No video :(

Tips + Tricks launching AL hard floor inflatable boat with the DIY transom launching wheels.

Подписаться 4,5 тыс.

Просмотров 537 тыс.

50% 1

This is how I launch my inflatable boat with my new DIY Launching wheels. I like the aluminum flooring on this boat because it is very stable and safe. I have no problem standing on it while fishing. However the aluminum flooring is also pain to setup on site. In this video I will share with you my tips and trick to setup if you have the similar boat.
This is the video for how to make the DIY launching wheels • DIY boat launching whe...
I only made the DIY the launching wheels as I have most material available. You may consider just buy a kit instead. This one seems good. amzn.to/33OJwBR
The D rings that I have installed on the Al floor amzn.to/2MKbNnr
This is the air pump to inflate the boat amzn.to/2vTigSr
The 12v SLA battery that I use with the pump amzn.to/2nKgSwT
Can’t go wrong with the Minn Kota Endura trolling motor amzn.to/2wJ87aI mine is over 10years old
I am using this 12v deep cycle battery for my trolling motor now. amzn.to/2OJlFtY
This is the similar boat I have amzn.to/3j5Is2E
Support the channel amzn.to/3ahIEwB
Contact and web info
Email: hypergauge@gmail.com
Website: www.hypergauge...
IG: / hypergauge
Hypergauge Chanel: / hypergaugediy
Outdoor DNA Channel: / outdoordna
Disclaimer: Links above may contain Amazon product affiliate links

Опубликовано:

5 сен 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@garcianet1 4 года назад

thank you so much, I was debating on this isses for weeks, I have a movility disability (DAV) and limited space so you idea and video encourage me to go out and enjoy the sea. no more depress myself at home.. thank you for showing me this liberty. God bless you. from Puerto Rico

@HypergaugeDIY 4 года назад

Thank you for watching video. Have fun and be safe out there.

@lamarrm5300 3 года назад

Thanks for posting! I had no idea how to launch one of these boats. This looks so much easier and safer than what I would have tried to do.

@HypergaugeDIY 3 года назад

Thanks for watching my video. Have fun and be safe out there. 👍

@Shootemfulloholes 3 года назад

DUDE so i have been thinking of buying a 10 ft inflatable boat with trolling motor for fishing tired of the trailer and all that, this video helped me a ton in thinking how it should all work easier, thanks for all the tips and making the video.

@HypergaugeDIY 3 года назад

Thanks for watching my video. Have fun out there. 👍

@vbl20012k7 Год назад

Awesome. I'd really like the way you set wheels & d-rings on your boat: smart. That saves a lot of time & "energy" to unload a boat & load it. Definitely I'll do the same when I have an inflatable boat as you do. Again thank a lot for sharing your tips via your video clip.

@HypergaugeDIY Год назад

Thanks for watching my video. Glad you like it. 👍

@charleswilliams1127 4 года назад

I just bought a 12 footinflaeable w aluminum floors What a pain in the a** Definitelygoing to add the d rings Thanks for the tip

@HypergaugeDIY 4 года назад

Thanks for watching my video. AL floors is a little bit hard to install but IMO it is definitely worth it. I am able to added a lot more accessories on it, and it is very stable while fishing. I am sure you will get better on the installation. Have fun and be safe out in the water.

@charleswilliams1127 4 года назад

I sure hope it get easier lol

@jimkirk41 4 года назад

d ring suggestion a lifesaver. great video. thanks.

@HypergaugeDIY 4 года назад

Thanks for watching my video. Glad it helped!

@eliasoeliaso4493 4 года назад

One of the best videos I've seen on the subject. I hope I can find other similar ones in your channel. Thanks for giving us useful idea. Salaam Alaykium from Arabia.

@HypergaugeDIY 4 года назад

Thank you for watching my video. Your comments make my day. Cheers.

@yoonsoo9 3 года назад

very nice video! Learning everyday!

