Traffic Sign Recognition - Enabling on VW MQB Group Cars like Skoda, Audi, Seat (VCDS / OBDEleven)

Подписаться 6 тыс.

Просмотров 51 тыс.

50% 1

Steps used to enable Traffic sign recognition. You will need OBDEleven or VCDS to make the changes.
Get the original OBDEleven from here: s.click.aliexpress.com/e/_AnvdXK
NextGen OBDEleven (Future support for BMW as well) here: s.click.aliexpress.com/e/_AnvdXK
You will need an A5 camera fitted already used for e.g. lane assist.
Controller 5F (Multimedia)
--Adaptations--Car_Function_List_BAP_Gen2
traffic_sign_recognition_0x21
Change to to activated.
--Car_Function_Adaptations_Gen2
menu_display_road_sign_identification
Change to activated.
--Long Coding--Byte 24, Bit 6
Traffic Sign Display (VZA)
Change to not active
Controller A5 (Driver Assistance)
--Long Coding--Byte 16, Bit 04
“Traffic sign recognition VZE"
Change to Active
Controller 17 (Dashboard)
--Long Coding--Byte 5, Bit 2 Enable
“Traffic Sign Recognition installed".
Change to Activated

Хобби

Опубликовано:

30 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 338

@Lunga168 Год назад

Works great - I enabled traffic sign recognition in my 2018 Audi RS3. Thanks!

@kosio777 2 месяца назад

Great video! Just done the same on Audi Q3 with VCDS, exactly the same steps worked like a charm!

@user-iy8ox9yb8v 6 месяцев назад

Hello, great video! I just finished the coding on a Canadian market 2017 Mk.7 Golf Alltrack. The coding went well, with no glitches. I can see the Dynamic Road Sign Recognition option in the central console in the Car-> Assistance systems menu. I can also see that the compass has moved from top centre of the dashboard to the bottom left and that the temperature display moved from bottom centre to bottom right of the dashboard. However, when I scroll through the Driving Data screen on the dashboard, when I reach the Road Signs sub-menu, I have a message that reads "No road signs available". Hence, when I drive, no road signs pop up on the dashboard. I suppose I do not have the right camera? Thanks again.

@jasonhulley3914 6 месяцев назад

Hi there great video, I just wanted to ask if this would work on an Audi Q3 2019. The car already has lane assist, Sat Nav and traffic recognition camera built in. The virtual cockpit has the option for traffic sign recognition but currently states not available when I switch to it. Thanks in advance for any assistance.

@vitorinosimoes1809 2 месяца назад

Olá. Tentei ativar os sinais de transito e só diz sem sinais disponível. queria que me ajudasse. fiz a configuração e devo ter desativado alguma coisa ou bits. na tela do onde diz assistente de eficiência agora está em cinzento e quando carrego nessa opção diz que neste momento não está disponível. Obrigado CUMPRIMENTOS.

@Perriwag 4 месяца назад

Great video, Everything works fine exept i don't get the driver assist meny options. Do you know what might be wrong?

@maciekzinho 9 месяцев назад

great video, are the steps the same for the 2018 Skoda Superb w/ Columbus? many thanks

@MarioCedenoGonzalez 10 дней назад

Would this work on 2020 Audi Q3 S line premium plus, I currently have traffic lights recognition, thanks

@Jackster292 Год назад

Hello, great video and thank you so much for the detailed explanation. I just want to know if I will be needing to reset to the old settings if I'm taking my car to the dealership?

@laymandiy Год назад

I would say if it's a leased car then some eagle eyed ones may have an issue and say you modified the car. Never heard of an issue like that though.

@luanshkololli4511 Год назад

Hi there i have the problem On my road sign on passat B8

@christianbettoni81 9 месяцев назад

In A5 I don't have it. I've working Lane Assist with 5Q camera.

@fsiebrand 3 месяца назад

Great video, Unfortunately it doesn’t work on my 23 Skoda scala style. 😢

@bangyangqiu54 2 года назад

Hi! Thank you so much for the video! I have a 2019 A4 B9 and I was wondering if I could follow every step on this video. I don’t think my camera is parameterized

@laymandiy 2 года назад

If you have the kit, follow the instructions. If your camera requires parameterization, it just won't work. Revert to original

@izeteyub1907 Месяц назад

Hi, which obdeleven do I need to have to do this?

@kell7536 День назад

which OBD11 do I need for this on my 2020 Q3?

@bola-ramy 2 месяца назад

I dont have the unit 5A driver assit audi s3 2017 premium plus

@FerasArabiat Год назад

Thanks for the video, any idea how to do this (specifically last step) on MEB platform ? In my case the car recognizes the signs and shows a message saying I exceeded speed limit for example however the sign itself is not shown on the dash or HUD.

@laymandiy Год назад

I'm sure it sure but it would be a trial and error with the bits.

