Toyota P0051 - Diagnose and Repair

Подписаться 914 тыс.

Просмотров 135 тыс.

50% 1

Come along with Eric O at the SMA shop as he has a look at a P0051 on a 2008 Toyota Sienna. He shows how to diagnose and repair an AFR / O2 Heater Circuit Code the right way. We also get a look at a new DIY type scan tool that will be featured in some up coming videos. -Enjoy!!
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the S.M.A. "A-Store" and help support the channel! : astore.amazon.c...
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
THANKS A MILLION!!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 268

@dil6969 7 лет назад

The content we have at our fingertips is crazy. Just 10 years ago videos like this were rare. If you wanted to learn what it's like to be in the field, you had to go in the field. As someone who's just a few weeks away from starting work as a technician, these videos are invaluable. I'm starting out with a much greater knowledge base to draw on than any beginner you'd typically see, and that will be instrumental in my success early on. You, Ivan, Keith, ScannerDanner and EricTheCarGuy are a big reason I have successfully diagnosed countless problems with friends and family vehicles, as well as my own. And the knowledge I've gleaned from all these channels is only going to get more valuable when I start doing this for a living. Thank you.

@SouthMainAuto 7 лет назад

Glad to help any time Dylan

@Sandbag1300 7 лет назад

At 8:13, "snug it up to factory specs, of course....Click". It does not get better than that!

@Starcrunch72 7 лет назад

a la Elderly Iron.com

@SouthMainAuto 7 лет назад

as long as you hear the click you know it is right!

@MyMickey50 7 лет назад

You need to do a Scotty Kilmer grunt when tightening to factory specs!

@ericeiler7016 7 лет назад

Thank you Eric O. I am no longer a parts changer just hoping to fix my car. Test, Test, Test and verify. 👍

@heyitschinoable 7 лет назад

Same

@SouthMainAuto 7 лет назад

That is right , always test first and learn how to verify first

@wymi 7 лет назад

The SMA Motto: Test but Verify

@robertflock1520 7 лет назад

tell your friends. lets get him to 100,000 subs

@Sandbag1300 7 лет назад

And support SMA on Patreon! This content is gold for the DIY'er.

@bamawild2355 7 лет назад

Here down south we laugh at o2 and Evap codes. Put a black sticker on the instrument cluster and keep truckin.

@hanskinslo326 7 лет назад

"Son of a pumpkin." Eric, you are awesome.

@spelunkerd 7 лет назад

What an excellent review of how to do things properly and efficiently. Good diagnostics don't have to be slow, and you don't need a lot of fancy tools. Regarding the antiseize, most of the O2 sensors I've put on come with their own little packet or have it on already. Maybe it's becoming an urban myth, but I've read a few times that the wrong antiseize can mess up the O2 sensor, presumably by mucking up the sensor end in some way. Does anybody know more about how that happens? I suppose when it gets really hot, you could change the local oxygen concentration around the outside of the sensor, changing readings. Or, maybe when really hot the wrong antiseize could drip down onto the end of the sensor, covering the end that needs to sample the exhaust gas.

@SouthMainAuto 7 лет назад

I think you are right in the sense that people may put on to much. I use a very small amount of copper never seize just on the threaded portion

@thebandmcomputer 7 лет назад

Great video Eric....I laughed at the beginning of the video because I don't think Mrs. O realized she was on video when she was bending over doing who knows what.

@mib20000 7 лет назад

I seen that . she was mooning us

@SouthMainAuto 7 лет назад

Lol yeah she was painting a coffee table

@mfsperring 4 года назад

First thing I noticed too. Had to stop video to see if it was mentioned in the comments. I knew it would be. I'm not sure I want to know what that says about us, lol. Now back to concentrating on the other content. :)

@marcodm 7 лет назад

can that actron scanner diagnose my 2003 liberty abs light?? (and abs in general) like tits on a pole! 😂

@bodgitandleggitgarage 7 лет назад

I think you need to calibrate your torque sensor I only heard one click don't forget about the Grant torque setting lol I've had people comment on my vids saying it is impossible to get the wrong parts from the dealer happens more than they think

@OneAuto 7 лет назад

I think Toyota specify medium 'grunt' torque setting for this vehicle Leon?