@HypergaugeDIY 3 года назад

Thanks for watching my video. Cheers. 👍

@samuelhelderman 3 года назад

I just watched your vid and subbed.

@HypergaugeDIY 3 года назад

Thank you. 🚀👍

@alextran272 2 года назад

Good video Erick 👍 Let go fishing buddy.

@HypergaugeDIY 2 года назад

👍Let's go.

@gabicoful 3 года назад

awesome video!!! you are a pro!! i need to get those wheels on my inflatable boat

@HypergaugeDIY 3 года назад

Thanks 😊. If you are interested to DIY it. This video is my build detail for your reference. Have fun! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-k1NPm-znLVI.html

@defomatt2684 4 года назад

Well done my friend. Great job

@HypergaugeDIY 4 года назад

Thank you! Cheers!

@cassmarkonthemove 2 года назад

Good thinking!!!!

@HypergaugeDIY 2 года назад

Thanks for watching my video. 👍

@jaketaylor5754 3 года назад

Very clever!!

@HypergaugeDIY 3 года назад

Thank you for watching my video. Cheers.

@BBBYpsi 4 года назад

Excellent modifications. May I suggest putting a seat onto a few 2 x 4 screwed together.

@HypergaugeDIY 4 года назад

Thanks for watching the video. That is an interesting idea. I am sure some application will have a good use for it. The consideration is how to keep the storage space small after the boat is deflated.

@phil20_20 2 года назад

Good Job! 👍👍

@HypergaugeDIY 2 года назад

Glad you like it. Thanks 👍

@drgreen111 2 года назад

The channels with holes where to buy harbor freight I know has wheels. Good heavy duty stuff my friend.

@HypergaugeDIY 2 года назад

Thanks for watching my video. You should be able to buy them from your local hardware store. I got mine from Home Depot. 👍

@123boat 5 лет назад

Really well made video. Looking forward to watching more 😃👍🍺

@HypergaugeDIY 5 лет назад

Thank you for watching my videos.

@hntrains2 Год назад

Do you put the boat anywhere to dry when you get home of keep it wet in the car until the next time you take the boat to the water?

@HypergaugeDIY Год назад

Yes, after deflated the boat I will let it dry in the yard before storage.

@zhenzhenyouyu2776 2 года назад

Great! I subscribed to your channel! I'm in shipbuilding

@HypergaugeDIY 2 года назад

Thank you. Good luck with your adventure. 👍

@denden3397 3 года назад

Nice job 👌

@HypergaugeDIY 3 года назад

Thank you! Cheers!👍

@vandinh6170 3 года назад

Thank you for helpful video. Save me lot of time with your idea of 2 chain attached to metal floor. I have question for you, as yoour recommended i bought a electric pump as you and now i am looking for adapter to connect pump horse to dinghy air port? what adapter you use?, all adapter they provided not fit at all. Thanks again.

@HypergaugeDIY 3 года назад

Thanks for watching my video. I am sure your boat spec should have told you the kind of air intake valve you are using. My air head pump already came with the proper connector for my boat. It is common for most inflatable boat to use this kind of valve connector amzn.to/2UIoHau However, you may want to check with your boat builder for proper spec. Good luck and be safe out there. 👍

@pherrishill2570 4 года назад

Great job mate. Really well done 👍

@HypergaugeDIY 4 года назад

Thank you! Cheers!

@ericrichards9471 2 года назад

Awesome video. I have an inflatable as well, 12.5 foot with aluminum floors like yours and have wheels on the back too. Can you explain the purpose of the cords you have bolted to the floor?

@HypergaugeDIY 2 года назад

It is to pull the AL boards tighter together so the end board can be installed easily.

@yqma1964 5 лет назад

great video and very helpful. I have a 10.5ft inflatable with Aluminum floor. tired of setting up every time going out. I will certainly try your way in the coming summer.

@HypergaugeDIY 5 лет назад

Thank you.

