2085 Год назад

Great vid. I purchased one and I'm happy with it Derbauer, do you know if they plan on releasing the software with Cryo enabled at post while booting up?? It's hard to OC in the bios and then end up blue screaning because of the Temps.

@TristynRusselo Год назад

brilliant~! ...and also RGB

@Tarkov. Год назад

Finally, a use for your stockpile of stock box coolers.

@Hippida Год назад

A friend of mine use peltier cooler some 20 years ago... it was hooked up to a 200l reservoir outside hes house

@SourBogBubble Год назад

Thanks 😎 🤙 🦅

@bw4593 Год назад

Ok this looks absolutely gorgeous. I don’t mind burning insane energy for a baller machine lol. Hope they sell enough that my next build 2-3 years down the line can be built around this ;)

@MonsterSound Год назад

Always interesting.

@imakechildrencry Год назад

Our box cooler now identifies as a pump... I love this channel!

@TheCrazyCanuck420 Год назад

This brings me back to cooling my Q6600 with a Cool-It peltier water cooler. TEC cooling back when CPUs were under 100W was fun but with the higher power consumption today I wouldn't risk it.

@molochi Год назад

Back when we were trying to oc another hot CPU, the dual-cored Pentium-D, I slapped a 100w pelt on top of a copper waterblock and cooled that with a Thermaltake SLK800. The advantages being that it allowed the watercooling to function normally, did not require the peltier to be running all the time, and allowed a lower power tec to assist in cooling without running into that wattage cooling wall. Others did similar things with pelts as inline waterchillers, which can be a simple as a second waterblock paired to a tec and cooled by a second watercooling/radiator setup or just large hsf/block of alluminium. It's funny to remember that the Pentium-D was only like 130w and got all that bad press anyways.

@Ben-ld1qi Год назад

Sounds very adventurous. What's a pelt though?

@molochi Год назад

@@Ben-ld1qi it's that thing the waterblock in the vid is using for additional cooling

@Ben-ld1qi Год назад

@@molochi thanks

@zanderhenriksen6776 Год назад

What I do and have done for a while is I have the radiator outside, soldered the fans onto a few ethernet cat 6 S/FTP cables, and pump the liquid straight from the blocks and out. But I really should delid the CPU, as that's my largest limitation, as well as a quite mid-tier motherboard. Never been able to thermal-throttle my GPU, have yet to shunt-mod it. The components are quite aged by now though. But since ambient outside during winter is subzero, and during summer quite high, there's quite some variance. Thanks to very loud fans and the fact I only have two of them, I can power them from the mobo, set the fan curve appropriate to the temperature of the CPU and it's all fine. But recently I pushed voltage up and now my CPU can sit at 99°C while my GPU is only at 20~30°C - both being loaded nearly to the limit. I hope delidding w/ LM will help better transfer heat from the CPU to the block. But that's just one way to solve it. A very budget oriented one to get the most out of a unbalanced 2016-era setup.

@Fifury161 Год назад

I believe the first commercial CPU peltier cooler was used in the early 1990s to cool a PowerMac 8100 CPU. That design was short lived as the flaw was the formation of condensation. Apple's solution at the time was to swap out the peltier with a traditional heatsink and fan.

@cj09beira Год назад

Would love to see you try to make the "ultimate" peltier cooler, by having 2 water loops one cold and one hot, allowing you to have more peltiers and either getting even more cooling or having each being at its most efficient point. Cold loop: cpu water block, pump, and peltier cold side block. the hardest part would be making a pair of custom water blocks for the peltiers. hot side: peltier hot side block, pump and radiators.

@cem_kaya Год назад

if i am not mistaking Alex from ltt made something similar.

@Greitone Год назад

I think he did this in a past video. It doesn't work very well

@BravoCharleses Год назад

Would it not be easier and much more efficient to use an off-the-shelf water chiller to cool the loop? LTT did a video with a bunch of peltiers as you describe, but that seemed more for the novelty.

