Traxxas UDR Upgrades!

Подписаться 362

Просмотров 14 тыс.

50% 1

I told you I would deck my UDR to the rafters with upgrades, didn't I? This is the first stint of said upgrade spree: installing working fans, Pre-run check, alloy beadlock wheels, Vitavon rear axle mod, and a bit of a rip at the end.
Enjoy!
Buy your RC upgrade parts here: upgraderc.be/?ref=rcwb110
Enter the Coupon Code RCWB110 and get 5% off!
You're welcome!
Please consider joining Patreon, and gain access to exclusive content: / mcevoy
Here are a few of the parts I have already installed:
Electric fans x2:
www.ruddog.eu/RUDDOG-Fan-40mm...
Vitavon rear axle
www.vitavon-racing.com/produc...
Vitavon rear trailing arms
www.vitavon-racing.com/produc...
BF Goodrich tyres
traxxas.com/products/parts/8470
Rear diff oil
traxxas.com/products/parts/5040
Rear suspension springs, 1.250 rate
traxxas.com/products/parts/8441
Alloy front and center diff carriers
traxxas.com/products/parts/8581X
Clear body
traxxas.com/products/parts/8511
Chassis armor (will need fettling)
upgraderc.be/en/products/trax...
Brake disc hexes
upgraderc.be/en/products/4pcs...
Don't buy these lower front suspension arms because they suck!
upgraderc.be/en/products/udr-...
Shim set:
promodels.be/en/product/C-385...

Авто/Мото

Опубликовано:

6 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@rcwb110 2 месяца назад

All the parts are in the video description.

@bmurry4429 2 месяца назад

This is the best video I've seen on rc upgrades. You are so much more intelligent than 90 plus percent of people that create content for rc stuff on RU-vid. 👍

@rcwb110 2 месяца назад

Wow, thank you, that's really heartwarming!

@bossmannrctv2683 2 месяца назад

Agreed

@tjcben1 3 дня назад

Amazing build and attention to detail

@JIPPERR_1 2 месяца назад

The attention to detail here really speaks to me 👍Well done, looking forward to following your progress with this one.

@rcwb110 2 месяца назад

Thank you! Glad to know there are like-minded people out there. Welcome to my channel!

@bsuwolf6302 2 месяца назад

Wow, you do some quality work!!!! I'm Definatly excited to see more of your stuff!!!!

@rcwb110 2 месяца назад

Thank you for showing such enthusiasm! Much appreciated! Right now I'm driving it, so you can look forward to maintenance, and maybe some more upgrades down the line. So far, it is holding up really well. Next video drops tomorrow. Stay tuned! 🙂

@deltazero3796 2 месяца назад

Holy molly, sir, this looks awesome

@rcwb110 2 месяца назад

Thank you!

@jamiephillipps5413 2 месяца назад

Awesome!! I do love the udr!

@rcwb110 2 месяца назад

Me too!

@jlo96f3 2 месяца назад

Great detailed videos. Subscribed.

@rcwb110 2 месяца назад

Thank you so much! See you soon!

@offroad1911 Месяц назад

I just enjoyed your video and look forward to more UDR content, oh and became your 300th sub. 😊

@rcwb110 Месяц назад

Wow, that is so cool! Thank you for doing that, it means a lot to me. I do hope that you will find my content entertaining. Stay in touch!

@bossmannrctv2683 2 месяца назад

Vice nice build and great ideas. I want to see it run👍🏿👍🏿

@rcwb110 2 месяца назад

Thank you! You will see it next Friday, I went for a 6s Rip in the woods. I hope you like it!

@noobus1423 Месяц назад

A whole machine shop you got? Seriously neat and amazing production

@rcwb110 Месяц назад

Thank you! I am a professional mechanic, and I do this as a hobby. Lots of fun during the little bit of spare time that I have, and I enjoy producing stuff like this for all to enjoy. I am glad you like it! :-)

@makestuffbetter19 2 месяца назад

I love making UDR videos! You got a new sub from me!

@rcwb110 2 месяца назад

Welcome aboard! Looking forward to watching your videos!

@makestuffbetter19 2 месяца назад

@@rcwb110 Thank you!

@rcwb110 2 месяца назад

@@makestuffbetter19Subbed to your channel too, by the way. Good stuff!

@JoskMclaren Месяц назад

Honest and informative review. I guess the people who gave rave reviews for parts that are really good enough for what you pay are dubious.

@rcwb110 Месяц назад

Thanks JoskMclaren, I try my best to put useful information out there. Glad it helps. :-)

@TRConcepts-yz9vd 2 месяца назад

This is actually amazing!!!! Love the paint job too! Might have too add some of these to my custom trophy truck! New sub from me!👍👍👍love the content!