@fabiofmaia2011 3 года назад

Fantastic!

@HypergaugeDIY 3 года назад

Thank you. Glad you like it!👍

@wallstreet3770 2 года назад

thanks

@HypergaugeDIY 2 года назад

Thanks for watching my video. 👍

@indigofishermen 5 лет назад

Thanks for the vid. Very helpful. Keep it up!! HOOK EM!!

@haciendadad 3 года назад

First time I saw a video on YT and I wanted to like it multiple times. Great video! How would you set up a transducer? Over the side?

@HypergaugeDIY 3 года назад

Glad you like the video. My transducer is mounted under the trolling motor. 👍

@ChimpChampChump 5 лет назад

Good job. So much cheaper and portable than using a trailer😁

@HypergaugeDIY 5 лет назад

Thank you for watching my videos.

@yeisonx 4 года назад

Nice video, thanks for sharing!

@HypergaugeDIY 4 года назад

Thanks for watching my video.

@benhechter2929 5 лет назад

Great video - you are a pro!

@HypergaugeDIY 5 лет назад

Thank you.

@markweatherall7437 2 года назад

Fantastic video, thank you for sharing. How far down approximately in inches does your 12v trolling motor/prop sit in the water when your trolling?

@HypergaugeDIY 2 года назад

I normally keep the prop about 1ft under the water. I do get it higher if I am going through some shallow water or a big weed bed.

@markweatherall7437 2 года назад

@@HypergaugeDIY Thank you for your reply, much appreciated 🙏

@antoncapanda2363 4 месяца назад

Hi, how long was the perforated profile? Thank you

@HypergaugeDIY 4 месяца назад

For what?my boat is 9.5ft long inflated. Deflated can be folded down to smallest around 3x4x2ft.

@77cambo77 5 лет назад

Awesome video mate 👍

@HypergaugeDIY 5 лет назад

Thank you for watching my videos.

@JayHernan 4 года назад

Great video! Thanks!

@HypergaugeDIY 4 года назад

Thanks for watching my video. Glad you liked it!

@davidj7607 3 года назад

How heavy is your boat when you pull it out of the water? My boat is 175lbs without a motor at this time, not sure if I can pull it out of the water... can I tie it to my car hitch and pull it out that way? Sorry first time boat owner... thx

@HypergaugeDIY 3 года назад

My boat with gears, motor and battery is estimated around 160lbs. Empty just boat is around 90lbs and I can pull it out of the water by myself. Going up the ramp will take a lot more, that is why I drove my van down to pick it up. I think you can try pull it out of the water very slowly with your car, but should never try to tow it for distance. Have fun and be safe out there. 👍

@rafaelbarchiesi8806 4 года назад

Excelente video como va tu experiencia con el Bim en estos años? como navega? cual es tu experiencia lo bueno y lo malo?, gracias

@HypergaugeDIY 4 года назад

Thanks for watching my video. I mainly using this boat for fishing in small lake and shallow river. Navigation is very easy, and I can always use Google map to find my way if needed. Enjoy your boat out there. Be safe.

@amrhosny2427 4 года назад

Many thanks

@HypergaugeDIY 4 года назад

Thank you for watching my videos. So nice of you

@BalkTutkusu 5 лет назад

Thanks for the diy wheels idea, i'm gonna do the same very soon.

@HypergaugeDIY 5 лет назад

Thank you for watching my videos. This is the video showing the build detail for the launch wheel. Hope it help. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-k1NPm-znLVI.html

@christopherquick9707 3 года назад

Awesome where did you get the flooring material from and what is it exactly called that is an awesome.idea better than treated ply.

@HypergaugeDIY 3 года назад

My Aluminum floor is came with the boat. There are many different offering from different vendors, just check with them and pick the type you like. Have fun and be safe out in the water.

