Trailer Bearings | Boat Trailer Bearing Installation | How to pack Trailer Bearings | Utility Marine

Подписаться 13 тыс.

Просмотров 337 тыс.

50% 1

*Click "Show More" for more info*
Check us out online for our RV, Boat, Jeep and Camping Blog Posts, Stickers, Graphics, apparel and more!!
========================================
Check out our NEW Website for 2023!!
www.milehighcampers.com
========================================
Mile High Campers Etsy Shop:
www.etsy.com/shop/MileHighCam...
========================================
Our eBay Store:
www.ebay.com/usr/undercovertr...
========================================
Follow Mile High Campers on Instagram!!
/ milehighcampers
========================================
Bearing Seal & Race Punch: amzn.to/3bftPck
Lucas Marine Grease 14oz cartridge: amzn.to/2XdbXGK
Grease Gun for 14oz cartridges: amzn.to/3bdgscz
I got a great deal on a bearing kit at Pacific Boat Trailers:
www.pacifictrailers.com
In today's video we will be replacing the bearings, races and seals on a boat trailer. We will show step by step how to remove the hub, how to pack the new bearings, how to remove and install the new races and seal and reassemble the hub back on to the spindle. This process will work for boat trailers, utility trailers and travel trailers. We also will be showing how to check and fill the trailer buddy bearing saver system. Trailer Buddy is basically the same thing as the Bearing Buddy.
How To Pack Boat Trailer Bearings | Trailer Bearing Installation | Trailer Buddy | Bearing Buddy RV
Trailer Bearings | Boat Trailer Bearing Installation | How to pack Trailer Bearings | Utility Marine
PLEASE NOTE: Mile High Campers is NOT a professional mechanic or repair shop, nor are we sponsored or get paid to do this video. We are simply sharing what worked for us. Please do your own research and/or take to your vehicle to a local repair facility.
*We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Mile High Campers, All Rights Reserved
*This channel is for entertainment purposes only. We are not Certified Mechanics, Jeep, Boat, RV or Travel experts. We share our opinions and what has worked for us, but you should do your own research.

Хобби

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 209

@Tamarinera23 3 года назад

This is THE BEST video explaining and showing how to change trailer wheel bearings. Nobody else talks about how to remove the inner bearing by pulling on the whole hub: ingenious! Also, you don't use fancy presses to get the races in and out: just simple tools and a work bench, like most of us have access to. I used a flat piece of wood to tap the sealer ring in, rather than the specialized tool you used. Thank you for a super teaching video.

@MileHighCampers 3 года назад

Thank you SO much for that comment, I really appreciate it!! My dad is a retired high school auto shop teacher so he knows all of the old school tips, I really like it when I can talk him into participating in a video!! Thanks again for the great feedback!!

@emersonpimenta68 11 месяцев назад

Thanks a lot mate, people like you helps people all over the world spending your day doing the service, filming, editing and posting. God bless you!

@hjs112 3 года назад

How in the world could anyone give this a thumbs down? This is a perfect step by step instructional video! Great job and thank you.

@MileHighCampers 3 года назад

I appreciate this comment SO MUCH!! it always blows my mind that people still find the need to hate on someone just trying to help people out for free, LOL. Best comment I have ever received, Thank you!!!!

@andrewharris6579 3 года назад

Anybody that needs to do their bearings.... NEEDS to watch this. Its a great video. I especially love and appreciate your dads explanation on how to pack a bearing. Thats the right way to do it for sure.

@MileHighCampers 3 года назад

Thanks for the great feedback and glad you liked the video!!

@CoyRanch24 4 года назад

Thank you. Exactly what I was looking for!

@MileHighCampers 4 года назад

Awesome. glad to hear the video helped you out, thanks for watching and taking the time to comment!!

@richardelinskas6663 3 года назад

What an excellent video! Thank you guys so much. Exactly what I needed.

@MileHighCampers 3 года назад

Glad to here the video helped you out, and thanks for the comment!!

@garyschwalm4842 2 года назад

Your Dad is awesome.... thanks for a great video and old school technology, simple tools, and a great instructor that demonstrates.

@MileHighCampers 2 года назад

Glad the video was helpful!! Thanks for the great feedback, I will be sure to let my dad know his old school methods are still appreciated!!

