No video :(

Toggle clamp and T-Track clamp upgrade for MFT style workbench. Cheap clamping solution for MFT top.

Подписаться 63 тыс.

Просмотров 103 тыс.

50% 1

Toggle clamp and T-Track clamp upgrade for MFT style workbench. Cheap clamping solution for MFT top.
In this video I will be upgrading my cheap toggle clamps and my T-Track clamps so I will be able to use them on my MFT style workbench. I have recently upgraded my workbench with some dog holes and now it's time to find some cheap clamping solutions.
If you enjoyed my video please consider Subscribing to my channel, it really helps me a lot! Thanks!
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more.
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #workbench

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@CasualDIY 4 года назад

Check out my video on how to easily upgrade your Toggle Clamps - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uWW5YKu0Iw8.html

@marcusplatt2007 4 года назад

I like your attitude to solving problems and working to a budget which as an hobbyist and not trying to earning a living from making stuff but just for the enjoyment of being creative. Your videos are on the money from my point of view. So excellent work sir 👍👍👍

@CasualDIY 4 года назад

Thank you for your kind words it means a lot mate thank you👍

3 года назад

Hello my friend, I bought 5 compression clamps. I found you when I researched ideas for using these on the workbench. Most opinions and videos about it are on your channel. I followed other toggle clamp ideas as well. Thank you for sharing these beautiful ideas. I will try what suits me. I'll be on your channel now. Because we do similar jobs. I also do woodwork as a hobby. Thank you for sharing. See you all the time. Big greetings. Stay healthy and happy.

@CasualDIY 3 года назад

Welcome aboard 👍😁 thank you for watching 👍

@gregghernandez2714 4 года назад

I eventually will make one of these tables once I get my garage all sorted out. I think the inexpensive toggle clamps is an ingenious idea. Once you have the aluminum tubing, pieces of wood, some screws and the clamps, you can probably make any number of these at about a tenth of the more expensive clamps made by some of the well known companies. Thank you so much!

@CasualDIY 4 года назад

That's true, I got way too many now, oh wait it's never too many just need to find space to put them somewhere 😂👍

@Tensquaremetreworkshop 4 года назад

Just made a couple of the T bar clamps. A suggestion- if you have (or buy) a 6 mm die, you can use 6 mm rod (instead of threaded rod) and thread the top 50 mm. This is not only stronger, it means the smooth surface will not mar the table. I added a sleeve of heatshrink, for an even smoother/softer surface. I made the bars and handles (with a 6mm insert) out of thick ply. Many thanks for the idea!

@CasualDIY 4 года назад

That's great improvement idea thanks. We both benefited from out now 😁

@asd67lkj 2 года назад

Thanks you. I have found a better use for the spare toggle clamps I have lying around.....

@tomprovan50 26 дней назад

great idea I think I will just get a flat bar like an l bracket material put a bend in get a 1/4 inch ready rod cut and bend and buy some handles from amazon or try a wing nut first thanks

@CasualDIY 26 дней назад

Good idea, could be a solid improvement

@das250250 2 года назад

If you build that wood base 96mm long and place dog at one end and toggle at other you can then set your work piece at Any distance from holes which allows for cutting any size

@jamestaylor8217 4 года назад

I like it. Practical for both woodworking and metalworking/welding fixture tables. I'll build some. Thank you.

@CasualDIY 4 года назад

Thanks, glad you liked it. Got two more videos with some ideas coming out in the next two weeks👉

@geoffreymaddison6434 3 года назад

One more thing to modify the Ttrack clamps would be to elongate the hole in to a slot. I think this will make them more useable. Regards Geoff Maddison

@hwood9783 2 года назад

Agreed. I just added some slots around my work top and did not need holes. Just make sure the individual slots are not too long to weaken the work top.

@drflfonseca 2 года назад

Thanks my friend. I loved your job.

@CasualDIY 2 года назад

Thank you kindly

@anip137 3 года назад

Thanks for this idea.. I prefer the toggle clamp with few diy adjustment.. Easy to attach on workbench..

@CasualDIY 3 года назад

Thank you for watching

@anip137 3 года назад

@@CasualDIY ur welcome...