@christopherquick9707 3 года назад

@@HypergaugeDIY awesome thank you for replying and your time

@johnnyclaimerhaddadin195 3 года назад

Nice set up. You did a good job. Question. Do you usually keep the flooring in your inflatable? I just bought one today but the flooring is wooden but very similar set up. Also thinking of getting wheels too. I purchased oars today but I notice you have a trolling motor. Was thinking of getting that or maybe a 4hp 2 stroke engine. Your thoughts?

@HypergaugeDIY 3 года назад

Yes. I usually keep the AL flooring in the boat when storage. I have both electric trolling motor and a 5hp outboard. Most of the lakes near my home allow electric outboard only so I do use the electric motor more often. In a normal not windy day, the electric motor is nice and quiet, very simple and clean to use. I only use the 5hp motor for river and some time for the bay. Be safe and have fun out there. 👍

@TOOPAA 3 года назад

Thanks for sharing. I really like your setup. Could you please let me know where I can find the airpump like yours?

@HypergaugeDIY 3 года назад

Thanks for watching my video. This is the pump I used amzn.to/2vTigSr Very reliable little pump. This is my review for it a few years ago. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QYEk6W9UtMU.html

@thatonebeone 3 года назад

nice looking to get a small boat like this.. how do you register it to DMV? do you need to buy a boat that has information paper work thats certified ?

@HypergaugeDIY 3 года назад

Thanks for watching my video. It is not that hard to register once you know. All you need is to provide an official purchase receipt, make model and the serial number. If you are going to an office near a large water, the DMV office there should know what to do. Best luck with your project. 👍

@calvinshum8019 2 года назад

Thank you for your video. How do you store your inflatable at home? Do you fully disassemble it? Do you still have your boat?

@HypergaugeDIY 2 года назад

Yes, I still have the boat. As I still use it often, I store it deflated but keep the floorboard installed. So it is kind of flat and leans against the wall.

@calvinshum8019 2 года назад

@@HypergaugeDIY thanks for your reply. I am glad that you still have the boat. From your experience, is it safe to drive the inflatable boat to the deep ocean? I have a inflatable boat similar to yours and am thinking to catch some mud crabs.

@HypergaugeDIY 2 года назад

@@calvinshum8019 My boat is definitely not safe for open ocean with wave. The ocean water I tried is protected bay in a nice claim day close to shore.

@palgong_housing_service 2 месяца назад

@@HypergaugeDIY does the deflated boat with aluminum board installed unstable? I mean can I move deflated boat without collapse? I want to transport the boat install the equipment as much as possible so that I dont waste time and effort. I have longer van seats removed.

@HypergaugeDIY 2 месяца назад

@@palgong_housing_service The boat after deflated is not strong enough to add extra weight for transportation.

@rafaelzamudio217 2 года назад

Hi quick question, how did you drill the D rings to the floor?

@HypergaugeDIY 2 года назад

Put the D-ring brackets on the flooring and mark the screw holes, then drill with a proper size bit. The AL floor is very easy to drill, any type of bit will work. Just go slow. Good luck with your projects. 👍

@misterchinn 3 года назад

Hey! Great video. I've been deciding between an aluminum floor or an air deck. Your D ring idea might push me towards the Al! Do you have any pictures or video of the D-ring install? Thanks so much!

@HypergaugeDIY 3 года назад

Thanks for watching my video. To install the D ring I first setup the boat with the floor boards, then mark where I would like to drill the holes for the installation. Then take down the boards and drill the holes. Make sure to clean the hole with file. Use round head or flat head bolts to secure the D rings. Hope these help. Good luck and have fun out there.

@DaBinChe 3 года назад

I'm getting a similar setup.

@HypergaugeDIY 3 года назад

Have fun with your new toy. Be safe out in the water. 👍

@mikeklungland8170 5 лет назад

You have great videos, thanks. Can you post the build of your PVC roller bar? Thanks so much.

@1upgreenshroon 5 лет назад

Thanks for posting! How is it using just the trolling motor and no outboard?