@scottdahl3975 2 года назад

Yes, great vid. Watched it primarily for a perspective on reinstalling the hub and found it very practical. Great job and thanks!

@mikemental 2 года назад

Thanks for the video guys, something I had never done but your explanation made it easy.

@tomlucas8642 7 месяцев назад

Very helpful thanks! Old school dad 😉 greasing the bearing was the best! Thanks dad!

@barrybebenek8691 4 года назад

Fantastic explanation guys. Thanks for posting this. 👍🏼🇨🇦

@MileHighCampers 4 года назад

Glad the video helped you out and thanks for taking the time to comment!!

@jarrod5722 4 года назад

Great video, very well done. Learned a lot, just what I needed. Thank you

@MileHighCampers 4 года назад

Thank you for the great feedback, glad you found the video helpful!!

@MidwestOutdoorExperience 2 года назад

Outstanding! Thank you for a clear demonstration with helpful tips!

@MileHighCampers 2 года назад

Glad you enjoyed it!

@nonyabiz2777 2 года назад

Clearly your pops was a great teacher. Nice work. Greetings from Loveland Colorado.

@simp33333jjjj 2 года назад

I just got into the parts business and I just want to say thank you. You literally broke it down to a point to even a dumb dumb could understand

@MileHighCampers 2 года назад

Thank you!! I hope it helped all skill levels!

@GuillaumeBaillargeon-pv2vs 11 дней назад

Thanks. Super useful!

@feeshermann726 2 месяца назад

Fantastic Video!! Many thanks!!

@stevep7517 4 года назад

Great instructions. I'm doing my trailer in the morning. Your video was very helpful.

@MileHighCampers 4 года назад

Thank you!! I really hope the video helped you out with your trailer!! Thanks for the positive feedback and thank you for watching!!

@joshuabeck7131 3 года назад

Thanks, thorough video. Didn't leave me with any what if questions.

@MileHighCampers 3 года назад

Right on! Glad to hear the video helped you out!!

@shannonharvey3448 3 года назад

Great video. Your Dad is a good instructor. Going to inspect my bearings now.

@MileHighCampers 3 года назад

Thank you! He is a retired high school auto shop teacher so he has a good background for this, I like when I can talk him into participating in a video!

@dnjimenez1218 2 года назад

Freaking awesome brother you and your dad working together and actually explaining and teaching great work……A little old school techniques and New school……great job you guy’s

@MileHighCampers 2 года назад

Thanks for the great feedback!! I always like when I can talk my dad into participating in a video, the man is full of DIY knowledge!!

@otel680 3 года назад

May have been a long video, BUT that was one of the BEST educational videos I've ever seen, your dad did a great job. Simple and all steps were covered. My trailer has a leaking seal that I was dreading doing, not now. Thanks guys👍

@MileHighCampers 3 года назад

Awesome, thanks for the great feedback!! My dad is a retired high school auto shop teacher, I love it when I can talk him into participating in a video!!

@krichards8472 2 года назад

great video thanks , needed to know how to put it back together with out taking another wheel off. thank you for your video, and your Dads training

@MileHighCampers 2 года назад

Glad the video helped you out, thanks for the feedback!

@garylcarrier 2 года назад

Excellent video!

@SurfNTurf54482 4 года назад

Great tip from your Dad on tightening the nut all the way to get everything seated, then backing it off for final adjustment!!

@MileHighCampers 4 года назад

Thank you for the feedback, my dad is an OG when it comes to this stuff he will glad to hear his advice was helpful, thanks for watching!!

@alexaboutalipov3180 2 месяца назад

the one of the BEST vidio ever. thx

@freeagentangler5159 3 года назад

Outstanding video, covered a-z!

@MileHighCampers 3 года назад

Thanks for the feed back, I appreciate it!

@PapaDukesFl Год назад

Thank you and your dad. I learned a lot and will apply this to my boat trailer.

@MileHighCampers Год назад

Awesome glad the video helped!! Thanks for watching!!

@JohnHolser 2 года назад

Excellent detail!

@k9kayaks 4 года назад

Just ordered a Trailer Bearing kit 1” Spindle L44643 from Pacific Trailers They had exactly what I needed and great customer service explaining what I needed. Thanks again for the informative video

@MileHighCampers 4 года назад

Right on!! Thank you for the positive feedback!!

