Traxxas Chevy Blazer ESS Dual Engine Sound Kit

Подписаться 4,1 тыс.

Просмотров 35 тыс.

50% 1

I am quite happy with how this install turned out and the big V-8 sound really adds to the scale realism of this truck. Here is a link to where I purchased it on Amazon:
Elikliv Engine Sound System Dual ESS Sense Innovations Plus Engine Sound Simulator for Axial SCX10/SCX10 II www.amazon.com/dp/B0872PZQ2J/...

Развлечения

Опубликовано:

29 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@jrojano1007me 3 года назад

SIr, thanks 1,000,000 times. Been an RC enthusiast since i was a kid. I got a little excited over this truck and the speaker .I forgot to take a pix of the wiring but glad I found this video.

@beyondthebluerc1 3 года назад

No problem, I’m glad I could help😁

@066motocross 2 года назад

Great video! It sounds much like the 383 stroker in my real 83 Chevy k10. It even sounds like my cheery bomb glasspacks through dual exaust! Very accurate recreation of the sound

@beyondthebluerc1 2 года назад

Thanks, this sound kit is definitely one of my favorite upgrades to this truck😁.

@isaacsrandomvideos667 3 года назад

This is awesome!

@GazVanDyk 4 года назад

I am fitting one of these to my bronco. I plan to power off the esc jst connector with y lead for light kit. hopefully there is enough juice in the 5000 3s lipo i run.

@rcflashcars 3 года назад

your car is cool! big like! 👍

@rctruckcanuck5495 4 года назад

sounds great. love the truck! sub'd

@beyondthebluerc1 4 года назад

Thanks😁

@michaelchristianson3179 3 года назад

It sounds awesome. I wish it would make shifting changes in the sound.

@beyondthebluerc1 3 года назад

Yeah, that would be cool👍

@frankthetank9332 3 года назад

It does when you are going a higher speed for longer time! Just pull the car up and try it!

@Top-Jimmy Год назад

@@frankthetank9332 How mate?

@JoeOvercoat 3 года назад

Can you describe how it performs when changing from Forward to Reverse? Do you have to pause when driving? for example if you switched directions more quickly at 14:21 or 16:33 would the sound unit lose sync? My ESS ONE+ will go to idle perfectly, but if I proceed to Reverse from Forward (and vice versa) too quickly it goes to idle and 'gets stuck'. That is, it fails to detect the throttle is being applied. To be fair it forces me to drive in a more scale fashion, as in 1:1 it takes a moment to shift from FWD to REV and we often ignore that scale effect.

@beyondthebluerc1 3 года назад

Yeah, my sound kit performs similarly. As long as you drive in a scale fashion it functions perfectly. However, if you mash the throttle to quickly from a stand still the sound kit will have to play catch up. Hope this helps😁

@Top-Jimmy Год назад

Really cool video... *SUBBED* Is this still the go to a year on guys? I've just bought a Traxxas TRX 4 Defender. I wanted to put a light bar on top of the roof rack along with some bright headlights for FPV at night with a DJI Air 03 unit. Also, Can the receiver be changed out? As I need to install an ELRS receiver Any suggestions? Would really appreciate it. Thanks and take care.

@beyondthebluerc1 11 месяцев назад

Cool, thanks for the sub. The TRx4 line up from Traxxas are all very capable rigs. Yes, the receiver can be switched out. You will probably need at least a 5 channel receiver due to the remote diff lockers and two speed transmission. I got a special edition Orange Spektrum DX5 Rugged from my wife this past Christmas. I have converted three rigs so far. My Vaterra V100 Camaro, Traxxas 4tec 3.0 Corvette Stingray and Traxxas Rustler 4x4 VXL are now running off my Spektrum DX5 Rugged.

@nj2033 2 года назад

I love how they offer hundreds of different sounds, and literally EVERYONE goes for the V8 haha

@beyondthebluerc1 2 года назад

Yeah, I thought about changing to a different sound font, but the V8 sound font just fits this rig perfectly😁.

@roadrash76 2 года назад

The V8 sound is one of if not the loudest sound the module has. I tried a few other and none mask the RC motor whine like the V8 sound.

@beyondthebluerc1 Год назад

@@roadrash76 Yeah, I totally agree😁

@sprather84 4 года назад

How heavy is it? Did it change the performance? It sounds Amazing

@beyondthebluerc1 4 года назад

It’s not very heavy at all and doesn’t negatively affect performance. Yeah, I agree the sound quality is amazing😁.

@josephamato6723 4 года назад

Thank you for the like

@beyondthebluerc1 4 года назад

No problem 😁

@rampagerc4194 3 года назад

I need the information for wheel well lights and the sound box

@edmundclark2088 2 года назад

does this come with any sounds pre-loaded, or do you have to down load any one you want?

@beyondthebluerc1 2 года назад

It comes with three sound fonts. You can down load many more if you want to of course😁.