@rcwb110 2 месяца назад

Thank you, and welcome aboard! I am quite happy with the outcome of the paint job as well. It is the most complex one I have ever done. :-) Have fun with your trophy truck!

@TRConcepts-yz9vd 2 месяца назад

@@rcwb110 thank you for the kind reply 😊

@carbonarne675 2 месяца назад

grat camera work!

@rcwb110 2 месяца назад

Thank you, I try my best.

@Rcloverofficial 2 месяца назад

Awesome 😮

@rcwb110 2 месяца назад

Thanks 🤗

@balintgyulay425 2 месяца назад

wow it was nice video, subscribed.

@rcwb110 2 месяца назад

Thanks and welcome!

@gm11906 Месяц назад

Great work! Looking forward to your channel growth! The limited slip via grease slips with more rpm and acts like an open diff as the higher rpm overcomes the grease resistance, at this scale a real limited slip and clutch pack seems possible! How long did the shrink tube last, the torque of the nut really jams the pins deep inside the hex, so it may last a while?

@rcwb110 Месяц назад

Thank you for your support, it is highly appreciated! Shrink tube is still going strong. Hasn't moved yet. It can easily be renewed if it fails, however. And the limited slip with 20.000.000 silicone seems to hold up its promises so far. I am quite happy with it. I haven't touched the front yet, still testing as it is.

@TheCynabal 2 месяца назад

I put silicone ear plugs in my Xmaxx center diff instead of that 20mill gel, pretty common cheap and cheerful mod.

@rcwb110 2 месяца назад

As long as it works, that's all that matters. :-)

@traxxasfans 2 месяца назад

Great video very interesting I have just subscribed to your channel

@rcwb110 2 месяца назад

Thanks and welcome! I hope you will find future videos just as interesting.

@harlyquin 2 месяца назад

3:53 you did an amazing job there buddy, i always thought that same about vanquish parts, for how expensive they are why are they a dull flat grey color

@rcwb110 2 месяца назад

Thank you! I am really happy with the outcome after so many hours of work.

@jcf8678 21 день назад

What did you install for your lower trailing arms, brand , and what brand are your beadlock rims ?

@rcwb110 20 дней назад

Hi. The links to all the parts are in the description. The wheels are no longer in stock, but I am sure that a quick search on the web will reveal a shop who has them.

@toolbaggers 2 месяца назад

"You can always return your order within 14 days of arrival" - UPGRADERC I hope you got your money back on the suspension arms.

@rcwb110 2 месяца назад

I know. The thing is, I have so little free time that I waited until I had all the parts before working flat out to put them all together. The 14 days had past by then. So now they gather dust on the corner of the work bench. Live and learn.

@extec101 Месяц назад

@@rcwb110 what manufacturer did you get the arms from? UDR owners need do avoid those.

@rcwb110 Месяц назад

@@extec101 All the parts are linked in the description.

@ken-kamm 2 месяца назад

How did you seal the axle case so it would hold fluid properly?

@rcwb110 2 месяца назад

You can find the detailed video on Patreon: www.patreon.com/mcevoy The first version I used didn't hold up as well as I expected, and I have now found a much better way. Video about that will be coming soon.

@alexperez6502 2 месяца назад

What beadlock wheels are those I’m not seeing them in the discription

@rcwb110 2 месяца назад

They are no longer available where I bought them, but I have found the same on ebay: www.ebay.co.uk/itm/364065622476 They are really cool. Well made and easy to assemble.

@Marcoskicks 2 месяца назад

Subbed!

@rcwb110 2 месяца назад

Thanks Marco, much appreciated!

@joepvandenberg1271 2 месяца назад

what beatlocks did you use?

@rcwb110 2 месяца назад

Links to all the parts are in the video description.

@toolbaggers 2 месяца назад

The rough aluminum surface acts as a better heatsink than a smooth polished one. But that's not why Vtvo did that. The rough surface also means it was much cheaper to machine.

@rcwb110 2 месяца назад

I absolutely agree with both your statements. It heats up, but you can't say it gets hot. It's just lukewarm. Still, the ribs provide more surface contact with the surrounding air (but man does it look terrible!). And yes, it makes machining quicker, so is much more profitable for them.

@nemesis8664 Месяц назад

Best upgrade for that thing is for it to hit the trashcan.

@rcwb110 Месяц назад

I suppose you have good reasons for making such a suggestion? Would you care to elaborate, so people can better understand?

@carbonarne675 2 месяца назад

great video! german? to be honest i liked the finish of the Axle... but i appriciate the work

@rcwb110 2 месяца назад

Thanks! I am of Scottish descent, and live in Belgium.

