This was ROBBING my Big Turbo MK7 GTI of 50+ HP!

Подписаться 6 тыс.

Просмотров 55 тыс.

50% 1

Check out ARM's Products here! - armmotorsports...?sca_ref=2018864.CprwoYEMbS
Want the same FMIC? Here it is! - www.armmotorsp...
Thank you for watching, I hope you've enjoyed!
Don't forget to Like and Subscribe for more content!
Join my FB group here - / 188583259858478
2017 GTI S
Mod List
SneekyTuned
TPC20BB
HPA High Pressure Fuel Pump
EQT Brushless RS3 Low Pressure Fuel Pump
EQT 5Bar TMAP Sensor
Bosch 4Bar PUT Sensor
Megan Racing Catless Downpipe
Custom 3 inch Catback Exhaust (Vibrant Ultra Quiet Resonator & 2 Universal Mufflers)
Quad exhaust tips 4 inches each
Forge Motorsports CAI
Forge Motorsports Turbo Blanket
ARM Motorsports Front Mount Intercooler
ECS Driver's Side Air Scoop
BC BR Series Coilovers
034 Dogbone & Pendulum
Konig Ampliform's 18x8.5 +35
Continental Extreme Contact DWS06+ (265/35/18)
ECS Dogbone Mount
EuroSport X-Brace Stress Bar
Unitronic TCU Tune... now EQT TCU Tune
Brisk ER10s
RS3 Coil Packs
Aftermarket Headlights
Dynamic Mirror Turn Signals
Window tint 35% all around with 5% Windshield Visor
Spec-D Tail Lights (Gloss Black Housing with a Smoked Lens)
ECS Carbon Fiber Diffuser
ECS Carbon Fiber Rear Hatch Spoiler
ECS Carbon Fiber Lip
Carbon Cartel Side Skirts
Seibon 10mm Wide Fenders
CMST Tuning Carbon Fiber Hood
Metal Amazon Paddle Shifters
Gloss Black Badges
Clark Plaid Inlay's
Carbon Fiber Tail light trim
Carbon Fiber A/B-Pillar Cover
Aggressiv Carbon Fiber Engine Cover
CJM Industries V2 defrost vent AP mount
And a few other little things here and there.
#ARMMotorsports #Sneekytuned #BigTurbo #ItsNotStock #TurboPartsCanada #CarMods #CarbonFiberMK7 #ForgeMotorsports #BMPTuning #ECSTuning #Transformation #PhotoShoot #CarShows #CarMeets #Cars&Coffee #Review #Reliability #Stage2Tuned #Reactions #Family #Cars #Top5 #Handling #GTI #CarbonHood #CarbonBonnet #CMSTTuning #BADGESKINS #Emblems #Overlay #ASMR #ExhaustSound #DIY #Paint #Intercooler #Detail #Wash #BlackCar #XBrace #StressBar #EuroSport #VWMK7GTI #Takeaways #Overrun #Flames #Backfire #MK7GTI #RoadTrips #VW #Install #BCRacing #Coilovers #Lowered #CoilPacks #SparkPlugs #APR #Top10 #Aero #Suspension #Seibon #Fenders #Widebody #Top3 #CarMods #MRC #5150 #Downpipe #MQB #Tune #Tuned #POV #Carbon #SideSkirts #CAI #ColdAirIntake #Performance #Tuning #Tuner #Volkswagen #German #HotHatch #MK7 #FMIC #CTS #ECS #USP #Turbo #Mods #Modified #Driving #PopsAndBangs #EQT #COBB #CarbonFiber #Diffuser #Valance #RearDiffuser #Unitronic #Euro #Stage2 #Stage #Catless #OEM+ #MK7 #Tint #LPFP

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 215

@zebedee147 2 года назад

I've gone the other way, stuck a massive Wagner intercooler on and going to rebuild the turbo but keep it is20 but with stronger internals. Then run the boost up a bit

@WaseemKhan-iu4bh 2 года назад

I prefer the is20 over is38 especially for drivability...i miss the low down torque and responsiveness you get in the is20 that is absent in the is38

@TheeBatman02 2 года назад

Well with this solid steel piping it’s actually a much healthier boost than silicone piping since it’s a solid flow of boost, where as the silicone stretches a bit, so the flow is more inconsistent.

