Toasterdynamics Episode 12: Vortex Generators and the Colt - the Final Chapter

Подписаться 869

Просмотров 2,3 тыс.

50% 1

Investigation of the aerodynamics of the toaster-shaped Mitsubishi Colt Ralliart Z27AG using basic wool tuft analysis and other techniques.
This episode: I revisit Sandown Raceway after 5 years better prepared to try and determine if vortex generators are really worth it (or not) on the Colt as a drag reduction device.
References / Links:
- roads-waterways.transport.nsw...
- scholars.csus.edu/esploro/out...
- Toasterdynamics Episode 8: Vortex Generators and the Rear Diffuser on the Colt Ralliart
• Toasterdynamics Episod...
- Toasterdynamics Episode 5: Airtab Vortex Generators to Reduce Drag on the Colt Ralliart
• Toasterdynamics Episod...
Music: "Flying" - Snowplow, "Cambodian Odyssey" - Kevin Macleod, "Thunder" - Eveningland (Royalty-free)
rcoltlyf is not a trained aerodynamicist, mechanic or indeed anything to do with cars. He is a scientist though, likes understanding how things work, and really likes his Colt.
コルトラリーアート! :)
00:00 The low budget but ever-changing intro
00:14 Introduction: How testing was done
01:32 Problems from 2018 how they were changed in 2023
03:31 Testing in 2023
04:11 2023 Test results
05:10 Conclusions
05:45 Credits

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@abomala1607 4 месяца назад

I put on cheap small vortex generator shape of water drop on a Suzuki Lapin (a car that make the colt look like a jet fighter in comparaison). Give me great strait line stability and less prone to car movement due to wind and truck passing by. So just to say even small crap from chinese chop 5 mm tall can do a great job compare to nothing. Of course cheat box shape are more wellcoming those. Not also i put in front of the A pillar and effect is good also. A pillar are zone of great turbulence so vortex can help if placed well

@brightmodern 6 месяцев назад

VGs can be used on the roof just before the rear window on the bmw e36 body shape to promote attached airflow over the rear window and down on to boot where you can fit a small bootlip spoiler. This makes a noticeable difference in higher speed stability by reducing lift at least, if not generating overall downforce. This also reduces the drag over the rear window and a well designed spoiler can give cleaner air seperation at the back to reduce drag in the base area. Some body shapes will benefit more from vg's than others, and they can be used as part of a wider strategy to achieve particular airflow characteristics

@rcoltlyf 6 месяцев назад

Agree it is very body shape dependent.

@brightmodern 6 месяцев назад

@@rcoltlyf i do like how you tested, measured and quantified their effects on your car though, then arrived at your conclusion based on the data. Too many people slap stuff on without any thought. Really enjoyed the vid mate 👍

@rcoltlyf 6 месяцев назад

@brightmodern Cheers

@twiliteblue6053 5 месяцев назад

Excellent video. Thank you for your dedication and scientific data. Perhaps those VGs were too "tall". Tiny ones under 1cm (inspired by shark scale) near the point of detachment might give the most improvement. The idea is to leave laminar flow untouched, only use VGs where the hi-low pressure gradient is greatest (as seen on wings and propellers).

@rcoltlyf 4 месяца назад

Smaller ones should have less drag and these were max 2.5cm tall (1 in.) so maybe.

@edsgarage001 3 месяца назад

I got a similar result in my testing

@rcoltlyf 3 месяца назад

Cool

@Fjordstar 7 месяцев назад

Nice Videos, just in case you want to try a new bionic kind of Vortex generators, let me know in your reply, Keep up your racing.

@rcoltlyf 7 месяцев назад

Happy to have a look for sure. Would need to have at least some evidence for possible benefit to take half a day off to coast around the local racetrack!

@Fjordstar 6 месяцев назад

There is scientific proof by a university, one VG contributes 0,4% on drag reduction for a Semi Truck class 8, for your car I would use the smallest design which is around 10cm long the one you used in the video are Airtabs they advertise it with 2%-6% improved milage @@rcoltlyf

@rcoltlyf 6 месяцев назад

Don't suppose you have an actual reference on that so I can look at the design?

@camposvazquez 4 месяца назад

I will buy them....i am in los Angeles

@rcoltlyf 3 месяца назад

Unfortunately I gave them to a mate to put on his box trailer. Will let you know if they come back again.

@camposvazquez 3 месяца назад

@@rcoltlyf thank you....

@Deshereda2 11 месяцев назад

Those yellow stickers are the issue 😂 Try again

@rcoltlyf 11 месяцев назад

Will use green next time. Will totally change the results for sure.

@TwoThreeFour 10 месяцев назад

@@rcoltlyf I reckon blue will give you the best result 😆

@Eduardo_Espinoza 4 месяца назад

green = eco 😊 ☢️🛢️

@Eduardo_Espinoza 4 месяца назад

I wud buy the new Mitsubishi Mirage it has a true kammback, etc. thus, really good mpg/liters per km. or just copy paste those paid qualified engineers' work & stick your name on it, toaster dynamics :)