Top 10 WLTOYS 124019 Essential Upgrades

Подписаться 58 тыс.

Просмотров 36 тыс.

50% 1

Get Your Very Own WLTOYS124019 Right here - www.banggood.com/custlink/KGG... Buy The Best ESC & Motor Extension Leads Right here - www.ebay.com/itm/153961222007
Like It? SHARE, SUBSCRIBE & HIT THE BELL - ru-vid.com...
RC Car Products We Use:
PowerHobby RC Car Speed Meter (Worlds Best!) - tinyurl.com/RCarGPS
Powerhobby Batteries - tinyurl.com/PowerHobbyBatteries
Gensace Batteries - genstattu.ositracker.com/1931...
Batteries For Bashing - www.banggood.com/custlink/m3D...
25KG Servo - www.banggood.com/custlink/vGv...
1/5 Scale Servo - www.banggood.com/custlink/m3D...
Cheap RC Radio We Use The Most - www.banggood.com/custlink/mD3...
Best RC cars Under $100
1. WLToys 144001 (40mph!) - www.banggood.com/custlink/vmm...
2. WLToys 124019 (43mph+) - www.banggood.com/custlink/KGG...
3. Q902 - www.banggood.com/custlink/Dvv...
4. SG1603 - bit.ly/3qlZpc3
5. HobbyPlus CR24 G-Armor - bit.ly/3rws4Nt
Best RC Crawlers Under $200: -
1.) RGT136161 - www.banggood.com/custlink/3KD...
2.) Redcat Everest 10 - bit.ly/36ng2xr
Want to send something to Driftomaniacs to review and see it on the channel? Contact us via the link on the 'about us' page
Music: www.bensound.com
#RCCARS #WLTOYS
• Top 10 WLTOYS 124019 E...

Опубликовано:

8 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 147

@baffledsquirrel2122 3 года назад

I greased my diffs on the 124019 it’s my first RC car and I heard it was good to do so I did and it was honestly fun taking it apart working on it and putting it back together. Definitely think I’m getting hooked on RC

@pacopakito4576 Год назад

I'm 89 years old and I'm getting hooked with rc wltoys

@rickiemoore2858 3 года назад

Do you have parts list for all of these mods and maybe links?

@tugrasarchive 3 года назад

I need more videos of the 124019! They are so good!

@philiplibby7536 3 года назад

I agree 💯

@tugrasarchive 3 года назад

@Gerald Kendall ok thank you :)

@joski9030 2 года назад

Got mine a couple of days ago not even took it out yet. Looks nice in the flesh.

@Made2FartTurds 3 года назад

What kind of foam tires are you using and where did you get them??? Great video BTW!!

@charlesedinger3063 3 года назад

I'm pumped I ordered 1 a week or 2 ago for my daughter it'll be her first rc that's all hers she's always afraid to drive mine even though I always tell her I don't care if they get banged up because fixing them is half the fun but I'm excited for her to get it next week and to start upgrading it with her little by little and not being afraid to drive it and not worry about tearing it up

@SouthersMedia 3 года назад

Great video. Do you have a link for the foam tires and wheels?

@the1detail71 3 года назад

Go for it. Its all about pushing the limits thats what make this hobby so much fun

@sjoervanderploeg4340 3 года назад

Got mine today, the diff only had grease on the outside and was dry on the inside. I'd replace the diff housings with the metal ones, the upper brace bolts into it but has some strain to it. The plastic stripped right out on one of the screws when I fastened it the second time! I've ordered metal housings, hoping those holes will last longer!

@pawanb2771 3 года назад

How can I get those wheels for 124019

@camrowdrone6497 3 года назад

I like point number 8 great information 👍🏻

@t_bagxpress1522 3 года назад

Love to see the brushless conversion on stock gears. Then an upgrade to mod 1 as a speed comparison. I'm very curious to see where this goes 🤔😃

@robertvanginhoven4836 3 года назад

Great series on the 124019! I'm fairly new to the RC hobby myself, just financed my sons Rustler VXL and lots of upgrades. Now finally ordered a 124019 to play with myself. In the Netherlands it is more difficult to get your hands on good parts and advice, so your video's are really helpfull. If you can share moren info on your foam tires and where you got them, that would be great,. Thanks and looking out for new video's from you soon!

