Now imagine some of these techniques scaled up to hundreds or thousands of people assigned to a task who do this everyday for a living. Ancient people were masters of wood and stone as they built everything using these materials. We still do for many things today, but through thousands of years of advancement our society has become far more specialised and varied in it's practices and fields of work and expertise, and with modern machines, moving these huge stones today would be far easier and take far less people.
I really get your point. Totaly valid. But the level of precision is absolutely unachievable with our current means. Things got moré complicated for historians once mathematicians, engeneers, geologists and geochimists got an opinion on it. For myself, i was not there, and any rationnal explanation is missing. At the time, the world population was stagnating at around 2 million people.... Those things are all over, simillar in achievement, and irreproducible yet. Not even on paper.
Regarding the huge stones at Baalbek, there is no evidence whatsoever that the Romans were responsible for this incredible feat of engineering, the general consensus is that they built their temple on pre existing building.
The written evidence that the Romans were involved on that are available. But even if this was taken from them we don't think they would be much concerned.
romans did sht,, they squated on allready built buildings,,like all post flood 13k, civilizations.. all the megalithic structures are well over 13k old.. do some research.. not mainstream bs..we can not now, move cut, transport over mountains, what is left on earth.. 600t is our limit,,on special built flat roads.. wake up..!..@@mauriziograndi1750
stones at balbek, or any, world wide, are over 100,000 yrs old.. as are the pyramids.. the builders left earth 13k ago.. so,, that puts a huge spanner in mainsteam bs they spew..this vid is total bs.. they didnt abandon structures,,they left earth..13k ago..
There's a slight problem when it comes to the mega sized stone work. It's simple, today, using a crane, when making precise sets, things over 20 tons, it's more often than not that it takes two or three picks before you finally get it set perfectly in place.... So the issue isn't the moving as much as it is the setting of these stones. You don't just pull the rollers or skids out from under these stones once you get them where they go, they had to jockey it into its precise position. We have cranes and picking eyes today, but the ancients had levers.. and you don't just lever a 100 ton block around once it's sitting flat on another flat stone. It can be done with a lot ropes and levers IF you have a large enough area to stage enough manpower to work the stone...at 200 tons, you have to get off the ground again, meaning they would have to drive wedges under it lift them again to set them perfectly,. Something that would definitely leave unmistakable deep cut groves into the stones, something missing in their work... Around 500/600 getting anything out from under the stone they used to move it with is as big as a feat as the project itself. 800- 1000? It's not happening. Whatever is under it will be staying under it. Even today we would have it to do to get anything used to set it from underneath.
They had completely different technologies to first mine the stones and transport them to these places. The Aswan quarry is not around the corner as we say. Then this precise fit in granite, which cannot be replicated even today. Have you already seen these vases? that were ground to thousandths of a millimeter? There was a time when there was a lot of technology and knowledge. There's no other way I can explain what's going on all over the world
@@levarris14 _"this precise fit in granite, which cannot be replicated even today"_ What grifter told you that and why were you gullible enough to believe them?
Despite "explanations" like this, not only the movement/placement of enormous weights along with incredible precision of cuts, finishes, and shapes will always lead me to consider there were earlier civilizations of much higher technology than we even have today.
I don't think so. Unless it was aliens and they took every trace of their technology with them. We have found no advanced metal alloys, no nuclear waste (that one would be easy to find), no satellites, no cut diamonds, no micro plastics etc. Absolutely nothing concrete that would shout advanced by today's standards. Maybe there was an advanced civilization that built these things and maybe they did take their technology with them when they left. And maybe they didn't really leave, maybe that civilization is what we see in our sky's, those UAPs. There ARE aliens watching us but the question of if it was them that built or helped built some of these structures is unanswered.
Proof? Data? Facts? No? I didn't think so. And what, exactly, was that higher technology? So why have no artifacts, relics, samples, abandoned machines of this "tech" ever been found? And what was their energy source? Think, if you can, before you speak, please.