@christofix 4 года назад

Great ideas! I need to do more with the dogholes in my workbench. Thanks for the inspiration. When I make a simular video I will definitely recommend your video in it. Greetings

@CasualDIY 4 года назад

Thanks mate, glad you liked it. I got few more videos on this so there will be plenty of inspiration 😁

@briansworkshop01 4 года назад

As always fantastic ideas good clean video just love it thanks for sharing 🍺🍺👍👍👍👍👍

@CasualDIY 4 года назад

Thank you mate, glad you liked it 👍

@BDL090754 2 года назад

Great clamp stuff on your site sir, Thank you very much

@CasualDIY 2 года назад

Thanks for watching 👍

@jasonlaverty76 4 года назад

Nice and simple, but I never thought of it, so really impressed with your ingenuity. Off to BG to order some clamps!

@CasualDIY 4 года назад

Hehe thank you, got 3 more videos on this topic coming out over the next three weeks👍 hopefully it will give bit more inspiration 😁

@danutafranczyk4594 4 года назад

So clever! Great idea!

@CasualDIY 4 года назад

Thank you

@TheGrantAlexander 4 года назад

Very nice ways to use those cheap clamps 👍

@CasualDIY 4 года назад

Thank you, always work to a budget so I try to use what I got 👍

@davidclayton6521 Год назад

Aluminum rod for the toggle clamps can / could you go any more expensive yep I am sure you could LOL yeah then drill it out the entire lenth for a bolt in the center

@CasualDIY Год назад

When I actually made this the aluminium rod was quite cheap actually

@RADCOMJ1 4 года назад

impressive Tomas well done bruv

@CasualDIY 4 года назад

Thanks mate😁👍

@ladykenja2700 3 года назад

- Ingenious ! ! ! Thanx 4 sharing.

@CasualDIY 3 года назад

Thanks for watching 👍

@glenschumannGlensWorkshop 3 года назад

Thanks for the ideas.

@CasualDIY 3 года назад

Thank you for watching

@abp2861 2 года назад

Great video mate. Keep them coming 👍🏻🇦🇺

@CasualDIY 2 года назад

Thanks, will do!

@drodver 3 года назад

Instead of aluminum glue a wood dowel piece into the plywood base. Even easier & cheaper.

@harindergill7221 3 года назад

good idea. Thanks

@CasualDIY 3 года назад

Thanks for watching👍

@garybuelow5362 4 года назад

Great video! Thanks for the info, like you shop ideas, now a new subscriber.

@CasualDIY 4 года назад

Thank you and welcome to my channel 👍

@johnhusband924 Год назад

Hi Thomas really enjoyed the video and very well delivered. Could you tell me the thickest timber you can clamp using the toggle clamp.

@CasualDIY Год назад

Difficult to give a definite answer. It depends which toggle clamp you will get (what size) Then you can upgrade the rod with a foot that will have an impact plus as in my case I have added a piece of plywood as a base and again depending on how thick that is you will be able to clamp different sized material. Have you got any particular size in mind?

@JohnClothier 4 года назад

They are really cool! Nice one

@CasualDIY 4 года назад

Thank you kindly, few more cool ideas in the pipeline 👍

@Tensquaremetreworkshop 4 года назад

Great ideas! But, as you have a tap, why not tap the ali bar? neater and uses less threaded rod.

@CasualDIY 4 года назад

Yes mate, that's a good idea!

@robertomedina1760 3 года назад

Great idea thanks for the video

@CasualDIY 3 года назад

Thank you for watching 👍

@kennyatkins6448 4 года назад

Very clever well done. 👍🥃🏴󠁧󠁢󠁳󠁣󠁴󠁿

@CasualDIY 4 года назад

Thanks mate, there more to come👍

@raulgomez3588 4 года назад

It's very good idea, thanks

@CasualDIY 4 года назад

Thanks, glad you liked it 👍

@alfrose9831 4 года назад

Another great video mate! Keep 'em coming!!

@CasualDIY 4 года назад

Thanks mate, plenty still to come👍

@rickandrews8816 4 года назад

Hello Thomas. I have made dogs w 7/8” dowel and a base to hold a toggle clamp (similar to yours I think). The hole and dowel are both 7/8” but the dogs slip up a bit and cause loose clamping. Any easy solutions to keep the dogs snug so clamping is tight?

@walshesworkshop 4 года назад

I like the first modified clamp. Would a starlock washer help keep the 90* side more secure to the clamp? Just a thought

@CasualDIY 4 года назад

Could do 🤔

@griseldarodriguez6052 Год назад

I like the sander at 2:38 could you please tell me how to get it? (brand, name, etc) thank you 😊

@CasualDIY Год назад

Sure here you go - amzn.to/3KT82ak

@griseldarodriguez6052 Год назад

@@CasualDIY thank you very much ❤️

@garethsharp4039 4 года назад

Great ideas mate. 👍

@CasualDIY 4 года назад

Thank you, few more in the coming weeks mate👍

@PenguinDad0007 3 года назад

Was hoping you would give us a link to the place where you bought the clamps.