@raicagheorghe1351 Месяц назад

I can't find A5 driver assistance. 2017 Audi A6

@nacibbelhadjoudja5411 5 месяцев назад

Hi how to swap from eu sign to us sign Thx

@EJHowTo Год назад

Thanks for the great video. Got most of the way there but I am using VCDS and cannot see the first option traffic_sign_recognitiom in the adaptations menu. The next one shows and i can change this, i am thinking it might be called something different? Many thanks

@laymandiy Год назад

Do you have the correct camera?

@sh00t1ngst4r12 4 дня назад

Worked for me on my RS3 qas well! Thank you! I do however get a popup saying traffic sign restricted, consult manual. Any ideas if this is normal?

@laymandiy 4 дня назад

Multiple things, e.g. it doesn't have data for your country. Sometimes it's just you need to take it for a drive

@alliemonster8149 10 месяцев назад

Hello, can get this to work on 2023 tiguan R in Australia, all steps fine but do the last step which is changing the camera mode from fuision to detection, any ideas?

@laymandiy 10 месяцев назад

Not possible on the letter models with just obd11

@Agur.A 2 года назад

I have 2014 version (TSR factory activated) and since it reads my Country, that does not have map traffic signs loaded, it does not work. I have it set as activated, but "not available in your location" error message on the dash. disabled VZA, but still nothing.

@laymandiy 2 года назад

Unfortunately, tsr data needs to be loaded into the camera. For many countries this wasn't done. Unfortunately, you will not be able to get this functionality. However, if you drive through a country where it exists it will turn on

@Adrian-hn8mj 2 года назад

Hi, thanks for posting this video. In my case I noticed that is not reading traffic signs but is showing them from navigation. Any idea how to fix this? Thanks.

@laymandiy 2 года назад

Yes the last option of VZE / VZA I explain in the video which option to select. Ideally you want a hybrid where it shows maps signs and then it overwrites it with what it's picked up from the camera

@AntonioStornello 2 года назад

Hello. I have a brand new Audi Q2 MY2022. The steps are the same? I have the matrix led, so there is a camera on my car front-glass

@laymandiy 2 года назад

Yes, with the addition of parametrisation which will need to be done with dealer software or vcp. It's not easy..

@GennaroCarlomagnojoker Год назад

Hello, very well done video, congratulations! I have a 2021 Kamiq with the 2Q camera serial. Is it possible not to be able to activate? Thank you.

@laymandiy Год назад

I don't think it's possible at the moment without parameterization if camera which involves connection to the VW servers

@olteanalin5040 10 месяцев назад

Hi, if i have ACC and lane assist on my 2017 Tiguan and head-up-display and i don’t find how to activate trafic sign recognition in my settings, it’s possible to activate in my car with VCDS?

@laymandiy 10 месяцев назад

Yes

@birnojasmin 10 месяцев назад

I owns a Škoda Octavia model 2023, but when I tried to turn it on Traffic Sign Recognition via OBD11 like on video. I could not turn on the TSR because via video instructions I can not find on my car via OBD11. Do you have experience with the new Skoda Octavia model 2023 and is it possible to post a video on how to turn on the TSR via OBD11. Thanks in advance

@laymandiy 10 месяцев назад

Not possible on the latest models with just obd11. Need VW servers for paramaterization as well

@user-bt3sm3df2z 4 месяца назад

Which a type of vcds i must have? Can you give me more detailed instructions in the comments? I have a golf 7 and i have camera for recognation traffic sign, but my car show notification "no data available for the area" I live in Bosnia , and when i in Germany traffic sign working Thank you

@laymandiy 4 месяца назад

You need at least vcds hex-v2. Some countries don't have tsr. If it works in Germany there is nothing wrong with the setup. Maybe try trying the vze option in long coding (see video)

@michaaugustyniak6595 5 месяцев назад

Hi I was wondering if you could help me. So firstly I've done it by one click app. Then I followed you long coding. I have activated TSR but it doesn't works with my map. My map only displaying speed limits from signs, which I hoped will work together. Any idea how to get fix it? Thx

@laymandiy 4 месяца назад

You want map speeds or real life speeds picked up by the camera?

@rogerandersson1292 Год назад

Hej tack för en bra video Dock är min engelska dålig och videon går snabbt men tror du detta handhavande fungerar på min Audi A3 8y 2021 För att aktivera denna funktion Hur vet jag om jag har rätt kamera som stödjer funktionen jag har A5 Camera mfk3.0

@laymandiy Год назад

You will most likely need to parameterization of the camera. If you have lane keep assist, you have the right camera.

@kamelps5780 2 года назад

Do you can activate lane assist when you have acc ? I have a Skoda kodiaq sportline (front assist and acc )

@laymandiy 2 года назад

No, acc and front assist use only the radar. Generally sportline doesnt come with upgraded cameras.

