TP-LINK OMADA - Comprehensive Setup Guide (2023) HOME NETWORKING

Подписаться 53 тыс.

Просмотров 81 тыс.

50% 1

This is the complete TP-Link Omada setup guide for Home Networks or small businesses. TP-Link sent us these 4 products for testing and review.
A hot cup of coffee is a Fantastic Way to Help Support our Channel!☕www.buymeacoffee.com/ultimate...
Or You Can support us on Patreon for $2 a month! 🙂 Thank you!
/ ultimatetechhub
Business Inquiries: Ultimatetechhub.lv@gmail.com
TP-Link Omada Products:
TP-Link Omada Hardware Controller (OC200) amzn.to/3TNOA15
TP-Link ER605 | Multi-WAN Wired VPN Router (ER605) amzn.to/3ElWPvV
TP-Link TL-SG2210MP | Jetstream 10 Port Gigabit Smart Managed PoE amzn.to/3V9ZRKp
TP-Link EAP670 | Omada WiFi 6 AX5400 Wireless 2.5G amzn.to/3AoLgCH
Klein Tools VDV501-851 Cable Tester Kit Scout Pro 3 for Ethernet Data amzn.to/3TEl13L
Klein Tools VDV501-852 Cable Tester Remote, VDV Scout Pro 3 Test Kit amzn.to/40AXQd1
Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (4GB) amzn.to/3lHwwe9
Fantastic Deals On Cat6 & Cat5e Ethernet Cables:
trueCABLE Cat6 Riser (CMR), 1000ft, Green, 23AWG amzn.to/3Jqm4yj
VIVO Blue 500ft Bulk Cat6 amzn.to/3KQwK9D
SolidLink - SL600 CAT5e 1000ft Premium amzn.to/3tsE1Hb
Cat5e Bulk Cable 500ft Pure Copper amzn.to/3KTyRK8
Best Deals On Layer 2 Managed PoE Switches:
EnGenius Cloud ECS1008P 8-Port Gigabit PoE Switch amzn.to/3CFXJlv
EnGenius 24 Gigabit Layer 2 Managed Switch amzn.to/3KK36Db
Best Deals On Wireless Routers:
NETGEAR Nighthawk Pro Gaming XR500 Wi-Fi Router amzn.to/3i7Cv6J
TP-Link AC5400 Tri Band WiFi Gaming Router amzn.to/36i0InW
Best Deals On Mesh Wi-Fi Networks:
NETGEAR Orbi Whole Home Tri-band Mesh WiFi 6 System (RBK752) amzn.to/3MM2yhT
NETGEAR Orbi Whole Home Tri-band Mesh WiFi 6 System (RBK852) amzn.to/3JaBHtG
Best Deals On Wireless Access Points:
NETGEAR Wireless Access Point (WAX610PA) amzn.to/3t7f7MU
NETGEAR Wireless Access Point (WAX630) - WiFi 6 Tri-Band AX6000 amzn.to/3KIWrZF
All Products in our Smart Home Network Tour:
Linksys Max-Stream AC2600 MU-MIMO amzn.to/3KXj2Cf
Ring PoE Adapter amzn.to/37rK7yS
Ring Video Doorbell Elite amzn.to/3i0tLiK
TP-Link 8 Port Gigabit amzn.to/3JbOJad
Ruckus Brocade ICX 7150 amzn.to/3CCRDT5
Ruckus Zoneflex R610 Wave 2 amzn.to/3tZBl1a
Reolink PoE IP Camera (Pack of 2) amzn.to/3t9GaHz
Reolink 4K PoE NVR 8 Channel amzn.to/3KH5KJS
Samsung ET-WV525BWEGUS SmartThings amzn.to/3CGQg5z
HDMI Extender 1080p@60Hz amzn.to/3w8HBrH
Echo Show 8 -- HD smart amzn.to/35UPFkP
Ecobee Smart Thermostat amzn.to/3i23WPd
My Gear:
Sony A7iii and Accessory Bundle amzn.to/3q1IGgY
GoPro HERO11 Black amzn.to/3TIRxBK
DJI Mini 3 Pr0 4K Drone with RC Smart Remote Controller + Fly More Kit amzn.to/3FTJlJb
Samsung Galaxy S10, 128GB amzn.to/35Sg3vO
Canon EOS R6 Full-Frame Mirrorless Camera with 4K Video amzn.to/3CSEc1z
Elgato Ring Light - Premium 2500 lumens amzn.to/3JaCfQg
Blue Yeti X USB Microphone amzn.to/3J38K2J
| Great Deals the Ultimate Tech Hub Recommends! |
www.amazon.com/shop/ultimatet...
Ultimate Tech Hub Merchandise:
Shop Our New UTHmerch store! shop.spreadshirt.com/uthmerch/
As an Amazon Associate I earn from qualified purchases.
If you want the Ultimate Tech Hub to promote your product(s) or service(s)
or you want to send us something for review or testing please email us below
to request a media kit.
Ultimatetechhub.lv@gmail.com
Music Provided By: www.epidemicsound.com
ultimatetechhub.com/
00:00 Introduction
00:29 Network Devices
00:43 Connecting The Devices
01:02 Omada App Setup
01:37 Omada Cloud Access
02:04 Omada Dashboard
02:45 Wired Network Options
02:55 Changing Controllers Gateway IP Address
04:01 CloudFlare DNS
04:22 Assigning Static IP Address
04:47 Creating VLANs
07:54 Creating New Wireless Networks
09:32 Create Access Control List - ACL
10:18 More Omada Menus & Features
10:34 Firmware Update
10:57 Final Thoughts & Thank you for watching