@CasualDIY 3 года назад

I got them off Banggood, they come and go so the links don't last very long unfortunately

@kdfz1 3 года назад

Good stuff

@CasualDIY 3 года назад

Thanks 👍

@lianium Год назад

Toggle clamps should be screwed to the table beside the object. I made a Long Bar Double Clamp .This all-in-one clamp covers the entire table. Here is the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sMxZPmWKsro.html

@gustanto1981 4 года назад

Great idea! So, your aluminum shaft is to make a grip and friction to the table hole right?

@CasualDIY 4 года назад

Thanks, that's correct😁👍

@gustanto1981 4 года назад

Thanks Thomas!

@robertwilson773 4 года назад

Very nice!

@CasualDIY 4 года назад

Thanks 👍😁

@Yahatacooky 4 года назад

Hi Geeeeezer, Did you use a tap to drill the rod?

@CasualDIY 4 года назад

I initially drilled it with a bit that supposed to make thread inside of the rod but that didn't work so after that I just used a normal drill bit for metal👍

@JohnMadeit 4 года назад

Good stuff 👍

@CasualDIY 4 года назад

Thank you mate, more to come in the next few weeks 👍

@stevewalker7822 4 года назад

Neat idea

@CasualDIY 4 года назад

Thanks, got few more coming in the next couple of weeks👍

@010Larry010 3 года назад

Hi, why use so much aluminium rod for the toggle dogs? Surely only the thickness of the mft top is in contact with it.

@CasualDIY 3 года назад

That's true, I have overdone it a bit. But for security I would go bit more that just the tabletop thickness.

@Heseblesens 4 года назад

Good use of the clamps. Someone ate their brainfood growing up 🤗.

@CasualDIY 4 года назад

Hehe thanks 👍😁

@jonreeves3993 3 года назад

I’ll do this but with a wooden dowel instead

@CasualDIY 3 года назад

May come with some issues during different seasons as the wood expands and contracts. Thats why I went with aluminium.

@GabiFodorrasRO 4 года назад

Super...big like !!!

@richardclarke9966 4 года назад

Hi Tomasz, how are you finding having dog holes all over your bench? I'm toying with different patterns to save drilling them all out - two runs at the top, two at the bottom, a few perpendicular, etc. Would you drill all out if you did it again? Cheers!

@CasualDIY 4 года назад

Hi, that was my initial thought to have them in certain places but I just went with the whole bench. Now I think it was a good idea I tend to use the whole bench and it's so easy to clamp everything. One downside is that if you are working with small things like screws, bolts or something that can tell through the holes then it becomes annoying. Fortunately I got two carts on both sides and now I put/work with those small things on them 👍 hope this helps😁

@richardclarke9966 4 года назад

@@CasualDIY Yeah, that was my thinking. I might go with a tray 10cm underneath to catch small items and store the dogs, etc. Cheers

@CasualDIY 4 года назад

@@richardclarke9966 no problem mate 👍

@barryroberts6470 4 года назад

Great ideas and video Tomasz, do you have the link to that bar you used. Barry (Wirral, ENG)

@CasualDIY 4 года назад

Thanks mate, try this one rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F293163136858 The seller I bought it from seems to be out of stock :/

@pdah831 4 года назад

can toggle clamp function with thick material?

@CasualDIY 4 года назад

All depends how you set them up

@raysmith1992 4 года назад

Nice solutions all I need is an MFT table, like how your mitre saw appears out of nowhere, have you got a video on your MFT table

@CasualDIY 4 года назад

Hi and thank you. Yes got videos on building my whole workbench just check out my Workshop upgrade playlist and they are all in there 👍

@raysmith1992 4 года назад

Casual DIY thanks for the quick reply, I will have a look as your solution maybe exactly what I need, I use mainly hand tools, but use a mitre saw, track saw and a planer thicknesser and my table saw will be going as I hardly use it as I can rip cut quicker than setting up my cheap Lidl table saw to get each cut parallel to the fence.

@das250250 2 года назад

I don't like this one , threads will damage dog holes too much ..maybe place some plastic tube over thread

@CasualDIY 2 года назад

Not had major issues with that but ye adding some plastic tube would improve it for sure