@colinatherton3002 3 месяца назад

hi layman could i get this to work on a 2020 seat arona xcellence lux

@laymandiy 3 месяца назад

Borderline, not sure. Some 2020 models+ require parametrisation

@eg8828 10 месяцев назад

(2022 atlas premium /R line) same instructions? Also can I change my dash colors/configuration?

@laymandiy 10 месяцев назад

Unfortunately you need more tools on the newer models. But you can change mood lighting in the car. Not sure about the dash colours

@Mr_Black_R 2 года назад

Hi great video are theses the correct steps for a VW golf r 2018 mk7.5 thanks

@laymandiy 2 года назад

Should be. However it appears is a mixed bag depending on the camera you have. I'm sure it's fine for 18my

@MushypeasDMc Год назад

Hi great vid I have a Audi A4 B9 2016 if I do this will it show up on my normal screen on dash the one the shows you digital speed

@laymandiy Год назад

Yes should do.

@paclaf 7 месяцев назад

Awesome video thanks. Do you think this will work on a 2023 Audi Q5?

@laymandiy 7 месяцев назад

Sorry, no chance. Need additional equipment

@usmansajid1118 Год назад

Hi Layman, will this step work for a 2016 Audi Q7 4M? i have the OBD 11 already

@laymandiy Год назад

Doubt it, it's not on mqb platform.

@fphfphfphfphfph 2 года назад

Hey man awesome video, I didn't have byte 05 on my instrument panel controller but still got the Traffic sign menu option so thanks Question, do you know if after I install OEM Blind Spot System it can be coded with OBDeleven? What are the steps?

@laymandiy 2 года назад

If you don't have blind spot from factory then you're missing the mirrors and the 2 rear sensors that go into the bumper. You won't have be able to just code them in.

@fphfphfphfphfph 2 года назад

@@laymandiy I have the whole hardware from harnesses, radars or controllers and the mirror indicator lights, I know how to connect the wires I just need to understand how to code it using OBDeleven

@fphfphfphfphfph 2 года назад

@@laymandiy actually all the hardware is OEM and specifically for my VW CC

@sheledmikymo Год назад

hi my vcds wont let me enter any functions for my mqb, any ideas why?? did you need any fec/swap codes etc and was/is your car code protected?? cool video

@laymandiy Год назад

Not sure, is your VCDS genuine?

@balafae2864 Год назад

i dont have a driver assistance control unit on a cupra ateca any ideas ?

@laymandiy Год назад

The effort involved in enabling this would not be worth the hassle if you're asking this question. Unfortunately they are not a simple plug and play device.

@kadir0vic Год назад

Hi Laymandiy. Just a question. I have golf 7.5 1.5 tsi rline 2017 model with acc and front assist with blind spot mirrors and I have also virtual cockpit. But I dont have lane assist with traffic sign recognition. Do you think I can enable it with and make it work with ur instructions?

@laymandiy Год назад

There isn't enough information here to determine. Front assist and acc doesn't mean you'll have TSR. The main thing is the camera given that you don't have lane assist or TSR already makes me think you don't have the right camera.

@kadir0vic Год назад

@laymandiy Thank you for ur response 🙏 I also think I don't have the camera. But I need the oem parts to make it work. But I don't know which camera part exactly I need. I don't wanna use a thirt party part.

@laymandiy Год назад

Don't think there is a third party part you can even use. Part should be easy to find, just find the parts catalogue online and look for the part number for a spec of vehicle that has it. Most likely will start with 5q0 ...

@DzenanKotoric 2 года назад

Will this same process work on a 2018 Audi B9 with virtual cockpit

@laymandiy 2 года назад

I have been informed that if you have the right hardware, there will be the extra step of parametrisation of the camera required

@mikeparry8131 2 года назад

I bought the OBDeleven PRO pack, and I can access the car and all the apps etc. When I try the first step with 5F/multimedia, car_function_list_BAP_Gen2 is not in the list. I have a 2022 Scala. Any ideas what might be wrong please?

@laymandiy 2 года назад

Yes, so newer models are struggling with this. There is more security. Once it's been worked out, I'll post a new video. As it stands there is a step that you cannot do without vw involvement so stuck atm.

@mikeparry8131 2 года назад

@@laymandiy Ah, I see. I couldn't use any of the apps either - they let me select "yes" but then failed to write after I ticked save. The credits were used then refunded. Was that also caused by the additional security? Is it worth me keeping the product? I currently can't do much with it. When do you think it will be worked out? Thank you for your help so far.

@laymandiy 2 года назад

I wouldn't touch the apps at all.. they are just a series of commands in a script, known to cause problems, because you don't know what exact changes it is doing. Up to you, it's a good diagnostic tool as well for all VW maybe help some locals out for a couple of quid here there and you've made your money back

@ashishchavan2194 2 года назад

Will this work for Audi A4 b9 MY2017, this one is with lane assist and I can see the camera behind the rearview mirror. If yes what kind of obdeleven should I buy, I can ses there are different versions available online. I'm in Australia.

