Looks great. Im considering this bumper for my 2021 TRD Pro. Will it fit a light bar inside the bumper in the area above the winch and still have room for the winch to operate normally?
The winch controller must be relocated on this CBI bumper as well as the CBI Baja style bumper. If you're interested in the relocation brackets I make in this video. Please reach out to me at Marcustomz@gmail.com
Thanks for the info. 2 more questions. Do you have the TRD Pro skid plate? If so, did you insert the bumper under or above it; for the 17mm bolts. Speaking of the 17mm bolts, any suggestions/recommendations on where to source longer ones?
@martinez7385 Great questions. I installed the bumper on the frame of the Tundra and the TRD skid plate 2nd. You will need 4 longer bolts washers and I suggest lock nuts that CBI doesn't include. You can souce these bolts at your local hardware store. I'd also like to suggest you purchase som 1/8 shims to place between your bumper and frame. Sometimes, they are needed due to frame measurement tolerance being different from vehicle to vehicle. As well as Aftermarket bumpers tolerance. You definitely don't want to over tighten a bumper that has over a 1/4 gap between the frame mounting surface. I hope this helps.