@dutch_rc Год назад

Mijne is onderweg. Rij je er nog steeds mee? Bevalt het?

@benstotil9677 5 месяцев назад

Het is een leuk autootje om mee te rijden

@aliffnajmi8992 3 года назад

Ive smashed the bell.. hoping the Mod1 Modification Tutorial come early..

@DriftomaniacsRC 3 года назад

shooting it Sunday!

@Apocalypse_666 2 года назад

Fantastic video mate!!

@michaelinzitari 3 года назад

Mine just arrived. Had hardly any grease in diffs. Came with metal hex hubs not plastic. The rear metal shock tower was bent. But I ordered aluminium upgrade kit anyway so just installed that. Besides towers I’m using the alu hubs and caster blocks. Not going to install arms or turnbuckles. Steering rack upgrade is supposed to be a straight swap but stock doesn’t want to lift up for some reason

@Chivs77 3 года назад

If you already have an opentx multi module radio, then the standard esc runs on the xkx420 or tiger protocol. You just need to swap channel inputs on your mixes, I run mine on a radiomaster tx16s without issue due to the above 👍

@SlussmanSr 3 года назад

I am still waiting on my 124019, and I am going to upgrade it to brushless, but I don't know where to purchase the Mod gearing you are talking about. Can you tell me where to get that?

@ticktock858 2 года назад

Thanks for the tips. I would love to see any mods that would make it run better and increase the longevity of the car.

@brianmuehlher5330 3 года назад

What servo would you recommend (3wire)? I’m currently stalled on my conversion. I can’t seem to find one with the proper dimensions.

@letzvisit1661 2 года назад

Hi sorry I have a couple more questions I want to get a drop in servo for the brushless upgrade what would you suggest ? Also where can I get another servo clip or that plastic clamp that fits around it metal or plastic any links would be great. What motor and esc for in with standard body also which hobby wing would be good? Thanks a million I’m starting my build this week just got the car

@jrc-fabs1634 3 года назад

Cool intro dude great vid👍😎👍

@DriftomaniacsRC 3 года назад

Glad you like it

@joeramirez1761 2 года назад

I am looking to do a motor/esc swap to a brushless one. Though im not sure if i will need to change my servo for it. Do you have an alternative servos that would fit this model that might be worth buying?

@bankbuddiescarpfishing1056 3 года назад

Keeping the stock gearing, I’m going to go brushless to run 2s and now and again 3s. What kv motor would you go for 3300kv or 4500kv. Looking at combo packs and they all tend to be one or the other. Many thanks in advance for the very helpful video.

@aholland6828 3 года назад

Check the specs of your ESC. There are limits to what KV you can run. The motor size you choose plays a part as well. 4500 is fine on 2s. Most recommend under 4K for 3S and under 3k for 4s. Your esc manual or manufacture website will have that info. 🍻

@RandomloserDK 3 года назад

I can't test my modded 124019 as it's so damn wet here in denmark... Someone wake me when it's spring!

@tugrasarchive 3 года назад

3:14 Yesss Please

@KurtsRCs 3 года назад

Nice bunch of tips I'd like to see your mod for the mod 1 gearing

@DriftomaniacsRC 3 года назад

Coming soon!

@nickallen3781 3 года назад

You mentioned foam tires, do you mind providing a link? Thx

@seanr5470 3 года назад

Yes. A simple Amazon link to both the front and rear tires would be extremely helpful.

@edwinnegron7761 3 года назад

you know you are going to convert that so lets get to it, so we can join you.... WOW

@mr.m3837 3 года назад

What battery upgrade would you recommend?

@Totumfacky 2 года назад

My 124019 stops after 3-5 minutes of driving (fast or slow). Just steering stays alive. What's the problem? I'm new to RC cars, this is my first. First day of use was without this trouble. Thank I got some long hair rolled onto the axis next to rear wheel. I noticed that it made strong breaking force. I removed hair and put some WD-40 into wheel suspension. But it still stops after few minutes of play. It happens on original battery and also on the replacement pack (2x 18650)

@runn1nwith5izzorz 2 года назад

I have the 124017, they look nearly identical. I know they aren't but aren't the wheels the same? Can you provide a link for the foam tires you demo'd? Thanks

@dimitriskog6404 3 года назад

Hello link for foam tires? Thanks

@gotahavesome7386 3 года назад

Yes i need foam tires also what are the brand and where to find them?