@laymandiy 2 года назад

This is for mqb platform you have MLB where the camera needs to be parameterised first followed by these codings on obd11 or vcds

@ashishchavan2194 2 года назад

@@laymandiy so is it possible for me to parameterized the camera? Or should I take my car to mechanic to do that? Sorry but all these terms are very new to me. I just googled the mqb vs mlb platform so got to know my car is on different plantform.

@laymandiy 2 года назад

You can parameterise yourself if you know how, it's not as simple as what is shown in this video. You'll need to research and learn what's required the steps etc.. you can use VCP or ODIS plus you'll need the interface to connect to your car. Any old mechanic cannot do this you'll need to go to retrofit specialist.

@chimo3531 2 года назад

Hi, I have a Kamiq with Amundsen radio, ACC and lane assist. I have the camera and radar etc. Can this be done on my system taking into account its an Amundsen System? thanks

@laymandiy 2 года назад

Is your lane assist adaptive? I.e. you have adaptive option which centres the car between the lines?

@chimo3531 2 года назад

@@laymandiy not sure but the lane assist does automatically steer the car back to the lane if I don't touch the wheel. I don't think I have an option to change that to just notify of lane change. If I don't indicate, the car will try to steer its way back into the middle of the lane

@Persiana.Paradise 2 года назад

Hello my friend..I don't have last step on my car ....traffic signs display uncheck....what I do now?

@laymandiy 2 года назад

Car make, model, year, and which step are you doing?

@usmansajid1118 Год назад

also what version of OBD 11 do you have? as when i go to long coding and toggle to byte, i just get numbers, however the one in your video gives a description of what each one is?

@laymandiy Год назад

It's not the version, it's the car. It dependant on obdeleven company putting descriptions for your car in the database.

@tzlileliaguyev7645 2 года назад

Error: dynamic road sign display… how can fix that after enable all this? Octavia 2014

@laymandiy 2 года назад

Is it permanently on ? Normally clearing all the faults and a drive fixes it

@christianbettoni81 9 месяцев назад

Hello, at 3:15 I've 00. Byte 16 all bit are 0 whitout name descriptions

@christianbettoni81 9 месяцев назад

(I've 5Q0 camera with a working Lane Assist)

@RiminiVirage Год назад

Might this also work on a 2018 Seat Leon TDI? Thank you.

@laymandiy Год назад

Yes it would.

@mohammedsameer9728 2 года назад

Hi . I own an VW TRoc 2021 mode and does come with MQB3 infotainment system . Some of the setting shown by it are not available at all can you help out

@laymandiy 2 года назад

Need more then that, have you got the cameras?

@mohammedsameer9728 2 года назад

Yes I trust I do have the cam Is there any way to check

@laymandiy 2 года назад

Easiest would be the trim level you have. But if you look at the rear view mirror if the base it goes into isn't at least a handspan then you don't have the camera... Bear in mind there are 2 types of camera and the bigger one is the one you need

@angelovlachos5834 2 года назад

Hi there, owner of a Tiguan tsi 245hp R line with the big camera. Tried to enable traffic sign recognition through the obd eleven app which costs 100credits, and while the app is scaning i get the message "function is not available". I could try going the long coding way but from what i see on the web nobody has succeded on activating traffic sign recognition on facelifted tiguans......there must be something that vw has done there.

@angelovlachos5834 2 года назад

Tried the long coding way, and there's nothing remotely similar as option to what's shown in your tutorial video or in other pages in the web. Vw must have changed something on newer >2021 Tiguans

@laymandiy 2 года назад

Yes they have.. newer ones require parametrisation on the camera to enable the bits and adaptions on the obd11. Unfortunately it's out of scope for most people as it requires using official VW equipment with a dealer code.

@hussamal-khalili7948 Год назад

Thanks for the video, i am wondering if the same will work on Vw ID4 Crozz Pure + . any idea

@laymandiy Год назад

Definitely not

@hussamal-khalili7948 Год назад

@@laymandiy any idea for ID4 cars in how to do it

@teemumakkonen 2 года назад

Can you do this same video with car scanner pro? Taking a challenge.

@laymandiy 2 года назад

Sorry, I don't think so. As it doesn't have the adaptions / long coding

@Timify27 4 месяца назад

Hi there, thanks very much for the great video. It worked a treat how unfortunately my lane assist is now not working. I cannot tick it within the car settings and on OBD11 it says it is not supported. Please can you help? It was working perfectly before activating TSR. Thanks very much.

@laymandiy 4 месяца назад

Have you used an ob11 app at some point?