Наука

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 112

@TheNok610 Год назад

I work from home, so I needed a more robust, secure system.I recently swapped out my build from Nest WiFi to TP Link Omada to achieve that goal and so far I have no regrets. Creating vlans for my work equipment, IoT devices and the kids devices is a blessing in disguise. Being able to set bandwidth limits, as opposed to timed priority on Nest WiFi, is great considering I have multiple gamers with one who likes to stream live while I'm working. No I can allocate the bandwidth to my work equipment, the real money maker...lol.

@UltimateTechHub Год назад

The rate limit is an awesome feature for sure! Also, isolating all or parts of your Network from guests is a great way to secure your Network, especially since you work from home. I have a teenager who plays fornite and call of duty online and tends to suck up all my bandwidth but with limiting his bandwidth I'm all good! Thank you for watching Brian have a great day! 😃

@gregorycollas9058 7 месяцев назад

Thanks !!

@uglybob7505 Год назад

I have a TP Link Mesh network at the moment, rate their products and the coverage from their 3 node mesh network is amazing !!!! Unless something better comes along I'll be sticking with TP Link for me network stuff :-) The Mesh app is great too, just been updated and its so easy to manage my network. Mike, thanks for taking the time to do a detailed video on this, appreciated as always.

@UltimateTechHub Год назад

TP-Link makes fantastic Mesh equipment and yes they are amazing especially for the price. I've been using tp-link for years so when they contacted me for a review I was like "Heck Yes!" 😁! Once again Bob thank you so much for watching! Hope you have a great Christmas! Cheers from Mike from good ole Las Vegas! 😃

@thuggy67 20 дней назад

@@UltimateTechHub One stupid question , the controller is good use if this place is 10 miles away from you right? meaning you can troubleshoot and login remotely right?

@ianjoyce890 7 месяцев назад

Thanks for this setup video, it was super helpful! Is it better to use fixed IP's that are outside the DHCP pool or static IP's on the devices themselves?

@DrGreenthumbNL Год назад

Thank you for this intresting video. Got the complete set-up like this in our restaurant. Only with a TL-SG1016PF switch. Question about that, the switch doesn't show in the controller, it says 0 switches. But everything seems to be working fine but just can't see/control it. Any thoughts? Other question, the modem/router provided by the internet provider, do I turn it's firewall off? So it can't give interference with the settings of the Omada router. Thanks in advance, keep up the good work!

@z8ty 11 месяцев назад

This is a really great video.Thank you for making it. However, it would be nice to explain why you choose a particular setting. Such as checking off all the wan/lan interfaces. Please explain why you would check on that you are not using.

@UltimateTechHub Год назад

New TP- Link Switch video just posted here is the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ae37i61m8BI.html All products in this video are linked in the description. If you have any questions feel free to ask. Look for more Tp-Link Omada videos in the coming months! Thank you for watching and for subscribing! 😀

@michaelgordon1968 Год назад

Why the 670 over the 650? 3200 sq ft two story home was considering the 650. Or would you recommend the 610?

