Transform Your Seahawk 4 with These Boat Mods

Подписаться 31 тыс.

Просмотров 33 тыс.

50% 1

My Intex Seahawk 4 needed some mods to be a cool fishing boat. The Seahawk 4 is an inflatable boat that can easily be modified. Inflatable boats are perfect for diy projects too. In this video I show you my 8 boat mods that I used to trick out my Seahawk 4.
Mod number 1). Carpeted wood boat floor
Mod number 2). Swivel boat seats
Mod number 3). Boat numbers & letters
Mod number 4). Bimini top
Mod number 5). Boat storage box
Mod number 6). Inflatable boat motor mount
Mod number 6 1/2) DIY transom board
Mod number 7). LifeP04 trolling motor battery
Mod number 8). 30 Lb trust Minnkota Trolling Motor
🙂Full disclosure here, I do receive a small commission from traffic that I drive to my affiliate links and As an Amazon Associate I earn from qualifying purchases.
🛒My Amazon Store ⤵️
www.amazon.com...
----------------------------------------
Video Links: Amazon
✅Intex Seahawk 4 Boat amzn.to/3Vq9703
✅ Boat Seats amzn.to/454ZA1y
✅ Boat seat pedestals amzn.to/3x0iGJy
✅ Boat seat swivels amzn.to/3yCCoLO
✅ Bimini top amzn.to/3X4flUk
✅Storage box amzn.to/3V4OYLA
✅ Intex motor mount amzn.to/3KoLfTU
✅ Trolling motor Battery LifeP04 amzn.to/4dYhiYJ
✅ Trolling Battery with LED meter amzn.to/3yGW1mb
✅ Minnkota trolling motor amzn.to/3x1tsiK
✅ LifeP04 battery charger amzn.to/3x1txD4
---------------------------------------
Brunt Boots Link⤵️
🥾 🥾 Want to try Brunt work Boots with me? 🥾 🥾
Go to bruntworkwear.... and enter promo code mrfreds10 at checkout to get $10 off your purchase of $60 or more.
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
-Merch--Merch--Merch--Merch-
Mr Fred’s Merch NOW AVAILABLE⤵️
mrfredsdiy.com
Social Media
Twitter “X” x.com/mrfredsdiy/
🔵 Join the Facebook conversation www.facebook.c...
🟣Follow me on Instagram: / mrfredsdiy
⚫️TikTok www.tiktok.com...
⛺️ Check out our Sister RU-vid Channel ⁠for camping gear reviews & how-to’s⛺️
/ @campingtips-n-tricks EBL Product Links
🔋⚡️EBL Rechargeable AAA Batteries Pack of 8 amzn.to/3oBYx4z
🔋⚡️EBL Rechargeable AA Batteries Pack of 8 amzn.to/3JbSWeZ
🎶Music: www.epidemicso...
🎯 Goal Zero Products
www.pjtra.com/...
🏆Made in USA🇺🇸
Leatherman “Rev” Multitool (around $50)amzn.to/3wbO0St
Leatherrman
www.pntrac.com...
For Businesses Inquiries please Email:
mrfredsdiy@yahoo.com
Mr Fred
505 E Windmill Lane
STE 1C -217
Las Vegas NV
89123
#mrfredsdiy

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@MrFredsDIY 4 месяца назад

Do you have a question about any of my boat mods? Leave a comment and tell me what you think or ask me a question and I will do my best to answer!

@TrueHelpTV Месяц назад

theres this guy who makes funny fireman/ems videos and yall might be lost brothers

@ToniHomedesiSaun 3 месяца назад

Suggestion: Mount a mid-sized solar panel over the bimini and you'll have energy forever. Don't worry anymore about the battery.

@gutshotaz2805 Месяц назад

Need about 3 size the boat surface area.

@rogerhamm6921 3 месяца назад

Wow, what a great idea for those on a budget or with limited space. Well done Fred.

