Tool Changer Recovery; Haas Side Mount Tool Changer (SMTC) - Haas Automation Service Video

Подписаться 300 тыс.

Просмотров 112 тыс.

50% 1

Do you need to recover your Side Mount Tool Changer (SMTC) on your Haas mill? Andrew (engineer) walks you through the process step-by-step so you can have your machine back up and running quickly.
Andrew also gives you some tips for maintaining your tool changer and tools to keep it running trouble free.
If you are not comfortable with any of the procedures outlined in this video, please contact your local HFO: www.haascnc.com....
If you found this video helpful please hit the like button and share it with a friend who might find it helpful too . . . and thanks!
Follow Haas,
Facebook - / haasautomati. .
Instagram - / haas_automa. .
Twitter - / haas_automation
Category
Science & Technology
License
Standard RU-vid License

Наука

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@JD97711 7 лет назад

Thank You HAAS ! I Ran into this conundrum last night about 30-minutes before end of shift so I had to pass it off. Texted my dayman this video.

@richhuntsd12 2 года назад

Thank You Andrew. That was really well done and extremely informative

@matthewmagnaghi154 6 лет назад

very helpful. tks. day 2 on a vf2ssyt, and I got the 2066 alarm. within 5 minutes I was able to start running again.

@nf794 5 лет назад

We got a spinner 1530 and you'd have to restart the Machine like 5 times and then manually turn a screw to retract the gears....remind you its a Machine from 2016...so this is awesome to see !

@harrisonli3031 3 месяца назад

Great!

@nileshdhumal6549 2 года назад

Thanks for the information

@celeperez1969 4 года назад

MUCHAS GRACIAS POR EL VIDEO ME SACO DE APUROS

@ericking3516 4 года назад

wheres mark?

@auttapoltrekem1504 2 года назад

Big thankyou

@energiasolaroff-grid3544 2 года назад

Olá o magazine travou com 2 ferramentas grande parou fora de posição posso executar esse procedimento para colocar o magazine na posição inicial.

@JustinKeller5719 Год назад

does anyone have any info if the tool is still in the spindle and the arm hasnt gone down yet as you cant move the arm down only up

@Shortsfilm1123 5 лет назад

Very useful tips! Thanks you sir.

@zahaadrian1061 Год назад

hello, I have a vf 11 from 2008 and the cambox is broken. Can you tell me how to make it so that I can make a manual change in the program without leaving the program in MDI

@Depth_of_Cut 10 месяцев назад

Next time let's see a cat 50 machine with a 4"dia by 8" long face mill on 1 side and a 2 " carbide ball endmill in the other. let's see ya one arm them out! 😎

@bradleeshea5482 2 года назад

ok I have 2 of these mills where I work and 1 has the double arm spin counter clockwise which makes sense to me because the force of spinning would push the tool into the arm but the other has a problem dropping tools and the arm spins clockwise. is there any way I could change the direction it spins?

@Eggsr2bcrushed 6 лет назад

This is a total pain on OKK machines with Mitsubishi controllers. You have to run a dozen different m codes in mdi to return the arm and pockets.

@joecity1879 5 лет назад

Yo you a life saver bc i didnt want to bug kno one on my shift to assist me with my oopsy lol self relient kinda

@christiancatamin2351 5 лет назад

nice tutorial

@saqlainshaikh8932 6 лет назад

Thank you haas

@MiTaDiLi 6 лет назад

That's great for user . !

@creativetechnologies5394 5 лет назад

I HAVE VF2 I MACHINE ATC PERFORMANCE VERY POOR...! I WANT SPEED UP ATC WILL YOU PLEASE UPDATE THE NEW VIDEO FOE THAT BEST SOLUTION.

@vishwanathsh7385 5 лет назад

Thank you sir

@synocate5602 3 года назад

My machine is stuck with a 941 error after. After resetting the pocket list with the origin button. ‘03 vf2b

@roblooney3728 Год назад

How do you get to manual Recovery mode?

@bobjimenez4464 6 лет назад

Our VF3 mill with a 40 taper has this frequent tool changer error: tool changer has timed out. what is the recovery procedure?

@rileygriffin1187 5 лет назад

Ever figure out a solution? We are currently getting this error in my shop and the automatic recover is not fixing it. Thank you in advance for any advice.

@narcisosantanabautista620 3 года назад

thank!!!!

@dek16balin47 4 года назад

Grease should not be used, because grease is tough, will cause dirt or iron powder to adhere and damage the pull ball stud set. Using oil and air to blow dry enough to be better

@throwaway8962 5 лет назад

What if it alarms when there are 2 tools in the arm? It stopped and alarmed mid tool change. The arm didn't drop down far enough to push the pin and release the tool for manual removal. Both tools are in the arm, but one is still in the spindle and the other is in the pocket. It's a 2008 VF4, and it just makes me nervous to continue with the recovery instructions, because none of them mention the situation the arm and tools are in

@haasautomation 5 лет назад

Throw Away - It's hard to be 100% sure without inspecting the machine and checking diagnostics, but the way you've described it the control would recognize that a tool change was started but the TRP (tool release piston) switch was never reached. So recovery step one should be to slowly lower the double arm until the that switch is reached, meaning you should be able to remove the tools at that point. I know you posted your comment yesterday so you've probably tried something by now, but if you haven't hopefully this helps. Haas Automation

@throwaway8962 5 лет назад

@@haasautomation Thank you for your reply! I ended up choking the rapid to 5% and tried pressing the ATC REV button (with my fingers crossed) to get the arm out of the way. I had to press it about 10-15 times until the arm rotated back to its origin, removed the tool from the spindle, and finished the recovery. The pocket went back up, and everything worked as normal. Hasn't done it since.

@willkitchen8566 5 месяцев назад

Same problem - tool was inserted incorrectly and both are stuck. Automatic recovery fails, and does NOT give an option for manual recovery. Tool release won't work since the tool is still in the arm. Releasing the arm lock manually while pressing tool release doesn't achieve anything either. Can't put pocket up as other tool is in that one too. Ugh@@throwaway8962

@valvoline8591 4 года назад

I cant recover the tool How can i jog z axis up?

@surajjadhav2829 6 лет назад

Thank u. Which was the lubricant you applied on tool holder?

@haasautomation 6 лет назад

Hello suraj, The grease we're using here to lubricate the various parts of the SMTC and the tool holder is Red-i extreme pressure grease. But most high quality high pressure industrial/automotive greases will work fine as well. The important thing is to apply the lubricant regularly so these surfaces are not making contact in a "dry" state. Thanks for the question.