@johnhsedgwick 3 месяца назад

Super helpful- thank you

@martygilpatrick9727 3 года назад

What a great video. To the point, no BS, well done!! Thank you. Hanna Trailer Supply in Wisconsin is also and excellent source for trailer and RV parts

@MileHighCampers 3 года назад

Thanks for the great feedback and recommendation!

@chansebetts3579 2 года назад

Like father , like son , you two together made an awesome step by step video on the complete take down and rebuild of bearing/racer and seals replacement. There is no video too long when you are learning how to do something. The problems that arouse during the video was golden , because we the viewers would need to see what to do next under those circumstances. You, your dad and Jesus will be along side me as I tackle my hub bearing replacement project, ( the 3 wise men ) Thanks bro!

@MileHighCampers 2 года назад

Wow thanks for those kind words and great feedback!! Glad the video helped and good luck!!

@waynesalekin6773 3 года назад

Perfect! Thank you very much!

@MileHighCampers 3 года назад

Thanks for the great feedback!!

@sheenahanak5174 3 года назад

For real, thank you!!!! I don't think my trailer had been serviced properly before I got it and the racers basically fell apart they were so old. I was very confused how to put it all together, so thank you so much!!!

@MileHighCampers 3 года назад

Awesome, glad the video helped you out!!

@claytonkeates2614 Год назад

This is a huge help thanks!

@rickamos2669 2 года назад

Excellent work,,,,, Thanks

@marciaewell2661 3 года назад

You made very nice video and I love that you got your dad to share his years of old school knowledge, like hand packing the bearings and how to preload and set the tension. I remember most of his tricks when I was young gal working on old drum brakes. I think these days it is important to use a seal, bearing and race installer tool instead of a steel punch as the punch will deform the metal. I remember using a socket or sometimes the old bearing, but so easy now to go to local auto parts store and get the free or cheap rental on the proper install tool to avoid damage to new parts. It is easy to misalign and ruin the seal, ask me how I know. I think it is always good to plan to check the tension on the bearings and to tighten up the manual adjusting brakes after a short distance as they will likely be loose after seating in from road travel.

@MileHighCampers 3 года назад

Thanks for the great feedback, I really appreciate it! I like when I can get my dad involved he is a retired High School Auto Shop teacher he has all the great old school knowledge!

@jarialshurfield5696 3 года назад

Father son video great job. I finally got to see and understand how to pack the baring with grease.

@MileHighCampers 3 года назад

Thanks for the great feedback, I really appreciate it! I like when I can get my dad involved he is a retired High School Auto Shop teacher he has all the great old school knowledge!

@jarialshurfield5696 3 года назад

Yes I remember that video. The Bob Ross of that shiy.

@Benmelech 3 года назад

Best tutorial I’ve seen for this project

@MileHighCampers 3 года назад

Wow, Thanks for watching and taking the time to leave such a great comment!!

@garyramsdale9340 3 года назад

Good video. HINTS Place race in freezer then use a block of wood on outside edge of race to hammer till the race is even with top of hub ( race goes in easier). Now use a socket that is just a little smaller than the hub opening yet makes contact with the race all around. Pound on the socket to seat the race in the hub.

@MileHighCampers 3 года назад

Thanks for the tip!!

@darthjar9117 2 месяца назад

You can also use the old race. Cut a slice out of the old race with a grinder and pound it in with a block of wood. The slit in the old race ensures it will come back out easily.

@ericwright3382 12 дней назад

Great video, thank you! 4:02 to 4:08, maybe it is perspective, but doesn't look like it goes through the center of the spindle.

@leonardwood8024 Год назад

Thanks for a very informative video.

@bethtempleton2631 3 года назад

Thanks!! I was kinda scared to beat the hub with a hammer but you eased my mind!

@MileHighCampers 3 года назад

Hope the video helped you out!!

@klr7793 5 лет назад

Very helpful. Now I know how to pack wheel bearings and I won't have to take my trailer to have it serviced. A real money saver. Thanks.

@MileHighCampers 5 лет назад

Thanks for watching and the good feedback!!

@mf6847 Год назад

Thanks for the useful info

@Maults_Mayhem Год назад

Thanks for the video it was really helpful

@vintagetin2322 5 лет назад

Great video, it's a lot of work but on a boat trailer that's in the water a lot it's critical. Good job.

@MileHighCampers 5 лет назад

Thanks for the positive feedback!! Thanks for watching!!

