My router sends a strong signal on its own to my outbuilding 100 feet away. Can I set up one of these as a receiver of that signal, then connect it to my belkin N750 next to it to give a strong signal throughout my garage? Or will this give a strong signal. It seems to be directional and designed to point at the source, rather than where you want it to send a signal.
Greetings friend, I have a CPE 220, it will be that you know how to configure the adjustable transmission power since I have one and it does not exceed 8 DBM and the specifications say that they reach up to 30 DBm
Thanks for the informative video. Do you keep the ethernet cable from the PoE box of this device attached to you pc at all time for this device to work?
No need to connect PC. in fact if you want to use internet in PC or NVR, DVR , network printer you can connect repeater Ethernet port to get internet for non-wireless device.
Does this connect to ANY access point (2.4GHz) or only other C200/CPE210 model? I want to extend the wifi in my house (Wifi from Modem 2.4GHz+5GHz) to the barn. Do I need TWO C200 or can I use one C200 and my current wifi (Dlink)?
can connect with any 2.4GHz device - also see user manual here for repeater connection with the non-cpe210 device techtrickszone.com/2018/06/29/tp-link-cpe210-2-4ghz-outdoor-device-repeater-mode-configuration/
@@TechTricksZone i have eap110 i use one ssid for captive portal, can i use this cpe220 to repeat the eap110 captive portal to make a better coverage of myhotspot?
For some reason when i try to configurate the CPE210 on Chrome i cant see the language selection or anything, i just see password and username where i type on both admin but it says wrong password or username.Can u help me?
@@TechTricksZone when u say reset the device ,what do u mean ? Is it about the device or about my computer that doesnt show the language selection or agreement ?
i means factory reset device with reset button given in PoE adapter or device also. please go to techtrickszone.com and seach cpe210 and follow the steps to access you device step to step
I want to connect the Internet Router via LAN cable to the tp-link so as to extend the range of my Wi-Fi line without creating another access device with SSID and Password. Bring only the internet "extend the Wi-Fi range understood? But using the ethernet cable!
You mean you want to connect A lan cable from main internet router to your TPlink device ? and want to extend range with same SSID and password using in your main internet router?
Than just follow this tutorial for configuraiton -techtrickszone.com/2018/02/03/tp-link-cpe220access-point-configuration Note- use the same SSID and password using in main internet wifi router. connect lan cable and enjoy internet
