Tiny House Build Steel Frame Install

Подписаться 1 тыс.

Просмотров 36 тыс.

50% 1

In this video we install the Steel Frame walls of our Tiny House, and also get the wall wrap (sarking) installed. We give a general overview of how to get the walls installed and our method for fixing the wall wrap. We show you how to build a tiny house and some of the Tip & Tricks we use to make the process easy, and traps to look out for as we make living in your tiny house possible.
Hope you subscribe and follow along with us in our Tiny House Build.
Please leave your comments and suggestions for future video's.
🔴 Subscribe Here: / @lifestylecabinsunplugged
www.lifestylecabins.com.au
#Tinyhouseonwheels #tinyhouse #Lifestylecabins
Follow us on Instagram: / lifestyle_cabins_unplu...
Follow us on Facebook: / lifestyle-cabins-unplu...
🎬Watch our most recent videos: / @lifestylecabinsunplugged
Visit our on our website: www.lifestylecabins.com.au
Please subscribe for more videos on our very first tiny house, design, and sustainable, off-grid living.
To view this completed design, please visit our website at: lifestylecabins.com.au/warra-...
More designs:
The Bowen: lifestylecabins.com.au/bowen-...
The Fraser Coast: lifestylecabins.com.au/fraser...

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@Jjakkelly 4 года назад

So cool to see how the frames are actually made!

@LifestyleCabinsunplugged 4 года назад

Hi Jak, I know, really interesting !

@handy-remodeler 2 года назад

Awesomeness!

@ryanomoso7173 3 года назад

Very nice, I am actually currently building a diy tiny house using metal studs and tracks. Video is also coming up to be uploaded.

@anitaburanis-papadatos3898 4 года назад

That’s amazing 👌

@LifestyleCabinsunplugged 4 года назад

Thanks Anita :)

@FrameMac-LGS 11 месяцев назад

A good building is inseparable from a good light steel structure design equipment FrameMac LGS is here for change

@AnotherCritic100 2 года назад

Considering constant road vibration, are there special screws used to join the frame that wont back out while towing this house from location to location?

@daniielaoberreiter3411 3 года назад

Hey guys great that you are making those videos. I also decided to make it with steel. Here in Austria, they like to do it with wood and so i do have a Question: How did you fix the steelframe on the multiplex-board on the floor? Danke =)

@LifestyleCabinsunplugged 3 года назад

Hi Danke, our design is engineer certified and they specified the size/type and spacing of the fixings. Basically we used a metal roof tech screw into the frame. They are spaced at every 500mm and at each side of every opening (door etc) and frame join. Hope this helps, regards Ross

@b1e1a1u 3 года назад

wow great video series. thanks for sharing! we are starting our 8X2.4 tiny build in January. Can you tell me how you attached the steel framing to the trailer? did your framing company supply all the fixings and advise how to secure it? Also if you don't mind would you be willing to tell us the approximate cost of your steel frame? Thanks heaps and really appreciate it! Beau.

@LifestyleCabinsunplugged 3 года назад

Hi Beau, Thanks for the great comments. We did a complete design and had Engineering approval done. After that we gave it to our steel frame manufacturer who made to our specifications. The engineer specified the size / type of fixings (10g metal screws) which are screwed through the steel trailer frame on each side of every wall stud and every 600mm. All the wall sections and roof are attached in the same manor. Depending on your design, I would budget about AUD $5000 - $6000 for the frame. Where are you located ? As we are also starting to build Tiny Houses to order. Regards Ross

@b1e1a1u 3 года назад

@@LifestyleCabinsunplugged Cheers Ross... appreciate that. We are down south and already in the process of sharing our plans with a few steel framing companies at the moment. Thanks again and ill let you know how it goes. Keep the videos coming!

@xxxsinanizm 3 года назад

What is the material of the profiles?

@nesbitttom Год назад

What size material are you using? is it 25 gauge or 20 gauge??? is it 4" or 3-5/8" or ???? what type screws are you using ???

@loopperson8836 Год назад

I saw one video use 18 gauge via an engineer suggested it. thicker/stronger

@baileycosgrove60 3 года назад

What spray adhesive did you use?

@LifestyleCabinsunplugged 3 года назад

HI Bailey, we used Contact Adhesive and spayed from a automotive spray paint gun.

@lost_ducks 3 года назад

plz tell what gauge steel is your framing? ty

@LifestyleCabinsunplugged 3 года назад

Hi Antonia, I’m not sure of the steel gauge, it’s the same as what’s used for standard house frames. We have had an engineer certify the design to Australian standards. Regards Ross

@lost_ducks 3 года назад

@@LifestyleCabinsunplugged ty

@MarcumUP Год назад

@@lost_ducks thats a dick move ..just tell us what gauge.. that response guarantees im no using your site ... at all

@wilsontan887 2 года назад

Excuse my ignorance, I was wondering why didn't you go to a steel manufacture-i.e: blue scope steel, and just frame it yourself at home?

@LifestyleCabinsunplugged 2 года назад

Hi Wilson, that would be an option but would take sooo much longer to do. The nice thing about the CAD based cutting machine is that automatically cuts all the pieces to the correct size.

@wilsontan887 2 года назад

@@LifestyleCabinsunplugged Thank you, that would make sense. I work mainly on building sites, and we never use a CAD cutting machine- as they just come delivered in standard lengths, but if that's the case, I wouldn't be surprised if it's implemented on-site for strictly customized projects. Out of curiosity how long did it take them to manufacture all the frames? Normally something like that on-site would take 2 men a maximum of 1 day. You did an excellent job, and I've watched all your videos. I'll be keen for the final stretch videos of the fit-off and finishes. Glad I found your channel because I'm building my caravan the exact same way. The only thing I haven't confirmed is whether to bolt, weld, or screw the frame onto the chassis as you have done. I'll be testing it myself with its shearing capacity because I can't find anything online about it.