@brantleywest6640 4 года назад

Great video thank you.

@MileHighCampers 4 года назад

Thank you so much for the positive feedback, hope the video helped you out, Thank you for watching!!

@rickyarbrough7230 Год назад

great video

@Okie-Tom 3 года назад

Very good demonstration!

@MileHighCampers 3 года назад

Thank you for the great feedback!!

@Mrscottyboy4 3 года назад

Nice job thank you!!

@MileHighCampers 3 года назад

Thank you, hope the video helped you out!!

@robertgoora 9 месяцев назад

thanks a lot fantastic explanations

@brianfletcher4356 2 года назад

Thank you ! Well done

@MileHighCampers 2 года назад

Thanks for the great feedback, glad the video helped you out!!

@petervargas8474 2 года назад

Perfect!

@MileHighCampers 2 года назад

Thanks for the feedback!!

@SavageAlaskan1 2 года назад

Thanks for the video awesome job

@MileHighCampers 2 года назад

Glad the video helped you out, & thanks for the positive feedback!!

@jonathancraig4296 4 месяца назад

To me I saw too things. 1) Using a thin layer red hi-temp sealant on bearing seals. When done correctly, leave a nice red ring when excess wiped away after hammering in. 2) putting grease in the bearing buddies til maxed out. I have seen that cause more issues on boat applications than not. Pumping grease in until the blue indicator pushes out maybe half way to max is fine and prevents excessing pressure on seals when the hub heats up from travel. Otherwise, awesome video!!

@wyocoloexperience7025 5 лет назад

Good tips, Dave!

@MileHighCampers 5 лет назад

Thanks for checking out the video!!

@Sjs58 2 года назад

Outstanding video, thank you

@MileHighCampers 2 года назад

Thanks for watching and the great feedback, glad the video helped!

@anthony2558 2 года назад

Very helpful. Thank you.

@MileHighCampers 2 года назад

Thanks for the great feedback, glad the video helped you out!!

@gregsteele9002 2 месяца назад

The last person that owned my boat trailer apparently didn't Grease the bearings before driving 60 miles to deliver it to me, the outer hub on one of the wheels was so ground out from a failed bearing, that the new bearing race wouldn't touch the walls inside the hub. I had to grind the teeth off of an Old fashioned holesaw, and cut it to make a sleeve for the outer bearing race (the one next to the castle nut) to fit tightly. It worked great!

@CertifyThis 3 года назад

Very good instructional video.

@MileHighCampers 3 года назад

Thank you for the feedback!!

@pahanin2480 3 года назад

Good stuff

@MileHighCampers 3 года назад

Thanks for watching!

@MyActionAdventures 5 лет назад

Nice video. I need to do this on my flatbed trailer. I have a couple wheels that feel loose. Maybe when I get home from our 1 year Adventure. Never done it before. This video helped understand the process. 🤙🏽

@MileHighCampers 5 лет назад

So I was watching another youtuber last month and he was triple towing and the bearing went out on his boat trailer and it caused a small catastrophe for him. So it was a huge reminder for me to check my trailers!! Thought it would make for a good video for people. I ordered a spare set of bearings to keep in the truck at all times, LOL!! Online prices much better than the Auto Parts Stores. Thanks for watching!!

@MyActionAdventures 5 лет назад

My buddy had his horse trailer bearing lock up. Said the trailer jumped 5 feet in the air doing 65 down the road. Almost wrecked. Crazy things happen.

@MileHighCampers 5 лет назад

Wow, that would be scary!!

@seanbaxter1692 2 года назад

Great video

@MileHighCampers 2 года назад

Thank you for the great feedback!

@marcaustin 3 года назад

thanks much for this one brother

@MileHighCampers 3 года назад

You got it! Thanks for watching and the positive feedback!!

@RVBarndominium 5 лет назад

We had a boat a few years back but got rid of it before it needed all that done..🙄😏😮 Your Dad is cool! 😎

@MileHighCampers 5 лет назад

Thanks, my dad is awesome and can he can fix ANYTHING!! He will be helping with the install video for "the project" if you know what I mean!! ;)

@RVBarndominium 5 лет назад

@@MileHighCampers haha...great!

@MrRainbowrooster 4 года назад

Excellent video. Thanks

@MileHighCampers 4 года назад

Thanks for watching and the great feedback!!

