Transform Your Honda CR in Minutes! 

Who else failed no nut november when the bracket fit perfect

you need a CR500 to fill out the family

I like how CLEAN it looks. I need to clean up the look of mine.

Definitely picking this up for the cr250 build! You're the man Cam

This bike is sooo nice. I'd love to have a CR125 all built like this one day.

I just used zip ties for my number plate lol. It's a 17' front end conversion on a 2000 CR. I didn't have access to anything to make a bracket at the time but the zip ties work quite well. Nice & tight & no vibration. Glad to see you make legit brackets for it. I'll have to pick one up sometime.

I like more the original style, I think it goes better with the rest of the bike, but nice video Cam

I been wanting to make my Cr250r look fresher. This will definitely help without putting a hole in my pocket! Keep up the good work cam PRYME

PRYME BABY! Havent ordered yet but I've ordered the polish pads and stickers before. You always take time to reply to my questions which has helped me massively on my Cr build here in england. Respect bro

Hi Cameron, let me fill you in on some metal machinist trade skill to improve finish and accuracy. When drilling any sized hole, never drill up in gradual increments to a finish size. Look down on the cutting face of your drill bit, the central plane between the 2 cutting faces is called the chisel edge. Say for example your drill bit is M12. Measure with a rule the width of the chisel, it maybe 1.5mm in width. A pilot drill (a guide drill run through the material) should be no greater in diameter than 90% or 9/10th of that chisel edge width. So for a 1.5mm chisel edge the pilot drill should be 1.35mm (you would therefore use a 1.2 - 1.4mm drill). Drill pilot hole first. After the pilot you go straight to size. Alternatively, you can simply use the chisel edge as a gauge and select a pilot drill undersize to width of chisel edge, near enough is good enough so long as undersized. In your case I understand the plastic may bite, however, just some knowledge you may find usefull otherwise. Appreciate the quality of your work. Cheers from a 53yr old Australian machinist and bike enthusiast. Keep it up, love your work!

Man I love how the bracket uses the raised boss on the triple clamp just like the stock #plate. That is a very well engineered part. The details are where its at Cameron. PRYME STUFF MAN.

Pryme Going on the 05 CR 250 if all goes well. Nice video! Very instructional as always. One of my favorites so far was when you shaped up the track with the dozer. Those are dreams right there!

This is happening! Been looking for a way to freshen up my bike for ages! Great stuff as always cam

Already know it’s gonna be a good video! Can’t wait to transform my yz with a restyle kit

keepin it PRYME buddy 👌🏼 I ordered my bracket a little while ago, but I’ll put in another order if you end up picking my comment 😉 lol bike looks super fresh. Hell, all the bikes you have do. Keep on putting out awesome content!

Such a huge difference, but i did it with 2015 Fender and Plates.....looks amazing with custom graphics

PRYME i would live those plastics they would look great on my CR and make it look amazing again.

Pryme! Love the videos man. Been watching them for YEARS now lol

Thanks for making this video. I really appreciate your efforts. I have the 2003 cr125r. I have been building it for some time now. Finally wrapping it up and your videos have helped me alot with my build especially the suspension vids.

That looks unreal

I have a 2007 kx450f and I put a 2017 front fender and number plate. All I had to do was put a small nut and bolt coming through so that the number plate had something to fit itself onto it just slid on to the screws sticking up and everything else just lined right up I only had to purchase the four newer bolts with built on flanges they lined right up.

Pryme deffenetly want to restile my cr125 now🔥, keep up the good work!

Pryme My brother has a 01 cr125 so that would look sweet on his bike 👍🏽

PRYME Thanks for the great videos! I’m excited to get my updated front end on my cr250 thanks to your bracket and mounting template! Much appreciated!

Just recieved the bracket for my 03 cr250. Fit perfectly and I went with the acerbis raptor plate. Waiting on the front fender and hoping all lines up good. Thanks Cam!!

Hey cam sal from Canada you helped me over the phone with my fender mounting love the videos! Keep it PRYME!!!!!

Pryme looks like a sweet set-up

Pryme But I can’t order anything because I’m to young to have a credit card but I just saved up and bought and 07 crf 250 r and the front plastics are thrashed so I would love to win this give away it would be so awesome. Glad your healthy again Great vid love the content.👍

Pryme Loves the vids man

Nice bracket! It looks slick. That pointy screw driver is called a scratch awl. Was used for making a hole in wood so you can start a screw or scratching a mark on something. Sometimes called a screw awl.

Pryme Just ordered mine for my 04 crf450 been wanting to swap out the fender for awhile thanks for making a video about this

Thank you for sharing 👍

Bloody legend cam, cheers. Keep up the awesome work

Pryme Even though I don't have any honda bike, i'd be happy to have one so there's a reason for honda bike to build up in my life! You're the best Cameron! Your vids entertains me so badly! Hehe #KeepItPryme!!

So PRYME!! man it looks gooooooood!!! I need to do that to my 125🤤

Sick video!! You should Cut the back number plates, ur old 125 looked slimmer with them that way 🤙🏼🤙🏼

PRYME I have an 07 cr125 I’ve been spending the past few months to return it to its former glory and this would certainly help. Love the look of that stadium plate so much haha

Got a 2000 cr250 I would love that fender for. PRYME!

Pryme hey Cameron your channel is the best i only found it a week ago and already watched have of your video i wish one day i could have the skill and do the things that you do. all the best for your marriage as well you awesome

Pryme! Just ordered my front plate bracket for my 02 CR250. Super stoked!

