Top 5 Camaro Mods To Do - 2016+ Camaro - ZL1 / SS / LT1 / +

Подписаться 7 тыс.

Просмотров 11 тыс.

50% 1

These should be your first 5 #mods to do on every 2016+ #Camaro! Don't miss this! Well, some of these mods are more vital than others! ;) Looking good is vital to some as is longevity and protection of your vehicle!
Check out the z1lla shop on my website at www.z1lla.com/shop :D There are a lot more products coming soon so check back often! Thank you!
Here are what I consider to be the vital first 5 mods to do on your 6th gen 2016+ Chevy Camaro!
Item(s):
* Mod 1 - CAMARO 16-22 LIFT PADS - zl1addons.com/collections/jac...
* Mod 2 (for ZL1) - ACS COMPOSITE 16-21+ CAMARO ZL1 FRONT & REAR ROCK GUARD KIT - wildhammermotorsports.com/16-...
* Mod 2 (for SS) - 16-21+ CAMARO LS/LT & SS ROCK GUARD KIT - ACS COMPOSITE - wildhammermotorsports.com/16-...
* Mod 2 (for ZL1, alternate option) - CAMARO 17-22 ZL1 DELUXE ROCK GUARDS - zl1addons.com/collections/roc...
* Mod 2 (for SS/etc, alternate option) - CAMARO 16-22 DELUXE ROCK GUARDS - zl1addons.com/collections/roc...
* Mod 3 (front) - 3D MAXpider L1CH06911509 Front Row Custom Fit All-Weather Floor Mat for Select Chevrolet Camaro Models - Kagu Rubber (Black) - amzn.to/3D0NDMj
* Mod 3 (rear) - 3D MAXpider L1CH06921509 Second Row Custom Fit All-Weather Floor Mat for Select Chevrolet Camaro Models - Kagu Rubber (Black) - amzn.to/36AjGXp
* Mod 3 (cargo) - 16-21+ CAMARO ALL-WEATHER CARGO FLOOR LINER - WEATHERTECH - amzn.to/3N8NYRx
* Mod 3 (front & rear, alternate option) - 16-21+ CAMARO ALL-WEATHER WEATHERBEATER FRONT AND REAR FLOOR LINER KIT - HUSKY LINERS - wildhammermotorsports.com/16-...
* Mod 4 - Diode Dynamics Smoked LED Sidemarkers compatible with Chevrolet Camaro 2016-2021 - amzn.to/3wtP1FV
* Mod 4 (alternate, clear) - Diode Dynamics Clear LED Sidemarkers compatible with Chevrolet Camaro 2016-2021 - amzn.to/3NkO499
* Mod 4 (alternate, amber/red) - Diode Dynamics Amber/Red LED Sidemarkers compatible with Chevrolet Camaro 2016-2021 - amzn.to/3JufAi5
* Mod 4 (alternate, vinyl) - PHASTEK REAR REFLECTOR BLACKOUT KIT :: 2016-2021 CAMARO - www.phastekperformance.com/20...
* Mod 5 (zl1, need 3) - 16-21+ CAMARO MATTE BLACK & RED "ZL1" EMBLEM(S) - WILDHAMMER - wildhammermotorsports.com/16-...
* Mod 5 (1le) - 16-21+ CAMARO MATTE BLACK & RED "1LE" EMBLEM(S) - WILDHAMMER - wildhammermotorsports.com/16-...
* Mod 5 (1le, alternate) - 16-21+ CAMARO MATTE BLACK "1LE" EMBLEM(S) - WILDHAMMER - wildhammermotorsports.com/16-...
* Mod 5 (SS) - 16-21+ CAMARO MATTE BLACK SS EMBLEM - WILDHAMMER - wildhammermotorsports.com/16-...
* BONUS (zl1) - CAMARO ZL1 17-22 LICENSE PLATE HOLDER - zl1addons.com/collections/lic...
* BONUS (non zl1) - CAMARO 16-22 LICENSE PLATE HOLDER - zl1addons.com/collections/lic...
* BONUS (alternate) - STO N SHO Quick-Release Front License Plate Bracket - stonsho.com/chevrolet/camaro/...
Peace!
Video Navigation:
00:00 - The Beginning
00:15 - Introduction
01:25 - Mod #1 ZL1Addons Lift Pads
02:55 - Mod #2 ACS Composite Rock Guards
04:41 - Mod #3 Floor Mats & Cargo Liner
06:22 - Mod #4 Diode Dynamics LED Side Markers
07:30 - Mod #5 Blacked Out Emblems
08:26 - BONUS ZL1Addons Front Plate Holder
09:22 - BONUS+++ Paint Correction, PPF, & Ceramic Coating
10:46 - Wrap Up
11:09 - The End :D
The Life and Death of a Certain K. Zabriskie, Patriarch by Chris Zabriskie is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: chriszabriskie.com/vendaface/
Artist: chriszabriskie.com/
#howto #mods #installation #review #diy #chevy #top5mods #firstmods #top5

