TOSHIBA Satellite A505 laptop take apart video, disassemble, how to open disassembly

Подписаться 27 тыс.

Просмотров 131 тыс.

50% 1

Hi!
No music. No talking. Just work.
If you are taking your TOSHIBA Satellite A505 laptop apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that.
So, just watch this video and fix your laptop.
Have fun and good luck!!
regazzz #recycling #recycle #upcycling #zerowaste #sustainability #reuse #environment
#handmade #waste #sustainable #diy #vintage #recycled #demolition #upcycle #design #scrap #repair #disassembly #Technology

Наука

Опубликовано:

27 май 2012

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 167

@sebastianmalinowski6298 Год назад

after 13 years of having this model, this tutorial helped me fix my laptop, power socket was broken and pushed in. Thank you.

@maltrae 11 лет назад

I needed to take apart my laptop to fix the USB port, which came loose. Watched this video twice and felt pretty confident that I could do it myself. I just put it all back together and it's working well enough to leave this comment! No extra screws left over either. :)

@davekidder7640 11 лет назад

I spent $1.09 and I can now guarantee you that these hinges will never give me problems again. Of the four toshibas that we bought last year at Christmas three of them have problems with the hinges. Bad laptop...bad. Again thanks for your help.

@regazzz 11 лет назад

I am very happy with viewer like you! Thank you for fixing your laptop :)))

@gailfletcher6075 7 лет назад

A gem. Tells me I shouldn't try replacing a dead speaker at home, if only for fear of losing one of the screws!

@regazzz 7 лет назад

+Gail Fletcher if you make like a schema where screws are coming from, you should be fine.

@libertypastor1307 Год назад

@@regazzz Or set aside different locations for different sized screws. Thanks for this video. It helped me take mine apart. My speakers were not working, and my computer kept shutting down. Now I know why - the "radiator" fins between the fan and the CPU were almost completely clogged with dust! I hope blowing it out solves that problem. Now I have to find a way to test the speakers to see why they quit working before I put it all back together.

@eskimo227 11 лет назад

Still a very useful video. Thanks. Saved me lots of money and stress

@jfish7981 3 года назад

Thank you, got a disk stuck and this helped me retrieve it

@regazzz 3 года назад

Great, I am glad this video helped!

@megazinein 6 дней назад

Exelente estoy muy agradecido por tu video tutorial, he conseguido reparar dos puertos usb y solo necesité saber cómo abrir o desarmar lo necesario hasta llegar al problema para poder solucionarlo, gracias a ti.

@MystikAzn4vr 10 лет назад

This helped me out a ton! Thank you soo much!

@regazzz 10 лет назад

GREAT! Thank you!

@pauloricardoxavier 4 года назад

Great job! Help me a lot. Thanks

@WreckingCHeckProd 7 лет назад

exceedingly useful, and 1080!!!!!!!!!!!!!!!!!!!! thank you so freaking much!!!!!!!!!

@semco72057 10 лет назад

I have one similar to that one and fairly sure it is overheating and needs the fan cleaned out. It is plenty of work to get to that fan on the Toshiba. So far the Sony seems to be the easiest to get to the fan assembly. I just cleaned my HP Mini 110 laptop fan assembly and changed the hard drive in it. It wasn't that difficult to get to the fan in it either.

@regazzz 11 лет назад

And this is a wonderful news! Good job!!!

@marbleriver3365 7 лет назад

Thanks! Fixed my kbd issue.

@ananto2002 10 лет назад

Many thanks for your effort in showing how to disassembly

@regazzz 10 лет назад

You are very welcome!

@ananto2002 10 лет назад

:o) cheers....

@regazzz 11 лет назад

Hi, in the video I just pulling this keyboard cable out. How to unlock this lock? Easy. Take two little screwdrivers and push this little white things on the left and right side of this lock towards lcd screen... (then slide out keyboard cable) Hope you will fix your laptop!

@kekehondacivic 10 лет назад

very helpfull video,but what will happen if i dont but the screws back in the right place?