@HaydenCroix 2 года назад

Good to know!

@whatsup8464 2 года назад

Yep bet it pulls better

@Lazerironman Год назад

I will say with the metal piping it does tend to get hotter easier vs. silicone being more heat resistant, so it’s definitely a big trade off

@Drpepperkiller10 Год назад

Looking forward for more GTI content, been a while

@domiggy4455 Год назад

Where he go :(

@brian9807 2 года назад

Hey Hayden, Hope all been well. I’ve looked into the IE FMIC I’ve heard great things about them. They have a flow form technology that helps with the cooling. Only down side it will cost around 1k

@HaydenCroix 2 года назад

IE makes wonderful products and I’m sure you would be happy if you went that route. I will say though for the price with ARM ic is hard to beat.

@brian9807 2 года назад

@@HaydenCroix thanks for the feedback. I will look into ARM aswell to see which is best for the money. And as always hope all is well take care!

@doubledad1978 2 года назад

I've had my ARM FMIC for over a year and I suggest replacing all included clamps. I had 2 pipe blow offs until I changed clamps. 👌✅ Also sounds like your diverter whine is strong.. got me a GFB DV+ and issue was solved. Cheers

@HaydenCroix 2 года назад

Thanks for the heads up! And I have a new DV on order to hopefully solve that!

@rambow70 Год назад

What kind of clamps would your recommend instead? I'm shocked these blew off. There are two on each end and they looked pretty stout.

@StickitDecals 2 года назад

None the less. None the less. None the less. None the less. None the less. None the less.

@tredfxman 2 года назад

I did'nt buy an intercooler for my GTI Clubsport yet, as it costs an *ARM* & a Leg! 😄 👍

@johnmoser2689 2 года назад

nice

@PapiAndrey 2 года назад

They’re cheap on eBay

@johnmoser2689 2 года назад

@@PapiAndrey he was being punny

@PapiAndrey 2 года назад

@@johnmoser2689 man I don’t know how I missed that 😂

@Hennys_Mk7 Год назад

@@PapiAndrey send me a link lol

@Rommellollis 2 года назад

nice intercooler! you will definitely free up some ponies and your car will deliver more consistent performance, pull after pull. the best is always to log before & after IAT, boost etc...and actually see the difference. that way you definitely know it works. btw...when you boost...i hear this high pitch whistling noise. i had the same noise on my g6 gti and i eventually changed my intake...the noise was completely gone. not sure if it even bothers you, but i didn't like it at all

@kevinagostini-miranda961 2 года назад

I removed my front grille as well but I customized it. At first I cut it so I can leave the lower part of the grille in the bumper, I then cut of the mesh part of the grille and I was left with like the frame of the grille, that way it covers the exposed painted clips when removing the grille and it looks way cleaner

@HaydenCroix 2 года назад

The car now has a new grille installed.

@charlep3962 Год назад

@@HaydenCroix why you put the grill back on ?

@HaydenCroix Год назад

@@charlep3962 the bumper couldn’t withstand the downforce from the front lip without the support of the grille

@charlep3962 Год назад

@@HaydenCroix I’m planning on doing the delete for the look , so I should be fine ? Since I don’t have a front lip installed

@HaydenCroix Год назад

@@charlep3962 without a lip you will be all good

@drsnowmon Год назад

Anyone who's doing this, don't forget to unhook your battery before removing your front bumper. You risk messing up your front radar calibration which will cost you over $1400 only your VW dealer could fix

@treybodkin Год назад

7 months and no new videos or post on instagram? What’s going on? Miss the content! Picked up a mk7 gti myself 2 months ago, been wanting to see more content

@PierreCox97 2 года назад

Congrats on the intercooler dawg, it’s lookin pretty clean 🔥🔥 I haven’t missed the Mk7 yet but def want a black intercooler this time

@gregprevite8548 2 года назад

The silver intercooler core looks mean. I’d love something like this for my mk6r but all the cores seem to be smaller for the mk 6.

