Trafic Vivaro Primastar Wiper Stalk Switch Fix 

Great informative video, saved me time when i needed to replace my indicators stalk, got it from ebay for £22.50(aftermarket obviously, but with the warranty), followed instructions- 15 minutes and job done! You will need Torx 15 screwdriver to undo those bottom screws. Many thanks

Brilliant video, great explanation. And it is good to see that you got the original part working, instead of just replacing it. 👍

Handy video thanks . Very similar problem on mine. Intermittent Not working. Needed a little bit of solder on worn tracks as well as general clean up.

Thanks for the video. My wipers will not switch off until I pull the fuse. I will have go at this.

Just a quick update that after taking apart the switch and cleaning up it's all still working. I recommend this method if you want to save some money, but obviously it will take longer.

Nice one, I was thinking the motor is just crap as I could hear the relay clicking, will give this a go

Thanks for the video, this is a ball-ache for me to look forward too!

Nice one mate...it worked, was doing my head in using full speed ...

Great video. Have same problem on my Renault trafic. Gonna have a go at fixing it tomorrow 08/11/23

Thanks for this . hopefully I will get round to sorting mine. Great video.

Just done mine. Work perfectly now thank you

I bought a new wiper stalk on ebay fitted it in 5 mins many thanks

thanks man, i did mine today, pretty straight forward, your vid helped me a lot, thanks so much for making it A++++

Brilliant thank you. I’m about to do one but this switch has trip mileage button on the end of the stalk, I’m hoping it’s the same procedure. Cheers

Top effort!! 👍

Hello mate. I have a vivaro and the wipers work but they stop in the middle of the screen and don’t return to the park position. I’m wondering if they have just moved (slipped) on the motor and need to just be reset or if I need a new motor or relay? Other than them stopping in the centre of the screen? They work perfectly. Any ideas? Thanks

really easy to do works great thank you

Good video generally very informative (bit shaky around the middle where you're finding those release studs) It allowed me to do a clean up of a mucky inside of switch. I found the second time I watched the video, that there was no commentary, just background sounds? When I reassembled I had some improvement ...I got back my standard wipe speed on pos 2 but only if I went quickly through pos 3 and to park fully only by judicious timing to off ! Still can't get pos 1 to be intermittent as it should. When in pos 1 it wipes at std speed but only turns off by itself after about 15 cycles. So now I'm wondering if there's an electronic relay box in the system and if so where is it ? I can't find it in the steering wheel cowling even though there is printed circuit board below the stalk assembly (I disconnected this and it had no effect on the wipers). Can anyone help please ? Many thanks for the video...it was encouragement to seek further.

I’ve just replaced a burnt out wiper motor and still have no function of wipers , I’ve checked all fuses even though a wiper fuse is not indicated in fuse box , I will try looking at stalk next

Great video mate thanks 👍

Hey my intermittent sometimes works if u get it’s swept spot it will. Tried this but still same do u think it need a new wiper steak switch

I did it and now van wont start imobilser stays on cant fire engine will crank though central locking works but just dont start

My wiper when it switched off it does not stop at the right place sometimes stop on the middle of my window screen, do you think the problem is the switch or the wiper motor ??

Hmm didn't work for me... 😑

Fortunately it's a video, I can hear every little movement and scratch you make but your voice is inaudible.