@zloyupier 12 лет назад

This is going to be very usefull to me, thanks :)

@P00ters1 11 лет назад

the part i hate about taking apart laptops is..too many damn screws!!!! thanks for this. i was trying to take mine apart but wasnt sure how to.

@EATSxBABIES 10 лет назад

Open up the case, take off the keyboard and CD drive, then use a fine tool of some sort to nudge the DVD towards the right hand side of the laptop. Once you get it closer to the drive slot it's a simple task of pushing it through. I've had this issue before and caused some horrible over heating. Hopefully this helps.

@jorgeborja6281 2 года назад

Exelente tutorial amigo!!!

@nayabgaming0 11 лет назад

ya I have a prb with The Graphic card I know I need to change the whole motherboard but could I upgrade it by removeing my current motherboard to a new plz replay and which graphic card is the best 4r gameing

@lAcxc 8 лет назад

Thanks bro! You help me, shared God bless

@spartansfan1026 7 лет назад

So the CPU package is, unfortunately, BGA, correct?

@dmitrynaumchuk4863 9 лет назад

Hey! Nice vid! I have one question. Using this guide I opened the laptop, cleaned the fan and then closed the laptop. Everithing very carefull. But after that screen not working, I didnt touch anything exept fan. Can u plz help me to resolve this problem. Sorry for my english!

@regazzz 10 лет назад

Hope you fixed it!

@autumnrain1892 Год назад

I love this computer. Had it for 16 years. Lol Just got done taking it apart to fix the changing port. You saved my pocket book. Now i need to figure out how to upgrade it instead of buying a new one. I want to run some video editing software and this is old and doesn't support it. Ideas? If you have a moment that is. ❤ ty!

@regazzz Год назад

Maybe an older version of editing software could work, would be hard to find...

@autumnrain1892 Год назад

@@regazzz yeah... Coming up empty. I was thinking I could replace the graphics card but I don't know if this thing even has one. 🤣 I'm just learning about computers. Can ya tell?☺️

@D84D 11 лет назад

I used this vid to help me figure out how to repair my power plug in. At least how to remove the parts to get to it. I reinforced it and the 2 usb plug ins as well. I re assembled and now have a cursor problem. I cannot reset it (like a mouse) now wondering if I didn't connect something?

@ahsenakber 11 лет назад

Hi I am about to open up my a505 to fix the hinges and clean it up. I don't have any tools. I just need to know what screw driver size do i need. I went to TARGET to buy a screw driver set but wasn't sure which set to buy. There were some sets from Black and Decker but I dint know which one would work with my laptop. Any quick advise would be a great help. Thanks

@brendazamudio2264 11 лет назад

Please help wat do you mean by lock on the keyboard, theres the connector and it wont pull out when i tug on it, how do i get it out without breaking the connector of keyboard. Im talking about the black tape looking thing connected to keyboard please help, how do i take it off so i can dssasemble rest of laptop.

@withintemptation20 10 лет назад

hey there ... i am about to buy a screwdriver set to open my toshiba satellite laptop and clean it from dust. Could you please tell me the size range of the screwdrivers I should make sure fits the screws on the laptop?

@NamxZero 11 лет назад

If something gets stuck in the usb port and the rest of it comes out so i cant grab it, can I take it out by opening the laptop?

@j.lietka9406 7 месяцев назад

What do you do with the laptops you take apart? I got a hold of a Satellite A505, with a Centrino CPU & Vista 😴.

@12287boss 10 лет назад

Was the Cpu soldered in on this model I have the same one and intrested in putting and I7 in thanks

@pablocesarrodriguez5287 8 лет назад

Can i put to toshiba a505 series a ssd disck SATA III ?

@pablocesarrodriguez5287 9 лет назад

Hi, thank you for your post, is very usefull. I have the same laptop, Can i change de micro to i7? Someone told me that i cant upgrade the micro, beacuse it is integrated.

@regazzz 10 лет назад

I am sure a regular screwdriver will fit, but in some places you will need a thinner one.

@regazzz 11 лет назад

I will not suggest, but it is completely up to you! :) Usually people overclocking CPU. But in case of this laptop you probably will be able to upgrade it. CPU, hard drive and memory you can upgrade. Just make sure check compatibility first.