@SouthMainAuto 7 лет назад

I uses "uhgs" instead of grunts...

@aussiebloke609 7 лет назад

Medium grunt torque spec? Sounds like Leon. Good to see ya, mate! :-)

@bodgitandleggitgarage 7 лет назад

aussiebloke609 cannot beat the Grunt torque specs 😁😁😁

@wyattoneable 7 лет назад

Your kicking videos out like Vanessa and the kids left on vacation without you. This was a simple test but as usual, your commentary and tips added a lot of value. I'll be hanging around for more information on that Actron. My local mechanic uses one...in fact, I think it's the only scanner he has.

@InsideOfMyOwnMind 7 лет назад

wyattoneable yep. Kick in em out like a welfare mom.

@SouthMainAuto 7 лет назад

Haha, yeah it is a good scanner but should not be the only tool of a professional shop. It has to many limitations. It is not my opinion it is just a fact. If you run a pro shop with this as your only tool, your days are numbered...

@wyattoneable 7 лет назад

Oh yeah, our local guy is a parts changer.

@MyMickey50 7 лет назад

I got the 5 dollar OBDII from Amazon - bluetooth to my Android phone... saved me mucho grande deniro!

@mraccord92 7 лет назад

first! morning routine on hold now..

@e13c7r0nic 7 лет назад

I love waking up to a new SMA video. I feel like a kid waking up to Saturday morning cartoons :)

@Paul1958R 7 лет назад

Thank you Eric for another great video. I have the Actron CP9580 which I bought in 2010. It is good basic DIY code scanner but only accesses limited PIDs but I am happy with it. God bless you Eric O. Paul

@wearevergold6478 7 лет назад

Got the p0051 Blues? That Beefy Juicy taste! Need a little excitement? Snap into an AFR sensor! OOOHHH YEEEEAH!!!

@klystron1 7 лет назад

love your videos! keep up the hard work. should have a million subs.

@anthonyiwuoha5089 5 лет назад

Thanks bro. YOU ARE GREAT Love your video.

@bradnimbus4836 7 лет назад

Gotta love that friendly Prospector Pete "Welcome Back"! Thanks for the upload Eric. SMA makes my coffee taste better in the morning

@SouthMainAuto 7 лет назад

Thanks Brad!

@WoZIMoo 7 лет назад

I like the subtle AvE references. Skookum as frig.

@leedress2187 7 лет назад

I haven't had the chance to work with the actron scan tool, but the Autel MD802 is a GREAT DYI scan tool. it gives you make specific codes, ABS/SRS Transmission, etc.. totally worth the 200 bucks it goes for.

@Rookie_DIY 7 лет назад

son of a hu ha. ha ha ha. You are awesome Eric

@mahlerob 7 лет назад

Thanks so much for this Sienna video. I was beginning to wonder if anyone in your neck of the woods drove siennas. I have a 2004 Sienna with over 220,00 miles and it's been a great car.I just changed the bank 1 sensor 1 AFR which was quit a bit harder to get to, especially lying on cardboard on my gravel driveway. And guess what , I use the exact same Actron scanner. Do you have many siennas in your area? I really love your channel. It's the best.

@SteveRobReviews 7 лет назад

Actron Eh , I always go with bank 1 or bank 2 them guys at toyota don't know their left from their right. LOL

@SouthMainAuto 7 лет назад

I try front or rear of engine and we still get it wrong haha

@mr.nobody9630 7 лет назад

That was EASY, Eric O. A + Rating

@stewart4295 7 лет назад

Thanks Eric, Americans are very willing to share their knowledge on RU-vid, and thats a good thing, regards, Stewart, Australia.

@SouthMainAuto 7 лет назад

Better out than in I always say

@Krillekris 7 лет назад

You are so good at finding alternatives to cursing, love your way around it :-P I got a Autel MS906 as a DYI tool, but the MaxiDAS DS808 is cheaper and looks nice as a DYI tool.

@SouthMainAuto 7 лет назад

Try to keep it rated G

@randylooper2346 7 лет назад

I can feel your frustrations on getting wrong part or just waiting forever on delivery driver, time is valuable in auto industry esp when you have to make money i really appreciate your videos mr. o. I want to thank you for such educational videos and what you mean to the youtube community

@andrewadams7439 7 лет назад

one word...Wow mechanical genius South main auto and eric o are my idol love the knowledge keep it coming i watch your channel for hours i love it and tell every body bout it at my shop now at lunch we all watch you lol haha!!!!