@@kaoskronostyche9939 if the proof, data, and facts actually matched the style of construction and explained all the anomalies in these structures, people wouldn't be questioning the narrative. These questions are asked by people who actually think about what is being presented as facts and proof. And you are asking the right questions, what is the power source, where are the machines, the artifacts, the technology that fully explains the evidence left on ancient megalithic masonry scattered across the entire planet? Why are the largest most precise stone blocks always the oldest part of the structures? Why do we see the same style in different parts of the world before they knew how to circumnavigate the planet? What about the scoop marks? The over-cuts? The perfect 90° angles? Fully polished flat surfaces that exceed our modern straight edges? These questions are not explained by the technology of our ancestors.
@@RomoRooster There are proven answers to all the questions you list (I mean demonstrated) as well as repeating and well-documented common patterns in human behavior across cultures, across time, and across space. Just because humans are subject to the same tendency toward delusion does not mean they communicated or whatever stupidity it is you are suggesting. I am not going to attack you as you did me because I am so bewildered by people who believe the drek you do with no evidence, just Sci-Fi/ET credibility, that I would not know where to start in explaining your stupidity to you. Moreover, it would do no good because you are a believer and beilvers BELIEVE!
For years I worked in offshore oil drilling business where 50 to 70 tons lifts where a daily occurence even 3,000 ton lifts on occasion, they all had one thing in common strong lifting gear especially lifting slings what was the sling / rope technology back 5000 years ago?
Thanks for taking the time to gather the many videos and edit them properly so that we can easily understand the techniques that the ancients used. It's straight forward and logical. Kudos for a job well done!
Great video! It's very illustrative on how ancient people were capable of moving and place huge pieces of stone. There is still a number of them, however, that can simply not be attributed to ingenuity, like the balbek stones (that are simply too large for these techniques to be applied), or the pink marble stone blocks present in Great Giza (they were moved hundreds of miles and accross a chain of mountains, and they were also lifted several hundred feet from the ground). It's also the case for the Sun Temple in Peru, where these blocks had to be moved no tgrough a grassy slope, but to an actual mountain peak, it doesnt take much analysis to conclude it's impossible to do it with logs and ropes. It's worth mentioning as well that the level of masonery we find in many of these ruins, in terms of precision, smoothness and geometrical proportion is impossible to be explained without consudering very advanced machinery, or something equivalent to that. So, please, open your eyes, and accept. There is at least one more ancient civilization that could do much more than the Romans and Egyptians could. They were unfortunately extinct, and forgotten. But the evidence is plain for anyone who wants to see it.
your brainwashed.. today, we can move 600t max,, on a special built road.. flat,, not over mountains, valleys as they did.. the blocks at pumu punku, came from 1000 ft, up the opposite mountain, then 1000 ft up to where they are.. all these structures are well over 13k.. minimum..more like 100,000 yrs old.. heres a shocker,, aliens made man genetically, as workers in mines.. the flood was meant to destroy us 13k ago.. FACT.
I will always believe it was done using hydrolics. Huge towers that slid on skids and held a large sack of water that was connected to a rope that went to a pully at the top and another at the bottom, then to the stone being pulled. Or through another set of pullys on the frount that pulled it forward between pulls on the stone.. Thing is when I first started writing about this it was before it was known that lots more water still flowing out if the hills along the nile then. That majes how the fed them easly understood now. But what do I know? Were told to follow the experts say and not think on our own. Even when logic proves the experts as being wrong. As the logistics of making enough rope would have been staggering alone. Where this idea only required one masive one that easaly could have handled the weight of even the colossal stones. Just got to do the math and see how many towers it would have taken verses the water they could hold have held.
No one has neglected them. There are many great books on ancient Peru and it's history. There are plenty of things that the Peruvians could NOT do that the Romans did; much of it has to do with the immediate environment. Humans are remarkable creatures.
