Тёмный

This is MUCH harder than I expected - Chevy Astro Budget Camper Van 

Hi, I'm Chris
Подписаться 4,6 тыс.
Просмотров 4,9 тыс.
50% 1

In this video I start the build out of the interior of my van. I am slowly transition this van into a proper camper van. Here I show you the truth and the struggles of doing it yourself without experience.
Check out my Patreon I would love your support:
You also get videos early!
/ buildsunited
Check me out on IG: / buildsunited_
I have a website:
AutoMotoNation.com
#BuildsUnited #AstroVan #InteriorVanBuild
Disclaimer:
Due to factors beyond the control of Builds United, I cannot guarantee against improper use or unauthorized modifications of this information. Builds United assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Builds United recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Builds United, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Builds United.
Furthermore, the links posted within the description may or may not contain affiliate links. If used, I trully appreciate the support!

Опубликовано:

 

14 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@ChrisLee66
@ChrisLee66 2 года назад
I like this guy!
@dakotabautista2417
@dakotabautista2417 2 года назад
Building out any van is very hard if you wanna do it the right way and make it look awesome! Especially a passenger van with nooks and crannies and grooves and windows to work around! It’s looking awesome and thanks for the tips that helped me complete my build!
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
Thank you Dakota! Ill being doing it as right as i possibly can 😂 all while being simple
@helloman271
@helloman271 Год назад
@@ImChrisDeDecker hello, do you think it's better to buy a work van and convert it into a camper van?
@evanlockard2073
@evanlockard2073 2 года назад
Came for Astro van content, stayed for “hole in my van” song
@dawnyoumans2472
@dawnyoumans2472 2 года назад
Love your videos thank you for taking the time and sharing them. Helps alot. You had me cracking up with the van hole 😆
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
I am a DIYer who makes mistakes but has fun while doing them 😊 Thank you very much Dawn
@dawnyoumans2472
@dawnyoumans2472 2 года назад
@@ImChrisDeDecker Well I enjoy your videos and have helped me alot with my Safari Thank you
@1922BluePhoenix
@1922BluePhoenix 2 года назад
I see these vans are gathering a following
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
Just a little
@guymurphy6982
@guymurphy6982 2 года назад
Great video. Good tutorial on scribing panels. Wish I could have seen this before starting my build, it probably would have came out better. But one thing I did learn from my build, the blemishes in your build will not decrease the enjoyment of your travels in your van one little bit. Have fun with it.
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
That is exactly what I am thinking. I will still truly enjoy the adventures no way around it. I could have Scribd and made the scribe a bit better. But that is for future Chris
@AstroVanTribe
@AstroVanTribe 2 года назад
Never hesitate to call whenever you're thinking about doing anything woodworking related BEFORE you start, man... :) I'll call you in a bit, I'm about to install a bidet (NOT in the van - I wish)
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
So far all I used is a 4'x8' 1/2 ply and 1/4 ply, 1"x3" lumbar and a 2"x2" Oh my goodness, the Patron credits got botched I have zero clue how that happened because i rechecked it several times. I would re-upload the video but doing so is confusing. So sorry again. The Crazies: Brady B-Team (the actual a team): Pappawasarollingstone Boom Work Ethics: Caleb Check out my Patreon I would love your support: You also get videos early! www.patreon.com/BuildsUnited
@3dpowerproduction
@3dpowerproduction 2 года назад
Hey man! Happy memorial day weekend to you!
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
Appreciate it buddy! And you too!
@cdoublejj
@cdoublejj 2 года назад
riv-nuts were a nice touch and sturdy. you have me curious about DIY steam bending but, thats hell sturdy plywood too likely not practical i might assume
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
I have seen that done on some woodworking videos I have watched, but that is out of my reach 😂 3/4 scribe cuts would have been the best route imo.
@brucelangseth8566
@brucelangseth8566 2 года назад
Looking forward to the finished product. Currently doing our third van conversion and still always looking for new and better ways to fit those damn snug lugs. :)
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
Same here, I appreciate it! Snug plug may be a good temp fix
@cdoublejj
@cdoublejj 2 года назад
jb weld the hole shut? don't weld it shut unless you've learned how to quickly air cool the tachs and some experience welding. you'll warp it. where as JB is a two part expoy. that or some semi regid expoy
@arthurcolwell1962
@arthurcolwell1962 2 года назад
Use 3m spray glue and cover panel with fabric and foam Matrix . it will cover your mistakes as well
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
Perhaps, I have material and Gorilla spray adhesive for the exposed metal. Im planning to simply stain the wood. I do not think the mistakes will haunt me too much. If it does, I can always go back and cover it.
@tabletsamg7425
@tabletsamg7425 2 года назад
Exelente video y gracias por poner los sudtitulos en español soy de México CDMX y te sigo es todos tus videos una pregunta que modelo es tu camioneta
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
No problem! I am glad I am getting viewers from Mexico 🙏 It is the LS model
@williamhock9822
@williamhock9822 2 года назад
Awesome GO GATORS
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
I am excited to see how Richardson performs as the main QB. Should be a good season
@arthurcolwell1962
@arthurcolwell1962 2 года назад
Why didn't you use all composite aluminum panels and metal studs to cut weight ?
@cdoublejj
@cdoublejj 2 года назад
a contour gauge might help with this jpb. amazon has them
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
Totally forgot those were a thing. Ill order one soon!
@Skummy123
@Skummy123 2 года назад
hey I noticed you still have your rear seatbelt mount in above. I grinded mine off cause its unneccesary and just blocks the window a tad bit.
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
Ive put that on my mental to do list before I got to the ceiling. Tbh, I forgot about it so thank you!
@Skummy123
@Skummy123 2 года назад
@@ImChrisDeDecker I love your build and recently back in January bought my astro and been working on it since. Been loving your videos.
@walterhoward5686
@walterhoward5686 2 года назад
You could have probably got away with just scribe cut the back of the plywood about a 2/3 of the way through the plywood spaced about three inches apart it should have given enough flex to install the panel !
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
That is what people are telling me. Next time hopefully I will think of that!
@KindCreature1
@KindCreature1 2 года назад
Nice furry kid you have there.
@ImChrisDeDecker
@ImChrisDeDecker 2 года назад
She is the best. Thank you
Далее
2-Year Chevy Astro Camper Van Transformation
37:52
Просмотров 20 тыс.
LEAKS & REAR DOOR TROUBLE: Fixing My Chevy Astro Van
12:11
Budget Micro Van Conversion Tour | Chevy Astro
10:53
Просмотров 10 тыс.