@tyeee3528 2 года назад

It’s been 3 months where ya been man?

@strikerm70 2 года назад

I have that one, the paint is going to chip like crazy, get ready to have to paint it. Works like a dream though.

@rambow70 Год назад

Your car looks great. Also I'm a fan of a plain silver intercooler. Just classic.

@andrew_barros 2 года назад

The metal tubing might look smaller on the outside, looked like you stretched the silicone pip over the outer of the metal. I'm willing to bet the smaller tubing has a very similiar inner diameter of the tube. effectively being the same piping. The added benefit of it being aluminum the air will also have better thermal cool flowing the pipe as well.

@PongLenis32 2 года назад

I haqve the CTS on right now and love it, no issues at all. I didnt know though that it was only rated for 450WHP. If I decide to go vortex I will probably pick one of these up! Stage 2 EQT for now, but had to do wheels suspension wrap and aero first. Might do the turbo swap next spring

@HaydenCroix 2 года назад

The CTS one will be fine for a stage 2 car even on e85. But yeah once you go vortex you may want to look into an upgrade depending on how much you plan to push it.

@TheMrec94 2 года назад

@@HaydenCroix my build is kind of backwards stage 1 powermax with forged internals and titanium valve springs and retainers. But stock dp and intercooler probably in the range of 370-380wheel tuner recommend the do88 know anyone using it on a upgraded turbo?

@HaydenCroix 2 года назад

@@TheMrec94 a lot of the EQT guys run the Do88 with hybrid turbos and even some that are running full frame upgrades with it.

@TheMrec94 2 года назад

@@HaydenCroix how's that big front mount been holding up? Install looks easier than the OEM location ones what's the price point one that one.

@HaydenCroix 2 года назад

@@TheMrec94 there is a link in the description to it, and it has been holding up great! And you are right the install was super easy! I would definitely recommend it.

@Pablanguillas Год назад

i miss your vids already man 😥

@ernestprice1837 2 года назад

Have you noticed any reduction in oil temperatures with the new intercooler? That would be a quick way to verify its more efficient compared to the old one.

@HaydenCroix 2 года назад

I have actually, I am running about 10 degrees Fahrenheit cooler!

@freddyreyes1783 8 месяцев назад

Miss the vids man ;(

@mygolfmk7209 2 года назад

Nice overview of the product. A couple of things. The ARM core is 3.25" thick. Vendors stating rated HP is not very useful without knowing how they arrived at the number. **Edit: Stated HP is worthless because there is no standard for determining it.** ARM states 700 hp and the next paragraph states that it's rated to handle 575 hp. Notwithstanding the HP value being meaningless, compared to the Vibrant 12810, which ARM is essentially a clone of, Vibrant claimed 550 hp.

@mazpr2025 8 месяцев назад

I hear a whistle during the pull. IE looks clean...

@ThisMoose 2 года назад

I got a Wagner FMIC on my Golf R and I'm not even planning on going beyond stage 1. Is it necessary, probably not. But hopefully it means that the car keeps on chugging for longer.

@BOOSTEDDUDE 8 месяцев назад

I was wondering if you upgraded your intercooler when I watched your turbo install video. This one is nice and awesome if you got it free from sponsor? It probably had you covered for a good bit more than the one it replaced. I like them silver but you could use a little more coverage over the intercooler so it isn't so exposed.

@scottrobertson307 2 года назад

I’m so stocked I just completed my 2016 Golf R stage 1 with a APR FMIC car rips 👍

@aldoalberto1609 2 месяца назад

I have the same intercooler in my gti stage 3, and it gets 499 whp. 👌

@burb17 2 года назад

How’d we arrive at this 50hp figure?