The baalbek temple clearly shows bevelled stones and non-bevelled stones of all sorts of sizes and shapes sitting next to each other ABOVE the triloton stones. Clearly a case of RE-USE. The clue is in the name: Baalbek. The temple of Baal. A Cananite god of child sacrifice destroyed by the israel in their first war under Solomon. Way before Roman times. WAY BEFORE.
I think the wheel may have invented itself. The action of something losing traction because it rolled on a round stone or branch pretty much had to happen. The attaching of an axle is the game changer. Rollers are a natural phenomenon that always existed. Rollers like logs or pipes or pvc tubing or even airbags have always been able to roll. You can roll things through extremely tight spaces with a bunch of small rollers.
Leave the desk and go quarry, move, carve and polish one of the Serapeum stone boxes with small radius tall wall blind cornered interiors. We can not duplicate that work let alone the high accuracy thin wall hard stone vases nor would we even try. Proof Romans moved those 3 big stones? First account for all the abnormal ancient stone works then account for all the resources and technology necessary then propose theories.
In the introduction, the Pantheon is Roman and it was made with 13 foot thick concrete walls in the rotunda and a concrete dome overhead that is 13 feet thick at the outer edges and 3 feet thick at the oculus. The only stonework is maybe the columns of the porch which may be actually spec'd from Egypt.
romans did sht.. all those buildings inc. pyramids are well over 100,000 yrs old.. all those unfinished objects, inc. the ''box'', in the serapean, were abandoned 13k ago, when they left earth..
That old film of Ed leedskalnin shows him moving a 5ton block. That was probably the limit of those tools. Just HOW he moved 20 and 30 ton stones is still quite the mystery
@@abrogard yup. Nothing to see here. Pay no attention to the man behind the curtain. Someone else did a video debunking the whole thing. No need to fret or lose sleep over it. Do not think for yourself. Experts have already figured it out. Go back to sleep. It was all done with mirrors, and geopolymer. The pyramid is filled with noodles. Nothing to see here.
Good video - but there's still too many unanswered questions about how ancient civilisations moved huge stones and the accuracy of their constructions. The great pyramid for example, with the laser accuracy of huge granite blocks which you can't fit a piece of paper between blocks. I guess we'll never know how they achieved this.
the pyramids are well over 100,000 yrs old, built as factories..not by us.. as all megalithic structures were. we can now, today, only move 600t, on a special made road.. work it out.. we, & the romans, did sht.. look up nan madol, the natives say the blocks were cut, flown down, built, by there ''gods''..aliens.. viper tv sumerian tablets. unchartedx.. brian foerster.. the facts by how to hunt.. old vids of, everything inside me.. might learn something..
All those questions have been answered and demonstrations have been done. My thought is that you prefer the "mystery" of not knowing to being open to learning what has been discovered. If you have an open mind you can check out the work of you tubers "Scientists Against Myths", "Ancient Presence", and "Sacred Geometry De-coded", for a few.
@@russellmillar7132 Don't be so foolish, feel free to provide the answers and demonstrations to this mystery. There is only theories put forward by academia. Do you really think anyone knows for sure? That is wishful thinking my friend.
Great Pyramid of Giza - Wikipedia: It was built by quarrying an estimated 2.3 million large blocks, weighing 6 million tonnes in total..... Pick a number: say 5 blocks per day comes to 520,000 which comes to completion in 1425 YEARS. How did 5 stones a day arrive? There is no accurate number about people brought into or bought as slaves. How many people would it take to carve, remove, and transport a 100 ton stone? Vast numbers would have to be fed. You would think there would be some sort of proof of this concept. There are historical accounts of taking slaves after certain events but they ran from two digits to 1,500 as I recall. Having a magical crane is all nice and everything, but how did the stones get to the site and be used in the lifetime of a particular pharo? Or did off duty farmers and slaves move and place say, 1000 stones per day? How many cranes? How did the stones get lifted high into the air? At ten minutes look at the monstrous effort to move one 250,000 ton column. This is followed by a clip of a crowed dragging a rock 18 miles along wood with a fat on it. That is ONE rock. The recounted other examples were one time huge projects using, mostly, modern equipment. There is rarely any deep thought to pop concensus whimsy.