@Timify27 4 месяца назад

@@laymandiy sorry for the late reply. I've used to activate some apps with credits, but never long coding before. Any suggestions at all please? Many thanks

@garynicholson360 2 года назад

Thanks for the video. I have a 2020 Superb iV with Columbus Infotainment and Virtual Cockpit. Will all the steps be the same?

@laymandiy 2 года назад

Yes..

@garynicholson360 2 года назад

@@laymandiy Both OBD and modules look a little different for me. 'Traffic sign recognition 0x21' (no underscores) is found under 'Vehicle function list BAP' 'Menu display road sign identification' is found under 'Vehicle menu operation' When long coding, none of the bits are labelled. On updating controller 17, byte 5, bit 2, I get the same 'Dynamic Road Sign Display Error' in the dash, so same coding seems to apply Finally, on locating controller 5F, byte 24, bit 6, it was already unchecked, despite the fact that I have the display of Nav traffic signs activated. This makes me wonder if the coding should be different on this model? The end result is that no traffic signs are displayed and I when I select the Road Signs in the dash, I get the 'Road Sign Display Error' message. Any thoughts or advice you can offer?

@laymandiy 2 года назад

@@garynicholson360 The slight renaming of things is poor admin from obd11 however the byte/bit may not have descriptions for your vehicle but if it's mqb platform you should be fine. As always it's advised to do a backup so you can revert to it. However similar names under a different adaption, I don't think would work. However this is the beauty, you can try it and revert if it doesn't.

@paolopiemontese1077 Год назад

HI. I did the coding but until I find road signs it doesn't show me anything. shouldn't the limits of the navigator database go out when it doesn't detect signs? before it gave them to me on the navigator. Thank you

@laymandiy Год назад

Did you flip the VZE toggle?

@paolopiemontese1077 Год назад

@@laymandiy what is it about?

@laymandiy Год назад

Please watch the section in the video about vze

@lpalominomiranda 8 месяцев назад

Hello: Great video. Will this work on a 2021 Audi Q8? Thanks

@laymandiy 7 месяцев назад

I normally say after 2020 it's hit and miss with these procedures, so unlikely, sorry.

@Beauty71 2 года назад

Work on Octavia 4 (2020) ? I have camera and line assistent...

@laymandiy 2 года назад

You can try it, somewhere in 2020 they switched to requiring parameterisation

@Chrismalkinuk 2 года назад

I tried this on my 2019 Audi A4 but it threw up an error. I’ve coded lane departure and it works fine, is there another way to do it?

@laymandiy 2 года назад

What was the error?

@laymandiy 2 года назад

There is one other way to do this but need to know if you have a HUD

@llywmog 10 месяцев назад

Great video. Anyone know if this will work on new Ford Tourneo Connect which uses the latest Caddy Life platform? I already have OBDEleven that I've been using on Mk6 Golf. Thanks

@laymandiy 10 месяцев назад

Definitely not, this is vag group

@llywmog 10 месяцев назад

New Tourneo Connect is made by VAG so I wondered if it would work - same factory, hardware and software @@laymandiy

@laymandiy 10 месяцев назад

I am aware but I'm not sure what diagnostic interface it uses. I would assume that it would be ford for service etc. Nonetheless even if it's VW, it wouldn't be possible since it would require parametrisation as well which is not possible with obd11

@MTKOZ Год назад

Any idea if this works on MQB EVO platform ? (8Y RS3) Thanks

@laymandiy Год назад

Not at the moment.

@spohntaneous 2 года назад

i have a new 2022 SEL Jetta. I followed all of your steps yet when I hit the start button I hear a din and the following message shows up on my dash. Error: Dynamic Road Sign Display. I double-checked all of my steps and it still shows up. It shows up in my MIB and the box is checked for Traffic Sign Recognition.

@laymandiy 2 года назад

Take it for drive, if not then I'm afraid you also need camera parameterisation. It's a newer model thing.

@spohntaneous 2 года назад

@@laymandiy I have taken it for a drive and still the same result. I will check around for some more information since it's a later model. Thanks for your great video!

@laymandiy 2 года назад

Most likely the the camera needs to be parameterised

@Cns622 Год назад

Hello. I have a 2017 Audi Q7 and was wondering if I could do this. I do have the camera I believe but I don’t have the drivers assistance package so no lane keep and TSR etc, but I do believe I see a camera there. Would I need any other tools to do this? Thanks

@laymandiy Год назад

Seems unlikely they'd install a camera if you have nothing that uses it. The camera is pretty big from the front of the windscreen you should see two notches, one is camera and the other is rain sensor. Sounds like you probably just have the rain sensor

@Cns622 Год назад

@@laymandiy I did take a closer look and there is a camera there above the rain sensor. I did also look at my dads s5 which has drivers assistance and they look the same. It does make some sense from a manufacturing perspective to just make one assembly for all q7s so that maybe why it’s there. I do also have pre sense so that’s why it could be there. I’m not 100% sure if it is the right a5 camera I’ve seen mentioned and if it is will it require tweaking and coding I’m not willing todo to get the rest of the drivers assistance besides acc

@laymandiy Год назад

There's two ways either obd11 it and do the changes see what pops up. Or detrim and check the model of the camera

@Cns622 Год назад

@@laymandiyI do believe it will work as I just activated lane keep assist with the obd11 app and it works. I only have the free tier so I maybe I’ll poke around later

@jorgeplaza7938 Год назад

Hi, will this work in a Skoda Karoq MY22? Thanks in advance

@laymandiy Год назад

Sorry, not at the moment.