@HaydenCroix 2 года назад

Well we went from a 450 hp capable FMIC to a 700hp capable FMIC which opens the door for some more HP with tuning.

@burb17 2 года назад

@@HaydenCroix I was hoping for actual numbers haha. Like maybe I missed something.

@clutchthepearls3062 2 года назад

Same question I had. The title implies he actually measured before and after with a dyno, but no such luck. I already have the ARM FMIC, so I was hoping to see something good. Instead we just talking head vlog reading the ad.

@Deshawn240hz 2 года назад

I’ve had the arm intercooler for about 5 months now I couldn’t put the couplers on the back end only the big ones yea make sure you tighten them really tight they popped off on me

@Gotboost337 Год назад

Nice! I appreciate your videos. Looks killer, I’m trying to decide on a IC upgrade, unfortunately, ACC cars are screwed in the FMIC options. Any suggestions? Keep doing you bro. I like it silver, but w/grill

@HaydenCroix Год назад

Stock replacement intercooler will be you best option unless you want to delete acc

@davidkane8660 2 года назад

Hayden good video..... I've got one thing to say from my experience I think your dv is fubar. Look into the gfb go fast bits dv+ install. It's that little whine while on boost that's giving me this vibe...... Peace

@HaydenCroix 2 года назад

Already have an oem replacement on order!

@davidkane8660 2 года назад

OK that's cool is this the one that came with the turbski? You will gain power and responsiveness straight away from this too 💪

@HaydenCroix 2 года назад

@@davidkane8660 This is still the dv from my IS20, I swapped it to the TPC20

@davidkane8660 2 года назад

@@HaydenCroix sweet buddy hope you get it sorted. Ohhh with the hard pipes all you will ever need on the mqb platform will be 2+1/2 inch only if your aiming for 4 digit hp figs you then would need 3inch. Also look into the other boost hard pipes to replace the plastic oem ones that makes a big difference also.

@HaydenCroix 2 года назад

@@davidkane8660 Thanks for the advice! Always greatly appreciated!

@beastmeetbybeastexhaust835 2 года назад

Nice! I like how easy it is to install a FMIC on a GTI haha. My car has been done for a couple of weeks! No Dyno runs yet and custom street tune.

@HaydenCroix 2 года назад

Definitely a very easy install. And that’s awesome!

@beastmeetbybeastexhaust835 2 года назад

@@HaydenCroix Thanks bro

@ericking339 Год назад

Funny just found your channel, rocking the same wheels as you on my gti of the same color

@HaydenCroix Год назад

A man of great taste🤘

@DaseggMQB 2 года назад

Hey dude where are the mounting brackets on the ARM unit? I swear I couldn’t see them but probably wrong. I’ve got the CTS one as well, but definitely want to switch 🤙🏼

@HaydenCroix 2 года назад

It came with a separate bracket that bolts to the front shroud (the intercooler can also be flipped upside down

@DaseggMQB 2 года назад

@@HaydenCroix oh shit love that. Drilling the holes through the crash bar for the cts was not fun lol

@stevesanchez1975 2 года назад

I can’t wait to grab my IE V1 intercooler, my arm FMIC was great but I need sleeper in my life

@HaydenCroix 2 года назад

Can’t go wrong with IE!

@stevesanchez1975 2 года назад

@@HaydenCroix for 400 bucks I can’t complain

@nuffsaid6750 2 года назад

Nice just installed mine last weekend with the bottom grille delete.

@HaydenCroix 2 года назад

Very nice! I didn’t do the grill delete by choice, and 18-wheeler had a tire blow out as I was passing him and too my front grill with it🤣

@roymartinez25 Год назад

Hey. Brother when are we getting more videos been a minute, hope everything is well, take care.