_" large blocks"_ Not so large. The average stone in the great pyramid was 2.5 tons. _"Pick a number: say 5 blocks per day"_ A number pulled directly out of your ass. Look at it this way: the labor force for the great pyramid was an estimated 20 000. The average weight of a stone in the great pyramid is roughly 2.5 tons. The great pyramid itself is roughly 5 700 000 tons. A team of 10 men can easily drag 2.5 tons, even up a small incline, especially when rollers and sledges are used. So we've got 2 000 teams moving 2.5 tons each. If each team moved only the one 2.5 tons per day, that's 5 000 tons per day. Divide the mass of the pyramid, 5 700 000 tons, by 5 000 tons/day, and we get 1 140 days. Divide that by 365, we get 3.12 years to build the great pyramid. I think we can both agree that is a ridiculous time frame. Okay, so let's say that because of the annual Nile flood and all the work that had to done planting and harvesting, that the labor force was unavailable for half the year. Now we're up to 6.24 years of construction. Now, I think we can also agree that 2 000 work teams of 10 men each all on-site at the same time is also not viable. So let's halve that. Now we're at 12.48 years. That's still, IMO, too many simultaneously on-site, even considering how huge the pyramid is. Now, the overwhelming bulk of the stone for the great pyramid was quarried less than half a kilometer away. If we say that half the stones were in transit to the job site while half were being put into place, that brings us down to a not unreasonable 500 teams on-site over a 12-hour day. It also makes the construction time 25 years. That matches the 25-years between the date Pharoah Khufu ordered construction to begin (c. 2550 BCE) and the ascension of the Pharoah Djedefre (in c. 2575 BCE), who oversaw his father’s funeral rites in the pyramid’s attached mortuary complex. There's my math. Feel free to tell me which part is impossible, and *WHY.* The "why" is important, otherwise you'd just be making the same old fallacious argument you've already made.
Sliding, dragging, tilting.....fine. But how many people to LIFT these 50 ton blocks on top of another with perfect precision? Ramps? Give me a break! Also explain how they CARVED these 50 ton granite blocks so perfectly smooth that when fitted together, you can't get a razor blade between them.
I see nothing in this video to explain how stones, of 500 to 1,000 tons could be lifted about 12 meters and then brought down a rocky slope! There is in fact a quick photo shown in this video of one such site!
Great video. Very mind boggling and informative .it has opened my eyes to learn of these techniques which should be shared in schools which don't really mention these super interesting skills. Thanks. Best doco I've seen in ages. 👍👍👍
watch these.. then wake up.. viper tv sumerian tablets.. unchartedx.. the facts by how to hunt.. praveen mohan.. old vids of, everything inside me.. get some truth,,not this crap..
4:56 The Romans moved obelisks weighing a few hundred tons from Egypt to Rome which is over 2000km away, so it doesn't seem too much of a stretch for them to scale up workforce to drag a few 800 ton blocks just 850 meters in Baalbek from the quarry, probably wedged up onto wooden tracks/rollers, maybe helped pulled with capstans. 9:28 shows how easily a 250 ton column can be moved over wooden rollers, they probably did something similar to this.
According to records from New Kingdom Egypt, they were dragged to the site with draft animals, then pulled with human power and mechanical advantage with the aid of compound pulleys. The sarcophagi were hollowed out at the quarry which made them much lighter (45 tons rather than 80-100 tons). The tightness of the passages actually helped to make turning the corners with incremental movements, easier to accomplish. The bays where the boxes were moved to were pre-filled with sand, Once the box was in position, they pulled the sand out and lowered the box to its position. My thought is that if the ancients really had high technology, none of this stuff would be amazing or remarkable. It's the fact that they figured it out with just intelligence and ingenuity, planning, and coordination, that makes this far more exciting, IMHO.
