This tutorial shows the steps required for retrofitting the TSR functionality to any MLB vehicle with Modules 85 and 8E available. #vcds #tutorial # vag-com #audi #vw #vag #diagnostics
Hi, I have activated everything. It show on my cluster I have the additional menu, however it doesn't show on top left of cluster when in another menu. Can you help ? I've coded the cluster as well
Hi, Nice job, thanks for the video 🙂 I've activated everything and have additional menu, but have no traffic sign on my cluster, this is not a problem at all. The problem is that I've got this error: ''ACC and Audi Brake Guard Unavailable'' right after I've uploaded image file ''ZDC'' into E8. Tried to clean fault code: U111300 with VCDS but no chance! Is it possible to UNDO upload? Any suggestion/ advice would be much appreciated. Thanks.
I had the same problem now I have to take my vehicle to the dealers. Clearing the code does nothing. Because when you upload the ZDC file you click Erase Full Memory, you (and I) have deleted the correct file and uploaded a file that is not suitable for our vehicles. This will cost us to fix as I also am waiting for a solution but nothing.
So unfortunate to hear that! Like @jorianmuca4569 said, if you don’t have the file for your vehicle, the correct one, you need to go to the dealer. What is your vehicle model?
@@jorianmuca4569: Thanks for reply. That's very true, I've erased full memory and uploaded wrong version of ZDC! But I could erase all fault codes by undoing everything that I've done. Now I have ACC and Audi Brake Guard available again. Actually I think that ACC and Audi Brake Guard have been available whole the time although there was warning on the cluster: ACC and Audi Brake Guard Unavailable. My recommendation is to UNDO everything you have done with VCDS and also in Green Menu as well (this is VZE conflict by activating VZE on Green Menu and in module J285, VCDS ECU 17) It's worked for me, hopefully works for you too. What I need now is the correct version of ZDC file which is: ''a6_c7_imageProcessor_Camera_4g0907107b.zdc'' and not ''a6_c7_imageProcessor_Camera_4g0907107e.zdc'' ''b'' version is correct one for me, but I couldn't get/ find it yet since I don't have original VCP interface! Hope so that someone can help me out 🙂
@@l2ra2666the problem with me was that the fault occurred the moment I uploaded the wrong file with VCP without even making any changes on VCDS, so it was the changes on VCP that caused the error. I have now fixed it by taking it to Audi which cost me €250. So I don’t suggest doing all this with Chinese equipment and non official software. Not worth it.
@@jorianmuca4569 That was so unfortunate! And very true, I think that I shouldn't use cloned VCP. Thanks for your advice 🙂 Kufatec selling a dongle which is locket to the VIN for €188,- They mean that it will done the jobb.
Thank you! Unfortunately, for some reason, I cannot post links in the comments. Search for "Traffic Sign Recognition "Out Of operational Area" error Fix"
Моята кола има параметризация,и всичко е активирано,но докато не се изключи предпоследния бит в 5f в байт 24,системата дава “outside of operational area”.След промяната в гореспоменатия бит- дава “currently restricted”,но хваща знаците,които камерата вижда.Някаква идея как да се премахне тази блокировка по държава ? С одис махат блокировките на по-новите автомобили,за тези с 8е вероятно също става но нямам одис под ръка и не съм гледал какви настройки има.При вас работи ли в България без да дава грешка ?
Единствения режим, в който може да бъде подкарана системата в България на това поколение автомобили е въпросното отзитне само от камерата. Дори с Одис - няма активацията, както при по-новите платформи. Кой автомобил и година имате Вие?
@@pavelppp888 S7 15.,фейслифт.С 8е камерата е.Аз ще се постарая да видя дали с одис няма да има параметризация за геолокацията.Виждам в клипове от Румъния и Литва че работи без грешка.При този сетъп - единствено ме дразни,грешката currently restrictesd,която се показва след минаваме на определено разстояние.
For me didn’t work, A7 2017. And now I have an error code for the ACC and breaking guard is not working. It has messed up my ECU. Is there a way to revert back the changes? I uploaded the ZDC file and clicked the Erase Full Memory button on VCP software. When I do a diagnostic scan I have error codes for the ACC, Sele Park etc One of the codes for the ACC is: U111300 - Function limitation due to incorrect value recieved - no communication.
@@Cepelinas100 pranešk kaip sekėsi. Pas mane fl, ir meta "out of operation area". Visdar kolkas nerandu kaip aktyvuot ant fl , bet iš principo 150e tikrai nemokėsiu lt gudruoliam, kur gali pats pasidaryt 😆
Здрасти, кой е точния парт номер на 8E модула? Дори и да изпратя файла, е кодиран към конкретното Vcp устройство и моя файл няма да тръгне при теб. Трябва ти да имаш същите файлове налични, просто са ако не греша в папка zdc в инсталационната директория на Vcp-то. Тях вече ще може да използваш с твоето Vcp