Toro Multiforce Stand On Mower Review GCI Turf MowDown ShowDown 

Loving these reviews, Pete! This is my dream machine. Hope to get this with the bagger, mulch dump, dethatcher, aerator, and snow plow next year. God bless!

Also the trans filters are in each wheel motor and the filter you were referencing is only for the front hydraulic system

One thing you can do with the multiforce is time your oil changes. I usually do them right at the end of fall before storing. At that time, I'd typically have the blower on and the deck off. With that configuration, I can slide an oil pan right under the tube and drain without the deck being in the way. Just wanted to add my input there about the drain tube. For the hydros, there are actually three filters. The one you pointed out in the video is just for the low flow hydraulics (the ram and aux) which prevents FOD from getting into the pumps and the valve box. The wheel motors have two. Just lift the platform up and immediately you'll see two gray plugs with 3/8" square drives. Just put your ratchet and extension in there, loosen, then the fluid comes out and the filter is actually attached right to the plug. BY FAR the easiest hydro oil change of any mower on the market. Kit comes with two filters and O-rings, slap them on fill your oil, bleed, and you're off. The low flow hydraulics are run off of the left wheel motor so the fluid is the same throughout, the circuits are just isolated by the three filters. The deck also has an adjustable baffle (Knob on the discharge side) opens the baffle right up for deep and thick stuff, virtually no clumping after you adjust it.

I've watched quite a few of these videos and I think price could be a factor. Thanks for you work.

Amen brother keep talking. I hear ya American built God bless.

pete- have you reviewed the bradley stand on?? curious. the bradley is more affordable for not only commercial but for the homeowners. thanks.

Great video love having the mulch cart on it

Deck/indicator is off if it reads 4 at the indicator it should be 4 at the blade with a 1/4 inch pitch dealer didn't check that

I wish toro would let me borrow a 36 proline hydro walk behind for a little while not just a 15 minute demo at my dealer in a shop spinning around. I have a 2020 proline hydro walk behind 48 down right love this thing.

Love it

Not sure if you'll see this this late in the game, however, you mentioned the manufacturers need to improve the front suspensions on their machines. Altoz has a unique front suspension system that really helps out. Unfortunately, the only stand in they offer is the TSX with the track system. I love that machine for the brush hog with that i do with it but i would not recommend it for a finish cut lawn

Drop the deck all the way down and place a low profile drain pan or plastic bowl and it will just barely miss the frame and drain into the drain pan. Agreed it needs to be longer though.

I cut a piece a water hose up to my drain line and let it pour out that way into a pan

Hi it’s Andy from Australia out of the 14 Which is the most reliable ? I’m looking for a stander that suits me I’m 5’11. 95 kgs

Absolutely dislike the new style PTO button.

First