Think about the emotional roller coaster they went thru when Hall went down, Dobbs gets sacked for a safety, he fumbles 3 times. And then he drives them for 3 TDs the last one in 2 minutes for the win!
This is a cool content, idk why many terminally online conspiracy theorist have to attack you for showing science. They forget these thing take time and efforts. Science is always about evidence, they always spouting sfuff seemingly from thin air. Anyway your content is amazing, dont late the ignorant let your spirit down.
I have trouble with all these theories. They didn’t have farmers with 8 row equipment and grocery stores to get food they were in a day to day struggle to live. No one had time to make all these efforts just to see a statue set in place that was of no use to anyone. They had horses and camels that was a lot stronger than a man, but even with them it make little or no since to put out so much effort for so little gain. I truly believe there is something missing besides brut strengh
The societies that are being mentioned here were much more advanced and had the food resources, labor, time, and motivation to do all of these things and more. The societies that did not weren’t able to do any of this and many have been forgotten.
Excess food was never a problem in Egypt.. they had so much extra grain that once Rome took over it was called the breadbasket of the empire... Egypt produced enough excess grain to feed a million people in the city of Rome. They had plenty to feed their workers. The Egyptian army was known as the great bread army because their soldiers were given a rational of 2lbs of bread a day... and as a result... they were all fat.. no joke. Im 100% serious. Remains of ancient Egyptians, even commoners found in the desert sands, show that their citizens were more often than not, quite fat.
And how do you know all this..? For all you really know they just might have had some high technology. Monks in Tibet have moved large stones with sound waves..! Sounds crazy but it is not..!
I do, t o o, miles. You're too nice. I call it :more bullshit from the mainstream. I'm guessing these fake academics are getting paid somehow by someone or some group to try to bolster the mainstream lies.
lol the egyptians didnt build shit they just carved crude jeirogliphics over pristne craftsmanship the pyramids were built before the egyptians got there
I'd like to see stones as big as the ones at Stonehenge moved up and down the Preseli Hills in Wales by this method, especially in the piss wet pouring rain.
@@ArchaeoLogic I am not sure why you have to continually explain the very obvious. I've seen less detailed videos of how the pyramids of Giza were built and been convinced that things may not be as difficult as we think.
this vid is mainstream bs.. blocks at pumu punku, were cut, from the opposite mountain, 1000 ft up,, then laid on the cut top of the mountain where they are now.. kailash temple, was cut from a solid hill of granite.. longyu caves, ect,, theres no burden, rubble , anywhere to be found.. we didnt do sht, except mine minerals for our creators..aliens.. ref. viper tv sumerian tablets.. unchartedx.. the facts by how to hunt.. praveen mohan.. .. old vids of everything inside me..
Several hundreds of thousands 50-100 ton, perfectly cut hard granite from several hundreds of miles away over difficult terrain- then placed hundreds of feet in the air or maneuvered through such tight spaces- is not satisfied by this hypothesis, in my opinion.
Brilliant compilation of video footage and informative information truly amazing engineering skill throughout the centaury's thank you for generating a fascinating video
I know that for archaeological reasons it would never be done but I'd like to see Stonehenge be finished being built. "it only took 5000 years but its done being built now!"
@@Wanderinghead That's currently something I'm working on, still have a few pieces to put together to try and help visualise it well as this video does for moving large weights, but hopefully have a video out for that in the next month or 2 after my next few projects :)
Everything was real good until your last statement. You said the ancient stone workers didn't have to move theirs that far because they quarried most of it on site. Most of the materials in Egypt was quarried from hundreds of miles away and over a couple mountain ranges. The sphinx temple was quarried from sandstone on site and other stuff it of sandstone but all of the granite and other heavy materials weren't from anywhere close at all.
_" Most of the materials in Egypt was quarried from hundreds of miles away"_ You and everyone who upvoted you are 100% wrong. The vast, overwhelming bulk of the great pyramid was quarried less than half a kilometer away from the job site.