@seanr5470 3 года назад

Yes. Does this guy ever reply to comments???

@buckreynolds1779 3 года назад

Where did you source those wheels? tHANKS for video...friend

@mariusbolboroc8274 4 месяца назад

Hi, With a 2845 brushless motor (4370kv) and a hobbywing 80A esc, do I get a higher speed than with the stock brushed 550 motor? Thanks!

@roadstar499 3 года назад

i would say upgrades should be done if you feel you need them...but upgrades are nice for many that like getting the most out of their cars.

@kurtschiffke6778 3 года назад

You forgot about changing the steering servo from a 5 wire to a 3 wire servo

@brianmuehlher5330 3 года назад

That was the information I was after! I need a suggestion for a good 3 wire servo.

@rcpete7055 3 года назад

What are mod1 gears Richie??

@alexachie4967 3 года назад

imo, everybody would love to see that monster 124019 you are thinking of doing.

@DriftomaniacsRC 3 года назад

on it!

@GeloOfficialPR 2 года назад

Hi , can you link the foam tires

@chrisf5475 3 года назад

Nice video. I’m pretty sure my stock hex’s are metal though. Still binds the rear wheels if I over tighten. Fronts don’t seem to lock up though.

@Mr.Zepeda 3 года назад

Do a mod 1 conversion Richie!!

@ronduchesne5922 2 года назад

What was the link to the advanced (blue) radio transmitter?

@joekiss7177 3 года назад

I'm trying to make mine a tank. A video on durability!

@blazer6248 2 года назад

So, how do you do mod #1? I'm lost on that one.

@mattm1841 3 года назад

what did you do about the servo? i cant find one that isnt either to small or to large to fit in the car. Cant use the stock servo as its a 5 wire

@blazer6248 2 года назад

How do you keep the steering link from pulling out of the servo arm? On my 144001, the link pulled loose thr first time I hit something and then it was so loose that it come out if I even hit a medium sized bump. So I'm returning it. I literally drove it 2 mins and lost all steering. And continue to lose steering during normal driving on the smaller 144001. I have one of these purple ones on the way, though. And I noticed they use the same exact steering setup as the car I'm returning that broke. It has a steering linkage that connects to an end link and the end link is screwed/pushed into that plastic arm coming off of the servo. So, how do you keep that from pulling out? Or is this not a common issue?

@mikepetitt3617 8 месяцев назад

Stock dog bones and cvds?

@tugrasarchive 3 года назад

How can I have the most long range that is possible for my 124019.. I want to upgrade brushless with a new Esc so I need a new receiver and radio.. Which is the best?? Which has the best range? Should I buy a 2.4ghz boost like the immerson Ghost? Or are there any better? I definitely want to have a range more than 1 km.. 3 or more would be really good..

@al-baghdadi7854 3 года назад

You cant even see the Car after 200 metres

@tugrasarchive 3 года назад

@@al-baghdadi7854 yes that’s why it’s FPV

@tugrasarchive 3 года назад

@Old Soul :|

@ValFPV 2 года назад

@@tugrasarchive you can use expresslrs 900mhz, inexpensive and great range

@tugrasarchive 2 года назад

@@ValFPV also vor 2,4GHZ and 5,8 for fpv?

@MudMonsterRacing4 3 года назад

Rich can you please share the mod 1 gears you used on your 144001 and this car? You never shared them on your other videos either. I wanna do the swap but I have no clue what gears to get. I'm at 73mph on the stock gears. Also if you could tell us the spacer you used on the spur gear that would be great. Great videos.

@MudMonsterRacing4 3 года назад

@@williamperri3437 60 amp esc and 4300kv motor. Gemereric orange combo.

@DriftomaniacsRC 3 года назад

On it on Sunday! (Shooting video that is!)

@yungvet187 3 года назад

Just a ESC and 4300kv motor..no need to change the servo at this point?

@MudMonsterRacing4 3 года назад

@@yungvet187 No servo has to be changed to a 3 wire

@ark9-rc363 3 года назад

Can you send me the link on your tires pls.. love the video ty

@DriftomaniacsRC 3 года назад

contact foams - from amainhobbies if you're in the west, Nitrohobbies if you're in the East

@TallTimbersUSA 3 года назад

Part number for the foam tires???