@HypergaugeDIY 5 лет назад

Thank you for watching my videos. Most of the lakes in my area only allow electric motor. Actually the 32 lbs thrust trolling motor seems perfect for my small boat in these small lakes.

@vinhha3857 4 года назад

Hello Sir I’m really like the way this set up,, may you answer me 2 question.. first.. how long the electric motor last...??? I mean running time... 2nd do I need a boat license ...??? Thank you Sir ... please enjoy... I’m really want that set up for my fishing gear...

@HypergaugeDIY 4 года назад

Thank you for watching my video. I never tested the max hour my 100AH battery can drive my motor. The longest continue use I have is about 2 hr in a 7 hours fishing trip. At the end my battery still have about half of the power left. The performance is really depended on the motor type and your battery quality. Here in California you need to register your boat if you plan to put motor on it.

@vinhha3857 4 года назад

Thank you Sir

@arian40 4 года назад

Can you please let me know if you need a license or an insurance for inflatable boat for UK "SEA" like southend on sea? I checked everywhere but cannot find anything only inland rivers and canals ... please let me know. thank you.

@HypergaugeDIY 4 года назад

Thanks for watching my video. Unfortunately I am in the US and I don't have any legal knowledge for boating in UK. Hopefully someone can share some info with you soon. Good luck with your project.

@penawarluka2480 4 года назад

Nice

@HypergaugeDIY 4 года назад

Thanks for watching my video.

@gaatjenietaanprivacy5023 Год назад

All I was missing was actually using the electric engine as well. Other then that, nice video!

@HypergaugeDIY Год назад

Thanks for watching my video! 👍

@allandam9540 4 года назад

Hi Sir. may i know how wide is your inflatable's transom. do you find the launching wheels are too close to the trolling motor and a little difficult to turn the motor's handle left and right ?

@HypergaugeDIY 4 года назад

Thanks for watching my video. The beam of my boat is 60" The wheel does not affect the trolling motor control. My build detail of the launch wheel is posted in another video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-k1NPm-znLVI.html

@allandam9540 4 года назад

@@HypergaugeDIY Thank you for the reply. I have a Seamax with aluminum floor and to put the floor in is so difficult and tiring. so i just left the entire floor in all year. The D ring with rope is good idea. i would like to try it and see if it would help me. Thank again and stay safe.

@ericrichards9471 2 года назад

I have wheels on mine which have bent rods that the wheels attach to. By doing that I’m able to mount a 15hp 2 cylinder motor with just a tiny bit of interference

@vonnnov 3 года назад

Do you think it work be safe enough for the bay/Ocean??

@HypergaugeDIY 3 года назад

Thanks for watching my video. I did use my boat in SF bay a few times before. Of course in a nice and clam days, and it worked great. These types of inflatable boat is often used as runabout for larger boat.

@gs425 Год назад

Oars ...don't forget oars. You always need back up for a motor

@HypergaugeDIY Год назад

👍 Good points. Thanks for watching my video!

@martyjames6204 5 лет назад

great video - thank you. What brand of inflatible is that? Im looking at one on ebay thats similar i think

@HypergaugeDIY 5 лет назад

Thanks for watching my videos. I have posted the information in the details of the video. Here is the link again. amzn.to/2vM2glh

@martyjames6204 5 лет назад

@@HypergaugeDIY thanks!

@af3453 8 месяцев назад

Nice! What model is?

@HypergaugeDIY 8 месяцев назад

The one I have is no longer available. This is the similar boat amzn.to/3j5Is2E Thanks for watching my video! 👍

@tomzhang8675 4 года назад

did u get a hull id when u buy this boat? otherwise, how to get it registered? im in cali too.

@HypergaugeDIY 4 года назад

Thanks for watching my video. My boat has a metal plate mounted with Manufacturer, serial number and other info on it. With the purchase receipt and the info it is enough for the registration.