@mindaugasmandziukas4538 5 месяцев назад

Awesome video thanks. Do you think this will work on a 2021 SKODA KOROQ with Front Assist function.

@laymandiy 5 месяцев назад

It's still possible. However there are extra steps outside of vcds to do, unfortunately.

@mindaugasmandziukas4538 5 месяцев назад

What would be that extra step?

@laymandiy 5 месяцев назад

Parameterisation of the hardware , you need to do it online direct with vw

@nilsmarkusrye5889 Год назад

Hi, «the traffic sign recognition vze» says that the function is not available to me. What to do? I have golf mk7 2015 model with camera in the windshield. Everything else worked, and i see the menu in my MFD

@laymandiy Год назад

Vze is hit or miss. Have you taken it for a drive?

@nilsmarkusrye5889 Год назад

@@laymandiy hey thanks for replaying. Yes i have and its working. But when i drive past a speed limit with 60 and a line over (means the speed limit is 80) then it shows nothing. And whwn i drive it sometimes says «limited functionality» on my MFD display. What does that mean? I am living in Norway btw.

@laymandiy Год назад

Limited functionality means it hasn't picked up a road sign either from the camera or the maps data. Laws around speed on maps vary from country so it could be multitude of things. yh it might not have what that means. In the UK a kind of black and white no entry sign means national speed and it does pick that up on mine.

@nilsmarkusrye5889 Год назад

@@laymandiy thats what i mean, black and white sign. I asked a friend with an audi rs3 218, and his car detects those signs as well. There are nothing i can do? At least its working with most speed limit signs.

@p_peja Год назад

My Kodiaq 2019 has Bolero infotaiment (no satnav). The car has A5 camera and lane assistance. Does this procedure also works for my type of car?

@laymandiy Год назад

You can try, but I think the bolero struggles with the fusion mode where as Columbus works out of the box and Amundsen has a better chance.

@p_peja Год назад

@@laymandiy thank you for answering!!!! What is fusion mode? I run navi with my phone over Android Auto and USB and have no speed limit shown on instrument cluster (if this is fusion that you have mentioned). I just need that road sign that is read is shown at instrument cluster in front driver, but not on the Bolero. Can I just skip some of your steps then?

@p_peja Год назад

@@laymandiy Yeap, works, but works very bad and unreliable.

@laymandiy Год назад

I think you'd need to follow all the steps and flick between fusion / non. Fusion steps in to substittute map data

@nobart69 2 года назад

Hi, I treid several times but without any luck. I'm using the IOS app and the car is a nov 2020 Kodiaq L&K. I have the A5 front camera, but my app only shows the "Car_Function_Adaptions_Gen" not Gen2. In the end I get an error message Road sign not availible. It took it for a ride but no change. Anyone ???

@laymandiy 2 года назад

If you click on the control unit, go to the live data parameters check if you have "SFD activated status" Unfortunately, newer cars, VW has put some security that obdeleven can circumvent but it's a bit of a hit and miss.

@nobart69 2 года назад

@@laymandiy Thanks, will check it tomorrow.

@psilos7 Год назад

Hi there, I have an Audi Q3 F3 2019 without navigation and bought the dongle from Kufatec to enable traffic sign recognition. It is working, camera is reading traffic signs, but after 2 minutes I always get the same warning on the dashboard. "Traffic sign recognition is limited, please check your manual" or something like this. Although it doesn't cause any problems, it is very annoying every single time, 2 minutes after ignition to get the same warning. I'm pretty sure it has to do with the absence of navigation. Any recommendations to avoid this stupid warning? 🙂

@laymandiy Год назад

Link to navigation isn't superficial. Try flicking the VZE parameter in long coding. Also silly question, is your windscreen clean.

@psilos7 Год назад

The windscreen is crystal clear 🙂 I will try this, but as far as I have searched a lot of people have the same problem with me and noone has ever found a solution. I think the VZE parameter was unchecked

@laymandiy Год назад

I can see why not having maps can be an issue. Would it be easier to add navigation?

@psilos7 Год назад

No, it is almost impossible. I'll have to change the infotainment unit, change the wiring and then verify the new infotainment in an official AUDI service. And I forgot to tell you that AUDI says that I cannot make this upgrade 😛 dead-end!