@SouthMainAuto 7 лет назад

haha idol!?! Your nuts!

@andrewadams7439 7 лет назад

your thorough work speaks for its self lol

@NewLevelAuto 7 лет назад

Terrific job as always brother. Now don't put out a video for a few days so I can release mine 😁

@SouthMainAuto 7 лет назад

OK haha I will give you a one day window.. is that enough time?

@fieldsofomagh 7 лет назад

Can't wait for the Action review, need it right now, patience has bottomed out----- Where is my review ??? this is an emergency !Tell the customers to come back next week an there's real work to be done.

@mailman7478 7 лет назад

I say useless as tits on Caitlyn Jenner

@joe2mercs 7 лет назад

As useless as an ashtray on a motorbike!

@heyitschinoable 7 лет назад

joseph prosser now thats funny 😂

@SouthMainAuto 7 лет назад

Haha good one

@FunktapusGaming4Lyf 7 лет назад

That beautiful sound of a tool tumbling through the engine bay and hitting the ground below...;)

@DigBipper188 7 лет назад

8:10 WOAH!

@MrPhetaste 7 лет назад

hmmm werè geting spoiled, a smar ewer`y day.. as allways Eric great video...

@jonathanfreedom1st 10 месяцев назад

Just makes you wanna slp silly whoever invented the check engine light. Toyota loves em, you get a Loose gas cap and you suddenly have AWD Vehicle stability control, maintenance, oil change low washer fluid low air pressure and reduced power, low voltage and check Guages lamps all light up to create that Lovely Romantic Glow you can sip your Boones farm to. 🤣🤣🤣🤣🤣 waiting till next payday.

@xerxes456 7 лет назад

I remember the early 80s when they scared you to never use a test light for many years I thought that was the real deal. Great as always Eric.

@richardabner9420 3 года назад

I have 2009 Sienna LE 3.5Lv6 with a P0051 error code bank 2 sensor 1. I’m having a difficult time deciphering the correct Denso O2 sensor part number for the correct part. Might you be able to provide me with the correct part number. thanks in advance

@UtahDarkHorse 2 года назад

I know this video is dirt old now, but would like to know which Actron that is. I had a 9690. it wasn't all system, but I needed it because it did OBD1. Otherwise, would have gotten the 9695. Anyway, I liked it. Have a better one now. Thanks for yet another great video!

@jimg7423 6 лет назад

You saved me a bunch of cash. Thanks I can't believe the price difference between our auto repair guy and Amazon. I just know someone is making a huge amount of money for nothing

@dwaynerattan6749 3 года назад

Hi i did similar test on 2002 Camry 1AZ-FE the light comes on when i first start the egine but turns off after 15 seconds. If i clear the code light comes on 15 seconds then off again. Is that the expected behaviour?

@johnaclark1 7 лет назад

A friend brought me his 05 Accord 2.4L the other day that was setting the MIL intermittently. When I scanned it it was showing P0141 (B1S2 heater code) stored but not turning on the MIL at the moment. I did these same tests, expecting to see an open or real high resistance but got around 8-9 ohms on the heater which comes to only about 1.5 - 1.7 amps. I backprobed the heater wires, connected my Vantage meter, and saw a nice PWM square wave for the heater from 0-14 volts while the engine was running, so obviously PCM and wiring to the sensor check out. I thought the heaters always failed open but it seems they can go intermittent or just slightly high, too. I found a spec in my 07-10 Odyssey factory service manual (assuming they're the same) for the rear O2 heater and it gives 5.4 - 6.6 ohms. I can only assume the heater is either failing intermittently or just going high enough resistance to set the code when the engine is cold. Will find out after I put the new sensor in on Friday.

@SouthMainAuto 7 лет назад

I have seen them fail intermittently for sure. Eventually it will go open

@johnaclark1 7 лет назад

First time I've seen it intermittent. It's always been open when I've checked one with a heater code. Thanks for the confirmation of that! I couldn't 100% verify the bad sensor, since heater resistance can change with heat, other than ruling everything else out.