@Alex-ku9lk Год назад

@@BravoCharleses They also have a chiller cooling video, man, LTT got everything ahaha

@cj09beira Год назад

@@BravoCharleses their setup was horrible, made with cheap peltiers, on chinese coolers and blocks. but yes its still for the novelty than being a good cooling method

@N0N0111 Год назад

15:03 der8auer you can't make jokes like that, i spit out my water through my nose haha.

@creepy3973 Год назад

i bought my CPU frame, Lapping kit and 13900k to play PUBG. I am going to run 1080 until i get a 4090. i think i am going to get 2- 360ml rads and this cooler. Ty again, love your videos!

@Boogie_the_cat Год назад

Fun, interesting video on something I was not aware of existing. Besides cats dropping things, they often have static electricity. At least in my experience. I like to see your cats in videos though.

@gtijason7853 Год назад

Had similar issues with the last version, the software will go in to standby mode when it realizes the temperature and cpu load doesn't line up. I now run without the software after modifying and run 5, 7 or 12v straight to the tec. Tried many things to gain access and control via i2c etc and went as far as removing sensors until I realized how stupid it was to waste time when the software is not needed in my case. Fun fact, before I started modding mine a power stage caught on fire and scorched the top of the block

@OGSuperDirty Год назад

I love your content, thx for taking the time to make it in English.

@ajneetsipad3178 Год назад

Thing about TEC I learned from astronomy is that they can freeze surrounding air to -40 and if this air dispates are the case it might cause frost and even freeze the coolant

@julienlauzon1106 Год назад

Hi, thanks for the video, do you have any news about software compatibility fix or anything? I really want to use this for my 13900k build, its for browsing and gaming only.

@joshhardin666 Год назад

how much power is the TEC pulling during these tests? Is this safe to run in cryo mode 24/7 on a workstation or is this just a fancy XOC thing to get the benchmarks?

@christianaviola856 5 месяцев назад

Hi I love the way you approach making your content, I am thinking of my own cooling system and I am wondering if you have any thoughts on the temperature differential and humidity , to avoid condensation, any ideas how to make a controller? Unless you will sell me your old Peltier setup LOL

@logskidder5655 Год назад

Water chillers are available for under $400 which are more power efficient than peltier systems and can easily supply water at temperatures in the 0 C range or for more $s even lower. You may have to worry about condensation on the tubing, but a little insulation provides an easy fix. Adding a chiller to a loop does require a little DIY but is not a complicated build.

@shibasss Год назад

What is the power consumption of the cooler itself? And what is the maximum load for the tec itself? Would it be overwhelmed under an all core load?

@ZsoltPalotai Год назад

Isn't the DT1 error code means, that the Delta(Δ) Temperature is not met the expected value? Maybe the controller modifies the PWM for the pump/fan to check their condition, and expects a Temp raise or something along the lines?

@IndianaTony Год назад

This does seem like a really smart TEC implementation. With a couple more improvements (software, fitment) I'd be tempted to try one eventually. Loved the brave little pump. 🤣

@allaneskildsen1994 Год назад

Could there be a possibility to improve by using liquid metal between the nickel plated cold plate and IHS? (if a contact frame also were used)

@lesthegreat Год назад

This is the way to go. I've been using a Frankensteined tec cooler for the last 15 years but it's only now that I'll splash out and get this product. The unfortunate thing is that it will only be compatible with socket 1700.

@prodeous Год назад

Seeing that you can run second system for the app, be cool to see test with amd cpu

@OmarSan2k7 Год назад

Great video!! What is that thing on the GPU power connector?

@Kepe Год назад

The fact that running the cryo cooler required a secondary 12900K system and a total of three Intel stock coolers made me chuckle quite a bit :'D

@ryan.crosby Год назад

It's wild that an entire software package is required to enable a mode that could be a dipswitch on the controller. It adds a lot of bugs and complexity for extremely little gain.

@mikek1187 Год назад

Interesting. Have you considered another test with some "liquid metal" instead of thermal paste as the CPU die/heatsink mating compound? Tests elsewhere on YT have reported notable thermal improvements with this change alone. I wonder if perhaps "liquid metal" would have any positive/negative/neutral impact on power consumption/CPU performance bump ratio?