@TheEnemy24 2 года назад

wow what a difference in size. Glad you are getting some spotlight and mfg are reaching out to you. would be nice to compare the fmic to the oem location from ARM. hint hint.. ARM. On the sim racing is that set up for PC?

@HaydenCroix 2 года назад

I use it for PC and Xbox. CarX on the PC and Forza on the Xbox

@raphaelfrancisco89 2 года назад

Looks awesome man! Out of 10 how hard do you think it is to install?

@HaydenCroix 2 года назад

Great question! I’d have to give the install a 3 out of 10 for difficulty on my scale.

@Telephototub46 2 года назад

Dawg our cars look exactly alike, only a few minor differences. Where’d you get the spoiler?

@HaydenCroix 2 года назад

It’s from ECS it’s their “Carbon Rear Hatch Spoiler”

@ByReClan Год назад

Hey Mate, car looks pretty sick. How did you get both angel eyes working on the GTI headlights? Or are they aftermarket ones? Cheers.

@HaydenCroix Год назад

These are aftermarket, they are made by ZMAUTOPARTS.

@mjspeedzone5532 Год назад

Must be nice to run the front mount. Mine has the bottom sensor😪

@beatmagician2914 2 года назад

How did you get the mounting brackets to fit? Can’t get the right side one to fit its slightly short?? Could you do a quick breakdown in the install

@HaydenCroix 2 года назад

The right one was tight but I was able to get it into place. Don't tighten the top screw until you have the IC mounted up.

@jd32k Год назад

Can i ask, whats everyones opinons on these small coolers vs the standard larger ones?

@LastHumansGarage 2 года назад

Thanks for the tips.

@absolutexk 2 года назад

I really want to like this intercooler. I think it looks great on our cars, but I have read that the pressure drop is slightly above average compared to most stock location IC. This concerns me.

@HaydenCroix 2 года назад

I did not notice any drop in psi

@absolutexk 2 года назад

@@HaydenCroix Right, however, usually pressure drop is compensated by the turbo. Meaning, the turbo may be pushing harder to meet the boost requirement due to the pressure drop. If the data is accurate, an independent tester tested a number of popular IC brands and found that the ARM IC had a drop between 3-4 PSI. Most stock location IC lose between 1-2.5 PSI.

@pedrorodrigueztube Год назад

Psi won't change what changes is spool time aka turbo lag

@igobyphillip Год назад

Nonetheless. Your car is insanely awesome!!

@NerdGenius 2 года назад

Stock location> FMIC

@jlenjordan2394 9 месяцев назад

Do they make one for a3/s3's or does that one fit them as well?

@FeefTheSloth 2 года назад

Whered you get your black badges, they look fire

@HaydenCroix 2 года назад

Etsy is the way!

@JacesOwnWorld 2 года назад

I actually own the CTS FMIC on my MK7 GTI too, and I have told myself that if I ever go with a bigger turbo (currently IS38), I would definitely be looking to buy the ARM FMIC or Bain Performance FMIC. Both are so much bigger, and just overall better FMIC’s.

@Tracksavvy Год назад

What about Neuspeed?

@brianb2454 2 года назад

Is that the only intercooler ARM makes? I also have an ARM FMIC I did not use the stencil even tho I bought it just cuz I like it clean looking. Mines been on for awhile now and still looks and performs great. Reason I’m asking is I had no idea it’s rated for that much power I got it cause it was no drill and decent price I also got there charge pipe upgrade there soft pipes are bigger then the hard pipes. I also left the mesh on my bumper. I diddnt even know I could take it all the way off

@HaydenCroix 2 года назад

As far as I know yes it is. And that’s great to know! I didn’t even know they offered options for pipes. And yeah I actually removed mine because an 18-wheeler had a tire blow out on me and it took the grill with it.

@SilkyWilly26 2 года назад

I heard a lot of negative thinks about a short mount intercooler, what are your opinions on it and how do you feel about it?

@HaydenCroix 2 года назад

It all depends which one you choose. Some are better than others but for the effort vs. a stock location replacement is what does it for me. A FMIC is a much easier install

@SilkyWilly26 2 года назад

@@HaydenCroix Thank you!