@bobbysimpson5540 4 года назад

Awesome set up. Do you have this connected to the Battery? or somewhere else? Thanks

@beyondthebluerc1 4 года назад

Thanks😁. I have it connected to the battery through the receiver.

@mikejones3748 3 года назад

@@beyondthebluerc1 how faat would it go without upgrades, and you have a very cool truck.

@beyondthebluerc1 3 года назад

Mike jones Thanks🤗 It is geared low for torque, so with or without upgrades the top speed is the same. The drivetrain is tough and can handle a brushless system, but I prefer the stock brushed system for scale realism.

@ML-cz8td Год назад

@@beyondthebluerc1 Do you mean that you have the red power plug from the ESS connected to the red plug that is coming out of the ESC?

@beyondthebluerc1 Год назад

I plugged the red plug that the ESS kit provided and plugged it into the red plug on the Y-harness that was plugged into the ESC. I used one of my spare Y-harnesses so I could run the Traxxas light kit and the ESS Dual sound kit at the same time. I believe I purchased those red plug Y-harnesses on Amazon.

@u_t_d_s_h-1_a 4 года назад

Please tell me, where do I find that engine? It sounds awesome.

@beyondthebluerc1 4 года назад

I bought it on Amazon. Here is a link: SENSE INNOVATIONS ESS DUAL Plus Real Engine Sound Simulator For Axial SCX10 SCX10 II Wraith Traxxas TRX-4 #ESS DUAL www.amazon.com/dp/B074W5BZH2/ref=cm_sw_r_cp_api_i_lqyJDb0Z4Z678

@SuperWontroba 2 года назад

Thx for movie

@richardridley78 3 года назад

Hi do you have the part number for the Y adapter? I’m looking to get the LED kit so guessing would need if I get sound to?

@beyondthebluerc1 3 года назад

Here is the link to where I bought two different types of JST Y harnesses on Amazon: E-flite JST Female and 2 JST Male Parallel Y-Harness www.amazon.com/dp/B000FJJNAE/ref=cm_sw_r_cp_api_glt_fabc_MXB2V3S6SF20QPCMZQG9?_encoding=UTF8&psc=1 RC Dual Fan Wiring Harness - JST Plug Splitter -2M1F Plug & Play - This Harness Allows use of Two Fans Powered by Single Output on VXL ESC. - Premium Quality - www.amazon.com/dp/B00VXFNRB0/ref=cm_sw_r_cp_api_glt_fabc_AP57HFWXDMZS0G9D7P59?_encoding=UTF8&psc=1

@richardridley78 3 года назад

@@beyondthebluerc1 Cheers man, that’s sold out now, I’m UK based and found this TRAXXAS BEC Y HARNESS TRX2261

@drgeorgel 4 года назад

Can you fit the ESS Dual kit on the Traxxas UDR?

@beyondthebluerc1 4 года назад

I’m sure it could be modified to fit. It comes with Velcro as well as the plastic mounts. The plastic mounts probably won’t work, but Velcro should he the job done. I would probably try to use Velcro straps in addition to hold it down more securely.

@josephamato6723 4 года назад

you should tell the people who want to get the Ess Dual Engine kit how to get it i want one for my rc blazer and bronco thats cool

@beyondthebluerc1 4 года назад

I found it on Amazon, but Amainhobbies has it as well. Here is a link to where I found it on Amazon😁: SENSE INNOVATIONS ESS DUAL Plus Real Engine Sound Simulator For Axial SCX10 SCX10 II Wraith Traxxas TRX-4 #ESS DUAL www.amazon.com/dp/B074W5BZH2/ref=cm_sw_r_cp_api_i_go2ADbA3EFSAG

@sabresswords 4 года назад

Is it possible to run this off the reciever power if the reciever puts out 7.4 volts?

@beyondthebluerc1 4 года назад

You should be able to. Mine is powered through the receiver. The power supply I have installed is just for the light kit.

@sabresswords 4 года назад

I've got a gen 8 axe. And the bec for the esc puts out 6v or 7.4v to the reciever. I dont have that external jst dongle like you have on your traxxas. I was thinking about replacing the jst connector with a servo connector and plugging it right into the reciever on an open slot. What do you think?

@beyondthebluerc1 4 года назад

sabresswords 🤔 that might not work. You have to plug into the esc so that the engine revs will match actual throttle revs through the esc. You could make an adapter to plug into the JST connector on the sound system and then plug into the receiver. That way you aren’t cutting wires and voiding the warranty on the ess dual sound system. Is there a wire or port on the Gen8 esc that you can make an adapter for and plug into on your Gen8 esc?

@sabresswords 4 года назад

@@beyondthebluerc1 no extra port on the axe esc. But the adapter from the jst connector on the sound system was my idea. IE, jst to servo plug adapter and then plug that into a spare port on the reciever. I knew about the Y plug that goes to the throttle channel. I was talking about the power lead. I dont want to have to power it directly off the battery if I dont have to. I run ec5 connectors and they're a bitch to make jumpers for.