@joekiss7177 3 года назад

Do the video for mode one gearing

@IThinkNowListenUp 2 года назад

If know you are going to buy a bunch of upgrades, go directly to lc racing emb or tacon which is what this care is based off of. You will save yourself money in the long run with better gearing options and better quality in general.

@letzvisit1661 2 года назад

What size are the droop screws ? For 019? Also I’d it same size for the wltoys 1/10 scale? Can I have links for the metal gears for both size bars also pls

@DriftomaniacsRC 2 года назад

I use m3 x 10

@fabiofboful 3 года назад

Hi, do you know any model of Gens Ace lipo battery that fit on the WLtoys 14001? I am using that generic 2600mah and want a better one. Thank you.

@DriftomaniacsRC 3 года назад

I use the 3s 2200mah gensace one in my 124019, there's a link to the gensace batteries in the description and on that page you'll see it. Hope that helps, they take more charge in than the mah on them! Which has to be good to my mind!

@faintandfuzzies 2 года назад

How about a parts list for the mods?

@v8consumption 2 года назад

what is mod 1 gearing

@edwinnegron7761 3 года назад

do you have a link for those foam tires? thank you

@MudMonsterRacing4 3 года назад

They're contact foams Edwin

@mauritz1774 3 года назад

Can you put an Nitro Engine in?

@andrataylor6070 Год назад

Can I just add a higher pinion gear??

@jasonlaine8449 2 года назад

Can you change this to a drift car?

@nikhilbhatt9114 3 года назад

What shock oil weight do you recommend ?

@DriftomaniacsRC 3 года назад

for speed runs I've 50wt in the back and 30wt in the front

@edwinnegron7761 3 года назад

ok Richie, I have done everything as stated on this video except Mod 1 gearing. I am currently running on a 3S 80C 2200 Mah lipo, running a 3S Esc along with a 5200 kv motor, I have not changed the stock spur gear, I do have the contact tires as well. I have gotten about 74 or 75 at the most right now. Will Mod 1 give me a little more or should I go to the 4S electronics to reach that sweet spot of 100!!!! what say you????

@DriftomaniacsRC 3 года назад

Good to hear, now I would say I think a few more KV's would help on the motor front, when I ran the 104 it was with a 6900kv motor, the car's so light it'll handle high kv motors. That said the 5200kv motor will have more low down 'grunt' to push bigger mod 1 gearing. I have a car in pieces on the bench right now to test out a new 3d mod 1 spur someone has sent me to test - it lets you retain the stock center bearing, evidently some people have snapped driveshafts on mod 1 gearing, it's never happened to me on any of my wltoys cars but I've heard other have had issues but then I feed the power in on those speed runs. Or going 4s would definitely take you there!

@edwinnegron7761 3 года назад

@@DriftomaniacsRC you are awesome, love your enthusiasm for sure!!!!! Just ran it and got 75.3 so I will take your advise under advisement.....

@seanr5470 3 года назад

Where did you find the tires?

@edwinnegron7761 3 года назад

@@seanr5470 on Amazon... Contact RC 30mm 1/10 Nitro Sedan Foam

@plproductions8887 3 года назад

when will the M1 gearing video be out just purchased the 124019 today

@DriftomaniacsRC 3 года назад

nearly done. got tied up with some rc repairs today, and the rain don't get me started on the rain...

@plproductions8887 3 года назад

@@DriftomaniacsRC no worries new to speed runs so just trying to get an idea of what to do to the car. Love the videos by the way.

@StoryLrt 3 года назад

❤❤❤❤❤❤

@visionevo 3 года назад

Just got one of these and already I'm having issues. There's a weird steering and throttle delay. When I steer left or right it gets stuck for about 5-10 seconds. Anyone have any ideas on what I should look into for a possible fix? Thanks!

@joski9030 2 года назад

Oh no I’m worried now I’ve got one here in the box not been out yet

@visionevo 2 года назад

@@joski9030 I got another one plus a few more for my friends... didn't have any issues with the new ones. Pretty sure it was a transmitter issue

@mindbodyandsoul604 3 года назад

can you mak a vid of doing the mods?