@@AlbertaGeek you also forgot about the fine white casing stones from Tura. Enough to cover the entire pyramid. I think like another 65+ tons of mortar. How many tons of rubble? The things isn't all solid limestone blocks. So your "99.9%" seems like a bigger reach than my statement of most. And there is also this big problem of figuring out how people got into all of the inner space of the pyramid to examine the materials?? Since the majority of what we can see on the interior is granite and other non Gaza limestone in not sure how you can be so confident in a claim of 99.9%. Surely you and everyone who up voted you are clearly wrong! Lol. Have a great day!
@@andrewshedron425 _"not sure how you can be so confident in a claim of 99.9%"_ That wasn't me, that was someone else. Get organized, dude. _"the majority of what we can see on the interior is granite"_ Incorrect.
Even with the advanced technology of our time, there is no way can those stones be moved. How about those ruins up in the mountains with no access for huge heavy stones to ve drag. Still a mystery
Google Le Tourneau L-2350. Obv they didn't have these things back then, but at least ppl like you should stop spouting the bullshit that we can't move heavy things.
very interesting for what can be done. Now, how did they mirror polished durite and granite and andracite to that level on precision? Chichen bones? ! 200 tons is still not possible for us today and yet there are three of those under jupiter's temple, jacked up, more in jerusalem, and with stones not coming from a throw away... please.... good work explaining what is possible though... Thanks.
We don't give those that came before us enough credit. It may have been a long time ago, they may not have all the technology we have now, but they weren't dumb, there were just like us, just as smart, and VERY ingenious. Don't think that they couldn't have done something, wonder HOW they did it, because they DID do it.
That's not the point, but quite the opposite. We stand in awe of what these ancient cultures were able to achieve as the tools ascribed to them and the materials of the time, the ones that were found, make it hard to explain. So the question we want answered is: which techniques and tools did they have in ancient times for which there is no historical record ?
That telephone exchange was so big, ALIENS must have done it. The aliens were so good at hiding (using alien technology) that we never saw them and so that PROVES the aliens did it ! 🙂
I've always been interested in the prehistoric moving of large objects and have watched every documentary that came along. A problem that I saw with quite a few of them, and you might keep an eye out for them, is that is that not realizing the difference, they used climbing rope. Climbing rope stretches (for safety). Natural rope does not. Therefore most of the force applied to the rope is lost in stretch. You watch as the fifty or so volunteers heave the ropes five feet or so and the stone moves ten inches. Funny to watch but a big problem when the expert in charge determines that "this is not a viable way to move big stones." Here's a mental image of me screaming at the TV. I remember two on Stonehenge, one on the Moai and at least two on the Pyramids. Unfortunately, there were more.
Apparently according to some sources they used levers to raise them a bit at a time with blocks under after each lift. Which would work at lower heights but try using that method for the Granite beams above the Kings chamber...maybe not!
I've an old memory of a doco about the Orkneys (IIRC) where a man recalled that his father used to use the natural lubricants of certain seaweeds to assist in the movement of large loads. Is there any non-anecdotal evidence of this and or any historical evidence of this technique being used for stones?
Love that channel! Yes this video doesn't show how a particular structure was built, but is more for helping visualise different techniques ancients could have used to transport huge weights
It would be amazing to see demonstrated, I'm trying to dig up that documentary from the 90's where 100 people pull a 45 ton stone for 18 miles over wood rails lubricated with animal fat, I'm sure that'll help visualise a lot too!