@jlruss9777 Год назад

6 months later….what happened to the series?

@UltimateTechHub Год назад

@@jlruss9777 It's coming in a few weeks. We've been busy with other company reviews. Thank you for watching!

@DaKabayanTek 2 месяца назад

Hi, sorry I maybe late to the ball game with OMADA. My provider modem router combo is actiontec T3200m. Correct me if I am wrong, will I set the T3200m to port bridging? Then connect the port1 of the t3200m to the WAN port of the OMADA er605? Thanks for the help in advance....

@JharylDonnNan 7 месяцев назад

Hi, thank you 4 the video, i have a question: I am planing a network with the same hardware but i need 2fa for vpn. Any way to implement this?

@lowvoltpro1078 7 месяцев назад

Great video! I’ve been installing this system for a while now. I’ve noticed as of the last few installs I’ve had deploying this gear, during the setup process on the app, it’s says “cannot add controller” or “this device doesn’t exist” very strange. I’ve had to get on the phone with TPlink tech support. I’m wondering if anyone else has seen this issue as well.

@annehipolito7305 10 месяцев назад

Do you still recommend a setup like this if i were to use it in my office. We have 3 floors with 100 users per floor.

@ral2793 9 месяцев назад

how do you configure hotspot wireless w/ limited access to main network?

@victordeleonjr5386 Год назад

Great Video! Question regarding the ACL - Can i communicate with the IoT Devices via an IoT app, such as Sonos if I am connected to the Main Wireless Network or do I need to switch over to the IoT network? Thanks

@UltimateTechHub Год назад

You can connect using the IoT app like Sonos when connected to the main Wireless Network. Thank you for watching.

@todthames4174 Год назад

Great video. Couple of questions. Do you use static IPs for router and switch? Also, if I’m moving in 4-5 months, do you know how difficult it would be to relocate all equipment maintaining all settings?

@UltimateTechHub Год назад

You can use static IP for the switch if you want. The router doesn't need the static IP assignment. As far as moving it's as easy as unplugging everything and plugging it back in at the new location. Settings are all saved. Thank you for watching!

@mr_fuji_mintsmr_fuji_mints9873 Год назад

I just got one of these and Im having a hard time port forwarding my PS 5 for remote play. Im not seeing a spot for TCP or UDP anywhere. Can you help me please?

@dimey3572 Год назад

Would it be possible to ise the er605 as a ethernet router with the first wan port connected to a cellular modem/router

@JoseCastillo-sk8gm Год назад

Thank you for the video. I currently set up my home network and have a question. There are 2 desktop pc's and I would to know if you connect those directly to one of the Lan ports of the router, or to patch panel? Thank you

@UltimateTechHub Год назад

Yes you can connect both to the router or patch panel. Thank you for watching and if you subscribed thank you as well.

@fezzle81 Год назад

Thanks for this video, i'm curious to know if I were to start with a Omada ER605 router and attach my existing g Deco AP's, would that work as a mesh? I just can't afford to get all the POE swtiches, AP's and Cloud controller yet. But want to build out in the future.

@UltimateTechHub Год назад

That should work. Thank you for watching!

@mrfixitpa 4 месяца назад

I wondered the same thing myself because I also have the Deco Wifi 6 and in the process of switching to Omada. From what I understand the two systems are not compatible and will not work. I also believe that you can put those in stand alone mode and it will broadcast wifi from your wifi router.

@todthames4174 Год назад

Second question from this great video. I’m in apartment now so can’t install a WAP. What do you think about buying them controller, router, and switch initially and use my google wifi router as in bridge mode for wifi. Use this setup until May when I move into my new house where I’ll install the WAP. Just wanted to get your opinion.

@UltimateTechHub Год назад

You can still use the WAP and just run an ethernet cable from the switch to the WAP and leave it on shelf or table. I would use only Omada hardware to keep everything simple and easy to monitor. You could even mount the WAP to the wall and run the cable from the bottom of the wall to the spot where the WAP is located.

@z8ty 11 месяцев назад

Help me understand your ACL. You stated verbally that "We want to block all networks from accessing IoT devices" - didn't you mean that you want to keep IoT devices from accessing the networks. i.e. - bad player gets access to my thermostat, however, he is stuck because the ACL says no IoT traffic on other VLANs. However, when I need to get to my thermostat I do not have to join the IoT network. It appears the ACL you created does exactly that. So would you need a ACL for each VLAN to stop traffic or could you select more destinations? I am not being critical here, just want to make sure I understand. Thanks again...