@drudown34601 3 года назад

Yes sir im.looking to make mine into street drag car

@drudown34601 3 года назад

Do the mod 1 conversion add the surpass and see what kind of times you can get in 132ft and do you think you could put a 1/10th scale touring body on it

@DriftomaniacsRC 3 года назад

I've been looking for a 'Group C' lemans style body for a while now. I'm debating getting one 3d printed

@jasonholohan2498 3 года назад

I bought one and it arrived with a dead ESC......banggood are very slow to respond to problems.

@2wyldrc195 3 года назад

On Banggood, if you go to the help centre and message Banggood the replies are very fast. Just go through help centre and fill in the form saying what the problem is. They have a a reply guaranteed in 24 hours. The reply goes to the email you set the account up with. Hope this helps!

@jasonholohan2498 3 года назад

Yes, I did that. They responded initially, then went very quiet after I sent them details of the problem including the required RU-vid video of it in (no) action. Very annoying as I just want to drive the thing...

@dalelc43 2 года назад

Do you have a drag RC you raised up for off road? 🙄

@davidtruelove5022 3 года назад

Can you give us a part# for the droop screws? I’ve never seen a droop screw. Yes. Please do the craziest mods you have in mind.

@antongnatiuk6304 3 года назад

Is simply a m3 button head screw about 10-12mm long

@SlussmanSr 3 года назад

David, I have seen a number of other videos and they are just a 3mm shrew, and 10 mm long seems to be the one of choice with the head of your choice, phillips, hex, etc.

@davidtruelove5022 3 года назад

@@antongnatiuk6304 Oh okay. I’m looking at it right now. I see the little hole under the metal flap. I would just put a screw in that hole upside down. Thanks 🙏

@SlussmanSr 3 года назад

@@davidtruelove5022 You screw it in from the top, down. The further you screw it down, the lower the car will ride.

@davidtruelove5022 3 года назад

@@SlussmanSr oh okay thanks guys! This is going to be a great adjustment

@gospelmyxx 3 года назад

I tink a rc car not need upgrades i tink a rc car is Just for fun :)

@GrubbyPaddler Год назад

Like your mum

@arkiepoo 3 года назад

Thanks for the vid. But your microphone quality is very harsh. Hard to listen to.

@Lexusondubs25 3 года назад

what foams for 124019 ??

@DriftomaniacsRC 3 года назад

contact foams either from amainhobbies on west coast or Nitrohobbies on east coast. 26 or 30mm but I prefer 30mm all round at speed. sorry for delay

@EnjoiRC 3 года назад

What is the mod one mod? I bought my GF the 124019 and she promptly burnt the motor. Do you have list where we can source these mods?

@DriftomaniacsRC 3 года назад

If you check out my 124019 videos the list of the parts used on the brushless one is in the description of each video

@EnjoiRC 3 года назад

@@DriftomaniacsRC must have mist it thanks.

@nikhilbhatt9114 3 года назад

What tires did you upgrade too? Which foam tires ?

@DriftomaniacsRC 3 года назад

contact foam tires

@xavsan 2 года назад

good vids, but bad sound

@LordMithril 3 года назад

How dare you ask if you should do such a stupid thing! Ofcourse you should, it would be a crime not to.

@mikeburgessrc5360 3 года назад

Mine got back ordered I’m so upset.

@SlussmanSr 3 года назад

Mine is back ordered till Jan 28th

@mikeburgessrc5360 3 года назад

@@SlussmanSr me too. At first it said January 7th then changed to the 28th.

@joski9030 2 года назад

Mine came within 3 days

@stx333 3 года назад

Good Lord, what's up with that mic?!?!?

@DriftomaniacsRC 3 года назад

Hi I've spent $500 on mic's in the past 18 months....... what's the issue this time?

@leonardotello7329 2 года назад

the mic

@tobydyes Год назад

turn mic down

@mickd1368 2 года назад

i like your videos, but you really need to upgrade your sound. it's so tinny and scratchy i have a hard time watching. other than that, good job

@DriftomaniacsRC 2 года назад

Hi I've spent over $600 on new mic setups over the years and am not buying anymore, check out the sound on the latest videos but literally I'm not spending one more cent on supposedly good mic upgrades, what I am using now works for me. Also note if your connection is poor YT downgrades the feed