Tile Redi Shower Pan REAL TIME Install, Less Than 20 Minutes

Подписаться 2,6 тыс.

Просмотров 55 тыс.

50% 1

Some people don't believe our product can be installed in 30 minutes or less, so we filmed a real time install of the Tile Redi shower pan, being completed by 2 installers in 19 min 24 sec.
Tile Redi offers the ONLY leakproof, one-piece shower pan with integrated drain on the market that's ready for tile!
Made in the USA 🇺🇸
Feature List
✅ Leak Proof - Manufactured as one piece with integrated drain to ensure water proofing.
✅ Pre-Pitched - No need to worry about making sure your mud bed is pitched, we've got you covered.
✅ Integrated Drain - Peace of mind that the drain connection won't leak.
✅ Customize - With Redi Your Way®, any size, any drain location, as many or few curb(s), one entrance or multiple entrances, raised or lowered splash walls, basically, if you can dream it, we can build it!
✅ ~8x Faster to Install - 30 minutes or less is all you need, compared to hours with our competitors.
✅ Easy & Lightweight - Carried and placed by one person, reducing the total time needed on site.
✅ USA-Made - Made and warehoused at our factory in Indiana with no supply chain issues.
✅ Fast Shipping - Order today and It's shipped within 3 days on most products.
✅ Complimentary Products - From benches to niches and ledges to drains complete your shower easily.
Learn More at
tileredi.com/

Хобби

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@johnh4679 9 месяцев назад

You might not like it, but this what peak male athleticism looks like.

@mrs.i.one12 3 месяца назад

Me and my husband installed one in our spare bathroom yesterday . Followed the directions and today it’s solid as a rock! Thank you so much. I will recommend this to everyone I know!!

@TileRedi_US 3 месяца назад

Great to hear!

@thedon98677 15 дней назад

Now grab some DIY guys, and have them do this on a concrete subfloor with the need to be 100% precise and fast as crap to get the drain connection done before the glue set up!

@querty292 2 месяца назад

We really need one that doesn’t require the mortar mess

@SMS38i 26 дней назад

Based on their most recent video, they have one. The custom and commercial ones are flat bottom, set in thinset, based on the new video

@mightyluv Год назад

I was a bit worried about doing the mortar part of the installation; thanks for posting this.

@wc6975 9 месяцев назад

how do you install the drain connection if you do not have access from below?????

@davidgapp1457 4 месяца назад

It means you have to get the drain pipe lined up precisely with the hole in shower pan BEFORE you lay down the mortar. So typically you do this before laying down the floor on a new install, but if you're upgrading your shower and the new pan does not align with the old drain, then you'll need to access the drain piping (typically by removing sections of the floor which you'll need to replace later). I would not use the method shown in this video for creating the necessary mortar bed.

@paulmeyer7530 10 месяцев назад

Amateur here ... not a pro. I might have added some foam blocks between the studs and a temporary curb to sort of 'contain' the mud, but it looks like it didn't flow off the pad the way I thought it would. Nice!

@garybaugh8302 Год назад

If so how many 80lbs bags did it take?

@sthrnvoice3198 3 дня назад

I’m not trying to be stupid here, but what exactly is the purpose of checking level on random wall studs three feet up from where the pan is going to be? I’ve seen it in two different videos… I am officially bewildered

@garybaugh8302 Год назад

What was the size of pan 72"×36" ?

@ikediamond 5 месяцев назад

That’s a big step into the shower

@TileRedi_US 5 месяцев назад

Our curbs are usually 4.5" high. If you prefer a zero entry shower pan we also offer our Barrier Free pans. We can also accommodate custom curb heights if desired using our Redi Your Way shower pans.

@brentdreisbach6829 5 месяцев назад

@TileRedi_US I have a question re: your instructions. My maximum rib depth is 2" at the end away from the drain. Instructions say mortar bed should be max depth (2") minus 1/2". Question is, should the mortar depth be 1 1/2" all the way to the drain, or should the mortar bed be sloped to match the rib depth minus 1/2" all the way to the drain? Near the drain, the ribs are only 1/2" deep, so a 1 1/2" mortar bed won't allow for the pan to set level.

@TileRedi_US 5 месяцев назад

The mortar bed should be ½ inch less than the deepest rib under the entire pan except for under the drain, staying 1 inch away from the side walls. Only put ½ inch of mortar under the drain where the ribs are shallow (from the front of the drain to the wall). Feel free to call us if you have additional questions: 954.323.0125 ext. 212.

@DavidLee-vu2bc 9 месяцев назад

What is the black sheeting you are putting down onto the plywood before installing the mortar?