@anthonymillar6183 Год назад

Do you know will it work on octavia mk4? Thanks

@laymandiy Год назад

Most likely no

@DJIDroneTravel 2 года назад

Can you do one for how to active lane assist too please 🙏

@laymandiy 2 года назад

Would love to, but lane assist is slightly more complicated as you need to have the right hardware installed and enabled. Unless you're talking about the "drunk" version of lane assist

@amitchauhan1979 Год назад

I turned it on using OBDeleven but since mine does not have the control switch it is always on and activates on speed higher than 40mph. I would agree to layman that it is mostly drunk version.😊

@manos_kouklakis 2 года назад

does this work on skoda scala too?

@laymandiy 2 года назад

If you have the big camera (A5) then yes. Or if you already have lane assist.

@baryfmarhg8023 6 месяцев назад

Does it work on a5 b9 2020 ?

@laymandiy 6 месяцев назад

50/50 it has a chance of working. 2020/21 is when things started to change

@jaredphillips2492 Год назад

Would this work on a 2023 Audi Q7 Premium Plus?

@laymandiy Год назад

Not yet. It doesn't really work on cars 2021 onwards

@mariejosado Год назад

Will it work on aN aUSTRALIAN Golf 8 Life (2022-23)?

@laymandiy Год назад

You'll need the right hardware, but there are extra steps required such as parameterization which is another security step requiring dealership software. Not possible with just obd11

@mariejosado Год назад

@@laymandiy Thanks. I have the latest Golf Mk8 Life (1 month old) with all the required hardware (camera in windscreen etc). For some obscure reason only the vehicles sold in Europe and UK have this function enabled but not in Australia. Function can be enabled on a Mk7.5 but the same technique does not work on the Mk8. Dealer is not willing to do anything! Hence my interest in your method.

@yury.k 2 года назад

Thanks for the effort LaymanDIY! I was so inspired by this, that I bought an OBDEleven PRO setup and attempted to do this on 2022 SQ5 Sportback. Could only find the first and the last step in the procedure that match. Is that something that is known?

@laymandiy 2 года назад

What trim level do you have? You need at least premium plus or greater...

@yury.k 2 года назад

@@laymandiy I do have premium plus.

@laymandiy 2 года назад

@@yury.k So whilst you have the hardware, these steps are for MQB you have the MLB Evo. So whilst this may not work for you, it appears you have the hardware ready. I will have to look into MLB evo I do not have a car at hand to make the assesment.

@laymandiy 2 года назад

I have found that it's a 2 step process. 1st step is paramatisation of the camera which can only be done using ODIS / VCP and the second step is to use obd11 or vcds to finish the coding.

@yury.k 2 года назад

@@laymandiy Thank you for trying! Are there any instructions that cover that process?

@birnojasmin Год назад

How activate navigation on octavia 2022 model

@laymandiy 10 месяцев назад

You'll need paramaterization as well. Cannot be done with vcds / obd11

@bartosznowakowski2379 2 года назад

Hello. Superb 2020 after these steps on the odometer - a malfunction of the road sign recognition

@laymandiy 2 года назад

Are there any steps your weren't able to complete? Have you driven the car since?

@cedosimke9468 11 месяцев назад

Hello can u activate so u can see signs in every country??

@laymandiy 11 месяцев назад

Everywhere where it is legally allowed, yes.

@bwset69 2 года назад

This only works with factory installed cars gps with maps on infotainment screen ?

@laymandiy 2 года назад

Gps and maps aren't the relevant items on this. The high line camera on the front is.. it needs to be there for it to detect traffic signs .

@bwset69 2 года назад

@@laymandiy cool ! My VW Atlas comes with front camera sensors .. I’ll try this with my OBDeleven … thanks

@PrakashK_C 6 месяцев назад

Hey, nice video, can you help me if this works in the 2019 Skoda Karoq SEL model?

@laymandiy 6 месяцев назад

Should do, yes if you have all the hardware.

@PrakashK_C 6 месяцев назад

@@laymandiy it has got a camera on the windscreen. What other hardware do I need? Thanks

@pinotuzzolino 11 месяцев назад

Hy, this works with polo 2023 mib3? Thanks

@laymandiy 11 месяцев назад

Not yet

@anzalpatankar8715 Год назад

I’m trying to do same Steps for my New VW ID 4 but my Multimedia have only 2 Long coding steps Please Help

@laymandiy Год назад

Sorry this is most likely not compatible with your car.

@anzalpatankar8715 Год назад

@@laymandiy copied on that thank You for prompt Reply

@jamesstanley7263 Год назад

Do I need the pro version to activate this?

@laymandiy Год назад

Yes

@Masedo5555 Год назад

hello, I have seat arona 2022 style, it has an camera, is it suitable for this feature?