@teamheavensgate6639 Год назад

which version of the protune do you have by sneekytune im considering getting the kill/mexico tune but I daily drive my car. Curious which one you use to reach that amount of power and reliability.

@HaydenCroix Год назад

I run the kill file for a daily

@beatmagician2914 2 года назад

how does one remove the mesh grill that hides the intercooler, just ordered one and its coming tomorrow!

@HaydenCroix 2 года назад

It is not easy but there is several clips surrounding it that need to be undone from the inside

@miguelsanchez6465 2 года назад

love the car so cool!! wish 4 cylinders had a better exhaust sound

@HaydenCroix 2 года назад

Thanks! And you and me both!

@exothermal.sprocket Год назад

Look up Cobb Titanium cat back. /watch?v=YjONpLUmVfk Also APR has a good system, configurable for different loudness. Neither are raspy, have decent bark and bass, not obnoxiously loud.

@AsSaSsInKiNg981 Год назад

What’s your custom exhaust? I’m currently is38 with catless dp and still have the stock resonator

@HaydenCroix Год назад

I replaced the stock resonator with a vibrant ultra quiet and the rear muffler with 2 flowmaster super 10’s

@TaylorGroat 6 месяцев назад

Hey mate what bumper and skirts you running

@HaydenCroix 6 месяцев назад

They are both from ECS. But the side skirts were made by carbon cartel.

@allin4once Год назад

I admit first off that i didn’t listen to every word he spoke, but I am confused by the title. The title suggest that his CTS intercooler compared to the AMX intercooler was "ROBBING" him of 50HP. So i watched the video and heard nothing about HP differences, so was i suckered by a clickbait title, or did i miss something?

@cesarflores1529 Год назад

Hey man I installed this in my car and I have a cat back exhaust and knn air filter system but I haven’t got tune but when I installed it feel slow on the throttle and a “EPC” light came on the and my turbo is not working it’s not spooling up and not boost is being made. Any advice ?

@HaydenCroix Год назад

You clearly have a leak somewhere in the system. Make sure to check all the connections you’ve touched.

@jupiterz301 4 месяца назад

any reason why you sold the gti? just curious

@HaydenCroix 4 месяца назад

The wife and I had a baby and we needed something a bit bigger. The car was still mint when I sold it.

@cjgti_ 11 месяцев назад

What’s your wheel/tyre setup ?

@TheWildAikputaTree 2 года назад

I’m full e85 rx500 making 460whp on 29psi.. I run a cts intercooler and haven’t had any issues? I came across your channel but would be interested in the long term with the arm fmic

@HaydenCroix 2 года назад

You can definitely push the CTS to its limits as you have proven. This one will just allow for a bit more headway. I will definitely be making a long term review as well.

@OpenSourceSlayer Год назад

What did you use to remove the mesh in the grill? Looking to do this as well.

@HaydenCroix Год назад

Standard trim removal tools and some tough finger tips is all you need. It can take some time though, there is a ton of clips to undo.

@OpenSourceSlayer Год назад

@@HaydenCroix appreciate you my man. Have plans for any new content?

@RazzmanMK8 2 года назад

Hey Hayden, Long time no content

@GOODSATIVA 2 года назад

I got the same fmic it's been going strong for months now. I also I got a ghetto sim racing rig I play grand trismo 7 on PS4. I like your setup

@carloselacewell882 2 года назад

Do you still have that intercooler….

@prestonfields6642 2 года назад

Question on the hood how do u install the hood pin and where

@HaydenCroix 2 года назад

There is a video on the channel about it if you'd like to watch it, but I mounted them to the headlight support brackets. Otherwise it's just a lot of measuring before you cut, I used a "holedozer" to cut the hood after making my pilot hole.

@jordantran1434 2 года назад

Are those stock GTI headlights? Why do they look so good?