@nava8529 4 месяца назад

Love your videos about this inspired me to make my own last year … thank you ☺️

@MrFredsDIY 4 месяца назад

These little boats are pretty cool!

@24hrMusic 4 месяца назад

Hey Fred.. If you still want to use the outboard, you can set up a brace from the transom to the floor boards. That way the rear board becomes the hull and the tubes are just flotation. Always love your videos!

@MrFredsDIY 4 месяца назад

Thanks for commenting and thank you for watching. We need to get this boat back out on the water next month and mess around with it again. I have a few ideas along the lines of what you were talking about, but I also want to put more air in the boat. This is actually my second Seahawk 4. The first Seahawk had a one piece floor and we used to use the gas motor all of the time with the exact same set up. Roger and Jeff reminded me that we would often use the hand pump to top off the boat after launching it into the cold water. I believe that the air in the boat had condensed quite a bit after being on the lake all day. Maybe we should’ve tested the gas motor first lol.

@24hrMusic 4 месяца назад

@@MrFredsDIY One other thought is to try out an Intex Mariner 4, which is a bit tougher and holds much higher pressure in the tubes. It's even compatible with your existing motor mount. I occasionally see them "on sale" for around $200 if you keep your eyes peeled... Best of luck in whatever you do. I will keep watching :)

@David-er3di 2 месяца назад

Thank you! I have an excursion 4 and am going to be doing this exact job for it thank you for giving my ideas a realistic direction!

@cassandralesh8536 17 дней назад

For the gas motor build a transom that attaches to the floor. Or use a 24 volt trolling motor.

@InflatableBoatsOutDoors 21 день назад

Very nice..good ideas for budgets!

@zonaboy24moore51 Месяц назад

Can buy one of those custome floors from you have the same boat

@79robeer Месяц назад

My personal tip: Osb plate is heavy, polycarbonate plate is much ligter.

@coleross9295 3 месяца назад

Good video right to the point. Great ideas.

@MrFredsDIY 3 месяца назад

Thanks for commenting. This little boat has been a great project.

@stitch-xx2oo 2 месяца назад

How do you put the battery in the boat without tipping the weight? Great presentation.

@unregistered7777 21 день назад

I went to home depot to buy OSB and they only had 4x8 pieces! My Intex Excursion 5 is 12x5! Any tips on how to get our hands on bigger pieces of OSB? I would much rather have a two piece floor than a three piece floor!

@nickmarangos2475 3 месяца назад

If you do the flooring structure correctly you can mount a gas motor to it I have done it

@mlvncgndhn9583 3 месяца назад

i like the boat as much as i like the xterra!!!!

@bingusmcdingus6326 Месяц назад

Would you mind telling me the dimensions for the floor boards? Thanks

@MrFredsDIY Месяц назад

The answer is not so straightforward. It is custom scribed. If you watch this next video, I answer that question in the first three minutes.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hygCX8Nl9Yk.htmlsi=2_GEYHJFfTQQN7pI

@LiviuXSA 2 месяца назад

could i row this upstream on a river for 1 kilometer with 300lbs worth of load ? (2 people and camping gear) or will the current prevent me from advancing

@badgorilla 4 месяца назад

Nice fish! lol

@fififornow8031 2 месяца назад

Badass!

@chris-c2c4k Месяц назад

So I have a 2 stroke motor on my one but what I'm finding it starts to go under very easily as soon as you do some throttle Any ways to help prevent it been tucked underneath as much?

@MrFredsDIY Месяц назад

I think your problem is torque. Two stroke engines have so much torque. I’ve seen videos where guys attach supports to the floor. That’s a possible solution.

@CurlyyCS 2 месяца назад

Hey! How did you go about getting your boat Emission Certified? Did you have to do that in NV? I cant register in CA until I have a completed CA Emissions Certification. Intex said they just do certificate of Origin, which I already had gotten from them.

@MrFredsDIY 2 месяца назад

Thanks for checking out my video! We do not have that here in Nevada. It sounds very complicated though.