@jpnitafan8463 9 лет назад

can i do this just to clean the inside of it??? My laptop always blue sceen and some one said that maybe i should clean the inside of it? Can you give me an advice...

@50cuzy 11 лет назад

Hi! I have a Toshiba A505- S6965 and i have to clean the fan. Are there any "hardware" differences on disassemble process between A505 and A505-S6965? Thanks a lot!

@MotorCityMob 3 месяца назад

My Toshiba Satellite A505-S6033 laptop used to OVERHEAT so bad, I bought it brand new and within a year or two it was overheating and shutting down. I never got it fixed and it has sat in a box for years. Now I Need a laptop, but I'm wondering if it will cost more than its worth to get it fixed.. I read somewhere this model has thermal paste issues that caused overheating, I think it was either that or some other fan issue, Idk 😢

@lPinkGuy 11 лет назад

Wondering if someone could help. My Toshiba A505 just recently started making this weird noise coming from the fan in the top left corner. It is almost like a clicking sound and occasionally it gets VERY loud like a jet engine. I tried opening it, cleaning it thoroughly, and check to see if any screws were loosed. Didn't solve anything and I ended up messing something up as now my touchpad doesnt work. The connection that is right under the keyboard that it folded in a 90 degree angle

@karlhenselin2 11 лет назад

I have an A505-S6980 which "no one" in my family put a boot password on. At about 6 minutes in, was that the battery there? Can I take off the keyboard, short that for a while, put it back together, and it might work?

@KickYouInTheThroat 10 лет назад

im glad i watched this. i learned that i have to take the board entirely out just to clear out the fan chute. no thanks

@regazzz 10 лет назад

Hello, You are very welcome!

@dben2126 7 лет назад

Ok so I have this same computer...I repaired the power jack but not my touch pad won't work...the black holding piece came loose and now it won't hold...any idea what I should do....

@eskimo227 11 лет назад

There's a few moments in the video that could be trouble for someone new to this. The HDD is bolted down, but that screw is already removed in the video. So it won't just slide out with a small push until that screw is removed. Also, the keyboard connector is already unlocked in the video. Forgetting to unlock that before tugging on the keyboard connector could result in serious damage.

@ahmadabufadaleh608 7 лет назад

A question. can use this laptop wireless card on a Toshiba Satellite p55w-b224 ?

@regazzz 11 лет назад

Added annotation to hdd and keyboard. Although k/b connector is locked, it is stupid that I didn't used some tools to show how to open it. Some people are asking than how to put it back and if they don't see how it was properly removed they don't understand how to properly install it back. My fault! Anyway, thanks!

@regazzz 11 лет назад

You are welcome!

@inesblixen4243 11 лет назад

I have a dvd that slipped into the laptop how can I get it out?

@top5trends444 9 лет назад

help me plsss my keyboard in my toshba laptop is cut off.. how can i fix that i cant turn it caus it says no media find

@midzata 10 лет назад

can someone please tell me what is that part which the technician is unpluging from 14:35 to 14:40? it is some electronic component placed just bellow the bottom of the monitor. fala

@regazzz 10 лет назад

Hello, that was an inverter.

@brendazamudio2264 11 лет назад

Hey my DC Jack broke and I don't want to take it to the repair shop for 80$. Theres the black connector to keyboard. How do I take it off, im afraid it will break, i pulled it lightly and it didn't go so please respond as soon as possible.

@regazzz 11 лет назад

hm, check if both sides of this cable are connected well.

@MikeHF 11 месяцев назад

Fan replacement? If you could remove the bottom first?

@regazzz 11 месяцев назад

Not on this Toshiba laptop.

@mawgwi 10 лет назад

Your video is the best i've seen, i would like to learn how to repair all types of computers, how to tell what is broken, upgrade, etc. maybe start a little business,( i have become permanently disabled from waist down). where do i get started, any advice

@davekidder7640 11 лет назад

Wow...what did that poor laptop do to you. Acutally this was pretty helpful. My Toshiba has popped the screws on both hinges. When I open up the screen the entire face of the laptop (keyboard) tries to lift off. I took things apart but I dont have the parts to repair the hinges...but obviously I was able to put it back together enough to use. Thanks.