@ledoynier3694 Год назад

Liquid metal would be a very bad match for sub ambient cooling. Thermal grizzly actually gives a lower temp spec of 10°C minimum to use conductonaut. The TEC cooler could solidify the liquid metal under some circumstances.. Sub ambient, high performance thermal paste is the way to go.

@Crftbt Год назад

Curious how the cryocooler would perform on the 7900x vs 7900x delidded. :)

@justpetettv Год назад

Any improvements on the rubber gasket? I have the Z790 Extreme and contemplating purchase but I won't if there isnt a proper condensation solution in place

@allaneskildsen1994 Год назад

I have bought the cryo cooler, but unsure how the controls are working in general. When the fans and the pump is plugged into the system is that merely a safety feature for not burning the TEC or does the software let you control the pump and fan speed? Furthermore, I have a temp header on the MOBO, which I'm planing on using as a secondary security measure, but not sure how to go about it? What kind of controls would you recommend or what are you using?

@ianshaffer5222 Год назад

Der8aur, just curious, will you do a similar video regarding the Ryzen 9 7950X delidded? Personally I would like to know the best thermals as well as highest stable clocks with the extra thermal headroom.

@ludovico007 Год назад

Great video! Temp on single core/light multi core load seems crazy, but what about heavy multicore load? Could the peltier handle a cinebench multicore load? Thanks

@mirkokurac Год назад

You'd need even bigger radiator. Peltier doesn't do it's magic for free, it consumes a lot of energy - and that energy needs to go somewhere.

@ludovico007 Год назад

@@mirkokurac my question was different. I argue the fact that those peltiers could not handle a full load 13900k and therefore you are going to have worse performance than a standard waterblock. The inefficiency of a peltier system is another topic.

@markae0 Год назад

Great video @15:40 click that mouse!!! Might have to get a robot mouse click software LOL

@Aesir247 Год назад

The "we live in 2022 and you can be whatever you want to be" cracked me up! 🤣

@zunit7279 11 месяцев назад

Quick question. Does the rubber boot have any issues installing if you are using the contact frame instead of the stock ILM?

@2ndLastJedi Год назад

15:04 love it mate, crazy times hey.

@clifflee5404 Год назад

Would be nice to see this used for gpu cooling as well.

@DJaquithFL Год назад

I think with even a fraction of that aggravation that you had to endure, I would just simply port a nozzle of a portable AC unit into a case. 17° C (~63° F) is in range of one of those portable units and as a side benefit it has enough cooling capacity to remove all the heat from both the PC and room.

@jmoore9806 Год назад

It's heading into that direction....maybe like a little mini freezer dedicated condenser

@sayacee5813 Год назад

humidity

@conorabc Год назад

@@sayacee5813 ACs remove humidity

@CrusnikofChaos Год назад

@@sayacee5813 inside the case will be dry and cold, water will condense all over the outside though :)

@volvo09 Год назад

@@sayacee5813 that's not how condensation forms. The concern would be the outside of the case if you over cooled it. Condensation forms when warmer humid air contacts a cool surface. The only time you could get that condition in an AC'd PC case is if you over cooled the PC (say down to 35deg), and then shut off the AC and opened the case... then it would be like bringing a cold item inside in the winter. It would get a small amount of condensation It doesn't happen in reverse (blowing chilled air inside).

@yungnachty4474 Год назад

Its crazy to this that as much of a beast as this is, in leas than 2 years low end hardware will blow it away.

@dr.ignacioglez.9677 Год назад

Genius 👍

@miguelagueda3928 Год назад

I'm guessing the old design might actually have a thermometer for the hot side as well, but it doesn't need to be wired externally as the controller is directly on top of it already.

@Carsalesman47 Год назад

“Luckily we are loving in 2022 and you can be whatever you you want to be…whoever you want to be…and also our Intel boxed cooler identifies now as a pump.” 😂

@grapsorz Год назад

i used to run them on my dual celeron 400. i had to use a 55W element on a 20-25W CPU and it was held at +4c so you should have two times the power to the element then you expect to remove. so if you r aiming to a 300W load a 600-700W element is needed.. that will need to be something spesial as you will need more then one element. 4 should be the minimum i gues. and yes.. i was running a dual PSU setup as well.