So how did they lift those 1 thousand ton stone blocks many metres into position,Also how did they lift the stone pyramid blocks to the heights read and place them precisely hundreds of feet on top of each other and also the Aztec pyramids, I have seen granite blocks several feet thick and 12 feet long split in Sri Lanka by ancient technology with such precision cuts like a laser,❤And no chipping or fractures in the granite, Figure that one out,,,,,,,
The 1000+ ton blocks are still in the quarries so they weren't transported, maybe they were just outside their capability at the time, but considering the Romans moved obelisks weighing a few hundred tons from Egypt to Rome which is over 2000km away, then it was certainly possible for them to scale up workforce when needed to drag the 800 ton blocks just 850 meters in Baalbek, probably wedged up onto wooden tracks/rollers, maybe helped pulled with capstans. As for the Pyramids, the only really large blocks are around main chambers, grand gallery and entrance keystones, most of the pyramids structures are filled with rough inner stones and concrete, and all the outer and casing stones were only 2-4 tons each, we can only guess at their exact methods as we don't have much documented like we do with the Romans, but they probably used similar tools and techniques as eachother.
I agree, those massive stones are almost impossible to be moved from the quarry site up to where it is located now. They just can't accept that the ancients were far more superior in terms of science and technology.
@@helbertsantos3275 It is only if one is fortunate to visit any one of these sites anywhere in the world that one can appreciate the level of skill and technology that these supposed primitive civilisations had available at their disposal,Also stone coloums that have keystone mechanisms chiselled into granite on of the hardest rocks that have piers been supported to this very day all done perhaps by hand ,
The Roman additions to Baalbek are clearly visible. Along the adjoining wall to the Three 800 ton blocks is a space that would fit the 1000 ton blocks that are still in the quarry or en route. That space is filled in with much smaller blocks that are Roman. For whatever reason the construction of the megalithic platform was stopped (quite suddenly by the looks of it), and the Romans carried on later but at a scale that they could handle. The Romans were capable of amazing feats of engineering and they built unbelievable cities and monuments and didn't tend to leave things half finished. They had control of this territory for a long time and had no reason to switch to smaller blocks if they were capable of working with the larger ones. Why would they purposely scale down the site midway?
Wait, what? OK yes, but no. If your posit had any validity, you also tell how these multi, [kilo], ton were moved from point A to point B as the 2 points were miles, [kilogramz], apart.
Horses wouldn't have worked that well to move items back then either. It wasn't until about two hundred years ago that humans harnessed horses properly to pull items. They used to yoke horses like oxen. The issue with that is horses don't have as strong of a breast bone to be as effective. It would also restrict a horses breathing. Affecting it stamina as well.
Boats? They only found flimsy wooden boats in Egypt, on the shallow Nile? Locks weighing hundreds of tons? Bullsh!t The Romans never built Baalbek, they renovated it.
There is still the question as to how Egyptian statues of immense tonnage were sculptured with such precision that they were almost life-like. No modern technology exists that could be so amazingly precise. Thanks for this great video, though.
They aren't that precise when objectively measured. Not that hard to achieve near symmetry with plum bob and measuring stick. The techniques developed and employed by dynastic Egyptian stone masons and sculptors has a vast amount of literature devoted to it. Doing a little study of the topic could remove some of the mystery. Simply repeating what you hear Ben from UnsupportedX, or Brien Forester, or Graham H., or Randall C. say is more likely to be your approach I fear. Ciao!
@@russellmillar7132you are wrong about the statues. Some are perfectly symmetrical and carved with amazing precision. You can find the info on the web. All you have to do is look. The fact is, the things the ancients accomplished certainly were not done using the primitive tools our archeologists claim they had. There's just so much we don't yet know, and may never know.
there is no evidence of any use of any form of pulley system or wheel or wheel shaped block and pulley system ever used by the Egyptians! Even Egyptologists, swivel-eyed loons as most of them are state that categorically. So why come up with a fanciful (although logical ) description? It flies in the face of the so-called experts
Interesting but doesn’t answer all the questions about ancient architecture on the precise cutting of stones and ancient granite vases precise to the thousands of an inch. They could not be reproduced even now
A current theory holds that in ancient Egypt huge loads were transported over sand on human pulled sleds. The sand was made firm by pouring water on it from the front of the sled. This I believe is erroneous. It would require too much water, and footing for the pullers would be too loose. Instead, the sleds would have been pulled on paved causeways with a little sand as lubrication-- under the runners, not the feet of the pullers.