@CeeZee123 9 лет назад

I think my video cable is just loose (I get color issues and flickering depending on the angle of the screen). Do I need to take off all the bottom screws or can i go in just from the keyboard side?

@regazzz 9 лет назад

Jordan Lowes If screen problem depends on position of the screen - it is most likely video cable issue. You would need to remove keyboard and a palmrest as well. You will also need to remove a front bezel and take of a screen to unplug a video cable from it.

@meTimetraveler 10 лет назад

good vid

@regazzz 10 лет назад

Hey! Thank you!

@regazzz 11 лет назад

Just buy what you need to on Ebay and replace it! Have a good luck!

@twilomix 10 лет назад

I have a question for you, any idea why I only have sound coming out of only one speaker, and if you know how to rectify the issue

@regazzz 10 лет назад

Either a bad speaker or a bad connection.

@lPinkGuy 11 лет назад

Cont. The connection that is folded in a 90 degree angle and is blue might have broke. The black plastic piece where it plugs in broke off. Could I glue it back in place and it would work? Also I am asking if anyone has an A505 keyboard or fan they don't need as I am willing to buy it.

@jesussantana6705 4 года назад

does anyone know how to reset the BIOS of this computer

@SK1LLEDGAMER 11 лет назад

what can these be overclocked to?

@AndrewWalski 10 лет назад

what did you remove at 4:38 ish the little green chip that kind of looks like an sd

@muffinralf7726 7 лет назад

3 years later, i think the wlan adapter

@timd1833 3 года назад

Some screws on the back are labeled F6 and others F4. Did you remove all of these?...or only the F6?

@regazzz 11 лет назад

Sorry for a very late response ... how it is possible I missed this comment? A505 is like a main number, SXXXX is a trim number that will tell what CPU is and other specs, but everything will be pretty much the same...

@Sumant699 11 лет назад

What is the brand of that power screwdriver you are using there my friend?

@vientodepaz 10 лет назад

what you do with all the pieces?. thanks for sharing your video. regards

@regazzz 10 лет назад

use as parts

@leonardorojas6976 10 лет назад

Hello, good video thank you! one question, I need to repair my A505... the USB ports look like are loose from the socket. Can you tell me please if I need to disassemble all my laptop or only the front part in order to adjust the USB hardware? Thanks again!

@regazzz 10 лет назад

To access USB ports you will need to remove a palmrest. If the USB port is a separate one - you will be able to change it easily.

@dstmotion6153 2 года назад

i have one right now next to me but Its my cousins and he has had it for a while, do you know what year this laptop is?

@AScrapOfKindness Год назад

2009 I had one until very recently -- it started to slow down, so I replaced it.

@Bluuee08 11 лет назад

Thank you!:)

@regazzz 11 лет назад

If you will find a motherboard that comes out from A505 and that will be with better graphic - than why not, but I doubt there will be like that.

@SK1LLEDGAMER 11 лет назад

Thank you :)

@regazzz 10 лет назад

Some screws are regular size, another screws are very tiny. If you do only once in a while repair - don't use a power screw gun, it can give you more problem if you strip a screw. Sorry, can't give you a quick advice, I hope everything went well!

@parxelaria 4 года назад

hola amigaso, se me rompió el cable este 6:22 se salieron del conector, como puedo saber en que orden van para repararlo? gracias capo!

@regazzz 4 года назад

Hola! This is either a webcam or microphone connector. You would need to get to the point where you can remote a screen - disassemble a screen and reassemble it back. Unless you don't need a microphone or webcam (you can check what was it because in this video I am taking apart a whole screen too) If you don't need a microphone and/or microphone - no need to take it apart)

@nabirakashif4026 3 года назад

My charging port of the very same laptop has stopped working. I used to rotate the charging pin a lot to get it to an angle to charge but now it won’t charge at all. What do you suggest I do!! Help needed ASAP !! Thankyou in advance

@regazzz 3 года назад

Replace it. Buy "toshiba a505 dc jack" on eBay and fix your laptop - relatively easy task.