@shawnwu3170 2 года назад

May I know what battery center do you use?

@HypergaugeDIY 2 года назад

I uses a deep cycle Lead Acid battery to power the trolling motor and the fish finder.

@TheMrRudemeister 4 года назад

Thanks for video!!! Love your set up. I have same boat all I need is fish finder and a 10hp outboard motor and it will be complete. What kid of fish finder do u use?

@HypergaugeDIY 4 года назад

Thanks for watching my video. My fish finder is a very old Garmin Echo 200 gray scale. I do like it, but if I were looking for a new one definitely a color version with GPS and map. If you fish a lot, strongly suggest you get the best you can afford. I didn't know at the time I will use it that much and wish I have a better one. amzn.to/2XEaMB2

@bloodypajamas1944 3 года назад

Just buy the hundred dollar one from Garmin! They are incredible

@madxperiment6366 2 года назад

How can i buy that alluminium hard floor? Thankss

@HypergaugeDIY 2 года назад

Mine came with my boat. However, there are people selling replacement floor online. Just Google replacement floor for inflatable floor will show some results. Maybe you can find one that works for you. Good luck.

@madxperiment6366 2 года назад

@@HypergaugeDIY thanks I’ll try 😀

@janseendiguiseppiThomasMC 5 лет назад

Subbed, cool video!

@HypergaugeDIY 5 лет назад

Thank your for your support! %-)

@nabeeljan7865 4 года назад

@@HypergaugeDIY arbab i work tube reping what your work place space haf

@HypergaugeDIY 4 года назад

@@nabeeljan7865 I do all my work in my garage. Not a lot of space. Please do not post contact info in comments. Best way to contact me is email.

@koalafan1576 Год назад

How long is that boat. I want to get a 10’ SeaEagle.

@HypergaugeDIY Год назад

My boat is 9.8ft long. Have fun! 👍

@haidongxue 4 года назад

My registration stickers come off all the time. How do you let them stay?

@HypergaugeDIY 4 года назад

Thanks for watching my video. I talked about the stickers at the end of this video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HPq_04AOIUo.html So far I have no problem with the way I put it.

@haidongxue 4 года назад

@@HypergaugeDIY I see. It is a good alternative. Thanks!

@hassaenjp116 5 лет назад

How much boat price please I am from Iraq I would like to know

@HypergaugeDIY 5 лет назад

This is the link to Amazon for a similar boat amzn.to/2vM2glh

@justwingit1633 3 года назад

Hey mate what model and brand boat is this

@HypergaugeDIY 3 года назад

This is the similar boat I have amzn.to/3j5Is2E Thanks for watching my video.

@charlstin1979 4 года назад

Hi mate, what’s the length of the boat. Cheer!!

@HypergaugeDIY 4 года назад

Thanks for watching my video. My boat length is 10ft.

@charlstin1979 4 года назад

Lovely thank you and take care during this pandemic

@alantiling4936 5 лет назад

Very nice man I like it from wher I can buy like this in Sydney

@HypergaugeDIY 5 лет назад

Thank you for watching the video.

@jacgur 4 года назад

Where to get the PVC roll bar in the back?

@HypergaugeDIY 4 года назад

Thanks for watching my video. I made that roll bar myself. Not a difficult build. Mainly is 2" PVC as roller and 1 1/2" PCV as the inner tube support. All mount on a "Vertical Convert Horizontal Receiver Trailer Hitch" Vertical Convert Horizontal Receiver Trailer Hitch. Maybe I should post a quick video about it if more people are interested. How about 100 thumbs up for this message.

@RodrinBird 5 лет назад

Helpful video, thanks! What is the name of the air pump? Does it also deflate?

@HypergaugeDIY 5 лет назад

Thank you for watching my videos. The air pump is Kwik Tek AIRHEAD amzn.to/2vTigSr I also have a review on it. Here is the link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QYEk6W9UtMU.html

@baot.5770 3 года назад

What was your boat model?

