Thanks Ron great video! Actually this is coming in handy, a friend of mine has a box that is completely over loaded and runs very slow, so thanks again!!!
Hi i realize this is an old video but i have a T95Z plus and when i push down and put the cord in the box doesnt even light up. When i take the toothpick out and "unclick" and plug the power cord in it lights up but only saya boot
@dannye2223 @jerrano301 I can restore my T95Z, this method of video is for old devices, new devices with H618 CPU need a Flash Firmware from MicroSD Card Image.
Thanks My t95z plus is only 2.5 months old and this BOOT problem is happening and I attempted the toothpick/thin screwdriver and not happening for me. Should I waste my money buying a new power cord Look forward to your reply
Can try. Should feel a click in the a/v port if it's possible. If not, a factory reset in the settings is the same. I only recommend toothpick method if box isn't even booting, and may have to go into USB burning method, but if you can reset through the settings, that is a lot safer.
Thanks. Great video. How on earth your box's memory usage is so low? For mine it's always as good as 40% if I don't open any APK and if I open KDPlayer or other APK it goes up to 60% quickly. Given that I've installed only a few APKs, it's strange to have such a high memory usage. How can you keep it so low?
I have the T95Z Plus Android 12.0 TV Box. Was booting to Home Screen like it should. Now boots to KODI. Do I attempted the reset as done here. My Android box will not power on while holding the reset button and power at the same time. My version does not have a power button so I use the remote controls on/off button.
Hi mate, can I get your help, when I turn on my t95z , (on the stand by screen where it says kodi apps browser etc,) I cant get my cursor to move to any section can’t get to settings apps etc, tried new remote replaced batteries you name it I done it, i even do complete factory reset with holding a pin in , but this is the strange part my remote works in there to select the options like factory reset reboot restart etc, so I went ahead done re-boot everthing restarted as normal but on the main screen again remote won’t move to select kodi apps setting etc , any help please
hi if I plug in the power cable on my box T95Z plus while holding the reset button, the box stays off! What do I have to do differently in this case? mfg please help me! Thanks 🙏🏼
just curious, I bought this box and it started up fine but when I tried to set up the Ethernet it just stayed greyed out wasn't able to click that (tried different cables with the same result) any ideas what might be wrong brand new box
I have 2 problems with android tv box sw95 First: problem of screen color change all the time.i cant watch well 2.i have momery card but i cant send appk to sd .can you pls help.thanks
bill lowry I'm not too sure, but should be able to hear n feel the button in the a/v hole, unless they put it somewhere else. But just hold down on it while you plug it into power, just as my video shows n keep holding it until the android screen comes on. Sometimes it takes a few tries, but just make sure you hear n feel that button, maybe that device it has a reset button somewhere else!?!
Sometimes it takes a few tries, just try again, but should boot up, so maybe hdmi isn't plugged all the way? I would recheck hdmi n make sure the button is pressed and held while you plug in power cable, sometimes it's easier with 2 people.
Hi, im having problems with my box, im getting a green screen and nothing happends, i have disconnected the router and the power of the box and it still happens. Any help u can give me.
Does your display light up? T95z is known for faulty power supply, u would try a different HDMI and port, and then try a different power supply, just make sure to get one with same specs, they have a universal one for cheap on Amazon that comes with lots of different size connections.
@@k1a9o73s the box turns on but nothing else just says boot and a green screen on the tv. U saying to put another hdmi and a new power cable, i will chk and let u know. Thanks for the advice
My box just went dead tried this reset all it does know us boot up and nothing just the box stays green no flashing blue like before ,I think it's fried
Really not sure, i have never had that issue, and now i gave it to my brother who runs it on wifi with no issues either. If it has "ipv6" enabled, maybe try disabling that and give it a restart?
@@k1a9o73s thanks for replying, I'm trying to do the factory reset right now but the problem is I can only wipe data, it won't actually do the reset and when I reboot system it just stucks at logo screen again..
Ya, sometimes it takes a couple tries. Just try the other options, or do exactly like i do on video. It may take a bit to boot, but it should come on. If not, just try again with a different option from the android recovery screen.
@@k1a9o73s it worked, I just had to wait for a couple of minutes.. Sorry for bothering you but i also have one more question about screen cast, I find it in options I connect to my phone for example and it just disconnects right after it connects
Awesome it worked...i have never casted to this device, but on other devices i just cast from the app like youtube or facebook or movie apks, but only on rare occasion. Maybe this reset will help, since your wifi is always disconnecting, maybe thats why casting kicks you out? Really no idea on casting though?
Rod Emm not sure about 6.0, but there is a "powerkey function" setting on my 7.1.1, but I never mess with it, so maybe your powerkey function is set to power of instead of default sleep mode?
If I just tap my red power button it puts it in sleep mode. If I long press power button, it gives me option to power of or restart, but in settings, there is a powerkey function setting that you can change to whatever you want powerkey to do. Or at least on 7.1os
Rod Emm but yes, "factory reset", then click reset media box, then click erase everything. I believe thats how ya do. But watch the other video that is titled "factory reset through settings"
Sometimes it takes a few tries. I only recommend toothpick reset if your box isn't booting up. If your device boots, then just use the factory reset through the settings.
@@k1a9o73s I need firmware t95z plus with chip wifi AP6255 and 2gb ram and 16gb rom. For use USB_Burning_Tool. Inside say S912_2G + 16G_v1021 Not is Sunvell, i thing is not genuine. Is generic.
Oh...I have never messed with firmware, man. Not on the t95z. I have updated the firmware on my h96 max hexacore rk3399, and I found the firmware and driver's n tools at freaktab.com forums, just search for whatever you're looking for, but also, make sure you know the process before attempting it, or you could mess up your device.