@InsideOfMyOwnMind 7 лет назад

johnaclark1 Big huge major thing to point out with the repair of anything electrical, mechanical or even biological, every possible failure type can and does often present as intermittant unless of course you're talking about catastrophic failure of a given component. Anyone with experience will treat every diag process as potentiality intermittant in the way they handle things like harnesses, connectors, sensors, etc. If you were to try (and why would you) you could turn 80% of those "sure deals" into intermittant nightmares.

@Graveltrucking 7 лет назад

Come on now I know you want to drop the F bomb, people should know mechanics do have spazzes and throw things, I know I do when I'm fighting something and its not co-operating. People know not to come around when they hear the F bomb being dropped.

@Badgertronix 7 лет назад

Autel is the entry level scan tool of choice according to the Staten Island master. Well that's what he sent me anyway 😎

@opl500 7 лет назад

I guess most guys would've just manned the parts cannon.

@geraldsanford2411 7 лет назад

parts cannon had a faulty trigger

@davidgoliath982 7 лет назад

u can get denso sensor from rock auto for under $100. I believe it is same sensor without Toyota stamped on it. if it is practical to wait. they have a warehouse in new York. might get lucky

@jonathanfreedom1st 9 месяцев назад

I have an 11 sienna AWD same code same bank 2 sensor 1. Is that the same location? Just being sure....??? Also what Is the part number?

@Bekim8310 7 лет назад

Awesome video Eric! I am one of those viewers thats waiting for you to put out a video on the best diy scanners. I know you mentioned it a while back. For me it has to be the Autel. Give us a nice in depth review! Thanks man!

@SouthMainAuto 7 лет назад

Coming soon

@lightningsmokerXx 7 лет назад

Early Squad

@SmittySmithsonite 7 лет назад

Parts are ALWAYS wrong today! What is happening out there??? Seems like a daily occurrence now. :( We need some QC!!

@jonathanandrade4913 Год назад

Where can I get that sensor for Toyota Camry xle 2005 v6 3.0?

@andrewvillanueva4222 7 лет назад

l changed the 02 sensor and the code came back. p0051. any suggestions

@opl500 7 лет назад

Guess the parts cannon is having trouble today

@emtscythe3782 7 лет назад

When that socket started to fall I instinctively froze and listened for the hopeful sound of metal hitting concrete!!!!!

@shaneharrison4775 3 года назад

I think we all do that lol almost every time too

@braydenstills2177 Год назад

is this code strictly for the front o2 sensor i have just replaced my front o2s but im still getting the code

@bond1j89 3 года назад

Decent vid but you don't go into checking if the problem is not the sensor very deeply.

@MadMattz76 7 лет назад

Thanks for the video. I have this same year Sienna, so some good info. I dread the day I would have to access anything on the rear bank on this thing....

@SouthMainAuto 7 лет назад

Yeah they are a little snug back there

@scottfirman 7 лет назад

Isn't that just the way it goes? You figure on getting the correct part OEM and they muff it up. The subaru Forester we have has had 5 different changes made during the build. I am not looking forward to doing any repairs to it knowing that. I do know I have to use the VIN to order anything for it. Even then, yeah,I expect issues.

@ladale21 7 лет назад

second

@damienbell3155 2 года назад

Hey bud what was the part number bank 2 sensor 1. I don’t want to run into the problem u had

@Chris_905 7 лет назад

another brilliant video , looking forward to the code reader review as im in the market to get one myself ,they seem a very usefull tool for the toolbox , thanks !

@SouthMainAuto 7 лет назад

Yes they sure are

@blessedbonesautogarage3167 4 года назад

Excellent video, having same issue with my Toyota 2008 RAV4, will try it out and revert back to you. Thanks,

@aboutmyfathersbusiness8324 7 лет назад

Holy guacamole! I dont have all the Verus rigamarole but I do have a 8 year old Actron!

@SouthMainAuto 7 лет назад

Sometimes that is all we need!

@garageworker 7 лет назад

Eric, you should take a look at the Autel MD802 or the Autel diaglink for $110. They both do live data and mode 6, would love to see what you think of them.