@nabirakashif4026 3 года назад

@@regazzz THANKYOU

@NubbleHub 10 лет назад

I did this by myself, with a different model i've been in a good amount of computers but this was a pain in the arse and the components were really cheap

@regazzz 10 лет назад

***** yep, part are cheap. I just don't buy parts from the other side of a great wall :)

9 лет назад

gracias man!

@regazzz 9 лет назад

Daniel D76 ramirez centurión You are welcome!

@321qmvb6 7 лет назад

I'm not a computer savvy and need your help. I can't get in to my Toshiba A505. so, I will donate it but want to permanently delete all data to ensure isn’t going to be recovered. How do I do it without having access to my files/data? Replacing the hard drive would be enough? Thks

@damianjah 6 лет назад

Hello I disarm my Toshiba and there is a kettle pice of copper I don't know we're it goes can u help me please is urgent

@D84D 11 лет назад

figured it out. a small ribbon/cable under the finger pad was disconnected. Difficult to re install the keyboard and the 2 screws to the metal layer and not disconnect all 4 ribbons. keyboard ribbon is tricky too. uninstalled and re installed 4 times. Now I'm novice!

@ytmm9055 6 лет назад

thanks!!

@DiegoLopez-bx2lt 10 лет назад

great thanks.

@regazzz 10 лет назад

Diego Lopéz You are welcome!

@michaelalfonso873 5 лет назад

can you provide a schematic diagram for A505-S6005

@nonexisting5018 10 лет назад

Oi Mate, I am trying to figure out how the hell to savvy up my left mouse button again. it works, but it seems that it is sunken i. Do I have to tear the whole thing apart to fix it?O_O Or is it as simple as just removing the face plate keyboard bit?

@regazzz 10 лет назад

Johnathin Ankrom you may need to change a whole palmrest, unscrew plenty of screws (sorry didn't have time to respond early)

@heathercopeland8090 6 лет назад

I think somebody ripped a piece out of my laptop there is a slim rectangle hole above the hdmi port what it supposed to be there

@regazzz 11 лет назад

Thanks a lot, I will make annotation about that (4k views nobody cares, as usual!)

@regazzz 11 лет назад

Hello, not really... you may find some fine pliers and try to catch it and remove it.

@drcrane28 8 лет назад

What if i need to fix a metal piece that popped out of the back? Can i just put that back in by using pliers?

@regazzz 8 лет назад

I am not sure I understand it correctly what metal piece on the back?

@drcrane28 8 лет назад

regazzz you know the bits that let you open the computer, they're right in the back, they go into the screen almost

@regazzz 11 лет назад

Hinges are huge problem. And also holes where screw goes. Always cracked etc. Not only Toshiba...

@danielsilvestre2553 10 лет назад

The part that i used to put my usb.its out I need to repared advices please

@regazzz 10 лет назад

Check if this part a separate usb board or it is located on the motherboard. If it is a separate one - pretty easy to replace.

@EATSxBABIES 10 лет назад

OH yeah, but it was a very surprising thing to see let me tell you. Overall it's been a good laptop to me, sadly it is on it's way out though.

@Fobbe116 12 лет назад

Why did you disable rankings I was gonna press the like button

@regazzz 10 лет назад

Hello, fight for your future, don't stop and don't think that if someone already did something similar - you will loose. Think positively but expect all possible and impossible problems. There are tons of videos on how to troubleshoot and fix different things. You may start to watch it and try to fix something simple.

@regazzz 11 лет назад

What is worst thing is if you forgot where screws go if you need to put it back together :)

@mamicholo 11 лет назад

u gotta admit regaz it depends on the persons expertise..a simple layman like myself cant do this i might break it instead. sigh i dont want to buy a toshiba again.

@SSPTHuy 8 лет назад

do you know motherboard info?? please i need it motherboard's information...thanks a lot.

@regazzz 8 лет назад

1. unplug power, remove battery. 2. open memory door. 3 remove memory unit/s 4. find a number starting with V000..... 5. that will tell you a motherboard number. 6. Google for specs. 7. thank me later ;-)