@angelaratzay9034 3 года назад

@@MileHighCampersthank you thank you. Fantastic

@kenmccarthyfishing 11 месяцев назад

Thank you for the video,I did my bearings today and after watching your video I was having a hard time putting the outer cap on and realized I put a seal behind the larger washer,oops 😂

@rafaelmarin1963 4 года назад

Good job.

@MileHighCampers 4 года назад

Thank you for the positive comment, hope the video helped you out!

@leonbennett3190 3 года назад

Was very informative i have to do my jetski trailer bearings need replacing

@MileHighCampers 3 года назад

Glad it helped. good luck!

@alansmith2203 3 года назад

Thanks Fellas, well done. I especially liked the old school way of packing the bearings with flicking the bearing into the palm of the gloved hand and gobbling up grease and then reversing. Clever.

@MileHighCampers 3 года назад

Thanks for the great feedback, glad you liked the video!

@Muzikteechur 3 года назад

Great video, very detailed, and AWESOME that you could involve your Dad. Those old-school tricks like packing the bearings are an art and I'm glad to have seen it from a Master!

@MileHighCampers 3 года назад

Thanks for the great feedback!! Some times Old School is the way to go!! Thanks for watching!!

@mikehelms1537 2 дня назад

When taking out the back bearing seal you can take a 1/2 socket and hit it with hammer to get it out theback

@andersonj1each26 3 года назад

My trailer bearing blew out yesterday, just ordered new hub assembly and a bearing buddy. NEVER done it before and I was kinda stressing until I watched your video! I’m ok at working on my truck and stuff so if I don’t have to take it in I’ll do it myself and this video has made me know I overthink this and I’m ready to replace both on my trailer. Thanks!

@MileHighCampers 3 года назад

Nice I hope it worked out for you!! Thanks for watching and based on your profile pic, Thank you for your service!!

@andersonj1each26 3 года назад

@@MileHighCampers thank you for your support! Yes it helped a lot made it super easy to do. Took me like 30 mins to do both wheels

@MileHighCampers 3 года назад

Awesome glad you hear you got it done!!

@PaulyV56 2 года назад

outstanding video

@MileHighCampers 2 года назад

Thanks for watching and the great feedback, glad the video helped!

@awalker83 4 года назад

Awesome video gentlemen! I feel confident enough to change the bearings on my trailer now

@MileHighCampers 4 года назад

Right on, glad to hear the video helped you out, good luck with you trailer!!

@jonlittle346 3 года назад

Excellent. I will wait for more. More dad lol.

@MileHighCampers 3 года назад

Dads a retired Auto Shop teacher, he knows his stuff!

@krichards8472 2 года назад

dam good instruction

@MileHighCampers 2 года назад

Thanks for the great feedback!!

@dynamitedmoney 2 года назад

Fantastic video thank you! Where did you get the lugs for your wheels?

@theamerican7131 3 года назад

very good, PEACE

@MileHighCampers 3 года назад

Thanks for the feedback!!

@Laron53 Месяц назад

Great video! Question: If the bearings(rollers) aren't seated properly after taking out are those completely damaged?

@icheckraise 3 года назад

great video...if I need to replace a grease seal how do I know which one fits? I've damaged one I thought fit...can you buy the one compatible with the bearing and be ok? doesn't seem to go in easily is this normal?

@iWubmusic 2 года назад

This is great and has an old school feel but in my experience you should we use a rubber hammer and deadblow on some parts or wood block

@MileHighCampers 2 года назад

That is a great tip, thanks for sharing!

@bonekollektor1659 Месяц назад

Great video. So it's not necessary to fill the whole area between bearings with grease?

@lastresort1460 3 года назад

use the old race to hammer on to install the new race

@MileHighCampers 3 года назад

Great tip, Thank you!

@brianmac1 2 года назад

Good video, really enjoyed it and great it showed the step many miss out, replacing the outer races. Only thing I'd say, my dad always taught me not to use a carpenters hammer for auto work.

@MileHighCampers 2 года назад

Thanks for watching and the great feedback, glad the video helped!

@MuramasaMune Год назад

Very helpful video! But did anyone else hyperventilate when he tightened the nut with channellocks after all the great detail work??

