Toyota Corolla Ball Joint Diagnosis and Replacement with Sounds!

Подписаться 2,6 тыс.

Просмотров 16 тыс.

50% 1

In this video I replace the ball joint on my 2010 Corolla. Is your ball joint squeaking, knocking or complaining? Here's the tool I used to pop loose the ball joint from the wheel housing. It's called a ball joint separator. This job takes about 1-1.5 hours total for both sides if you don't run into any snags.
The tool used:
-www.harborfreight.com/3-4-qua...
2009-2013 Toyota Corolla Ball Joint Replacement Tutorial. Ball Joint Failure Sound.

Авто/Мото

Опубликовано:

15 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@rogerare907 10 месяцев назад

Wow, first video i saw that made it look so easy. Other videos removed axle and caliper and..🤦

@selwyn13 2 года назад

Great video, but next time I strongly suggest you get a camera man so that way we can see close ups and different angles. Other than that, keep up the good work 👍

@justinbieber3957 2 года назад

Jeremy #1

@callmebackfriday2 Год назад

I have a 2009 Corolla and recently it has clunking noise when stop and when start. Since the ball joint is OEM since day 1, I think it is about time to change it. What brand is your new ball joint? Do you have issue removing the 3 nuts on the ball joint? Thanks for the video.👍

@ShareXP Год назад

I don't remember the brand, I'm sorry. It wasn't difficult to loosen the 3 bolts with a small breaker bar.

@callmebackfriday2 Год назад

@@ShareXP Not a problem. There is a MOOG brand but it needs to be grease but I don't have grease gun/grease but they have lifetime warranty. The other good brand is Beck Arnley but only 3 years. Your video just save me few hundred dollars plus $$ for Uber drop off and pick up car from repair shop. Thanks again.

@ShareXP Год назад

Awesome, glad it helped.

@vergelbansill9811 5 дней назад

You Ball joint Have Zerk / NPT Fitting , that means it's Greaseable, Obviously whoever installed the old ones did not know what they are doing because the NPT or Zerk was never installed and it was probably Never Greased.......

@johnmonk3381 9 месяцев назад

Hello, have you had any issues with the ball joint since it's been a year you put it on? I'm torn between getting aftermarket and oem ones, there are videos out in YT which shows wheels bent arkwardly backwards because the ball joint failed catastrophically and disconnected

@ShareXP 9 месяцев назад

Nope, no issues!

@johnmonk3381 9 месяцев назад

@@ShareXP Excellent. Thanks!