@HaydenCroix 2 года назад

Nope, they are zmautoparts.

@maxharris9861 Год назад

how do you get both “U”’s in the headlights to turn on? i have a mk7 gti and only 1 of the U’s on each side are on, not both

@HaydenCroix Год назад

These are aftermarket headlights

@maxharris9861 Год назад

@@HaydenCroix what’s the name of them? i’m really interested in getting them

@HaydenCroix Год назад

@@maxharris9861 mine were made by zmautoparts

@RafaelGonzalez4 Год назад

wont a bigger pipe require more air before it even starts to build pressure? more area to fill and pressure?

@HaydenCroix Год назад

If you were speaking about exhaust flow then yes. Back pressure is required to build boost. The larger size IC piping just allows more air into the engine to assist with a more free flowing exhaust to get that balance

@RafaelGonzalez4 Год назад

@@HaydenCroix IC piping allows more air, but you also have more area to fill with air, and more area to build pressure into, so there is more turbo lag? flow and pressure are two different things

@HaydenCroix Год назад

@@RafaelGonzalez4 more air means more boost. And it’s the exhaust back pressure that causes turbo lag. If you have larger IC and piping it does not affect back pressure or turbo lag.

@RafaelGonzalez4 Год назад

@@HaydenCroix i guess this is where am getting confused and hesitant about aftermarket IC piping, i know more air is equal to more boost, but doesnt larger IC piping( charge pipe, and throttle body pipe) mean that you now need a lot more air in the system to build that pressure?

@HaydenCroix Год назад

@@RafaelGonzalez4 I get where you are coming from, and I wouldn’t say you are wrong. But that’s because I’m sure if you put a big beefy IC in without being tuned for it you would probably experience lag. But as long as you get tuned for the IC you will not experience turbo lag from it even with a larger diameter of piping.

@melnickson Год назад

why haven't you posted?

@iemanduithetnoorden6643 2 года назад

How did you get your grill so shiney?

@HaydenCroix 2 года назад

If you are talking about the upper grill it's because I coated it in clear coat to make it gloss finish.

@Benihana81 2 года назад

Did you get a tune re-flash after installation?

@HaydenCroix 2 года назад

Not yet, though I will be getting a new revision soon.

@miamirice6840 7 дней назад

dyno???????

@johnw.9572 6 месяцев назад

Twin cooler will loose boost pressure and not worth it

@landofsyn2980 2 месяца назад

This dude alive? lol

@HaydenCroix 2 месяца назад

@@landofsyn2980 Haha yeah I’m still kicking. Just sold the GTI after the wife and I had our kid.

@FrankA-973 2 года назад

Can I stack this with a IE stock location intercooler ?

@HaydenCroix 2 года назад

With the correct piping yes

@stevesanchez1975 2 года назад

There isn’t a need too, it’ll just add extra weight .

@tylermitchell1672 2 года назад

Can I get ur old intercooler, would it work on my mk6 gti

@HaydenCroix 2 года назад

It has already been sold otherwise I would say yes!

@jayonefive234 2 года назад

you sound like stevemre

@luckyhands4995 2 года назад

Why didn't u use an oversized mqb location? No offense,but that front mount alone is robbing hp

@HaydenCroix 2 года назад

Simply because I didn’t want to go through installing an oem location one. Especially when this one is good for 700 which is well above my power goals.

@luckyhands4995 2 года назад

@@HaydenCroix fair enough. My mqb is my first car not having a front mount,but I'm only putting down 399 hp and 445 lbs.ft tq. Do u think in your situation an mqb would make a difference on a dyno at all?

@HaydenCroix 2 года назад

@@luckyhands4995 To be honest I’m not 100% sure but I know that in comparison to the CTS one I took off it is allowing for more power now. The car should be getting on a dyno soon, just have a few things to get sorted first.

@luckyhands4995 2 года назад

@@HaydenCroix sick can't wait to see,thanks!