@beyondthebluerc1 4 года назад

sabresswords Oh ok sounds good. I don’t see why using a separate battery as a power source wouldn’t work.

@apocalypsezombyRC 4 года назад

Thats awesome! where did you get your interior?

@beyondthebluerc1 4 года назад

I found it on Amazon. Here is a INJORA New RC Car Interior Decoration for 1/10 Axial SCX10 II 90046 90047 Cherokee Body Car Shell (Black & Transparent) www.amazon.com/dp/B07MKJH7YY/ref=cm_sw_r_cp_api_i_t8K.EbVQ9FY9A

@apocalypsezombyRC 4 года назад

@@beyondthebluerc1 Thank you!!!

@beyondthebluerc1 4 года назад

Apocalypse Zomby No problem😁👍

@tomwangerin3573 4 года назад

What is the sound called on the RCPlus software?

@beyondthebluerc1 4 года назад

The sound font I am using in this vid is called Big V8, which is one of the sound fonts that comes preinstalled. At some point I do want to download some other sound fonts and install them. I have other projects I want to get done and this one is low on the priority list. Plus, I honestly just keep forgetting to do it🤪.

@baxterhopson9010 4 года назад

I’ve got the exact same rc with the same bead locks lol

@beyondthebluerc1 4 года назад

Nice👍

@bwh8226 4 года назад

Where did you get this exact system

@beyondthebluerc1 4 года назад

I bought it on Amazon, but unfortunately they are sold out at the moment.

@grandwaha 4 года назад

Ha! At need to work on that clutch foot at 5:28

@beyondthebluerc1 4 года назад

Lol🤣 Good one🤪

@outlawfpv1551 3 года назад

Which interior did you use?

@beyondthebluerc1 3 года назад

INJORA RC Car Interior Decoration RC Accessories for 1/10 RC Crawler Axial SCX10 II 90046 90047 Cherokee Body Car Shell (Black) www.amazon.com/dp/B073GK946B/ref=cm_sw_r_cp_api_glt_fabc_7XP39E6Y4JR0P719Y7GB?_encoding=UTF8&psc=1 This is what I bought, but I believe it is a basically a pre painted pro line interior.

@charlesjeffreys4240 7 месяцев назад

What’s the scale of the truck?

@beyondthebluerc1 7 месяцев назад

It’s a 1/10th scale rig😀.

@BIGGBULLxxx 3 года назад

It sounds good but it seems ro turn off by itself to quickly. Would you like to sell it?

@haroldrockhill5631 3 года назад

You can program it to stay on longer.

@dano4572 4 года назад

now they need a shift kit and a chirp" gear change sound!!!!!!!!!!!!!!!!!! AND A LINE LOCK!! and smokin rear tires!!!!! just sayin

@bryanclark1058 4 года назад

Do to come with a charger

@beyondthebluerc1 4 года назад

It doesn’t require a charger. It plugs into the truck’s esc and receiver getting power from whatever battery you are using to power the truck itself. The sound kit can be run on a separate battery though and would require a charger for the battery you choose. I don’t feel it is necessary though if you are running a lipo as the main power source. This sound kit requires very little power to operate. I run a 3s lipo in my Blazer.

@tiikerilindstrom7273 4 года назад

What is part number, Thanks

@beyondthebluerc1 4 года назад

Here is a link to it on Amazon🤗😁👍 Elikliv Engine Sound System Dual ESS Sense Innovations Plus Engine Sound Simulator for Axial SCX10/SCX10 II www.amazon.com/dp/B0872PZQ2J/ref=cm_sw_r_cp_api_i_TkiTEb84MWR3J

@zeekmx1970 2 года назад

I know you want that advanced light kit so don't even play me.

@beyondthebluerc1 2 года назад

Yup, it’s been installed a few months ago🤪

@barricaderc7007 4 года назад

Too easy. Looks like that’s gonna be next on my blazer

@beyondthebluerc1 4 года назад

Nice! You won’t be disappointed😁

@EZ4U2Say11 3 года назад

All I can hear is crickets

@beyondthebluerc1 3 года назад

Yup, it was an unusually calm evening when I filmed this. The crickets were telling me to hurry up and fire up that Blazer🤪

@EZ4U2Say11 3 года назад

So I got one today I dunno how to change sounds on it

@beyondthebluerc1 3 года назад

EZ4U2Say11 It’s been a while, but I think that while the sound kit is powered up and running you have to press the “-“ button for a couple seconds to change sound fonts. Hold it down 1 beep is the first sound font and hold it down again 2 beeps is the second sound font. You can also plug it into a computer and download different sound fonts. The sound kit comes with 2 engine noise sound fonts. I am using the big V8 sound font.