@BryanMecklenburg 6 лет назад

Thanks for taking the time to make this great video. The Toyota OEM part number for this sensor is 89467-08070. It will cost about $223 plus tax at your local Toyota dealer. I bought my part on Amazon from a Toyota dealer in Daytona Beach Florida for $155, no tax, no shipping. Toyota gets this part from Denso so another option if you don't want to order the part over the Internet is to go to Advance Auto Parts. They sell Denso #234-9049 for $159 plus tax.

@JPilot2 7 лет назад

G'day, Mr. O! I am Sharing... A very useful tool! (Actron - CP9690) "The tool use is very straight forward and intuitive. Within 10 minutes of playing with it you have most of its function down. I used it to read a check engine light. Read P0420 which is catalyst inefficiency. I let the car warm up and then selected live diagnostics. You can see all the PID's or you can create your own custom list. I like that feature. I selected the PID's relevant that I needed to see to confirm a diagnosis. Short and long term fuel trim shows me that the engine is running rich (too much fuel in the mixture). Coolant temp is spot on. Voltage feedback from the O2 sensors showed me what I needed to see. Then I recorded a short 5 min drive, and graphed the data. Downstream O2 sensor is all over the place. Verified that the O2 sensor is working properly. P0420 in my case is a bad catalytic converter." Plus, the scanners troubleshooting is a nice feature as well. Useful for Veterans, and inexperienced wrench turners alike, It gives you a checklist so you know where to start and where you should start searching next. It certainly help to save money by not throwing parts at a vehicle. Thank you! Cheers! :-)

@theoldwizard998 7 лет назад

I am anxious for you review ! Your old one was a CP9580. That is a CP9690. The only down side to that model is the current software only handles ABS and SRS up through 2013. It would be nice if it handled tire pressure monitors. 4 years is a long time without updating the software. Actron is now owned by Bosch and that model looks identical to the Bosch OBD 1350. I also think Mac resells the same one. Bosch also owns OTC now.

@joesmith6524 5 лет назад

cars are a pain in the ass inless your rich something breaks u buy another car!

@philby49 7 лет назад

Ok EricO, thing is I am soon to move to BC Canada, in UK right now, I am 63 yrs old and retiring, what you have shown here is how honest and trustworthy you are, I have learned lots about North American vehicles from watching your vids, (I did 20 yrs as a mechanic here in UK when younger) if I were closer when I moved to BC I would come to you for all my vehicle needs, which made me think, your next step could be featuring customers who travel just to get you to fix their vehicle, as I think that will be pretty common soon, in fact maybe buy yourself an old Motel to put them all up, I would happily be one of those customers, either way, another great logical fix top work, Dave

@AP9311 7 лет назад

Eric O, great vid!! I've been on the market for new DIY scan tool, boom. you were doing it. Holy smokes, you been reading my mind, lol!! I missed couple videos due to lack of notifications. but this one did notify on my phone! yay. I finally caught up! I'll wait for your reviews first before I'll buy. Thanks, later, my friend!

@andykidwell6187 7 лет назад

Nothing is more frustrating than getting the wrong OE part from the dealer. Getting the wrong part sent is something i'd expect from Advance but you pay more from a dealer for what should be the right part the first time. I know, my expectations are way too high :-)

@clintonandrews1538 7 лет назад

Hey Eric, watching your handy-dandy magnetic LED work light, I'll bet you don't miss your trusty ole' 100W incandescent combination drop light and branding iron.

@jonathanfreedom1st 10 месяцев назад

Just Subscribed, As a mechanic myself.... I think it's good ethics and Transparency to show customers what you are about. Cheers from Toledo

@63256325N 6 лет назад

It's a real shame the people that are working at the supply houses can't read. What's become of Americas education system.....Thanks for the video.

@Mr424538 7 лет назад

Hey Eric the scanner you used in your video appears to be the same as the Bosch Obd1300 I use. Maybe it's just a rebrand? Either way I'd like to see what you've got in store for it. Keep up the good vids.

@sethfust3675 7 лет назад

Have you ever run across a zero fire issue on a 1997 dodge with a 5.9 in it???? Coil is new plugs new rotor is new crank position sensor is new. Any help would be appreciated

@theoldwizard998 7 лет назад

Bosch replacement sensors (not that I would use a Bosch O2 sensor on any Japanese car) solve the short/long cable problem by only selling ones with long cables and they include a zip tie !

