Outlet kit needs to be #1.. once the safe is installed ts almost impossible to install if next to a wall.i pretty much added all of these to my Liberty safe.
@@A1LocksmithofTexas The reason for my concern is then the heat dissipation being primarily upward means the bottom of the rod in effect heats the portions of the rod above versus when horizontal it all dissipates up and 'away' ... but you dont think that would be a cause for concern as it would certainly help to not loose floor space. Thank you
@@SolutionsTrust I think it’s worth testing. I use the SafElert to see humidity & temp, if you combine that with a dehumidifier we can test the theory. If the idea is to let the rod heat up and slowly increase the air temp around it, I feel even vertically results would render closely the same. Aside from that strategically placing the rod on the floor in between stocks to be safe. I’ve seen others place them vertically for the same reason you want to, but I’m not sure anyone tested the results with something like a SafElert or similar tool.
@@A1LocksmithofTexas More concerned that it is safe than if loses a marginal amount of efficiency. Have a moisture meter coming soon and will see where things are ... thanks
Just got the Ts36-45 seems pretty nice for the price [$ 588 out the door] . My question is when the door is closed it doesn't seem like it fits very tight. There seems to be a little slack in the bottom on the locking side. Is this normal? Any one else have this issue? Thanks
@@daveirons477 Is that a Winchester? A lot of doors have play, pretty normal. Open the door, look on the inside of the jam and see if there’s any adjusters. If not, email me and I can try to walk you through making your own door adjusters. Some manufacturers have them.
What do you think of the doomsday lock? I’m about to order a fat boy extreme and I have the option to get the doomsday. Can you give me your opinion please. Thank you for your time Darrell.
Hey, Darrell, thanks for reaching out. Honest opinion, I don’t have one because I’ve never sold it. I’ve seen it, I’ve played with it. Not enough R&D from our customer base to give insight. I will say this, I’ve used one from SecuRam several times and it was touchy during instal, but I’ve only had to drill one or two. I think you’ll lose your Liberty factory warranty going with the Doomsday, so I do not like that. And if anyone is generally concerned with EMP protection I always strongly recommend just going with a mechanical lock. I love the concept of having both built in and I get it, but a mechanical isn’t hard to learn, but if you don’t do it regularly it’s gonna be a learning curve in an emergency situation. I don’t like that aspect.
I have the Liberty rod and my safe is only the Centurion and the temp does not change whatsoever. The rod feels warm so it does not warm my safe. A dud
Have you tested the humidity levels in your safe to make sure it working? libertygunsafe.com/products/accessory-dehumidifier-humidity-and-temperature-monitor?_pos=1&_sid=642fd8c9c&_ss=r
