Top 5 Tips to Calibrate Govee Dreamview and Flow Pro LED Lights 

and Blue

They love oversaturation and warm colors

And blue

A bit of a old post question, just wanted to find out in ur settings did u use Part or All under colour calibration? Thanks

And orange

if it's blue, then it's usually a sign of over saturation, white but dimmer would be a closer representation but the white should also dim down, there is usually some kind of light emitted

Kom je uit Amsterdam?

@@rainydays2006is Nederlander voldoende ??

Ken iemand die dezelfde naam als jou heeft en die komt uit omgeving amsterdam/purmerend

good tip with that, might be also worth feeding back on the govee app to the team - they might have a fix or even offer rapid replacement

it looks awesome with Drive - one of my favourite light settings in a move

High reds/blue is usually a sign of over saturation or a room that lit in a way the camera is getting confused with the colour aspects. for me it was almost always a combination of both and sometimes Govee App updates can knock your settings out of sync - There's a test screen further in my channel so you don't have to stick the foam on your screen and re-calibrate a few times - I tend to calibrate in as much total darkness as possible

it does sometimes have a bit of lag, I assume that you have the latest version of the app? I would perhaps email Govee through the app they maybe able to identify if it's a defective product and potentially activate the rapid replacement system they have and get a new one out to you

This seems to be a very common issue. I just got my T2 yesterday and had this issue, until I unfolded my Z Fold 3 and switched to landscape view. I've also heard of people having to use different devices to get through this step. Best of luck!

I've put two different ones on this channel, I made it so you don't need to stick those awful things to your TV screen

from the device controls Settings dial (top right) then select calibrate the camera.

Try holding the power button on the light controller down for 5 seconds this should reset the unit (will flash) I think the lights only work on 2.5 so make sure you can select the right frequency. If you still have no luck reach out to Govee tech on the app and they will help or provide a replacement :)

This is a good question and I had not really thought about it until you asked. I’m watch Guardians of the Galaxy 2 now and there’s no issues with the black bars. Colour comes though fine. 👍

I'm just advising what has worked better for me over the last 4 years of using these systems. believe me I have calibrated hundreds and hundreds of times

@@ourtwotube don't get me wrong mate, you did great. It's just weird the system works in that weird way.

@@brobovick I found any additional light in the room just messed with the setup, but complete darkness worked better, I think it's because you are asking the camera to only identify the white of the screen, which in theory should make the other colours easier to identify across the spectrum. a lot of guess work though :)

The app also tells you to keep your TV off and stick on the orange squares. It tells you to have your lights on, because otherwise, you wouldn't be able to see the orange squares. This clearly isn't necessary if your television is on and the screen is creating the squares for you.

​@chriskev5663 I just set mines up last week and the camera had issues until I turned the lights off then I was able to calibrate it

My camera is located on the bottom of the screen

turn on the device, select the video mode then press the setting cog in the top right of your app screen and select calibrate the camera

what is you saturation levels set to?

in a dark room overall I reckon it would look alright, might give you the drive to redecorate the area :)

is it due to the camera position?

@ourtwotube I pretty much got it to work. It looks like it doesn't capture when calibrating but it does.

which setting are you looking for?

I believe the newer models do that when you turn your TV off, mine is first gen so no. When the screen is dark the do dim right down with a slight white effect which is cool

1:Check that you are using a 2.4GHZ connection on your router, sometimes you have to split your router connections into 5 and 2 ghz via the SSD channel 2: Give the lights a reset First, you will need to power up the lights and then use the control box. Press in and hold the power button. While you are doing this, you will also need to press on the middle button a total of 4 times. Once that is done, you just have to leave it do its thing for a while. This will take about 10 minutes to complete. After it is done, all that remains is to attempt to hook it up to your Wi-Fi again. 3: if all that fails contact Govee support via the app, the have a rapid replacement team that are very good at resolving issues. Good luck and let us know if anything worked :)

@@ourtwotube Thanks a lot , unfortunately nothing works :( I am using my mobile hotspot to connect the device and it's set to 2.4Ghz the device connects to my WiFi and Bluetooth but after that the calibration fails giving me the message loading failed try again , I will contact the govee support or just return the item to Amazon and order it again , thanks a lot for your time and help !

@@ccdani2 loading failed is usually something to do with the connection to WIFI also might be worth just resetting your phone just a full power down and reboot then do all the connections again. Do try Govee support though, if they can resolve it, they absolutely will :)

When mine wouldn’t connect to the app on my phone I found that my Bluetooth wasn’t configured on my IPhone to accept a Bluetooth connection from Govee.

@@ccdani2 I had this exact same issue. I'm on three (uk) for my broadband on for my mobile hotspots. Calibration wouldn't work at all. I ended up buying an ee PAYG sim and trying that in a phone and it worked straight away

Hi Chris, I'm 99% confident that they will sync with the dreamview functionality, I have mine synced separate though and have no issues.

@@ourtwotube awesome thank you

I believe you can sync all kinds of products with the dream view camera. Even their LED light bulbs

I have saturation at around 3% and the WB just edging on the light red - each setup or space will prob need a slightly different tweak dependant on your space, if you get the mail calibration correct the tweaks should help things fall into place.

mainly colours, if you calibrate incorrectly you will not get the right colour displaying, most of the tweaking will be in the saturation dial, but it needs to be screen calibrated (camera/screen) in the correct environment first.

@@ourtwotube what do you mean by camera screen calibrated? I'm only seeing white balance, saturation, relative brightness and brightness. Also do you know what the difference between relative brightness and brightness is?

@@tac6044 So when you calibrate the camera via your smartphone (screen) you need to have the right conditions dark room, no other lights and the calibration screen as linked in the video description, this will help get accurate colour. Brightness is the overall brightness of the LEDs - relative brightness you can make certain segments of your lightstrip lower - eg if you set main brightness to 60% and the relative to 50% that segment will show at 30% brightness - I don't bother with relative though

Open the app, turn on the light in video mode, select the settings cog and scroll down to calibrate the camera - it will guide you from there!

If you just change the direction the lights are going on the calibration app that should resolve the issue

@Our Two Tube my calibration loads then claims my lights aren't connected

@@thechosenjuan9877 If disconnecting the plug for 30 seconds and plugging back in does not resolve the issue I would reach out to rapid replacement. Go to the Govee app on the bottom bar goto user on the far right (person icon) under savvy user centre you should see rapid replacement - Govee are very good and quick at resolving or replacing the units

the ones in the app? turn on video mode then hit the settings cog in the top right and select calibrate the camera.

@@ourtwotube Im talking about the demos that everyone uses when showing the T2 effect ive looked on youtube and dont find many

@@daniel243ish I use Fluid Sim Hue Test on YT for most testing, it's basic enough and gives you a good idea of calibration success

Relative is set around 50% and warmer on the white balance scale

Kindly note the video is titled 'Top tips to calibrate' Not 'How to calibrate' The idea being the tips are to help you get better colour and fine tune the lights, they are not based on reading the manual, by reading the manual you would be able to understand how to calibrate. I will of course take on your feedback although I have also taken on board the 109 people it definitely helped as you are the only complainer.