@lightningsmokerXx 7 лет назад

Eric i am slowly dying inside until that Krown Video is posted.

@SouthMainAuto 7 лет назад

Coming soon trust me!

@richardcranium5839 7 лет назад

see how you are lol i just picked up an otc . researching them the otc bosh and actron seem to be the same. you got the one with the changeable cables.since i wont be working on german or obd1i opted for the next higher model.took a long time for the first firmware update but i can print from it and do a couple other ford things.will be really interested to see what you can do .

@SouthMainAuto 7 лет назад

Yeah Bosch/OTC owns Actron

@richardbambenek2601 5 лет назад

I made the fatal mistake one time of driving 300 miles to replace a computer part only to find the part I got shipped to me was wrong. Never made that mistake again.

@shahsmerdis 6 лет назад

Have you ever noticed the difference between denso/OEM? usually there is a good reason if OEM is 2-3x the price.

@hyenathug3056 6 лет назад

Hi Eric: How did you get the a/f sensor test light. Could you share the link? Thanks God Bless you and your family

@bobl78 7 лет назад

somehow you have a different scanner all the time...are you testing t`hem our you have that many ?=

@SouthMainAuto 7 лет назад

I have that many :D

@jdub6782 7 лет назад

the o2 socket hit the floor.. .sweet...!!!! .too much time spent LOOKING for tools eaten up by the engine compartment...😁

@edwardgomez1700 4 года назад

Hey Eric did you make that test light used in 4:35 by any chance?? Where did you get it I want one like that, easy to probe, great video!!

@melvinjohnson7033 7 лет назад

Good vid as always. I have the OTC 3211 which I believe is identical to your Actron.

@int53185 7 лет назад

I still use my nearly 20 year old Actron to do quick checks and resets. You can't beat their reliability.

@professional2.09 6 лет назад

Great video I would of failed on checking the signal out thanks Bank 1 and bank 2 what side is what I believe you not the internet lol

@chopaholics 5 лет назад

Im so hooked on your videos cause the way you diagnose vehicles you inspire me to diy my own cars just wish you where here in Georgia so you can film my car too god bless

@jonbarfield4915 7 лет назад

Eric you got lucky. My Nice's car is a 2002 Kia Sportage. The O2 was toast so my brother in law tried to change it but stripped the head of the O2. I get over there take the exhaust shield off and found the manifold was cracked in 2 places. Then good old Doorman!!!!$@×÷%% you know the rest. I have a KW 808 scanner.

@SouthMainAuto 7 лет назад

Dorman!?! Nooooooo!

@jonbarfield4915 7 лет назад

South Main Auto Repair. it was my brother in law. I warned him

@bigdaddymak1439 7 лет назад

Denso is owned by Toyota I believe!! Or 25% but there are Denso parts all over Toyotas!!

@InsideOfMyOwnMind 7 лет назад

bigdaddymak1439 Sort of like the old Kiki Diesel name on Isuzu parts. Or was it Diesel Kiki? I forget.

@aussiebloke609 7 лет назад

"Good enough for the girls I run with"...sounds like someone's been listening to AvE. LOL

@luischavez6391 5 лет назад

What bulb did you use to check heater control from ecm? Is it a regular 194 bulb?

@sweetwilliam49 7 лет назад

What I'd like to know is why I need a heater circuit. What happened to if the heat gauge says warm cut the heater on?

@davidshabazz7900 4 месяца назад

My sensor reads 16.4 ohms is this bad

@geraldsanford2411 7 лет назад

great video ERIC O

@Uticagreens 7 лет назад

Actron OBD2 tool use video would help. Thanks

@Lemmy117 7 лет назад

If you happen to know, out of curiosity I was wondering if this sienna is a 3.3L?

@khoayeuha 5 лет назад

what's the part number and what model sienna this work for? My 2009 sienna got a check engine, VSC, trac off lights and Autozone scan threw the P0051 code. Is this situation the same issue?

@richardabner9420 3 года назад

did you ever find that P0051 o2 denso p/n ?

@khoayeuha 3 года назад

@@richardabner9420 took out the sensor and took it to AutoZone. They got the exact same denso part. It's $100+