Авто/Мото

Опубликовано:

22 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@tonyrandal1155 Год назад

Love the video! Installation of victor racing wing was the best visual transformation on my ZL1

@D3RPZILLA Год назад

Thank you!! Victor racing wing?? I'll have to go take a look! Do you have a photo link of your car with it on?

@nuffdoggiggey4103 Год назад

I have the same color SS. You have my dream car. Congrats, that is so awesome ..love to just take a ride to see the difference with the supercharger.

@D3RPZILLA Год назад

Thank you!! Well, maybe if ever down in south Texas sometime! :)

@normanhanna2037 2 года назад

I got a 2021 zl1 1le gray like yours love the car

@D3RPZILLA 2 года назад

SWEET! Best color, IMO.. makes accent pieces/trim POP, but also kind of gives me that Back to the Future DeLorean stainless steel or whatever vibes LOL :D

@JR-hy2mq Год назад

I have a 23 2ss 1le. I have the ZL1 add ons stealth lifts pads red, ZL1 add ons deluxe rock guards, zl1 add on under car tow hooks red, sto n show front license plate bracket, I got my car mat set at high end motor sports you get driver/passenger/trunk mats. They are high quality and I had the SS logo on all of them. July3td car goes in for PPF and ceramic coat along with ceramic tint and ceramic coat wheels and calipers. Great video.

@D3RPZILLA Год назад

Awesome! I ALMOST bought the 2ss1le.. was super close to pulling the trigger until I just said F it and picked ordered the ZL1 back when I bought my car in 2020. Figured I'd just tell my wife once the car showed up, lol... RIP :D Great plan with the PPF and ceramic especially on the wheels and calipers. These brake pads are super dusty... cover your wheels after just a couple miles of driving, lol. Lift pads are essential on these cars IMO.. I've heard and seen so many horror stories of a shop or even a dealer lifting car up on the pinch welds improperly and it partially crumples/bends and when that happens it throws off entire section of the car so much so opening the door will have the forward edge of the door impact with the quarter panel edge!

@JR-hy2mq Год назад

Agreed and I already used them when I put the rock guards on and the tie down hooks. They work perfect

@D3RPZILLA Год назад

@@JR-hy2mq hell ya! I use mine all the time. Have been perfect every time as well.

@w3900 2 года назад

Nice car! How do those lift points work, I would imagine you have to screw them in to place to secure them, aren't you worried about causing rust at the contact points where you're screwing into the pinch welds?

@D3RPZILLA 2 года назад

Thank you! It's coming along slowly, haha. And they have a torx type set screw you screw to kind of help clamp the lift points into place. They don't screw all the way through and kind of just apply some pressure so as long as you don't get superman onto spinning them into place it shouldn't cause any issues with rust or whatever. Prob much less than banging the pinch welds all to hell from using them as a lift point. I didn't use anything like these on my wrx and my pinch welds were super beat up looking 😞

@w3900 2 года назад

@@D3RPZILLA Thanks, and looks good. Do you know if the ZL1 add-ons offer any kind of coupons or where you could get a coupon! I just followed your link and they're asking $89 now for those lift points.

@D3RPZILLA 2 года назад

@@w3900 I believe they usually have a 5% off coupon.. Googling around I just found this one and it seems to still work, "HEADTURNERS" :D

@w3900 2 года назад

@@D3RPZILLA Thanks!