@philliphall5198 Год назад

I reuse seal if not damaged Also install nut and hurl of will remove brg and seal

@tzampini 11 месяцев назад

Great video. However I have a trailer hub that has no indents to put a punch to knock the races out. There is literally no place for the punch to grab onto the race. Do you have any suggestions on how to get these races out? It’s on a Karavan SeaDoo jetski trailer. Thank you.

@k9kayaks 4 года назад

Great detailed info. Was looking for info so I can check my kayak trailer. Is there any such thing as a waterproof bearing housing so I can back my trailer into the water? I bought it used and have been careful not to put the tires into the water. Thank you

@MileHighCampers 4 года назад

To be honest I'm not sure. These were the hubs that came with my boat trailer, but there is not really any difference that I could see that would make them different from any other trailer hub, except that these had the trailer buddy system, which can be added to any hub with the same diameter. My hunch is that as log as you have the bearings packed and use a marine grade grease you probably would be ok... but that's just my opinion, you may want to search around to see what other thoughts are out there on the subject. Sorry I could not be more help.

@k9kayaks 4 года назад

Mile High Campers thank you very much for the reply

@kansascityshuffle8526 2 года назад

So do the seals have to against the bearings? Will the cap push the outer seal in to where it has to be? Or should it be set first?

@Basshole51 3 года назад

awesome video! How do I know how to pic the right hub kit? I have a small boat trailer for my 1546 flat bottom boat.

@MileHighCampers 3 года назад

Check out this video, it might be able to help answer your question. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TajYcbNo428.html

@johnnysalinas7082 2 года назад

I found there is a couple kits... how to know which is the right one?

@johnmcfarland4690 3 года назад

I've been using O'Reilly Super Lithium EP Moly Grease to pack my camper trailer hubs with a bearing buddy and the bearings appear to be OK (no wiggle room or noise when spinning the wheel). I've been using that grease for about 4 years based on someone's recommendation. It looks like I should have been using their High Temp Wheel Bearing Grease. Should I just continue using the Super Lithium or switch? If I switch can I just, can I just mix these greases or do I have to pull the hubs and replace everything? Thanks for the great video?

@MileHighCampers 3 года назад

Here is what the American Society for Testing and Materials says: "Specifications for two category groups: chassis lubricants ("L" prefix) and wheel-bearing lubricants ("G" prefix). Performance classifications within these groups result in two designations for chassis greases (LA and LB) and three designations for wheel bearing greases (GA, GB and GC). The automotive industry is in general agreement that the highest performance category, to date, in each group (LB and GC) is suitable for service relubrication." With that being said, from what I saw online, Super Lithium EP Moly Grease is service rated as LB. But you would need to check on the specific tube of grease that you have. LB and GC greases sound like they are different so I don't know if it would be a good idea to mix them. Personally I would go with the wheel bearing rated grease only. But by all means, do what you are comfortable with for your situation. Might not be a bad idea to do a little research to figure out exactly what the tube of grease you have is rated for.

@johnsellers9623 Год назад

I’m curious why you didn’t use the race and bearing tool on n the inside but you used it on the outside?

@tomhuynh7556 2 года назад

When you pump in the greases, make sure that the greases inside the hub and the greases from grease gun match. There are too many grease types and they may not compatible,

@MileHighCampers 2 года назад

Good tip, thanks for sharing!

@georgematos1086 2 месяца назад

How do you know the size to get for the bearings?

@timjackson2531 Год назад

Thanks im going to try this i have squeaking sound

@chiefer8368 3 года назад

So using a punch do put the race back in won’t damage the race??? Never done one bout to do my boat trailer. Seems like it would damage it or pit it up.

@MileHighCampers 3 года назад

If you had access to a press i'm sure that would probably be ideal... but that was a punch made for seal and race installation. Of course do whatever you are comfortable with doing, we were just demonstrating how we were able to do it with common hand tools, there are probably many ways it could be done. Good luck with your boat trailer!

@chiefer8368 3 года назад

@@MileHighCampers 10-4 I don’t have any of that I may have to buy a punch made for that as all I have are regular punches. If I can get away with using what I already have I’d be thrilled! Thanks for the video.

@MileHighCampers 3 года назад

If you decided to buy the punch kit here is a link to a fairly reasonably priced set that might work: amzn.to/3bftPck Good Luck, I hope it goes smoothly for you!

@chiefer8368 3 года назад

@@MileHighCampers thanks!