@ventodanny 2 года назад

i am asking the old one cts one im in south africa

@trustme42018 Год назад

Are you gonna make anymore videos? Think we deserve an answer.

@HaydenCroix Год назад

Not around the GTI, I sold it a while back and am driving a Grand Cherokee SRT nowadays.

@johnmoser2689 2 года назад

it made me cringe how close you came to the curb with the brand new intercooler

@HaydenCroix 2 года назад

Me too!

@jamesl3076 Год назад

What radar are you using?

@HaydenCroix Год назад

Uniden r3

@Neverworry21 Год назад

Dude what happened??😢

@achudathanshiju5720 2 года назад

Hey bro you wanna sell that cts ones ?

@HaydenCroix 2 года назад

It’s already been sold

@achudathanshiju5720 2 года назад

@@HaydenCroix i thought so lol

@tredfxman 2 года назад

I did'nt buy an intercooler for my GTI Clubsport yet, as it costs an *ARM* & a Leg! 😄 👍 (One thing though your camera is MUCH more jumpy than the regular youtuber, so if i were you i would get a stabilizer like DJI Ozmo or similar for your phone. Its very though to watch when its this jumpy..)

@HaydenCroix 2 года назад

I do have an Ozmo for the phone but I film on my Canon. I will have to look into getting a ronin or something similar because I have noticed the shake as well, even with max stabilization it’s still pretty bad.

@Bted__ever 2 года назад

Stop being a little girl, the video was really that hard to watch? Get over yourself! 🤣

@GOODSATIVA Год назад

Wya miss your uploads Hope u didn't sell it

@HaydenCroix Год назад

I ended up letting her go. I appreciate the support you always gave, you were a day one! I sold it though because I had a baby and the GTI just did not work well for my current situation. I plan to get back into a mk8 in the future though.

@salsam3778 2 года назад

Post more vids bro been 2 montgs

@HaydenCroix 2 года назад

I will be soon! Just been super busy with work/have a baby on the way due in October so been getting things ready.

@Chris-qq1yq Год назад

Hope everything’s going good with the new family an everything. I have a build similar to yours only difference is xl eqt. Everyone misses your content keep us posted. Peace brother

@COMotorsports 2 года назад

Holy click bait title. Lol

@HaydenCroix 2 года назад

Thanks for watching!

@COMotorsports 2 года назад

@@HaydenCroix the click bait will keep me away unfortunately.

@HaydenCroix 2 года назад

@@COMotorsports As will a poor attitude, I was a fan. Thanks for the info though.

@COMotorsports 2 года назад

@@HaydenCroix I'm not sure I follow. I'm just providing some feedback. Nothing to do with a poor attitude.

@brogu6071 Месяц назад

Did you blow it up? Is that why you stopped posting?

@HaydenCroix Месяц назад

@@brogu6071 nope, had a kid and needed something bigger. Sold the gti and bought a trackhawk

@brogu6071 Месяц назад

@@HaydenCroix fuck yeah man. Congraulations. I'm about to trade my 9th gen Si in for a mk7.5 GTI

@EastDallasKicks 22 дня назад

Have you ran any explorer st?@@HaydenCroix

@mariorflores7299 2 года назад

Why change the CTS for ARM, ARM is the best CTS

@HaydenCroix 2 года назад

The CTS FMIC is only rated for 450 hp and became a choke point in the tuning process for more power. This ARM one is a much larger core allowing for more air and in the end more power from the tune. If I could go back I would have done ARM from the start as the install is much easier.

@mariorflores7299 2 года назад

@@HaydenCroix My thought is to install an I38 later and stay until there. At the moment, it has the factory one, but I want to mount an intercooler and I don't know if CTS or ARM, what do you recommend?

@HaydenCroix 2 года назад

@@mariorflores7299 ARM 100%

@mariorflores7299 2 года назад

@@HaydenCroix ok Thank you.

@luckyhands4995 2 года назад

Mqb locations are best for ic, "coolness" over performance at its finest