@FLORENCIOLITUB-nv2mj 3 месяца назад

hi, do you have tutorial how to setup those hardwares? please i need thank you

@elloisajoyquejada8945 2 месяца назад

do you have for business like wifi voucher type?

@Espiritiv Год назад

How loud is that POE Switch. I have read some reveiws that a fanless is the way to go for home use? That leaves 63W max units i think for POE routers

@UltimateTechHub Год назад

Not loud at all. Maybe a hum. It's barely noticeable. Thank you for watching.

@garymedeiros7126 Год назад

Does your ISP router have to be in bridge mode before you start configuring the omada setup ?? Can you do it without being in bridge mode. I have been trying to adopt the er605 router using the controller no poe switch just the router conneted to the omada controller. I edit the lan to 192.168.10.1/24 but the er605 will try to adopt but wont ?? Any suggestions ??

@maximegatien5986 Год назад

I'm interested in the answer. I've the same problem. I don't have bridge mode in my ISP router

@Mantis_Toboggan Год назад

I just upgraded to 2gig fiber from frontier. The router they gave use is a eero pro 6e. The problem is it only has 1 2.5g port and that is required for the ont connection. My question is could I put my eero into access point only mode and then use this tplink router in place of it?

@UltimateTechHub Год назад

Yes that would work. Plug the ethernet cable from the LAN port on the eero into the LAN port on the VPN router. Setup the eero as an access point. Turn off DHCP on your eero. This should work perfectly.

@Mantis_Toboggan Год назад

@Ultimate Tech Hub thanks man I was worried I order the wrong thing but I guess I didn't!

@UltimateTechHub Год назад

@@Mantis_Toboggan You are all good. The TP-Link VPN router is fantastic and a great price. Keep me posted if you have any further questions. Happy New Year as well!

@Le-Naka Год назад

Hi, I already have a managed switch (TPLINK TL SG 3424p). Will it cover the functions of the controller?

@UltimateTechHub Год назад

Yes just use the cloud software. Thank you for watching!

@Missing0o0 11 месяцев назад

Hi, how did you set your security cameras under the POE LAN that you made?

@UltimateTechHub 11 месяцев назад

Just add the Reolink camera using the app.

@R3nz_ Год назад

Can I use any poe access points with this system? I'm not trying to spend like 150 bucks per access point but still want good wifi around my property. Thoughts?

@UltimateTechHub Год назад

Yes

@highmountainpropertymangem2517 Месяц назад

Whenever we change the controller gateway IP it goes offline and will never let us get connected without a full factory reset.

@NBH2023 6 месяцев назад

can i set up without the jetstream switch? will it work with Router and OC200? with 3 AP?

@UltimateTechHub 6 месяцев назад

Yes but your limited to the routers LAN ports and fewer LAN configurations.

@walberg61 2 месяца назад

hmm. you make vlans, but when you have by example 2 networks. 192.168.10.1/24 and 192.168.20.1/24 when you are on a computer with 192.168.10.40 you can not access a device that is on 192.168.20.45 you can only access devices on your own network, or am i wrong?

@bradjohnson7199 Год назад

Have you used the Heat Map feature in the controller yet? What do you think, any tutorials?

@UltimateTechHub Год назад

I have not used that feature yet but I will do a tutorial video on it soon! Thank you for watching!

@mazencapo 11 месяцев назад

Can we have a video how to set up more than 1 access points on different networks?

@solomonhilliard5357 11 месяцев назад

Great video 😊 Is the dashboard locked to the controller? What if I just had the AP connected to a non tp link switch?

@solomonhilliard5357 11 месяцев назад

After researching: the controller is also software that can be installed on a Proxmox LXC or bare metal

@UltimateTechHub 11 месяцев назад

You can just use the Omada dashboard for the AP. Just download the Omada software controller and add the AP. This video shows how to download and setup the software controller. This video is for the tp-link switch but works for the AP as well. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ae37i61m8BI.html Good luck and keep me posted.

