Toyota Landcruiser 100 series 1998-2002 key fob programming 

Thank you this video helped us to programme the keys for the automatic locks for the doors, however we had to do another routine to code to the immobiliser, which was just as easy to follow but from a different video. I am so happy because between the 2 videos we have managed to save our selfs over £200 for 5 mins work/effort on what the Toyota dealer wanted to charge for a new key and coding. Thank you again for your help We have a 2001 Toyota Landcruiser Amazon

2002 Sequoia. Have your master Toyota key at hand (black key) 1. Insert black programmed key into ignition. 2. Press and release accelerator pedal 5 times within 15 seconds of inserting key into ignition. 3. Press and release brake pedal 6 times within 20 seconds of step 2. 4. Remove black key from ignition switch. 5. Insert new unprogrammed key into ignition within 10 seconds of step 4. 6. Press and release accelerator pedal once within 10 seconds of step 5. 7. Once these steps are performed properly you will see the immobilizer warning lamp begin to flash and after one minute the lamp will stop flashing. Once the immobilizer warning lamp stops flashing you will have ten seconds to insert an additional key to be programmed. 8. Within ten seconds of inserting key into ignition press and release accelerator pedal once. 9. Immobilizer warning lamp will flash and after one minute the lamp will shut off.

Your halfway door close at 1:34 had ruined my first attempt :D. But it works after 3rd tries. Thanks for your video

you are a HERO! I could not get my 01 4runner into the pairing mode to accept the fob. Using this manual cycle idea made it go in to the pairing mode and my fob paired perfectly. worked first try!

Thank you so much! Worked perfectly on my 2000 LC. This was the only method (manually actuating the lock) that would program my key.

So just a clarification. When done pressing the lock button on the new fob immediately close and open the door or it doesnt take the programming. At least that's what I spent 15 minutes figuring out. Thanks

Worked like a charm for me....can't believe they try to charge so much for so little! 2002 LC

Man you are the real MVP this worked. Thank you!!!

It worked great on a 05/2002 land cruiser. Thank you

Saved me $65 at the stealership. Thanks!

Gabby! This guy is ridiculous!!!!!

Thanks a lot. it worked for a Prado Colorado 2000

It worked the first time thank you very much

Why did you get a new key fob and where did you get it? My factory key fobs wont lock the door but will unlock them sometimes, the signal seems non existent for the lock button but suspect the buttons are old. I’ve seen some on Amazon but I’m not sure what’s needed to make an Amazon key work after cutting is

Thank you for your video, it did help me to program the key fob for my 2001 LC

Worked for me. Thanks for posting

Well done and thank you so much for posting, very helpful

Good video bro, it works in my 99 LC

I can’t seem to get it. My truck gives me the “lock / unlock” to show its ready… but when I press the buttons on my remote I get no response. Tried over 50 times now ahhhh

Thank you...it worked for my 1999 4Runner as well....The other way that the dealer says does not work...

You left out the last step. After holding lock for two seconds, the last step is to shut the door, then you can test to see if it worked. Do it any sooner and you fail to link the fob.

hello does it work with the original key to start the sequence then push the button of the new key fob ? thanks

It works with my 98 Cruiser , now I need to program to turn on the engine, do you have a video for that?

Did you need the master key to program the key?

Thank you!

Everything works and my car locks and unlocks automatically but nothing happens when i press the keys on the fob. literally nothing. Might be a faulty fob ? I changed the batteries recently the red light comes on but idk why it doesn’t work

Thanks. its work

Good work

Thanks for the Video! I programmed the key to open the doors but it still does not start the car. It just cranks. Any idea what's going on?

Thank You for the video.

Thanks!

Someone knows if it works to program an imobilizer code in a new key for toyota corolla CE110 ? Thanks a lot

Have you ever done a Toyota Passo?

Thanks a lot

Is this a cheap Chinese key or does it only work on keys from TOYOTA. any help appreciated PS nice work

more land cruiser tutorials please

Please tell how to 2003 to 2006 Land cruiser remote programming

Hell yeah, man!

is it working on 2007 toyota land cruser?

is it working on 2006 toyota land cruser? many thanks

can it start car after programing

How did you change the center console to an after market stereo in? Can you help me out with a link or the part number for the Air control unit at the bottom? Mine is at the top above the NAV system. LX 470 2002.

Sir these key is chang

do you know why the key wasnt accepted ?

What were you doing wrong initially that did'nt work?

Thats a key, not a fob

لا يله الى الله

You really talked too much in this one