@HypergaugeDIY 3 года назад

This is the similar boat I have amzn.to/3j5Is2E

@Deltro61 4 года назад

Which pump do you use?

@HypergaugeDIY 4 года назад

Thanks for watching my video. This is the pump I have amzn.to/2vTigSr And this is the video I made when I was testing it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QYEk6W9UtMU.html

@sevdasengezer7768 3 года назад

how many meters this boat

@HypergaugeDIY 3 года назад

Thanks for watching my video. The length of my boat is 3 meters.

@MikeFarowe 4 года назад

Are the wheels so necessary.....

@HypergaugeDIY 4 года назад

Thanks for watching my video. It is necessary for me as I almost always launching the boat by yourself.

@unlimitedj06 Год назад

👍👍👍👏👏👏

@HypergaugeDIY Год назад

Thanks for watching my video! 👍

@robertdean6222 4 года назад

I hope your watch is waterproof???

@HypergaugeDIY 4 года назад

Thanks for watching my video. My watch is a Seiko sport automatic amzn.to/2PZo6LG Perfect watch for my outdoor activities.

@nicolettekay1189 4 года назад

Where do I purchase this fron

@HypergaugeDIY 4 года назад

Thanks for watching my video. Somehow my boat is no longer available. This is the very similar boat amzn.to/2vM2glh

@sekainiheiwa3650 3 года назад

only if I would catch 2 seabass 1 barracuda and tuna for sashimi

@HypergaugeDIY 3 года назад

It would be amazing if you can catch all of them from the local lake near home. Cheers! 😉

@candycuadras4348 4 года назад

30 years ago l had one.l a had a diving tank.and inflated in seconds.

@HypergaugeDIY 4 года назад

Thanks for watching my video.

@richardrevels9340 2 года назад

Im thinking a dolly with wheels like that would get you to and from the water just as easy without attatching stuff to boat or having reach over edge into water not to mention extra weight and ugly wheels sticking up. Just my opinion. If you can debunk my theory I'll retract my statement.

@HypergaugeDIY 2 года назад

Thanks for watching my video. Everyone has their preference and limitations. I am happy to know your choice. Cheers!

@MatthewFordVictoria 3 года назад

Why not simplify the process by adding a permanent horizontal bolt to the posts, then add gate latches to the top and bottom of the transom? That way, when returning to shore, no more pushing the wheels down with one hand, while trying to put the pin in place with the other. Instead, just push the wheel down until it clicks into place! As for Locking it in place... Gate Latches always come with a hole that's intended for a padlock. Just Think... No more having to Line Up FOUR Holes so the pin goes through! My Dad always told me "K.I.S.S." (Keep It Simple Silly!) Try it... and if you Like it, SHOW EVERYBODY!!! You'll get lots of Boaters wondering why They didn't think of that! One more thing... If you're going to leave it at a Dock to go get some Food or Bait, you can put Padlocks on those latches, so you don't return to find your wheels have been "borrowed".

@HypergaugeDIY 3 года назад

Thanks for the suggestions. I totally agree with the idea to keep things simple. This design worked for me and the water and extra little steps does not bother me. There is no doubt many possible ways to improve the design (fancy or not). Feel free to make the best for your purpose. 👍

@ghioceltudor4352 4 года назад

Yes you are right ... well, like me in the country, Romania, there are no policemen who control you on alcohol ... on the water. This does not mean that I abuse alcohol.

@HypergaugeDIY 4 года назад

Drink responsibly is a must. Enjoy with friends and family.

@ghioceltudor4352 4 года назад

if it was winter .... you didn't feel good about putting your hands in the water to lift the wheels

@HypergaugeDIY 4 года назад

Thanks for watching my videos. Oh come on. You are a fisherman. A little bit of your favor drink is going to fix you all up at the end of the day. Cheers.