@solomonhilliard5357 11 месяцев назад

Thanks! I will, I'm waiting on the wifi 7 APs to be released. The wifi 7 mesh routers are in stores so hopefully it won't be too long.

@mark12.31 Год назад

Curious why you changed the controller IP to .100.1 from the default 0.1. Is that simply because you don't want it to be common (since many are 0 or 1) or is there a networking reason? I consider myself pretty good at networking but I have never had a class and consider myself pretty novice so...if this is a newbie question then I fully accept that I may look silly here. 😁

@UltimateTechHub Год назад

I used 192.168.100.1 because my main network is 192.168.1.1. And I also wanted to show a different networking IP address. Good question and thank you for watching I really appreciate it.

@mark12.31 Год назад

@@UltimateTechHub Oh, OK. Thanks for replying. Makes sense. My current is 1.1 so I will probably stick with the default 0.1 and go from there. Thanks again!

@hmt8701 Год назад

Have you thought about reviewing their new ER7212PC all in one model?

@UltimateTechHub Год назад

Absolutely!

@jonny4509torres Год назад

Are you restricted to certain kinds of cameras for the setup with this switch? Or can you use any POE cameras? And how do you view them? On the Omada app/website?

@UltimateTechHub Год назад

You would view them with the Camera App. It depends on the brand of camera but most cameras will work with any managed switch.

@jonny4509torres Год назад

@@UltimateTechHub Camera app as in separate NVR? Or via TP Link? I’m trying to understand all this next level networking stuff 😅

@UltimateTechHub Год назад

@@jonny4509torres VIA the Camera Brand App. Feel free to ask as many questions as you want. Also I have over 100 networking videos.

@BrentLeVasseur 5 месяцев назад

Thank you for such a clear, concise and easy to follow tutorial. ❤❤

@UltimateTechHub 5 месяцев назад

Glad it was helpful!

@BrentLeVasseur 5 месяцев назад

@@UltimateTechHubHow do you assign switch ports and or specific devices/computers on the network to a specific VLAN, so that they are tagged? And then how do you setup rules so that certain VlAN networks can talk to others while others can not? Maybe do a deep dive video on that. Thanks!

@steve-oh Год назад

Great video! Question about the Omada controller/cloud. I want to avoid subscriptions, but still would like to have remote access to the network admin. As I understand it, you can pay $10/yr/device for their cloud service for remote management? Is there any way to avoid this and set something up via a VPN instead, and use that to access the network and thereby the admin portal, perhaps? Doesn't the Omada controller have some sort of VPN functionality built in?

@z8ty 11 месяцев назад

Use a OC200 or OC300 hardware controller. No fees. Cloud access is included. No user data is ever allowed to the cloud app. You could also do a VPN.

@user-zd3fy4lf8z Год назад

Trying to set up a complete Omada system with 14 outdoor AP's (158 acre Trailer Park). I would like to issue separate passwords that expire for each site. (Like a hotel does). Is this possible? Tks for any help you can share.

@UltimateTechHub Год назад

No, you will need some software for that operation. Do an internet search for hotel wireless network management. You can add that software to your network.

@mategombas771 4 месяца назад

Omada does this. Look at hotspot manager function. You can made vouchers which expire. As you can deploy 8 ssid per AP, youl will need a couple of them. I would go one on one ssid per plot. I see 14 AP planned times 8 equals 112 possible different ssids. But more plot could eventually use the same ssid as well. Deploy hotspot manager within omada controller. It will do the job.

@Mr.C0ffee Месяц назад

Do you really need all the switches? Can’t you use the access point by itself?

@UltimateTechHub Месяц назад

Yes you could. I have a bunch of wired clients so the switch is needed for my home. Thank you for watching!

@Missing0o0 11 месяцев назад

Do you have a guide on enabling IPv6 on this setup?

@UltimateTechHub 11 месяцев назад

No but it's an easy process. I will make a video about that soon. I recently did a video on the Switch so make sure to check it out.

@Missing0o0 11 месяцев назад

@@UltimateTechHub Thank you so much. I followed your guide to set up my network, it was a life saver. I have devices that recommend using IPv6, so wondered how to set it up since I heard it uses both numbers and letters and different punctuation. 🤔

@lutgardis613 Год назад

can I use pfsense with omada switch, ap and controller? thanks

@UltimateTechHub Год назад

I believe can use any router so pfense should work. Keep me posted if it doesn't work.