@michaelmcinerney2853 Год назад

15:02 Brilliant, you had me laughing so hard my cat came over to see what was going on...

@der8auer-en Год назад

😂😂

@Nobe_Oddy Год назад

I could never afford this stuff, so its great to see that it exists and what it is capable of... THANK YOU!

@yuriserigne5524 Год назад

you should include the additional power consumption of the tec itself

@playerlazar73 Год назад

I build my own pc's since the 2000's . and want to try my first watercooled pc with this waterblock. If a new version comes out of intel, can i still use this ? or do i need to buy a new block again ? and where can i get that 9 fan cooler grid thingy

@MoonshineOctopus Год назад

With the control software running on the Alder Lake system, is there any way you could test the cryo cooler on zen 4 chip?

@geennaam1201 Год назад

Got one remark as a fellow sub ambient cooler Dew point is quite important for daily pc usage, it is calculated with room temperature and humidity I have a little device on my desk to measure both and an app on my phone to calculate dew point Usaly I can cool about 5c below ambient Some cold dry winter days I can just turn my chiller on and play around at 3c

@bingbing3464 Год назад

Damn youre brave doing that daily.

@geennaam1201 Год назад

@@bingbing3464 Hehe thanks, have it running for a good 3 years now Only once had a crash I believed due to condensation. Started because I used sli, with this and 3 radiators pc was a bit to full for my liking A second hand chiller was about the same price as my 3 radiators, so why not, looks a lot cleaner to

@SeanBassBasssn1 Год назад

Great video...... Will have nightmares regarding the Cat around open pc ? Mobile static machine !

@clifflee5404 Год назад

I wonder if this cooler will work with sapphire rapids? Will they need to redo the tec plate for that cpu? Since it looks like a quite large cpu? Can't wait until those new xeons get released.

@aaronmcquaid Год назад

@der8auer When will you test this with the KS proc?

@afiqueshafon343 Год назад

I wonder when are they bring back the Cooler Master Cryo Cooler which featured during the gold sample of 10900k

@J.O.R_BR_Overclocking Год назад

Will the Delta2 Tec scale with your current custom loop setup or will it have a ceiling? My custom loop cools 800W will this make any difference w/ the Delta2? Skaliert der Delta2 Tec mit Ihrem aktuellen benutzerdefinierten Loop-Setup oder hat er eine Obergrenze?

@Alexandra-Rex Год назад

Ah, the MO-RA ❤ Been wanting that to cool both the 5600X and 2950X to make it as silent as possible.

@scottf136 9 месяцев назад

Would have loved to seen a multi-core run to see how it holds up with all cores going full blast. Many of my workloads use all cores and I'd like to get an idea if this product is worth it to me to overclock my 13900k. Right now, I hit 100C+ on 4 cores on a Cinebench R23 run with an Arctic Freezer II 420. I had to undervolt the chip to get the heat down, which means I cannot overclock.

@dodgydruid Год назад

I remember being part of the original Peltier "revolution" as part of the 3ghz single core Barton drive and it was with such I got my name on Overclocker's leaderboard with an AMD 1700+ mobile abs screaming its poor heart out at 3.1ghz stable under water and Peltier and in a Antec Skeleton open air case hehe I lost interest with it after attaining that holy grail and reverted to water until I acquired the first Coolermaster V8 which could cool almost as well under load as my water kit and so bye bye water and bye bye leak checks, pipe mischief and tons of stuff I had to do as that V8 was just phenomenal good.

@aidanpryde7720 Год назад

4:24 "cats are known for dropping things." Linus is a cat confirmed 8/11/2022

@fums0108 Год назад

This is great tech I would like to see this cooler on a gpu maybe even get one for nvidias power plug. How would this cooler perform if you lower the power usage to the same as an 360 aio