@TileRedi_US 7 месяцев назад

It's a layer of black tar paper on the subfloor.

@mrs.i.one12 4 месяца назад

Is it mortar mix or what mix are you using I ordered a shower pan and am ready to install but I don’t know what you’re using thanks in advance

@TileRedi_US 4 месяца назад

Type N or Type S Mortar needs to be used to set the pan.

@IPlead5 4 месяца назад

Um, this is the simple part. How about connecting the drain that would be stubbed through the floor?

@TileRedi_US 4 месяца назад

It's not difficult. You can view TileCoach's video on the drain connection here: ru-vid.com4yoJbod1mUE?si=lAtRdiCbSLYrzUTx

@jeanettecrabb1713 3 месяца назад

Are the screws going above the pan to temporarily hold it in place?

@TileRedi_US 3 месяца назад

Yes, they should be screwed above the splash wall and not through the pan. The idea behind this is to hold in place so the pan will not shift as the mortar cures.

@jeanettecrabb1713 3 месяца назад

I see the two bags i got wont be nearly enough

@mrs.i.one12 4 месяца назад

What kind of mortar mix is it I can’t tell please name what kind you’re using.

@TileRedi_US 4 месяца назад

Type N or Type S Mortar needs to be used to set the pan.

@dubi7879 6 месяцев назад

sorry but i dont see a 20 minute install. i see two guys with all pmaterials prepped and stocked. at bare minimum its labor x2 for time. decent video though. did you charge 20 minutes for the install or how did you work your labor ticket?

@sanjivpatel6866 9 месяцев назад

So, I watched the video and noticed that there seems to be a black, thick substance before the cement steps. Do you think it could be the shower pan liner?

@TileRedi_US 7 месяцев назад

It's a black tar paper used on the subfloor.

@midwest9757 6 месяцев назад

@@TileRedi_USwhat is the purpose of doing that?

@kenhoward127 5 месяцев назад

@@midwest9757 To prevent the wood subfloor from absorbing all the moisture from the mortar.

@JPTX80 5 месяцев назад

@midwest9757 A vapor barrier to separate the moisture from the mortar bed and the wood subfloor

@ByronPoindexter-un8vh 5 месяцев назад

@@midwest9757it keeps the water from the mortar from soaking into the subfloor and causing the mortar to dry too fast and not cure properly.

@bgBlea 6 месяцев назад

why is the tar paper needed? can't you use a damp sponge on the plywood before setting the mortar or would the plywood absorb too much water regardless?

@TileRedi_US 5 месяцев назад

Roofing paper is recommended so that the subfloor doesn’t absorb moisture from the mortar bed.

@davidgapp1457 4 месяца назад

@@TileRedi_USIt is also a good idea to decouple the shower pan from the floor. Tiny movements induced by thermal stress and flexing are relieved by decoupling the subfloor from the mortar. Plus, should you ever need or desire to replace your shower, a decoupling layer will make replacement much simpler.

@mrs.i.one12 4 месяца назад

What size drain?

@TileRedi_US 4 месяца назад

Our drain hub fits into a standard 2" drain pipe.

@h2oespi541 Год назад

So tile redi first then backer board / cement board?

@brehoffm Год назад

Yes, pan first then backer board per the instructions. The outer edge of the pan is .5” to accommodate the backer board, then your tile will go over both seamlessly.

@TileRedi_US 11 месяцев назад

Yes, your wall boards will go mounted on the pan splash wall.

@jacobcairnes521 Год назад

Now, what goes on the walls?

@TileRedi_US 11 месяцев назад

We've recently launched our new product Redi Wall which are waterproof wall boards that sit on the shower pan splash walls.

@jl456 6 месяцев назад

Why such a large step to get into the shower seems like too much

@TileRedi_US 5 месяцев назад

The height of our standard shower pans curbs are 4.5" high. Zero entry pans can be found on our website under Barrier Free shower pans. We can also accommodate any desired curb height with our custom Redi Your Way pans.

@charlesbutterfield995 5 месяцев назад

This this is a really BAD video. There is no audio commentary and no captions so much of the activity is just puzzling. For example is the mortar bed supposed to be flat or sloped. The written instructions that come with a product are confusing on that point and a silent movie of 2 guys in hurry doesn't provide any answers

@TileRedi_US 5 месяцев назад

Thanks for your feedback. This video was posted on RU-vid to simply provide some backup to our statement that a shower pan can be installed in 20 minutes. We have our other installation videos that provide complete audio commentary with tips along the way for proper installation. We apologize if this video caused some confusion, the general idea was to show the entire process from beginning to end.