A garage tour would be pryme

Thank you so much for this video! Now my 01 CR250 can look like it rolled off the showroom floor yesterday!

Pryme Love your videos

Pryme Love your videos man they really entertain me

I have put a front fender and number plate of Honda CR 2018 in my Kawasaki KLX 150 big whell Indonesian version. Even it a different brand but it still awesome.😀😀😀

Pretty sweet brackets. Wish i had a 2 stroke, still kickin my 4stroke 250. By the way if you remember my last comment, we finally got the 99 xr100 running, new petcock, carb clean & rebuild , few other things kicks first go!

Another awesome video, keep it up Cam. 🤙🤙

Thank for the PRYME insight. I have a 01 cr125 had the cylinder done and new head. All your videos are really helpful. Thanks 63v

Pryme, loves the vids Cameron!

Bikes are looking good , looking PRYME . Keep making updates for the older bikes 😄. I love my 2001 cr 250's but the plastics were looking dated , this will help !

what do you think about a yz 125 2004 for $1500 decent condition? would you buy it as a first build bike?

got to be a cr500 next hasn’t it? or maybe a 480 air cooled?

🔥 as always

You should try cerakote clear coat on bare aluminum frame or swingarm. I looks awesome and protects that bare aluminum. Wear a mask this stuff is STRONG.

So glad i subbed great content

I've been looking at these front end kits but I always think my 07 Cr front fender looks way better than all these new 2016-2020 styles

Pryme mate your bike looks sick as

I have a CR125 2001 love it I’m putting a CRF450 front number board and front mudguard on it 😁 can u change anything about the rear mudguard??? 😮

Hi cam i know you did a jetting video but could you just in short tell me why i have so much spooge on my kx.. is it mainly jetting or is it my 32:1 ratio when belray h1r is rated for 40:1 and up?

Nice upload dude!

Granted it was stolen before I got to it but had a ‘13 RMZ250 and bought the ‘19 RMZ450 front fender and number plate and was looking for a bracket to install it. Just a thought about maybe branching out to other brands. Don’t worry, replaced the RMZ with a CRF450R though, haha.

PRYME! BRAVO..its my dream BIKE!!!!

Pryme. I love you channel I just bought a 2003 cr250 and I'm hoping to do a build kinda like yours.

Nice, I have an old crf 450 2003 that could be doing with a makeover would be nice to no what I could buy to make it look newer 👍

More uploads pls 😂 love the vids

"Pryme" I'll have to order up another bracket, they make these bikes look so clean...... quick question, will the 2000-2003 bracket work with a 2002 crf450r... love the videos keep it up🤘

Pryme That’d look sick on my 04 cr125

Pryme Bikes are looking rad man🤙🏽 I just got into motocross this year and Im absolutely lovimg it

Pryme🤘 man this will look so trick on my 01 I’ve never won one of these give aways yet but I’m not giving up! I just put brand new plastics and the 1996 Jeremy McGrath replica graphics kit on and sent my forks and shock off to race tech for a re-valve...exited to get this all together

Just did something similar to my yzf. It looks so clean

8mm drill bit not inch nice work I like it

PRYME 👌🏽

Pryme. Love ur vids bro;)

Do you have a video on how you trimmed your number plates? Nice conversion looks great

Pryme✊🏻

Pryme🤘🏼🙏🏼

Pryme. Love ur vids bro!

You always have the best bike builds can’t wait for some more keep it pryme

Pryme!! Love the bike so cool!

Pryme Looks amazing!!

Dam I wish I could do the giveaway but I live in Canada

I'm ready for you to do a full restore of a crf450r. DO IT!

Cam you should put black rims on that bike if you had black rims that bike it would be dialed. 😉😄

I think I'm going to do this with my CR

I know you said you didnt want to but... restore and build the CR125!!!

I've got a 1998 cr125, I'd need a full restyle kit to make it look new. I'm considering the ronnie mac graphics and calling it the screamin eaglet.

Pryme If i win I’m just gonna order a shirt so I can represent my man Cam! I’ll hang his numberplate on my wall too if I can get him to sign it

I have a KTM but I learn how to do alot from your videos thanks God bless you and your soon to be wife

Pryme Thank you for the video!

Not a big fan of the newer front end on older stock plastic bikes. Either you go full send with a TX or Polisport kit like you did on the 250 or you leave it completley stock imo.

Front fender looks nice but I don’t dig the stadium plates

Nice work!!!!

I just bought a 99 CR125r and I really do not like the plastics at all. The side plates are so big and the shrouds leave a lot to be desired. Starting with the front fender, I have a new 2010 restyle fender that I’ll be attaching, what would you do for the side panels and shrouds if it were your bike. I love the way your 05 turned out, that’s the look I’m after buddy.

This video is pryme:)

I have a 2004 CRF250r and they don't offer a restyle for it. I would prefer getting a kit but thinking on trimming the back plates so would love to see a video on going about it!

2001 Honda cr125 is there a whole bike restyle kit. All i find is 2002 and up. Your bikes are sweat i have been following and trying stuff on my bikes. You do a great job bro man. Keep it. Cancer sucks 2020. #fuckcancer

Chill bro ♥️🤘

Pryme.. awesome videos man! Keep them coming!

Pryme!! Looking good buddy. Could use that kit for my 05 CR125 build!!

I bought the same restyle fender as u but have a cr 125 01 and done the same as u said but the fender points down and dosent sit like yours