@D3RPZILLA 2 года назад

@@w3900 No problem!

@jameswalker7088 2 года назад

I bought extremely stop brake ceramic brake pads Very little brake dust I suggest you buy some the difference in the dust is outstanding. The Brembo shed way too much .

@D3RPZILLA 2 года назад

Yeah, I'll def be looking at some other pad options but I drive so little the dust doesn't worry me to much yet, lol. When I wear these out I'll take a look at alternatives for sure though!

@Price-mi1hv 2 года назад

Where can I find that front plate kit?

@D3RPZILLA 2 года назад

I list it in the description (kind of easy to miss, oops)... but here is the info copied in: - BONUS (zl1) - CAMARO ZL1 17-22 LICENSE PLATE HOLDER - zl1addons.com/collections/license-plate-holders/products/camaro-zl1-license-plate-holder - BONUS (non zl1) - CAMARO 16-22 LICENSE PLATE HOLDER - zl1addons.com/collections/license-plate-holders/products/camaro-license-plate-holder Hope that helps! :)

@nuffdoggiggey4103 Год назад

How do you add them without lifting your car with no lift pads? Real question.

@D3RPZILLA Год назад

add the zl1addons pinch weld mounts? I just lay on the ground and reach under and can bolt them in place.

@nuffdoggiggey4103 Год назад

@D3RPZILLA I want to try the ones that came with my car.. Do you have any idea if I'm wasting my time with stock SS ones. They came in a bag.

@D3RPZILLA Год назад

@@nuffdoggiggey4103 What items came in a bag? Not sure what we are talking about, lol. Your car came with pinch weld mounts? Or are you talking about something else? Sorry.. video covers a bunch of different items so not sure what we are focusing on :D Lol.

@nuffdoggiggey4103 Год назад

Bitchin car, lol . That comment sounds so weird, but your car is awesome.

@D3RPZILLA Год назад

@@nuffdoggiggey4103 THANK YOU! :)

@DelCalloway 2 года назад

Chinese ZL1 emblems FTW!!! But at least they're not chrome anymore, that's the best part.

@D3RPZILLA 2 года назад

Haha.. seems like 90% of everything coming from China these days, lol. I picked these ones up from Wildhammer Motorsports and they seemed quite nice... felt a bit better feeling in hand than the OEM ones but the 3m adhesive they used was white and you could see like almost a white glow around the emblem when installed so pulled them, removed the 3m, and replaced with a different cut/color of 3m and no issues with the look from it.

@DelCalloway 2 года назад

@@D3RPZILLA I'd be happy to share my Chinese source, $1.98 each shipped with flat black with red or white inlay. You're right, feel way better than OEM being cast! The red inlay had gray 3m, I just got the white so can't confirm it's gray too. I could tell Chinese because the inlays are epoxied in, where as OEM is actually a vinyl decal.

@DelCalloway 2 года назад

@@D3RPZILLA with us have non-ZLEs I really wish they made them in gloss black vs flat. But anything is better than chrome. I skinned my rear OEM in real carbon, really need to actually install it still.

@D3RPZILLA 2 года назад

@@DelCalloway They have a replacement for the zl1 badge in the front grill? :D I could use one of those for sure!

@D3RPZILLA 2 года назад

@@DelCalloway Nice! Yeah, would of been nice but didn't see anything. I don't mind the flat, but gloss would of been a touch nicer and prob look cleaner longer :D

@josemaldonado6915 2 года назад

Your 5 mods sucks 1. Change exhaust 2.Air intake 3.front and rear brake rotors 4.mud flap 👍 5.clear vinyl wrap You welcome dude

@D3RPZILLA 2 года назад

Lol.. kept the first 5 mods fairly inexpensive and easy to do. Rock guards are one of them in regards to "mud flaps" I suppose, lol. Ppf is mentioned. Zero need for front and rear brake rotors as the car already has insane stopping power with the Brembos it came with (for many of the Camaros... The non Brembo models brake pretty well and swapping out new rotors for slightly better rotors to start isn't needed unless they plan to hit be track constantly or something). Intake and exhaust were my next mods after I knocked out the first non performance related mods and would be in my top 5 "performance related" mod list 🙌