Toyota aygo/citroen C1/peugeot 107 after market radio wiring installation

Подписаться 350

Просмотров 102 тыс.

50% 1

Wiring you need to follow for you to be able to save your radio settings (fm station,equaliser settings etc)
on your wiring harness simply swap the red and yellow wire and thats it.you will be able to set your personal settings.
Yellow Wire - Memory live wire (continuos connection)
Red Wire - Ignition Wire
This method works in most car too. Try it and you will enjoy your new radio

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@first-gen-gamer7030 6 лет назад

Really helpful video life saver mate I was pulling my hair out with my aygo thanks for posting it 👍

@devilishtee3117 2 года назад

The alternator on my car blew and ever since getting it repaired the radio will not turn on, there's no lights coming on the radio at all. Can anyone help?

@DavorPeic 5 лет назад

This is awesome. I just did this with my aftermarket Pioneer and Peugeot 107. Thanks for this tip!

@machielplug6620 4 года назад

Safed my day! Just swop the yellow and red and done!

@ΘεώνηΜαμου 3 года назад

Hi, just tried it and the radio doesn't work at all. Also I tried put them just before still doesn't work

@П.Велев 5 месяцев назад

Do you know how to use it without key in the ignition?

@bernardofigueiredo3370 6 лет назад

Where do you get the plastic frame for the radio? EBay?

@ppstawski 8 месяцев назад

I have a task for you. In Aygo 2019 I would like to switch off the announcment on my stereo that says that I cannot use miracast with my phone. I would like to have gps google maps and display it on toyota screen. Any advice?

@YoutuBerry1993 Год назад

May Aygo has totally different colours and placing. I have no idea.

@jakelinfield 5 лет назад

Hey man! Great video and I finally understand what’s going wrong! I can’t seem to disconnect the wires from the plastic casing though.. how do you unclip them? Thanks!

@-will.shaw_99 4 года назад

Having the same troubles..

@harritaylor9868 4 года назад

@@-will.shaw_99 I just did it with mine. They're tough little buggers. You need to remove both the plastic shielding (I used pliers), then uncouple the wires - they're likely clamped together. I used a flathead screwdriver but there's probably a better way to do that. After the swap make sure there's a solid connection again and put the plastic shielding back on. Good luck!

@yossi4652 2 года назад

Why does a double din headunit turn off entirely every time I turn the switch?? But In my terios it just go to "sleep" and if time pass it will turn off entirely.. Such annoying wiring in c1 ffs

@adri7199 4 года назад

I would like to install a Becker navigator in my Toyota Aygo but first I would like to check the availability of the speedometer signal (GAL) necessary for correct operation (pin 1 of connector). Can you tell me where I can find this signal to connect it to the Becker connector PIN? Furthermore, I ask you if adapters are also required for installation. Thanks

@MrHoudinidog 2 года назад

Radio in place but not remembering radio presets I read something about wires etc the old unit did so if you get bored a video tutorial would be great 😉

@gomanfong4077 2 года назад

The colours in my 107 as for the spots as well are completely different

@ZedNecromantica 3 года назад

I can't pull off the silicone thing from the wires. How did u do that?

@Plentisaki Год назад

Cheers for this. Worked like a charm! Bought a Pioneer unit to upgrade my stock Citroën C1 2012. Took minutes to do, no constant power (live feed) problems, and all settings memorised!

@InspectOry-um8hk Год назад

Hello two questions! Why in the factory radio cd, this process with red n yellow crossing was not necessary, and how to cross them as i used the same cable plug..I have an aygo 1st gen..

@GabrielKleinCH 5 лет назад

The B+ and BATT "iso 10487" are reversed on my C1 in comparison to what we find on internet.

@proworldconnectsalephatsi6665 4 года назад

Informative indeed

@traveler_through_life 4 года назад

Great! Thanks, mate!

@Snappypass1 4 года назад

I have a 2013 c1 and the wiring harness is different to this one, its the Bluetooth model, any help offered to be able to fix this?

@basicmechanic7665 4 года назад

Try not to swap the wiring..might be a straight forward.. check your new aftermarket radio harness and find out what cable is what..then match it up with your original radio on your 2013 c1.. should be easy. Thanks