@daltonschrader8328 6 месяцев назад

Yes that’s what I have setup.

@tatebrooks5797 10 месяцев назад

Do you need licenses for Omada?

@sale666 Год назад

Why did you set the DHCP range to start from .2 not .1?

@UltimateTechHub Год назад

I leave the first IP address for a static IP address. Usually my main PC.

@akkressor 9 месяцев назад

What is that with cloudfare? do you have to pay for that or can I just copy paste from your "tutorial" and it'll work? ... running a business where 30 pple require internet. :)

@akkressor 9 месяцев назад

yiss, i've been like #500 .. woohow

@UltimateTechHub 9 месяцев назад

CloudFlare is completely free. Just follow my tutorial. Thanks for watching!

@muhammadadilnaeem1333 Год назад

cloud pr login nhi horaha

@xheyderek3356 Год назад

I am just a home user that wants to avoid the hassle of consumer-grade wifi routers and mainly only need a wired network. So far all these tutorial guides make use of hardware/software controllers. Can't I just use the router itself with no controller? Then add a switch for more connectivity and an old wifi router as an AP if I need to? Thanks to anyone with an answer.

@UltimateTechHub Год назад

Yes no controller is needed. Just use the Omada cloud software to access the VPN router and switch. You can add as many APs as you want. Thank you for watching and if you subscribed thank you as well. 😀

@xheyderek3356 Год назад

@@UltimateTechHub Great. Thanks for the quick reply and great channel!

@orestesdd 28 дней назад

I don't like the size of the APs, for I'd like more like a mesh network instead of APs!

@UltimateTechHub 28 дней назад

Yes the APs are pretty large. I prefer smaller units as well. They almost seem like they are designed for professional offices.

@orestesdd 26 дней назад

@@UltimateTechHub Me, only interested in a small home network as I've been retired since 2013.

@Starcom70 3 месяца назад

It's a good video to start things out but where's all the network configuration stuff to create a functional network like with DNS, NTP and a way for people to log in to your WiFi network without having to share the wireless password? How about if you have a guest in your network and you are on the other VLAN how do you AirDrop or share things across apple devices? I think there's a lot more that needs to be covered and I have yet to find a truly comprehensive guide on how to actually properly set up a home network. If someone knows a a complete guide no matter if its video or written please let me know. I also want to know what should I call my network as far as a domain name goes as I find a lot of things that say you should not use the word .local because that is used by mDNS I don't know it is confusing.

@Surtistuff Месяц назад

Airdrop works without WiFi

@vilifyahuman Год назад

I have one tp link eap 650. All I want to use it for is to take my wifi from my Verizon FiOS router from one side of my house to the other side. tp eap650 is linked via Ethernet cable to my modem/router, it's a combo unit. How can I make my tp link have the same SSID as my current wifi. Sorry very tech stupid hear, just trying my best.

@dalesupertramp9234 7 месяцев назад

@vilifyahuman Did you figure this out? I’d like to use one on my home WiFi as well, but not sure how to configure it since it appears to need special configuration.

@linuxpc4me555 Год назад

Would like to see a tp-link camera review vs unifi protect

@jimmyTimtam 7 месяцев назад

rebadged ubiquiti.

@LynnellEmmanuelNeri 11 дней назад

I cannot click the first video thumbnail

@UltimateTechHub 11 дней назад

Which video thumbnail?

@bradsmith2217 Год назад

Terrible support and warranty Worked for 3 months

@jorgemtds 7 месяцев назад

If I need a smartphone to configure everything... I will never get one of these...

@mcplar1971 6 месяцев назад

You don’t

@ghostsintheforum Год назад

Are these “controllers” really necessary? Seems like a gimmick device that has features that should be right in the router anyway?

@UltimateTechHub Год назад

The controller isn't really necessary. You don't need it to manage the network.

@ghostsintheforum Год назад

@@UltimateTechHub wow thanks for the fast response! the reason i asked is because i just installled an access point using ethernet to an outbuilding on my property. my “ap” is actually an outdated asus router that isn’t even compatible with ai mesh. all i did was give it the same ssid and pw as the main router and i noticed that as i roam around the property, my devices seem to just automatically switch between my router and ap depending on which one i’m getting the strongest signal from. i thought maybe the controller had something to do with seamless roaming.