how to configure the NTC temperature detection www.best-microcontroller-proj... music Modern Situations - Unicorn Heads donate toss.me/wb1016 github.com/sponsors/wb1016
Found 20 on sale/special discount. It was nice to hear this info to investigate what I got. My current charging systems are "all over the place" and I wanted to organise this and learn some more.
Thanks for the great info! I found 10 of these for 8 bucks and your video helped me figure out I had the last version you mentioned. Seem to be working OK so far trying to recover some over discharged cells.
Thanks, I appreciate your taking the time to describe the differences in these very similar modules. I have yet another variant which is similar to your latter examples, is USB-C and "4056" on pcb front and no markings on the rear, but the chip markings are a little different with (no branding) 4056H, 8205LA, and DW01-A
Thank you for the information on the temperature protection. This board is good, but was missing detecting when the battery was overheating. We’ll done.
I have 2 Samsung 2500 mAh cells connected in parallel Total capacity is 5000mAh Can i use single TP4056 module to charge it or should i charge them separately by TP4056
@@kennnnnethchua it is safe. problem is that the TP4056 is linear charger. meaning it just dissipates exeeding voltage into heat. it makes TP4056 chip hot whie charging large battery. you can use IP2312 instead.
The only good information is about turning on temperature protection and it only says so at the end and doesn't explain anything about that, make another video explaining this feature plz
Disagree completely, it is very useful to distinguish the variants of this board because often the seller does not provide the intricate details. On the other hand, it was pointed out to consult the datasheet for temperature implementation which is correct. We can't very well hold your hand and wait for you to supply specifics of your design requirements and then calculate that out for you. If it is beyond your understanding to use a datasheet to work out the component values and topology, then you should leave it alone as it is beyond your skill level, and frankly, probably dangerous for you (or others in your absence) to be messing with DIY charge and discharge of Li-Ion batteries at all.
Yyeeaahhhhh... except he DID in fact explain how to disable the temp function and how to configure it if needed. Not only that, he goes on to explain where you can get more detailed info for this feature. It seems strange that even with the ability to rewind as many times as is necessary, you still somehow missed this info. 🤔🤔🤔