Hmm perhaps theres a massive source of water near any ancient egyptian urban center.. hmmm.. perhaps its the nile river ? Also we have a fuckin depiction of ancient egyptian pulling a massive statue with sledes and watering them.
Between 10,000 and 5000 BCE the Sahara and the Nile valley were in what is called "The African Humid Period", wherein the Nile was more like the Amazon. There were lush grasslands and forests and the region had monsoons and frequent catastrophic flooding. After that, the desert began to reassert itself and all the vegetation dried up and burned. Once (after a millennium and a half) the climate returned to pre AHP status, the Nile Valley became the arid desert we see today...there was plenty of sand to work with.
Yea great vid, you can have as many people as you like on pulling a rope. The question is , is the ropes they made able to resist the pulling force of maybe a hundred people pulling on one large rope. The same with the lifting gear ,the theory is good but seeing that large stone swinging on what look like a very small diameter rope. How good were they at rope making.?
Gave up less than 4 minutes in due to a reference to the trilithon stones at Baalbek being deemed 'Roman'. Yes, the upper levels can be Roman but not the platform that they are built on. It is so obvious when you take the time to look and investigate.
It’s not that I doubt that humans could have done this. The question is WHY? The Seripeum is not a burial place for bulls. That’s just silly. The great pyramids are not tombs. The walls at Sacsayhuaman simply don’t make sense! So why were early humans going through these insane efforts?
Yes it was a burial place for bulls! The reason it is called the Serapeum is because it was dedicated to the Serapis Bull, whom they considered sacred. There is a lot you could learn just by studying what has been written. But you'll likely stick to watching videos by Graham Hancock and Randall Carlson. You'll be asking the same empty questions twenty years from now. Ciao!
@@russellmillar7132 graham Hancock seems too much into DMT. He talks about other beings and extraterrestrials. I don’t know who the other guy is. I understand that bull burial is the idea. But it still doesn’t make sense. One unfinished-damaged block is left in a side tunnel? Why not remove it? HOW did they move these boxes into the earth?
@@abassett22 As a life-long atheist, I agree that the Egyptians of the new kingdom were crazy sons (and daughters) of bit*hes for believing in all their gods and erecting huge statues and digging tombs into the bedrock, building sprawling funerary complexes. How ridiculous! But I am nonetheless fascinated and mystified and awed at the abilities of pre-industrial people to accomplish what they did. It has be demonstrated many times that large, heavy objects can be dragged using human power and/or draft animals. In most cases (not all) the distances are not that far. The limestone blocks, and the filler rubble that comprise most of the bulk of the pyramids at Giza where quarried within a couple hundred meters of the site. The youtube channel: "Ancient Presence" does a great job on the Serapeum, They have a three part series that goes into all aspects of the possible methods and techniques that could have been employed. When you say: "Humans could have done it"...what or whom do you think the other options are?
@@russellmillar7132 How was it a burial place for bulls? Were bulls found in the boxes? The boxes are EVEN FINISHED being made. I understand thats what people assume and thats why they claim, but why isnt it done??
I wonder just how the would have had populations large enough to do the work, how many people were available to do the farming tasks to feed so many people, also, how could a Pyramid be built in the life span of an Pharoah, also, without modern sharp cutting tools, how could stone be so accurately cut? Me, I favor the Aliens, too many things against human endeavour.
Nope. You don't know anything about material strengths. You can use wood sleds for weights of under 100 tons or so. Once you get over that, the wood disintegrates and splinters. You cannot move 1000 ton blocks on wood sleds.
You don't know anything about surface area and psi. I'll move a million tonne block on wood if the PSI remains low enough. Award for dumbest comment trying to be smart goes to you
People, who think it *had* to take more advanced technology, than we have today, remind me of those who believe there *has* to be a god. The 'Russian Thunder Stone' is one of the largest rocks ever moved by man. The method, in which it was moved, is amazing.