@SebastianLong 2 месяца назад

Many of the upvrade parts are hit and miss. Some of them very expensive. TREAL parts fit most often perfectly but they only make wheels for the UDR now. I used to use my UDR so much that many of the parts I installed have worn out and ive been putting the stock parts back onto it that i had originally taken off. I would replace the parts with the aftermarket part i put onto it but many, like the TREAL parts arent any longer made. Aside from that, i dont use it that much anymore. Yours looks pretty dang good. Mine only looked that good for a week cause i absolutely thrash on my RCs from day one.with my rc collection, i only put on aftermarket parts if it breaks more than twice or it a better choice over stock, like most of the electronics in RTRs, or a metal bellcrank vs plastic.

@rcwb110 2 месяца назад

Thanks for your input. :-)

@harlyquin 2 месяца назад

11:22 what brand are these?, so we know what not to buy

@rcwb110 2 месяца назад

Links to all the parts are in the description. :-)

@Rc_cars5 2 месяца назад

That chassis skin could’ve been for a different version?

@rcwb110 2 месяца назад

I bought a clear body and painted it myself. How do you like it? 🙂

@Rc_cars5 2 месяца назад

Epic

@rcwb110 2 месяца назад

@@Rc_cars5Thank you! Much appreciated! It was good fun to do.

@andyb9994 2 месяца назад

Great build you do nice work, just make sure to say the name of the crap parts, we dont want anyone else to order junk.....that sucks you had to find.out about those parts that way....Great build looks amazing 💯

@rcwb110 2 месяца назад

Links to all the parts are in the video description. Even the crappy ones. :-) Thanks for stopping by!

@andyb9994 2 месяца назад

@@rcwb110gotcha I'm looking forward to more vids 💯

@rcwb110 2 месяца назад

@@andyb9994I produce videos on top of my daytime job, so don't worry if I don't post every week, as the job has a tendency to get in the way. lol. Keep an eye on the community tab, Instagram and if you feel like it, Patreon. Take care, and I am grateful to have you on board!

@RYNOCIRATOR_V5 Месяц назад

Were those Al front arms also Vitavon? I'm very surprised they were so bad, Vitavon is second only to M2C Racing. Check out the anti-roll bars Vitavon do, the standard Traxxas ones are shitty and break very easily, especially the front one; it can snap just from you snaking the truck down a road at low speed.

@rcwb110 Месяц назад

Hi! Nope, not Vitavon. Link is in the video description. Good to know about those ARB's!

@RYNOCIRATOR_V5 Месяц назад

@@rcwb110 Ah I see, that explain it. I would avoid any more metal arms if I were you, you need the flex of the plastic, otherwise things will bend or snap. If you want to go insane though Vitavon even do an entirely redesigned _chassis_ in 7075 Al, very expensive!

@rcwb110 Месяц назад

Indeed, a bit of flex is much better than breaking something. I did see that chassis. Crazy expensive. And it must be insanely heavy, too. No, from now on I think I will do moderate upgrades along the way, I've done the top notch crazy stuff already. Hehe. Time to enjoy it! :-)

@RYNOCIRATOR_V5 Месяц назад

@@rcwb110 Good bet mate, love the rig, looks fantastic!

@rcwb110 Месяц назад

@@RYNOCIRATOR_V5 Thank you!

@jeepmanxj Месяц назад

You don't want aluminum front arms. I've seen so many of them broken I can't imagine dealing with bent arms and breaking the pins and bulkheads from aluminum arms.

@rcwb110 22 дня назад

Absolutely. A bit of flew is welcome, in hindsight, and this is provided masterfully by the original parts.

@mehimrc1314 2 месяца назад

Who knew that vitavon would let parts out the door looking like 3D prints 😂 that's astonishingly bad. And their mega priced arms were a joke, who's been overrating that company? The floor pans are the prime example of where quality needs to be a must, hope one doesnt rip out. All in all you've personally transformed that car into more spectacular looking beast. Dont forget a strongly worded email to vitavon and demand a full refund on parts 👍

@rcwb110 2 месяца назад

Parts other than the rear axle and lower rear suspension links have been sourced elsewhere, but indeed, I was not too happy with the finish of that axle, given what was paid for it. That's just me though, most consumers seem happy with it as it is... As for the rest, well, that's cheap parts for you. Not much R&D, except if it stands for Ripping Dollars off of you. Live and learn.

@mehimrc1314 2 месяца назад

@@rcwb110 mega madness with these parts companies brother, we'll do the RnD when the parts arrive 👍 That must be both of us parts need that final finish 3D look must mean strength 😆 Either way you've made a great looking car out of the box 💪👍

@rcwb110 2 месяца назад

@@mehimrc1314Thank you, brother! Looking forward to see what you've been up to as well. 🙂