@laymandiy Год назад

You'll need additional tools not just obd11

@Masedo5555 Год назад

What is additional tools, could u tell me pls?

@laymandiy Год назад

For starters, vcp, subscription VW servers to activate and finally this to do the coding (you can use vcp also)

@Audifans-gq8fp Год назад

Hi. Thanks for this video, but I followed every step on my 2018 Audi RS4 B9, it has road sign recognition surface on my virtual cockpit, but it is actually cannot recognize any sign when driving. Can you help me?

@laymandiy Год назад

What country are you in?

@Audifans-gq8fp Год назад

@@laymandiy New Zealand.

@laymandiy Год назад

I would go back redo the steps, perhaps try flicking the VZE toggle

@Audifans-gq8fp Год назад

@@laymandiy Yes, I did the flick the vze to coded, and the MMI has a menu to set +10km/h, +15km/h, but the instrument cluster cannot show any traffic sign.

@laymandiy Год назад

Does your nav screen on the dash not cockpit show speed signs, even as the ones from maps or better yet the one being scanned by the camera?

@candasm Год назад

Thanks for the video. Did you get an info message with "Dynamic road sign display currently restricted".

@laymandiy Год назад

Yes I did. It will disappear when you start driving.

@aposey7978 2 года назад

Would this work on audi RSQ3 2016 plate?

@laymandiy 2 года назад

Yes, I believe it should, as it's old enough to not require parametrisation

@lb1011 3 месяца назад

Does this work on a Skoda Octavia 2013 with lane assist?

@laymandiy 3 месяца назад

If it has all the hardware, don't see why not

@lb1011 3 месяца назад

@@laymandiy It has the camera on top of the window as you pointed out. What does the traffic sign recognition actually do?

@laymandiy 3 месяца назад

@@lb1011 all I can say is give it a go. The camera recognises real traffic signs. Really useful for variable speed limits.

@vlad8985 Год назад

will it work for an Audi A7 2013?

@laymandiy Год назад

Possibly, but doubt you have the hardware installed. Plus it's the mlb platform so steps will be different

@3radug 10 месяцев назад

hello, does this also work for kodiaq 2023?

@laymandiy 10 месяцев назад

Not without paramaterization.

@heaterandspaparts Год назад

Unfortunately this didn’t work for a 2022 Cupra Formentor (Australian version).

@laymandiy Год назад

Unfortunately it only seems to work well with the first gen mqb hit and miss with the second gen (depending on hardware used) and doesn't work at all for Evo.

@pohy9653 6 месяцев назад

I have Cupra Formentor 2022 Europe, and i dont have traffic sign recognition, but i do have traffic signs on my nav. Can you tell me could i code it on virtual cockpit, at least i would like to have signs from nav read on cockpit?@@laymandiy

@koray6834 2 года назад

Do you happen to know if MK7 Jettas need the camera paramitised? If so, where would I even go for something like that?

@laymandiy 2 года назад

Early jettas no, but somewhere around 2021 it would

@spohntaneous 2 года назад

@@laymandiy I have a 2021 SEL Jetta and it says no road signs available and yes, I do have the camera. What does need the camera paramitised and how do you do that?

@laymandiy 2 года назад

Were you able to follow all the steps

@spohntaneous 2 года назад

@@laymandiy yes, I followed all the steps which were outlined.

@laymandiy 2 года назад

Were there any steps that you couldn't do? Have you taken it for a drive since?

@Maher-h Год назад

do i need navigation funktion in my car to activate traffic sign recognition

@laymandiy Год назад

It's not necessary but if you don't even have nav then I doubt you have the right camera

@Maher-h Год назад

@@laymandiy how do i know what type my camera is , i'v Skoda Superb compi 2019

@laymandiy Год назад

The profile of your rear view mirror base. If it's large with a camera lens

@barteh 2 года назад

Great video, thanks for sharing. Ive got the new menu displaying now in the VC, but can only get a "no road sign recognised" error. Im based in the UK. Do you know what the issue might be?

@laymandiy 2 года назад

Have you taken it for a drive?

@angeloago5869 2 года назад

Hello is the same for passat b8?

@laymandiy 2 года назад

Depending on the year, yes.

@tyranic1 2 года назад

When i enter the byte and bit info and press the green tick it does not save. A red box comes up and says 31 not available. This is for byte 16 bit 04 in the video at 3.00 in the video.

@laymandiy 2 года назад

Are you able to see the option for vze?

@tyranic1 2 года назад

@@laymandiy is that in the same A5

@laymandiy 2 года назад

Byte 16 bit 04 should read traffic vze somethinf is that the same for you as well?

@tyranic1 2 года назад

@@laymandiy there is no descriptions when i look at the (bits) for each byte. On yours it tells you on some of the bits what they activate.

@laymandiy 2 года назад

Make model year and trim level please